Resources

A laboratory centrifuge rotor accelerates biological samples at an operational rate of 15,000 rpm15{,}000\text{ rpm} (revolutions per minute). A blood sample is placed in a test tube such that the cellular sediment settles at a radial distance of r=8.50 cmr = 8.50\text{ cm} from the central axis of rotation. Calculate (a) the angular velocity ω\omega in rad/s\text{rad/s}, (b) the linear tangential speed vv in m/s\text{m/s}, and (c) the centripetal acceleration expressed in multiples of standard earth gravity (i.e., in units of gg, where g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer and steps

Final answer

(a) ω=1.57×103 rad/s\omega = 1.57 \times 10^3\text{ rad/s}; (b) v=134 m/sv = 134\text{ m/s}; (c) ac=2.14×104 ga_c = 2.14 \times 10^4\text{ }g

Steps

Part (a): Angular Velocity (ω\omega)

The rotational frequency is given in revolutions per minute (rpm\text{rpm}). To convert revolutions per minute into radians per second (rad/s\text{rad/s}), use the conversion factors 1 rev=2π rad1\text{ rev} = 2\pi\text{ rad} and 1 min=60 s1\text{ min} = 60\text{ s}:

ω=15,000 rev/min×2π rad1 rev×1 min60 s\omega = 15{,}000\text{ rev/min} \times \frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}}

ω=15,000⋅2π60=500π rad/s≈1.57×103 rad/s\omega = \frac{15{,}000 \cdot 2\pi}{60} = 500\pi\text{ rad/s} \approx 1.57 \times 10^3\text{ rad/s}


Part (b): Linear Tangential Speed (vv)

First, convert the radial distance from centimeters to meters: r=8.50 cm=0.0850 mr = 8.50\text{ cm} = 0.0850\text{ m}

The relationship between linear tangential speed and angular velocity is: v=ω⋅rv = \omega \cdot r

Substitute the unrounded value of ω=500π rad/s\omega = 500\pi\text{ rad/s}: v=(500π rad/s)(0.0850 m)≈133.52 m/sv = (500\pi\text{ rad/s})(0.0850\text{ m}) \approx 133.52\text{ m/s}

Rounded to three significant figures: v≈134 m/sv \approx 134\text{ m/s}


Part (c): Centripetal Acceleration (aca_c) in Multiples of gg

The centripetal acceleration for circular motion directed radially inward is given by: ac=ω2r=v2ra_c = \omega^2 r = \frac{v^2}{r}

Substitute ω\omega and rr: ac=(500π rad/s)2(0.0850 m)≈2.097×105 m/s2a_c = (500\pi\text{ rad/s})^2(0.0850\text{ m}) \approx 2.097 \times 10^5\text{ m/s}^2

To express this acceleration in multiples of standard earth gravity (g=9.80 m/s2g = 9.80\text{ m/s}^2): acg=2.097×105 m/s29.80 m/s2≈2.14×104\frac{a_c}{g} = \frac{2.097 \times 10^5\text{ m/s}^2}{9.80\text{ m/s}^2} \approx 2.14 \times 10^4

Therefore, the acceleration is: ac≈2.14×104 ga_c \approx 2.14 \times 10^4\text{ }g

Common Pitfall: Be careful not to use rr in centimeters when computing linear speed or acceleration; doing so would overestimate the acceleration by a factor of 100100.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the angular velocity or speed when calculating centripetal acceleration, computing rω instead of rω² in subquestion (c).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=15000×2π60=500π≈1571 rad/s\omega = 15000 \times \frac{2\pi}{60} = 500\pi \approx 1571\text{ rad/s}

  2. Step 2

    r=8.50 cm=0.085 m⟹v=rω=0.085×1571=133.5 m/sr = 8.50\text{ cm} = 0.085\text{ m} \Longrightarrow v = r\omega = 0.085 \times 1571 = 133.5\text{ m/s}

  3. Step 3

    ac=rω=0.085×1571=133.5 m/s2a_c = r\omega = 0.085 \times 1571 = 133.5\text{ m/s}^2

    Correct

    ac=ω2r=(500π rad/s)2(0.0850 m)≈2.10×105 m/s2a_c = \omega^2 r = (500\pi\text{ rad/s})^2(0.0850\text{ m}) \approx 2.10 \times 10^5\text{ m/s}^2

    You used ac=rωa_c = r\omega, which is the formula for tangential speed vv, rather than centripetal acceleration ac=rω2=v2ra_c = r\omega^2 = \frac{v^2}{r}.

