Resources

A coin of mass m=5.00 gm = 5.00\text{ g} rests on a horizontal turntable at a radial distance of r=0.180 mr = 0.180\text{ m} from the central vertical spindle. The static coefficient of friction between the coin and the turntable surface is μs=0.450\mu_s = 0.450. Taking the acceleration due to gravity as g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the minimum rotational period TminT_{\text{min}} the turntable can have before the coin begins to slip outward.

Answer and steps

Final answer

Tmin=1.27 sT_{\text{min}} = 1.27\text{ s}

Steps

01

Identify the Forces Acting on the Coin

In the vertical direction, the coin is in static equilibrium:

  • The downward gravitational force is Fg=mgF_g = mg.
  • The upward normal force exerted by the turntable is NN.

Since there is no vertical acceleration: N=mgN = mg

In the horizontal direction, as the turntable rotates, the coin undergoes uniform circular motion of radius rr. The inward centripetal acceleration is provided entirely by the force of static friction fsf_s: fs=mac=mω2rf_s = m a_c = m \omega^2 r where ω\omega is the angular velocity of the turntable.


02

Condition to Prevent Slipping

The static friction force cannot exceed its maximum possible value: fs≤fs,max=μsN=μsmgf_s \le f_{s,\text{max}} = \mu_s N = \mu_s mg

Setting the required centripetal force less than or equal to the maximum static friction gives: mω2r≤μsmgm \omega^2 r \le \mu_s mg

Notice that the mass mm cancels from both sides, showing that the slipping threshold is independent of the coin's mass: ω2r≤μsg  ⟹  ω≤μsgr\omega^2 r \le \mu_s g \implies \omega \le \sqrt{\frac{\mu_s g}{r}}


03

Relate Angular Speed to Rotational Period

The relationship between angular speed ω\omega and the rotational period TT is: ω=2πT\omega = \frac{2\pi}{T}

Substituting this expression into the inequality: 2πT≤μsgr\frac{2\pi}{T} \le \sqrt{\frac{\mu_s g}{r}}

Because period TT is in the denominator, the maximum allowable angular speed ωmax\omega_{\text{max}} corresponds to the minimum period of rotation TminT_{\text{min}}: T≥2πrμsgT \ge 2\pi \sqrt{\frac{r}{\mu_s g}}

Tmin=2πrμsgT_{\text{min}} = 2\pi \sqrt{\frac{r}{\mu_s g}}

Common Pitfall: A faster turntable speed means a higher angular velocity ω\omega, but a shorter period TT. Do not confuse the maximum frequency or angular speed with a maximum period.


04

Calculate the Numerical Value

Substitute the given values into the formula:

  • r=0.180 mr = 0.180\text{ m}
  • μs=0.450\mu_s = 0.450
  • g=9.80 m/s2g = 9.80\text{ m/s}^2

Tmin=2π0.180 m0.450⋅9.80 m/s2=2π0.1804.410=2π249 sT_{\text{min}} = 2\pi \sqrt{\frac{0.180\text{ m}}{0.450 \cdot 9.80\text{ m/s}^2}} = 2\pi \sqrt{\frac{0.180}{4.410}} = 2\pi \sqrt{\frac{2}{49}}\text{ s}

Tmin=2π⋅27 s≈2π⋅0.2020 s≈1.27 sT_{\text{min}} = 2\pi \cdot \frac{\sqrt{2}}{7}\text{ s} \approx 2\pi \cdot 0.2020\text{ s} \approx 1.27\text{ s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the inverse relationship between period and angular velocity or circular speed, setting T = 2π * r / v instead of using the correct radical expression, or inverting the fraction inside the square root to get T = 2π * √(μ_s * g / r) ≈ 31.1 s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    fmax⁡=μs⋅m⋅g  ⟹  m⋅ω2⋅r=μs⋅m⋅g  ⟹  ω=μs⋅grf_{\max} = \mu_s \cdot m \cdot g \implies m \cdot \omega^2 \cdot r = \mu_s \cdot m \cdot g \implies \omega = \sqrt{\frac{\mu_s \cdot g}{r}}

  2. Step 2

    T=2π∗ωT = 2\pi * \omega

    Correct

    T=2πωT = \frac{2\pi}{\omega}

    The rotational period is the time taken for one full revolution (2π radians2\pi\text{ radians}), so T=2πωT = \frac{2\pi}{\omega}, not 2πω2\pi \omega.

