Resources

A metallic surface has a measured work function of Φ=2.75 eV\Phi = 2.75\text{ eV}. (a) Determine the threshold wavelength λcutoff\lambda_{\text{cutoff}} in nm\text{nm} above which no photoelectrons are emitted regardless of incident light intensity. (b) If light of wavelength λ1=480 nm\lambda_1 = 480\text{ nm} irradiates the surface, state whether photoelectrons will be ejected, and determine Kmax⁡K_{\max} in eV\text{eV} (or state 0 eV0\text{ eV} if none are emitted). (c) If light of wavelength λ2=420 nm\lambda_2 = 420\text{ nm} irradiates the surface, determine Kmax⁡K_{\max} in eV\text{eV}. Use hc=1239.8 eV⋅nmhc = 1239.8\text{ eV}\cdot\text{nm}.

Answer and steps

Final answer

(a) λcutoff=451 nm\lambda_{\text{cutoff}} = 451\text{ nm}; (b) No emission occurs (Kmax⁡=0 eVK_{\max} = 0\text{ eV}); (c) Kmax⁡=0.20 eVK_{\max} = 0.20\text{ eV}

Steps

Part (a): Threshold Cutoff Wavelength

According to Einstein's photoelectric theory, the minimum energy required to eject an electron from a metal surface is the work function, Φ\Phi. The threshold (cutoff) frequency f0f_0 and threshold wavelength λcutoff\lambda_{\text{cutoff}} represent the minimum photon energy needed for emission:

Φ=hcλcutoff\Phi = \frac{hc}{\lambda_{\text{cutoff}}}

Rearranging to solve for the cutoff wavelength:

λcutoff=hcΦ\lambda_{\text{cutoff}} = \frac{hc}{\Phi}

Substitute the given values hc=1239.8 eV⋅nmhc = 1239.8\text{ eV}\cdot\text{nm} and Φ=2.75 eV\Phi = 2.75\text{ eV}:

λcutoff=1239.8 eV⋅nm2.75 eV≈450.84 nm\lambda_{\text{cutoff}} = \frac{1239.8\text{ eV}\cdot\text{nm}}{2.75\text{ eV}} \approx 450.84\text{ nm}

Rounding to the nearest whole nanometer gives:

λcutoff=451 nm\lambda_{\text{cutoff}} = 451\text{ nm}

Any incident light with a wavelength longer than 451 nm451\text{ nm} carries less photon energy than the work function Φ\Phi, preventing emission.


Part (b): Incident Light at λ1=480 nm\lambda_1 = 480\text{ nm}

The energy of a single incident photon is given by:

E1=hcλ1=1239.8 eV⋅nm480 nm≈2.58 eVE_1 = \frac{hc}{\lambda_1} = \frac{1239.8\text{ eV}\cdot\text{nm}}{480\text{ nm}} \approx 2.58\text{ eV}

Compare the photon energy to the work function:

  • E1=2.58 eV<Φ=2.75 eVE_1 = 2.58\text{ eV} < \Phi = 2.75\text{ eV} (or equivalently, λ1=480 nm>λcutoff=451 nm\lambda_1 = 480\text{ nm} > \lambda_{\text{cutoff}} = 451\text{ nm})

Because each photon delivers less energy than the minimum required to overcome the metal's binding potential:

  • No photoelectrons are ejected.
  • Therefore, Kmax⁡=0 eVK_{\max} = 0\text{ eV}.

Common Pitfall: Increasing the intensity of the light increases the number of photons per second, not the energy of individual photons. As long as λ>λcutoff\lambda > \lambda_{\text{cutoff}}, no electrons can escape regardless of brightness.