  4. Step 4

    acg=133.59.80≈13.6 g\frac{a_c}{g} = \frac{133.5}{9.80} \approx 13.6\text{ }g

    Correct

    acg=2.097×105 m/s29.80 m/s2≈2.14×104 g\frac{a_c}{g} = \frac{2.097 \times 10^5\text{ m/s}^2}{9.80\text{ m/s}^2} \approx 2.14 \times 10^4\text{ }g

    Your method of dividing by g=9.80 m/s2g = 9.80\text{ m/s}^2 was sound, but your result was affected by the missing squared factor in aca_c.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted units of rotational frequency from rpm\text{rpm} to rad/s\text{rad/s} accurately.

You converted the radius from centimeters to meters correctly.

You used the correct relationship between angular velocity and tangential speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between linear velocity and centripetal acceleration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You wrote ac=rωa_c = r\omega instead of squaring ω\omega (or squaring vv and dividing by rr). Note that dimensional analysis reveals rωr\omega has dimensions of velocity (m/s\text{m/s}), not acceleration (m/s2\text{m/s}^2). Centripetal acceleration requires ac=rω2=v2ra_c = r\omega^2 = \frac{v^2}{r}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional check on circular motion kinematics
  • Velocity has units of m/s\text{m/s} (v=rωv = r\omega), whereas acceleration must have units of m/s2\text{m/s}^2 (ac=rω2=v2ra_c = r\omega^2 = \frac{v^2}{r}).

  • Always check dimensions: if you compute acceleration, ensure ω\omega or vv is squared so that units come out to m/s2\text{m/s}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate centripetal acceleration using ac=rω2a_c = r\omega^2: ac=(0.0850 m)(500π rad/s)2≈2.097×105 m/s2a_c = (0.0850\text{ m})(500\pi\text{ rad/s})^2 \approx 2.097 \times 10^5\text{ m/s}^2.

  2. Divide by standard gravity g=9.80 m/s2g = 9.80\text{ m/s}^2: acg=2.097×1059.80≈2.14×104\frac{a_c}{g} = \frac{2.097 \times 10^5}{9.80} \approx 2.14 \times 10^4.

Final answer

(a) ω≈1.57×103 rad/s\omega \approx 1.57 \times 10^3\text{ rad/s}; (b) v≈134 m/sv \approx 134\text{ m/s}; (c) ac≈2.14×104 ga_c \approx 2.14 \times 10^4\text{ }g

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the twin formulas for centripetal acceleration: ac=v2r=ω2ra_c = \frac{v^2}{r} = \omega^2 r.

  • Perform a quick dimensional check whenever calculating an acceleration: verify that your units evaluate to meters per second squared before continuing.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert the radius from centimeters to meters, resulting in tangential speed and centripetal acceleration that are too large by a factor of 100.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=15000×2π60=1571 rad/s\omega = 15000 \times \frac{2\pi}{60} = 1571\text{ rad/s}

  2. Step 2

    v=rω=8.50×1571=13354 m/sv = r\omega = 8.50 \times 1571 = 13354\text{ m/s}

    Correct

    r=8.50 cm=0.0850 m  ⟹  v=rω=(0.0850 m)(500π rad/s)≈134 m/sr = 8.50\text{ cm} = 0.0850\text{ m} \implies v = r\omega = (0.0850\text{ m})(500\pi\text{ rad/s}) \approx 134\text{ m/s}

    You used the formula v=rωv = r\omega correctly, but you substituted r=8.50 cmr = 8.50\text{ cm} directly without converting it to meters. Standard SI units require distance in meters, so r=0.0850 mr = 0.0850\text{ m}.

