Resources
A reconnaissance satellite is placed into a highly eccentric orbit around Earth. The satellite has a perigee altitude of above the Earth's surface (where Earth's radius is ). What is the critical threshold value for the orbital eccentricity such that the satellite's apogee distance does not exceed the Moon's orbital distance of ? Express your answer to three significant figures.
Answer and steps
Final answer
Steps
Identify Orbital Distances from Earth's Center
In Keplerian orbital mechanics, orbital distances such as perigee and apogee are measured from the center of the primary body (Earth's center of mass), not from the surface.
- Perigee distance ():
- Maximum apogee distance ():
Common Pitfall: Forgetting to add Earth's radius to the altitude will underestimate the perigee distance and yield an incorrect eccentricity.
Relate Orbital Distances to Eccentricity
For an elliptical orbit with semi-major axis and eccentricity :
- Perigee distance:
- Apogee distance:
Taking the ratio of the difference and the sum of these two distances eliminates the semi-major axis :
Dividing the two expressions gives the formula for eccentricity directly in terms of periapsis and apoapsis distances:
Calculate the Critical Eccentricity
Substitute the numerical values of and :
Rounding to three significant figures:
Typical errors
01 The student uses the perigee altitude above the surface instead of the perigee distance from the center of the Earth.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
,
Correct,
You set the perigee radius directly equal to the altitude above the surface () rather than measuring from the center of Earth by adding Earth's radius .
- Step 2
- Step 3Correct
Your arithmetic and rounding were carried out accurately, but the result was skewed because did not include Earth's radius.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled the relationship between orbital eccentricity and apsis distances: .
You converted scientific notation into standard form accurately.
You completed the numerical substitution and rounded your final value cleanly to three significant figures.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn orbital mechanics, all radial orbital parameters (, , and ) are measured from the center of mass of the central gravitational body, not from its surface. When a problem provides an altitude , you must always add the body's radius to obtain the true orbital distance ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Apsis Distance Definition
In two-body Keplerian mechanics, orbital radii are measured from the center of the primary focus: .
Always draw or annotate orbital radii starting from the primary body's center before plugging values into orbital equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the true perigee radius and apogee radius into .
Calculate the numerator: .
Calculate the denominator: .
Divide and round to three significant figures: .
02 The student inverts the eccentricity ratio formula, writing e = (r_a - r_p) / (2a) as (r_a - r_p) / r_a or confusing it with (r_p - r_a) / (r_p + r_a) yielding an inverted formula e = (r_a - r_p) / (2 * r_a).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In an elliptical orbit, the semi-major axis is , so the distance between the center and focus is . Therefore, the eccentricity is , not .
- Step 3Correct
Your arithmetic follows from your substituted values, but the final result is incorrect due to the denominator formula error in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that orbital mechanics distances must be measured from Earth's center, adding Earth's radius to the perigee altitude.
You accurately identified the perigee and apogee distances in consistent units.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou divided the distance difference by apogee distance instead of the full major axis , forgetting that eccentricity is the ratio of focal distance to semi-major axis .
REASONING PATH
Your ACEpath teacher’s suggested approach- Apoapsis and Periapsis Sum
Always verify that the denominator of the eccentricity ratio represents the full major axis length .
- Eccentricity Ratio Derivation
Derive eccentricity by dividing the difference by the sum to eliminate the semi-major axis .
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the correct eccentricity formula relating apsidal distances: .
Substitute and : .
Evaluate the quotient and round to three significant figures: .
03 The student subtracts Earth's radius from the Moon's distance under the mistaken assumption that the Moon's distance is given as an altitude above Earth's surface.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You subtracted Earth's radius from the Moon's orbital distance. The problem specifies the Moon's orbital distance as , which is already measured from the center of Earth, so Earth's radius should not be subtracted.
- Step 3
- Step 4Correct
Your calculation followed your formula correctly, but the numerical answer was affected by using instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that perigee altitude must be converted to an orbital distance from Earth's center by adding .
You used the exact mathematical relationship connecting orbital eccentricity to periapsis and apoapsis radii.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the Moon's given orbital distance as an altitude above Earth's surface rather than as a radial distance from Earth's center of mass.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check terminology: distance vs. altitude
An 'altitude' () is measured from the planetary surface, whereas an 'orbital distance' or 'radius' () is measured directly from the primary body's center of mass.
Always verify whether a given parameter represents (requiring ) or (already including ). Do not subtract radius unless converting from orbital distance to altitude.
CORRECTED PATH
ACEpath Teacher's DemonstrationLock it in
In Keplerian orbital mechanics, where is an orbital radius (such as perigee or apogee) measured from?
It is measured from the center of mass of the central body, not from its surface ().
Similar question
A satellite orbits Mars (radius ) with a periapsis altitude of and an apoapsis altitude of . What is the orbital eccentricity ? Express your answer to three significant figures.
Answer
- Find distances from Mars's center: , .
- Compute eccentricity: .
An Earth observation satellite is placed in an elliptical orbit with eccentricity and a perigee altitude of above Earth (). Find its apogee altitude above Earth's surface in kilometers.
Answer
- Calculate perigee distance from center: .
- Use : .
- Subtract Earth's radius for altitude: ().
A probe orbits a spherical asteroid of radius . At periapsis, its distance from the asteroid's surface is . At apoapsis, its distance from the center of the asteroid is . If mission controllers fire thrusters at apoapsis to change the orbit to circular at that same apoapsis distance, what was the initial orbital eccentricity and what is the new orbital eccentricity?
Answer
- Initial periapsis distance from center: .
- Initial apoapsis distance from center: .
- Initial eccentricity: .
- For a circular orbit, , so .