Part (c): Incident Light at λ2=420 nm\lambda_2 = 420\text{ nm}

Calculate the incident photon energy:

E2=hcλ2=1239.8 eV⋅nm420 nm≈2.95 eVE_2 = \frac{hc}{\lambda_2} = \frac{1239.8\text{ eV}\cdot\text{nm}}{420\text{ nm}} \approx 2.95\text{ eV}

Since E2>ΦE_2 > \Phi, photoelectrons are emitted. Using Einstein's photoelectric equation:

Kmax⁡=E2−ΦK_{\max} = E_2 - \Phi

Kmax⁡=2.95 eV−2.75 eV=0.20 eVK_{\max} = 2.95\text{ eV} - 2.75\text{ eV} = 0.20\text{ eV}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the threshold condition in part (b) and calculates a negative kinetic energy using K_max = E - Φ instead of setting K_max = 0 eV when no electrons are emitted.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λcutoff=hcΦ  ⟹  λcutoff=1239.82.75=450.8 nm\lambda_{\text{cutoff}} = \frac{hc}{\Phi} \implies \lambda_{\text{cutoff}} = \frac{1239.8}{2.75} = 450.8\text{ nm}

  2. Step 2

    E1=hcλ1=1239.8480=2.58 eVE_1 = \frac{hc}{\lambda_1} = \frac{1239.8}{480} = 2.58\text{ eV}

  3. Step 3

    Kmax⁡=E1−Φ=2.58−2.75=−0.17 eV  ⟹  Photoelectrons are ejected with Kmax⁡=−0.17 eVK_{\max} = E_1 - \Phi = 2.58 - 2.75 = -0.17\text{ eV} \implies \text{Photoelectrons are ejected with } K_{\max} = -0.17\text{ eV}

    Correct

    Since E1=2.58 eV<Φ=2.75 eVE_1 = 2.58\text{ eV} < \Phi = 2.75\text{ eV} (or λ1>λcutoff\lambda_1 > \lambda_{\text{cutoff}}), no photoelectrons are ejected, so Kmax⁡=0 eVK_{\max} = 0\text{ eV}.

    Kinetic energy cannot be negative. Because the photon energy 2.58 eV2.58\text{ eV} is insufficient to overcome the surface work function 2.75 eV2.75\text{ eV}, no emission takes place, which means Kmax⁡=0 eVK_{\max} = 0\text{ eV}.

  4. Step 4

    E2=hcλ2=1239.8420=2.95 eV  ⟹  Kmax⁡=E2−Φ=2.95−2.75=0.20 eVE_2 = \frac{hc}{\lambda_2} = \frac{1239.8}{420} = 2.95\text{ eV} \implies K_{\max} = E_2 - \Phi = 2.95 - 2.75 = 0.20\text{ eV}

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct relationship between cutoff wavelength and work function.

You accurately converted wavelengths into photon energies using the hchc constant.

You correctly applied the photoelectric equation in part (c) where emission is permitted.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Negative Kinetic Energy / Emission Threshold

You evaluated E−ΦE - \Phi blindly without first checking whether the incident photon energy meets the threshold requirement for ejection.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Einstein's photoelectric equation is conditional: Kmax⁡=max⁡(0,E−Φ)K_{\max} = \max(0, E - \Phi). A single photon interacts with a single electron. If E<ΦE < \Phi, the absorbed energy is insufficient to free the electron from the metal lattice, so no emission occurs and kinetic energy is undefined or physically 0 eV0\text{ eV}, never negative.

REASONING PATH
Your ACEpath teacher’s suggested approach
Threshold Condition Check
  • Photoelectric emission requires E≥ΦE \ge \Phi (or λ≤λcutoff\lambda \le \lambda_{\text{cutoff}}).

  • Before calculating Kmax⁡K_{\max}, compare EE against Φ\Phi. If E<ΦE < \Phi, immediately state that no electrons are ejected and Kmax⁡=0 eVK_{\max} = 0\text{ eV}.

Physical Bounds on Kinetic Energy
  • Kinetic energy for a free particle must satisfy K≥0K \ge 0.

  • If your subtraction yields a negative number, treat it as an alert that the threshold condition failed rather than reporting a negative kinetic energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the photon energy E1=2.58 eVE_1 = 2.58\text{ eV} with the work function Φ=2.75 eV\Phi = 2.75\text{ eV}.

  2. Notice that E1<ΦE_1 < \Phi (or λ1=480 nm>λcutoff=451 nm\lambda_1 = 480\text{ nm} > \lambda_{\text{cutoff}} = 451\text{ nm}).