  3. Step 3

    ac=rω2=8.50×(1571)2=2.098×107 m/s2a_c = r\omega^2 = 8.50 \times (1571)^2 = 2.098 \times 10^7\text{ m/s}^2

    Correct

    ac=rω2=(0.0850 m)(500π rad/s)2≈2.10×105 m/s2a_c = r\omega^2 = (0.0850\text{ m})(500\pi\text{ rad/s})^2 \approx 2.10 \times 10^5\text{ m/s}^2

    Your formula ac=rω2a_c = r\omega^2 is correct and your algebraic execution is sound, but the value is scaled up by 100100 due to the earlier unit error in rr.

  4. Step 4

    acg=2.098×1079.80≈2.14×106 g\frac{a_c}{g} = \frac{2.098 \times 10^7}{9.80} \approx 2.14 \times 10^6\text{ }g

    Correct

    acg=2.097×105 m/s29.80 m/s2≈2.14×104 g\frac{a_c}{g} = \frac{2.097 \times 10^5\text{ m/s}^2}{9.80\text{ m/s}^2} \approx 2.14 \times 10^4\text{ }g

    You correctly set up the ratio acg\frac{a_c}{g} to express the acceleration in terms of gg, but the final number inherits the factor-of-100 error from the unconverted radius.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted revolutions per minute to radians per second.

You selected the correct kinematic relationships v=rωv = r\omega and ac=rω2a_c = r\omega^2.

You correctly divided by g=9.80 m/s2g = 9.80\text{ m/s}^2 to express the final acceleration as a multiple of standard gravity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Unit Conversion

You substituted r=8.50r = 8.50 directly from the prompt instead of converting centimeters to standard SI meters (0.0850 m0.0850\text{ m}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit harmonization before substituting given values into SI kinematic equations. In mechanics, linear formulas linking rotational and translational motion (v=rωv = r\omega, ac=rω2a_c = r\omega^2) require all lengths to be in meters when angles are in radians and time is in seconds.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Harmonization Check
  • All dimensional quantities in rotational-translational bridge equations (v=rωv = r\omega, ac=rω2a_c = r\omega^2) must be in base SI units (meters, seconds, radians).

  • Before calculating, explicitly write down each given variable with its converted base SI unit: r=8.50 cm×1 m100 cm=0.0850 mr = 8.50\text{ cm} \times \frac{1\text{ m}}{100\text{ cm}} = 0.0850\text{ m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the radius to meters: r=8.50 cm=0.0850 mr = 8.50\text{ cm} = 0.0850\text{ m}.

  2. Calculate linear speed: v=rω=(0.0850 m)(1571 rad/s)≈134 m/sv = r\omega = (0.0850\text{ m})(1571\text{ rad/s}) \approx 134\text{ m/s}.

  3. Calculate centripetal acceleration: ac=rω2=(0.0850 m)(1571 rad/s)2≈2.10×105 m/s2a_c = r\omega^2 = (0.0850\text{ m})(1571\text{ rad/s})^2 \approx 2.10 \times 10^5\text{ m/s}^2.

  4. Convert to multiples of gg: acg=2.097×105 m/s29.80 m/s2≈2.14×104 g\frac{a_c}{g} = \frac{2.097 \times 10^5\text{ m/s}^2}{9.80\text{ m/s}^2} \approx 2.14 \times 10^4\text{ }g.

Final answer

(a) ω=1.57×103 rad/s\omega = 1.57 \times 10^3\text{ rad/s}; (b) v=134 m/sv = 134\text{ m/s}; (c) ac=2.14×104 ga_c = 2.14 \times 10^4\text{ }g

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out unit labels explicitly alongside numbers in intermediate calculation lines to catch unit mismatches early.

