Resources
A stationary laser directs a horizontal beam at a flat vertical mirror, reflecting it back along its original path. The mirror is then rotated about a vertical axis through its center by an angle of . A student incorrectly assumes that the reflected beam also turns by . Calculate: (a) the true angular rotation of the reflected beam, and (b) the resulting lateral shift of the reflected laser spot on a target screen placed perpendicular to the original beam at a distance of from the mirror rotation axis.
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Angular Rotation of the Reflected Beam
- Initial Alignment and Law of Reflection: Initially, the incident ray is perpendicular to the mirror surface. The angle of incidence relative to the normal is: By the law of reflection (), the reflected beam reflects directly back along its original path at .
- Effect of Rotating the Mirror: When the mirror is rotated by an angle , the normal vector perpendicular to the mirror's surface also rotates by the same angle . Since the incoming laser beam remains stationary, the new angle of incidence relative to the new normal is:
- Determining the Deflection Angle: According to the law of reflection, the new angle of reflection is equal to the new angle of incidence: The total angle between the incident ray and the reflected ray is the sum of the angles on either side of the normal: Substituting :
Common Pitfall: A frequent mistake is assuming that rotating the mirror by shifts the reflected beam by . Because both the angle of incidence and the angle of reflection increase by relative to the mirror normal, the reflected beam turns through twice the mirror's angle of rotation ().
Part (b): Lateral Shift of the Reflected Spot on the Screen
- Geometric Relationship: The target screen is perpendicular to the original beam line at a distance from the mirror's axis of rotation. The reflected ray deviates from this original beam axis by the angle .
- Calculating the Displacement : Applying the right-triangle trigonometric relationship: Rearranging to solve for the lateral displacement : Substitute and :
Typical errors
01 The student assumes the reflected beam rotates by the same angle as the mirror (Δθ_ray = φ = 14.5°), leading to an underestimated lateral shift.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
When a flat mirror rotates by an angle , its surface normal also rotates by . Because the law of reflection requires relative to the new normal, the total angular deflection of the reflected ray is .
- Step 2Correct
Your trigonometric setup is correct, but substituting the un-doubled angle propagated the error to your final distance.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the lateral shift on the screen follows the right-triangle relation .
You performed the trigonometric evaluation and decimal arithmetic accurately for the angle you chose.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating mirror tilt with reflected ray deflection by overlooking that rotating the mirror turns the normal line, which simultaneously alters both the angle of incidence and the angle of reflection by .
REASONING PATH
Your ACEpath teacher’s suggested approach- Rotating Mirror Ray Deflection
A mirror rotated by angle rotates the reflected ray by when the incident beam remains fixed.
Always draw the rotated normal first: and , giving total beam deflection .
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b)
02 The student uses the sine function instead of the tangent function to calculate the lateral deflection on the flat screen, confusing the perpendicular opposite side with the hypotenuse.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In the right triangle formed by the original beam path (adjacent side ) and the flat screen (opposite side ), the ratio of to is given by the tangent function: . Using the sine function mistakenly treats the perpendicular distance to the screen as the hypotenuse.
- Step 3Correct
Your arithmetic follows correctly from using the sine function, but the numerical value is incorrect due to the trigonometric error in the preceding step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the reflected ray turns through twice the mirror rotation angle: .
You accurately substituted the given distance and evaluated your chosen trigonometric expression.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou chose instead of when relating the lateral spot shift on a flat screen to the adjacent distance.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the adjacent leg of the right triangle (the fixed perpendicular distance to the screen) with the hypotenuse (the actual path length of the deflected beam to the screen), leading to the incorrect formula rather than .
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Adjacent vs. Hypotenuse on a Flat Screen
When a beam strikes a flat screen perpendicular to the baseline at distance , the baseline is the adjacent side of the right triangle, making .
Always sketch the right triangle and verify whether the known distance is along the original axis (adjacent leg) or along the slanted ray (hypotenuse).
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the right-triangle relation .
Solve for the lateral displacement: .
Evaluate: .
(a) ; (b)
03 The student uses the small-angle approximation s = D · Δθ_ray in radians, but enters the angle in degrees directly without converting to radians.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You multiplied the distance directly by the angle in degrees. For a flat screen perpendicular to the original beam, the right-triangle geometry requires . Furthermore, any direct product formula relating radius and angle () requires to be expressed in radians, not degrees.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that rotating the mirror by doubles the deflection angle of the reflected ray.
You accurately calculated the reflected beam's deflection angle as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeMultiplying a linear distance directly by an angle in degrees produced an unphysically large displacement of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou substituted an angle in degrees into an arc-length-style formula without converting to radians, and you bypassed the tangent function needed for a flat screen.
REASONING PATH
Your ACEpath teacher’s suggested approach- Flat Screen vs. Circular Arc
On a flat screen at normal distance , the lateral shift is , whereas on a circular cylindrical screen it is the arc length (with in radians).
Draw the right triangle formed by the original beam axis, the screen, and the deflected beam to identify .
- Angle Units in Formulas
Whenever an angle appears outside a trigonometric function (such as in or ), it must be expressed in radians ().
Always convert degree measures to radians before performing direct algebraic multiplication.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the right triangle for the flat screen: .
Rearrange for lateral shift: .
Evaluate using : .
(a) ; (b)
Lock it in
If a stationary light ray strikes a plane mirror and the mirror rotates by an angle , by what angle does the reflected ray rotate?
. Rotating the mirror by rotates the surface normal by , increasing both the angle of incidence and reflection by .
Similar question
A stationary horizontal laser beam strikes a flat vertical mirror perpendicularly. The mirror is rotated by about a vertical axis. Find the angular deflection of the reflected ray and its spot displacement on a wall away.
Answer
; .
In an optical lever setup, a light beam reflects off a mirror onto a scale at distance . If the light spot moves by a distance of , through what angle did the mirror rotate? (Assume small angles where ).
Answer
Beam rotation: . Mirror tilt: (or using the small-angle approximation ).
A beam of light is incident at an angle of to the normal of a flat mirror. The mirror is then tilted by in the direction that decreases the angle of incidence. What is the total angle through which the reflected beam rotates?
Answer
The reflected beam rotates by . The new angle of incidence is , so the angle between the fixed incident ray and the new reflected ray changes from to , a change of exactly ().