  3. Conclude that photons do not have sufficient energy to liberate electrons from the metal surface.

  4. Set Kmax⁡=0 eVK_{\max} = 0\text{ eV} and state that no photoelectrons are emitted.

Final answer

(a) λcutoff=451 nm\lambda_{\text{cutoff}} = 451\text{ nm}; (b) No emission occurs (Kmax⁡=0 eVK_{\max} = 0\text{ eV}); (c) Kmax⁡=0.20 eVK_{\max} = 0.20\text{ eV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy-level diagram of the photoelectric effect to visualize how the work function acts as an energy barrier.

  • Practice checking the condition E≥ΦE \ge \Phi as a mandatory gate before computing numerical values for Kmax⁡K_{\max}.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the photoelectric equation by adding the work function instead of subtracting it, leading to an incorrect K_max = E + Φ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λcutoff=hcΦ=1239.82.75=450.8 nm\lambda_{\text{cutoff}} = \frac{hc}{\Phi} = \frac{1239.8}{2.75} = 450.8\text{ nm}

  2. Step 2

    λ1=480 nm>450.8 nm  ⟹  No photoelectrons are emitted, Kmax⁡=0 eV\lambda_1 = 480\text{ nm} > 450.8\text{ nm} \implies \text{No photoelectrons are emitted, } K_{\max} = 0\text{ eV}

  3. Step 3

    E2=hcλ2=1239.8420=2.95 eVE_2 = \frac{hc}{\lambda_2} = \frac{1239.8}{420} = 2.95\text{ eV}

  4. Step 4

    Kmax⁡=E2+Φ=2.95+2.75=5.70 eVK_{\max} = E_2 + \Phi = 2.95 + 2.75 = 5.70\text{ eV}

    Correct

    Kmax⁡=E2−Φ=2.95 eV−2.75 eV=0.20 eVK_{\max} = E_2 - \Phi = 2.95\text{ eV} - 2.75\text{ eV} = 0.20\text{ eV}

    You added the work function Φ\Phi to the photon energy instead of subtracting it. By conservation of energy, the incident photon energy is split into overcoming the binding energy plus the remaining kinetic energy: E=Φ+Kmax⁡E = \Phi + K_{\max}, which rearranges to Kmax⁡=E−ΦK_{\max} = E - \Phi.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used λcutoff=hcΦ\lambda_{\text{cutoff}} = \frac{hc}{\Phi} to determine the threshold wavelength.

You correctly applied the cutoff threshold criterion to deduce that no emission occurs for λ1=480 nm\lambda_1 = 480\text{ nm}.

You accurately computed the photon energy E2=2.95 eVE_2 = 2.95\text{ eV} for λ2=420 nm\lambda_2 = 420\text{ nm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Photoelectric Equation Sign Error

You accidentally added the work function rather than subtracting the energy cost of extraction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the energy budget relation (Ephoton=Φ+Kmax⁡E_{\text{photon}} = \Phi + K_{\max}) with its rearranged form leads to adding Φ\Phi rather than subtracting it, resulting in an unphysical kinetic energy larger than the incident photon energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Balance Sanity Check
  • The maximum kinetic energy Kmax⁡K_{\max} can never exceed the energy of the incoming photon EphotonE_{\text{photon}}.

  • Whenever you compute Kmax⁡K_{\max}, verify that Kmax⁡<EphotonK_{\max} < E_{\text{photon}} because part of the photon's energy is consumed just to free the electron.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall Einstein's photoelectric energy balance equation: E2=Φ+Kmax⁡E_2 = \Phi + K_{\max}.

  2. Rearrange for kinetic energy: Kmax⁡=E2−ΦK_{\max} = E_2 - \Phi.

  3. Substitute the photon energy and work function: Kmax⁡=2.95 eV−2.75 eV=0.20 eVK_{\max} = 2.95\text{ eV} - 2.75\text{ eV} = 0.20\text{ eV}.