  • Double-check that all length quantities are in meters before evaluating kinematic formulas that yield meters per second (m/s\text{m/s}) or meters per second squared (m/s2\text{m/s}^2).

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets revolutions per minute as simply radians per minute, omitting the factor of 2π during the unit conversion to rad/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=1500060=250 rad/s\omega = \frac{15000}{60} = 250\text{ rad/s}

    Correct

    ω=15,000 rev/min×2π rad1 rev×1 min60 s=500π rad/s≈1.57×103 rad/s\omega = 15{,}000\text{ rev/min} \times \frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} = 500\pi\text{ rad/s} \approx 1.57 \times 10^3\text{ rad/s}

    You converted minutes to seconds by dividing by 6060, which gives revolutions per second (rev/s\text{rev/s}), but you did not multiply by 2π2\pi radians per revolution to convert into radians per second.

  2. Step 2

    r=0.0850 m  ⟹  v=rω=0.0850×250=21.25 m/sr = 0.0850\text{ m} \implies v = r\omega = 0.0850 \times 250 = 21.25\text{ m/s}

    Correct

    v=ωr=(500π rad/s)(0.0850 m)≈134 m/sv = \omega r = (500\pi\text{ rad/s})(0.0850\text{ m}) \approx 134\text{ m/s}

    You correctly converted r=8.50 cmr = 8.50\text{ cm} to 0.0850 m0.0850\text{ m} and applied the tangential speed formula v=rωv = r\omega, but the resulting value is low because of the earlier omission of 2π2\pi.

  3. Step 3

    ac=v2r=(21.25)20.0850=5312.5 m/s2  ⟹  acg=5312.59.80≈542 ga_c = \frac{v^2}{r} = \frac{(21.25)^2}{0.0850} = 5312.5\text{ m/s}^2 \implies \frac{a_c}{g} = \frac{5312.5}{9.80} \approx 542\text{ g}

    Correct

    ac=ω2r=(500π)2(0.0850)≈2.10×105 m/s2  ⟹  acg=2.10×1059.80≈2.14×104 ga_c = \omega^2 r = (500\pi)^2(0.0850) \approx 2.10 \times 10^5\text{ m/s}^2 \implies \frac{a_c}{g} = \frac{2.10 \times 10^5}{9.80} \approx 2.14 \times 10^4\text{ }g

    You used the correct equation for centripetal acceleration and divided correctly by g=9.80 m/s2g = 9.80\text{ m/s}^2, but this final answer is lower by a factor of (2π)2≈39.5(2\pi)^2 \approx 39.5 due to the initial conversion error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the radius from centimeters to meters as r=0.0850 mr = 0.0850\text{ m}.

You selected and applied the correct formula relating angular and linear speed, v=rωv = r\omega.

You correctly set up the centripetal acceleration relation ac=v2ra_c = \frac{v^2}{r} and accurately divided by gg to find multiples of standard gravity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission of 2π (rev to rad)

You divided by 6060 to convert minutes to seconds, but forgot that each revolution contains 2π2\pi radians.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing rotational frequency (ff in rev/s\text{rev/s}) with angular velocity (ω\omega in rad/s\text{rad/s}). Dividing rpm\text{rpm} by 6060 yields revolutions per second, which must still be multiplied by 2π rad/rev2\pi\text{ rad/rev} to obtain angular velocity in radians per second.

REASONING PATH
Your ACEpath teacher’s suggested approach
Converting rpm to rad/s
  • 1 rev=2π rad1\text{ rev} = 2\pi\text{ rad} and 1 min=60 s1\text{ min} = 60\text{ s}, so ω=rpm×2π60\omega = \text{rpm} \times \frac{2\pi}{60}

  • Multiply rotational speed given in rpm\text{rpm} by 2π60=π30\frac{2\pi}{60} = \frac{\pi}{30} to get rad/s\text{rad/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate angular velocity: ω=15,000×2π rad60 s=500π rad/s≈1.57×103 rad/s\omega = 15{,}000 \times \frac{2\pi\text{ rad}}{60\text{ s}} = 500\pi\text{ rad/s} \approx 1.57 \times 10^3\text{ rad/s}.