  3. Step 3

    T=2π∗0.450∗9.800.180=2π∗24.5  ⟹  T=2π∗4.95=31.1 sT = 2\pi * \sqrt{\frac{0.450 * 9.80}{0.180}} = 2\pi * \sqrt{24.5} \implies T = 2\pi * 4.95 = 31.1\text{ s}

    Correct

    Tmin⁡=2πω=2πrμsg=2π0.1800.450⋅9.80≈1.27 sT_{\min} = \frac{2\pi}{\omega} = 2\pi \sqrt{\frac{r}{\mu_s g}} = 2\pi \sqrt{\frac{0.180}{0.450 \cdot 9.80}} \approx 1.27\text{ s}

    Your arithmetic followed your incorrect formula from Step 2, carrying the error through to the final answer.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that static friction provides the necessary centripetal force for circular motion.

You correctly canceled the mass of the coin and solved for the critical angular velocity ω\omega.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse relationship confusion between period and angular velocity

Inverting the relationship between period and angular velocity by multiplying by ω\omega rather than dividing by it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating angular frequency with linear frequency or misremembering the definition ω=2πT\omega = \frac{2\pi}{T} as T=2πωT = 2\pi\omega, which leads to dimensional inconsistency (seconds versus rad2/s\text{rad}^2/\text{s}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional analysis of rotational variables
  • ω\omega has units of rad/s\text{rad/s} (or s−1\text{s}^{-1}), while TT has units of seconds (s\text{s}).

  • Always verify that T=2πωT = \frac{2\pi}{\omega} yields seconds: 1s−1=s\frac{1}{\text{s}^{-1}} = \text{s}.

Physical sense check
  • Rotating faster means larger ω\omega, which must correspond to a shorter period TT.

  • Check whether increasing rotational speed decreases the period; T=2πωT = 2\pi\omega incorrectly suggests that spinning faster increases the time per lap.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start with the definition relating period and angular velocity: ω=2πT  ⟹  T=2πω\omega = \frac{2\pi}{T} \implies T = \frac{2\pi}{\omega}.

  2. Substitute ω=μsgr\omega = \sqrt{\frac{\mu_s g}{r}} into the period formula: Tmin⁡=2πrμsgT_{\min} = 2\pi \sqrt{\frac{r}{\mu_s g}}.

  3. Insert the numerical values: Tmin⁡=2π0.1800.450⋅9.80=2π0.1804.410=2π249T_{\min} = 2\pi \sqrt{\frac{0.180}{0.450 \cdot 9.80}} = 2\pi \sqrt{\frac{0.180}{4.410}} = 2\pi \sqrt{\frac{2}{49}}.

  4. Evaluate: Tmin⁡=2π⋅27≈1.27 sT_{\min} = 2\pi \cdot \frac{\sqrt{2}}{7} \approx 1.27\text{ s}.

Final answer

Tmin⁡=1.27 sT_{\min} = 1.27\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental definitions relating ω\omega, frequency ff, and period TT: ω=2πf=2πT\omega = 2\pi f = \frac{2\pi}{T}.

  • Practice dimensional analysis on rotational formulas before substituting numbers to catch unit inversions immediately.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to take the square root when solving for angular speed from the centripetal acceleration formula, using ω = μ_s * g / r instead of ω².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m⋅ac=μs⋅m⋅gm \cdot a_c = \mu_s \cdot m \cdot g

  2. Step 2

    ac=ω⋅ra_c = \omega \cdot r

    Correct

    ac=ω2ra_c = \omega^2 r

    Centripetal acceleration depends quadratically on angular velocity (ac=ω2ra_c = \omega^2 r). The expression ωr\omega r gives tangential speed vv, not acceleration.

  3. Step 3

    ω⋅r=μs⋅g  ⟹  ω=μs⋅gr=0.450⋅9.800.180=24.5 rad/s\omega \cdot r = \mu_s \cdot g \implies \omega = \frac{\mu_s \cdot g}{r} = \frac{0.450 \cdot 9.80}{0.180} = 24.5\text{ rad/s}

    Correct

    ω2r=μsg  ⟹  ω=μsgr=0.450⋅9.800.180=4.95 rad/s\omega^2 r = \mu_s g \implies \omega = \sqrt{\frac{\mu_s g}{r}} = \sqrt{\frac{0.450 \cdot 9.80}{0.180}} = 4.95\text{ rad/s}

    Because of the missing exponent on ω\omega, you solved ω=μsgr\omega = \frac{\mu_s g}{r} instead of taking the square root of μsgr\frac{\mu_s g}{r}.

  4. Step 4

    Tmin=2πω=2π24.5=0.256 sT_{\text{min}} = \frac{2\pi}{\omega} = \frac{2\pi}{24.5} = 0.256\text{ s}

    Correct

    Tmin=2πω=2πrμsg≈1.27 sT_{\text{min}} = \frac{2\pi}{\omega} = 2\pi \sqrt{\frac{r}{\mu_s g}} \approx 1.27\text{ s}

    You correctly related period to angular velocity via T=2πωT = \frac{2\pi}{\omega}, but evaluating it with the incorrect ω\omega gave an undersized period.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that static friction provides the necessary centripetal force to keep the coin from slipping.