Final answer

(a) λcutoff=451 nm\lambda_{\text{cutoff}} = 451\text{ nm}; (b) No photoelectrons are emitted (Kmax⁡=0 eVK_{\max} = 0\text{ eV}); (c) Kmax⁡=0.20 eVK_{\max} = 0.20\text{ eV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the photoelectric effect conceptually as an energy budget: Incoming Energy = Binding Energy Cost + Kinetic Energy.

  • Always perform a quick reality check on your final Kmax⁡K_{\max} value: it must be strictly less than the incident photon energy EE.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the relationship between energy and wavelength as direct proportionality, calculating threshold wavelength as λ_cutoff = Φ / hc.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λcutoff=Φhc=2.751239.8=0.00222 nm\lambda_{\text{cutoff}} = \frac{\Phi}{hc} = \frac{2.75}{1239.8} = 0.00222\text{ nm}

    Correct

    λcutoff=hcΦ=1239.8 eV⋅nm2.75 eV≈451 nm\lambda_{\text{cutoff}} = \frac{hc}{\Phi} = \frac{1239.8\text{ eV}\cdot\text{nm}}{2.75\text{ eV}} \approx 451\text{ nm}

    You inverted the relationship between cutoff wavelength and work function. Because E=hcλE = \frac{hc}{\lambda}, setting E=ΦE = \Phi gives λcutoff=hcΦ\lambda_{\text{cutoff}} = \frac{hc}{\Phi}, not Φhc\frac{\Phi}{hc}.

  2. Step 2

    E1=hcλ1=1239.8480=2.58 eV  ⟹  Since E1<2.75 eV, no photoelectrons are emitted, Kmax⁡=0 eVE_1 = \frac{hc}{\lambda_1} = \frac{1239.8}{480} = 2.58\text{ eV} \implies \text{Since } E_1 < 2.75\text{ eV}\text{, no photoelectrons are emitted, } K_{\max} = 0\text{ eV}

  3. Step 3

    E2=hcλ2=1239.8420=2.95 eV  ⟹  Kmax⁡=E2−Φ=2.95−2.75=0.20 eVE_2 = \frac{hc}{\lambda_2} = \frac{1239.8}{420} = 2.95\text{ eV} \implies K_{\max} = E_2 - \Phi = 2.95 - 2.75 = 0.20\text{ eV}

WHAT YOU DID WELL
Compliments from Your Teacher

You used E=hcλE = \frac{hc}{\lambda} correctly to evaluate incident photon energies in parts (b) and (c).

You properly identified the energy threshold condition for photoelectron emission.

You correctly calculated the maximum kinetic energy using Kmax⁡=E−ΦK_{\max} = E - \Phi.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated wavelength as directly proportional to energy rather than inversely proportional when rearranging the threshold equation Φ=hcλcutoff\Phi = \frac{hc}{\lambda_{\text{cutoff}}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rearrange Inversely Proportional Equations
  • If y=kxy = \frac{k}{x}, then multiplying both sides by xx and dividing by yy yields x=kyx = \frac{k}{y}.

  • Start from Φ=hcλcutoff\Phi = \frac{hc}{\lambda_{\text{cutoff}}}, multiply by λcutoff\lambda_{\text{cutoff}} to get Φλcutoff=hc\Phi\lambda_{\text{cutoff}} = hc, and divide by Φ\Phi to isolate λcutoff=hcΦ\lambda_{\text{cutoff}} = \frac{hc}{\Phi}.

Dimensional and Scale Sanity Check
  • Visible light has wavelengths in the range of hundreds of nanometers (400–700 nm400\text{--}700\text{ nm}), while photon energies are on the order of a few electron-volts.

  • Always verify that the resulting threshold wavelength is comparable to the wavelengths in the rest of the problem rather than an extremely tiny fraction of a nanometer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the relationship between work function and cutoff wavelength: Φ=hcλcutoff\Phi = \frac{hc}{\lambda_{\text{cutoff}}}.