  2. Calculate tangential linear speed: v=rω=(0.0850 m)(500π rad/s)≈133.5 m/s≈134 m/sv = r\omega = (0.0850\text{ m})(500\pi\text{ rad/s}) \approx 133.5\text{ m/s} \approx 134\text{ m/s}.

  3. Calculate centripetal acceleration: ac=ω2r=(500π rad/s)2(0.0850 m)≈2.097×105 m/s2a_c = \omega^2 r = (500\pi\text{ rad/s})^2(0.0850\text{ m}) \approx 2.097 \times 10^5\text{ m/s}^2.

  4. Convert acceleration to multiples of gg: acg=2.097×105 m/s29.80 m/s2≈2.14×104 g\frac{a_c}{g} = \frac{2.097 \times 10^5\text{ m/s}^2}{9.80\text{ m/s}^2} \approx 2.14 \times 10^4\text{ }g.

Final answer

(a) ω≈1.57×103 rad/s\omega \approx 1.57 \times 10^3\text{ rad/s}; (b) v≈134 m/sv \approx 134\text{ m/s}; (c) ac≈2.14×104 ga_c \approx 2.14 \times 10^4\text{ }g

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out full conversion factors with units cancelling explicitly: (rev/min)×(2π rad/1 rev)×(1 min/60 s)(\text{rev/min}) \times (2\pi\text{ rad/1 rev}) \times (1\text{ min/60 s}).

  • Remember the standard shortcut formula: ω=Nπ30\omega = \frac{N\pi}{30}, where NN is the rotational speed in rpm.

Lock it in

Similar question

01

A compact disc with a radius of 6.0 cm6.0\text{ cm} spins at a constant rate of 600 rpm600\text{ rpm}. Calculate the centripetal acceleration at the outer rim in m/s2\text{m/s}^2.

Answer

ac≈2.37×102 m/s2a_c \approx 2.37 \times 10^2\text{ m/s}^2. Steps: ω=600×2π60=20π≈62.83 rad/s\omega = 600 \times \frac{2\pi}{60} = 20\pi \approx 62.83\text{ rad/s}; r=0.060 mr = 0.060\text{ m}; ac=ω2r=(20π)2(0.060)≈237 m/s2a_c = \omega^2 r = (20\pi)^2(0.060) \approx 237\text{ m/s}^2.

02

A fighter jet pulls out of a vertical dive along a circular arc of radius 800 m800\text{ m} at a constant speed of 240 m/s240\text{ m/s}. Determine the centripetal acceleration experienced by the pilot, expressed in multiples of gg (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

ac≈7.35 ga_c \approx 7.35\text{ }g. Steps: ac=v2r=2402800=57600800=72.0 m/s2a_c = \frac{v^2}{r} = \frac{240^2}{800} = \frac{57600}{800} = 72.0\text{ m/s}^2; in units of gg: 72.09.80≈7.35 g\frac{72.0}{9.80} \approx 7.35\text{ }g.

03

A small clinical centrifuge produces a centripetal acceleration of 800 g800\text{ }g at a radial distance of 12.0 cm12.0\text{ cm} from the central spindle. What rotational speed in rpm\text{rpm} is required to achieve this? (Use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

N≈2.44×103 rpmN \approx 2.44 \times 10^3\text{ rpm}. Steps: ac=800×9.80=7840 m/s2a_c = 800 \times 9.80 = 7840\text{ m/s}^2; r=0.120 mr = 0.120\text{ m}; ω=acr=78400.120≈255.6 rad/s\omega = \sqrt{\frac{a_c}{r}} = \sqrt{\frac{7840}{0.120}} \approx 255.6\text{ rad/s}; convert to rpm\text{rpm}: N=255.6×602π≈2441 rpmN = 255.6 \times \frac{60}{2\pi} \approx 2441\text{ rpm}.

Loading workspace…