You correctly cancelled the mass of the coin from both sides of the force equation.

You used the correct relationship between rotational period and angular velocity, T=2πωT = \frac{2\pi}{\omega}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Centripetal acceleration formula error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused linear speed v=ωrv = \omega r with centripetal acceleration ac=ω2ra_c = \omega^2 r, omitting the power of 2 on the angular speed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Centripetal Acceleration Forms
  • Centripetal acceleration is ac=v2r=ω2ra_c = \frac{v^2}{r} = \omega^2 r.

  • Always verify units before solving: ω\omega is in rad/s\text{rad/s}, so ω2r\omega^2 r has units of (s−2)(m)=m/s2(\text{s}^{-2})(\text{m}) = \text{m/s}^2.

Period vs. Frequency Relation
  • A larger angular speed corresponds to a smaller period: T=2πωT = \frac{2\pi}{\omega}.

  • Ensure maximum angular speed ωmax\omega_{\text{max}} maps directly to the minimum allowable period TminT_{\text{min}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the correct centripetal acceleration formula into the radial equation: m(ω2r)=μsmgm(\omega^2 r) = \mu_s m g.

  2. Cancel mass mm and solve for ω\omega: ω=μsgr=0.450⋅9.800.180=24.5≈4.9497 rad/s\omega = \sqrt{\frac{\mu_s g}{r}} = \sqrt{\frac{0.450 \cdot 9.80}{0.180}} = \sqrt{24.5} \approx 4.9497\text{ rad/s}.

  3. Calculate the minimum rotational period: Tmin=2πω=2π4.9497 rad/s≈1.27 sT_{\text{min}} = \frac{2\pi}{\omega} = \frac{2\pi}{4.9497\text{ rad/s}} \approx 1.27\text{ s}.

Final answer

Tmin=1.27 sT_{\text{min}} = 1.27\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationships connecting linear velocity, angular velocity, and centripetal acceleration (v=ωrv = \omega r, ac=v2/r=ω2ra_c = v^2/r = \omega^2 r).

  • Perform dimensional analysis on your algebraic steps to catch missing powers before plugging in numbers.

  • Practice solving rotational equilibrium problems involving static friction without skipping algebraic steps.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly multiplies the mass by the acceleration term instead of recognizing that mass cancels out, and inadvertently uses mass in grams without converting to kilograms when calculating centripetal force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    fs=μs∗m∗g=0.450∗5.00∗9.80=22.05 Nf_s = \mu_s * m * g = 0.450 * 5.00 * 9.80 = 22.05\text{ N}

    Correct

    fs,max=μsmg=0.450⋅(0.00500 kg)⋅9.80 m/s2=0.02205 Nf_{s,\text{max}} = \mu_s m g = 0.450 \cdot (0.00500\text{ kg}) \cdot 9.80\text{ m/s}^2 = 0.02205\text{ N}

    You substituted the mass as 5.00 g5.00\text{ g} directly into the force equation without converting to standard SI units (kilograms), which gave a friction force of 22.05 N22.05\text{ N} instead of 0.02205 N0.02205\text{ N}.

  2. Step 2

    m∗v2r=22.05  ⟹  5.00∗v20.180=22.05  ⟹  v2=22.05∗0.1805.00=0.7938  ⟹  v=0.891 m/s\frac{m * v^2}{r} = 22.05 \implies \frac{5.00 * v^2}{0.180} = 22.05 \implies v^2 = \frac{22.05 * 0.180}{5.00} = 0.7938 \implies v = 0.891\text{ m/s}

    Correct

    mv2r=μsmg  ⟹  v=μsgr=0.450⋅9.80 m/s2⋅0.180 m≈0.891 m/s\frac{m v^2}{r} = \mu_s m g \implies v = \sqrt{\mu_s g r} = \sqrt{0.450 \cdot 9.80\text{ m/s}^2 \cdot 0.180\text{ m}} \approx 0.891\text{ m/s}

    You correctly equated centripetal force to friction and solved for linear velocity. Because you used 5.005.00 on both sides of the equation, the missing factor of 10−310^{-3} canceled out, yielding the correct speed v=0.891 m/sv = 0.891\text{ m/s} despite the incorrect intermediate force.

  3. Step 3

    Tmin=2π∗rv=2π∗0.1800.891=1.27 sT_{\text{min}} = \frac{2\pi * r}{v} = \frac{2\pi * 0.180}{0.891} = 1.27\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that static friction provides the necessary centripetal acceleration.