  2. Multiply both sides by λcutoff\lambda_{\text{cutoff}}: Φ⋅λcutoff=hc\Phi\cdot\lambda_{\text{cutoff}} = hc.

  3. Divide by Φ\Phi: λcutoff=hcΦ\lambda_{\text{cutoff}} = \frac{hc}{\Phi}.

  4. Substitute the given numbers: λcutoff=1239.8 eV⋅nm2.75 eV≈450.84 nm\lambda_{\text{cutoff}} = \frac{1239.8\text{ eV}\cdot\text{nm}}{2.75\text{ eV}} \approx 450.84\text{ nm}.

Final answer

(a) λcutoff=451 nm\lambda_{\text{cutoff}} = 451\text{ nm}; (b) No emission occurs (Kmax⁡=0 eVK_{\max} = 0\text{ eV}); (c) Kmax⁡=0.20 eVK_{\max} = 0.20\text{ eV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice rearranging inverse formulas such as E=hcλE = \frac{hc}{\lambda} to solve for λ\lambda step by step.

  • Perform unit checks on formulas before calculating: eV⋅nmeV=nm\frac{\text{eV}\cdot\text{nm}}{\text{eV}} = \text{nm}, whereas eVeV⋅nm=nm−1\frac{\text{eV}}{\text{eV}\cdot\text{nm}} = \text{nm}^{-1}.

Lock it in

Similar question

01

A metal has a work function of Φ=3.10 eV\Phi = 3.10\text{ eV}. Light of wavelength λ=450 nm\lambda = 450\text{ nm} illuminates the surface. State whether photoelectrons are emitted, and find Kmax⁡K_{\max} in eV\text{eV}. Use hc=1239.8 eV⋅nmhc = 1239.8\text{ eV}\cdot\text{nm}.

Answer

Photon energy: E=1239.8450≈2.76 eVE = \frac{1239.8}{450} \approx 2.76\text{ eV}. Since E=2.76 eV<Φ=3.10 eVE = 2.76\text{ eV} < \Phi = 3.10\text{ eV}, no photoelectrons are ejected, and Kmax⁡=0 eVK_{\max} = 0\text{ eV}.

02

Cesium has a work function of Φ=2.14 eV\Phi = 2.14\text{ eV}. If light of frequency f=6.00×1014 Hzf = 6.00 \times 10^{14}\text{ Hz} strikes the surface, determine whether photoelectrons are emitted and calculate their maximum kinetic energy Kmax⁡K_{\max} in eV\text{eV}. Use h=4.136×10−15 eV⋅sh = 4.136 \times 10^{-15}\text{ eV}\cdot\text{s}.

Answer

Photon energy: E=hf=(4.136×10−15)(6.00×1014)≈2.48 eVE = hf = (4.136 \times 10^{-15})(6.00 \times 10^{14}) \approx 2.48\text{ eV}. Since E>ΦE > \Phi, photoelectrons are emitted. Maximum kinetic energy: Kmax⁡=E−Φ=2.48 eV−2.14 eV=0.34 eVK_{\max} = E - \Phi = 2.48\text{ eV} - 2.14\text{ eV} = 0.34\text{ eV}.

03

Monochromatic light of wavelength λ=310 nm\lambda = 310\text{ nm} ejects electrons from a surface with a stopping potential of V0=1.25 VV_0 = 1.25\text{ V}. (a) Find the work function Φ\Phi in eV\text{eV}. (b) If the wavelength is changed to 500 nm500\text{ nm}, find the new stopping potential. Use hc=1239.8 eV⋅nmhc = 1239.8\text{ eV}\cdot\text{nm}.

Answer

(a) E1=1239.8310=4.00 eVE_1 = \frac{1239.8}{310} = 4.00\text{ eV}. Since Kmax⁡=eV0=1.25 eVK_{\max} = eV_0 = 1.25\text{ eV}, Φ=E1−Kmax⁡=4.00−1.25=2.75 eV\Phi = E_1 - K_{\max} = 4.00 - 1.25 = 2.75\text{ eV}. (b) For λ2=500 nm\lambda_2 = 500\text{ nm}, E2=1239.8500=2.48 eV<ΦE_2 = \frac{1239.8}{500} = 2.48\text{ eV} < \Phi, so no electrons are ejected and the stopping potential is V0=0 VV_0 = 0\text{ V}.

Loading workspace…