You correctly related linear tangential speed to orbital radius and rotational period.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inconsistent Units / Premature Numerical Evaluation

You wrote the mass as 5.005.00 instead of 0.00500 kg0.00500\text{ kg} when calculating force in Newtons.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You evaluated numerical values step-by-step instead of simplifying the equations symbolically first. Working symbolically reveals that the mass mm cancels on both sides (mv2r=μsmg  ⟹  v=μsgr\frac{m v^2}{r} = \mu_s m g \implies v = \sqrt{\mu_s g r}), eliminating both the risk of unit errors and unnecessary intermediate calculations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Solve Symbolically Before Substituting
  • Always cancel common variables (like mass) in algebraic expressions before plugging in numerical values.

  • Equate mv2r=μsmg\frac{m v^2}{r} = \mu_s m g, divide through by mm, and isolate v=μsgrv = \sqrt{\mu_s g r}.

Verify Standard SI Units
  • Forces in Newtons require mass in kilograms (kg\text{kg}), length in meters (m\text{m}), and time in seconds (s\text{s}).

  • If you compute forces explicitly, convert 5.00 g5.00\text{ g} to 5.00×10−3 kg5.00 \times 10^{-3}\text{ kg} so that fs=0.0221 Nf_s = 0.0221\text{ N}, not 22.05 N22.05\text{ N}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Equate the maximum static friction to the required centripetal force: mv2r=μsmg\frac{m v^2}{r} = \mu_s m g

  2. Cancel the mass mm from both sides: v2r=μsg  ⟹  v=μsgr\frac{v^2}{r} = \mu_s g \implies v = \sqrt{\mu_s g r}

  3. Substitute v=2πrTv = \frac{2\pi r}{T} to directly obtain Tmin=2πrμsgT_{\text{min}} = 2\pi \sqrt{\frac{r}{\mu_s g}}

  4. Evaluate: Tmin=2π0.1800.450⋅9.80=2π249≈1.27 sT_{\text{min}} = 2\pi \sqrt{\frac{0.180}{0.450 \cdot 9.80}} = 2\pi \sqrt{\frac{2}{49}} \approx 1.27\text{ s}

Final answer

Tmin=1.27 sT_{\text{min}} = 1.27\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice simplifying circular motion equations algebraically to spot cancellations before plugging in numbers.

  • Always check whether intermediate calculated forces match physical intuition (a tiny coin cannot produce 22 N22\text{ N} of friction).

Lock it in

Similar question

01

A small block rests on a rotating horizontal platform at a distance of r=0.25 mr = 0.25\text{ m} from the axis. The coefficient of static friction is μs=0.40\mu_s = 0.40. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, find the maximum angular speed ωmax⁡\omega_{\max} and the minimum period Tmin⁡T_{\min} before the block slips.

Answer

Setting mω2r=μsmgm\omega^2 r = \mu_s mg yields ωmax⁡=μsgr=0.40⋅9.80.25=15.68≈3.96 rad/s\omega_{\max} = \sqrt{\frac{\mu_s g}{r}} = \sqrt{\frac{0.40 \cdot 9.8}{0.25}} = \sqrt{15.68} \approx 3.96\text{ rad/s}. Then, Tmin⁡=2πωmax⁡=2π3.96≈1.59 sT_{\min} = \frac{2\pi}{\omega_{\max}} = \frac{2\pi}{3.96} \approx 1.59\text{ s}.

02

A test centrifuge rotates with a constant frequency of f=5.0 Hzf = 5.0\text{ Hz}. What is its rotational period TT, and what is its angular velocity ω\omega?

Answer

T=1f=15.0 Hz=0.20 sT = \frac{1}{f} = \frac{1}{5.0\text{ Hz}} = 0.20\text{ s}. The angular velocity is ω=2πf=2π(5.0)=10π≈31.4 rad/s\omega = 2\pi f = 2\pi(5.0) = 10\pi \approx 31.4\text{ rad/s}.

03

A car drives around a flat, unbanked circular curve of radius R=80.0 mR = 80.0\text{ m} with friction coefficient μs=0.800\mu_s = 0.800. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the minimum time Tmin⁡T_{\min} the car would take to complete one full lap without skidding.

Answer

The maximum speed without skidding is vmax⁡=μsgR=0.800⋅9.80⋅80.0=25.04 m/sv_{\max} = \sqrt{\mu_s g R} = \sqrt{0.800 \cdot 9.80 \cdot 80.0} = 25.04\text{ m/s}. The minimum lap time is the period: Tmin⁡=2πRvmax⁡=2π(80.0)25.04≈20.1 sT_{\min} = \frac{2\pi R}{v_{\max}} = \frac{2\pi(80.0)}{25.04} \approx 20.1\text{ s} (or equivalently via Tmin⁡=2πωmax⁡=2πRμsg≈20.1 sT_{\min} = \frac{2\pi}{\omega_{\max}} = 2\pi \sqrt{\frac{R}{\mu_s g}} \approx 20.1\text{ s}).

Loading workspace…