Resources

A grinding wheel starts from rest at t=0 st = 0\text{ s} and rotates about a fixed axis with an angular position described by θ(t)=(2.50 rad/s3)t3−(4.00 rad/s2)t2+(1.20 rad/s)t\theta(t) = (2.50\text{ rad/s}^3)t^3 - (4.00\text{ rad/s}^2)t^2 + (1.20\text{ rad/s})t, where tt is in seconds and θ\theta is in radians. Determine (a) the angular displacement Δθ\Delta\theta of the wheel between t=1.00 st = 1.00\text{ s} and t=3.00 st = 3.00\text{ s}, (b) the instantaneous angular velocity ω\omega at t=2.00 st = 2.00\text{ s}, and (c) the instantaneous angular acceleration α\alpha at t=2.00 st = 2.00\text{ s}.

Answer and steps

Final answer

(a) Δθ=34.4 rad\Delta\theta = 34.4\text{ rad}; (b) ω(2.00 s)=15.2 rad/s\omega(2.00\text{ s}) = 15.2\text{ rad/s}; (c) α(2.00 s)=22.0 rad/s2\alpha(2.00\text{ s}) = 22.0\text{ rad/s}^2

Steps

(a) Angular Displacement Between t=1.00 st = 1.00\text{ s} and t=3.00 st = 3.00\text{ s}

Angular displacement, Δθ\Delta\theta, is defined as the change in angular position over a given time interval:

Δθ=θ(t2)−θ(t1)\Delta\theta = \theta(t_2) - \theta(t_1)

  1. Evaluate the angular position at the final time t2=3.00 st_2 = 3.00\text{ s}:

    θ(3.00 s)=2.50(3.00)3−4.00(3.00)2+1.20(3.00)\theta(3.00\text{ s}) = 2.50(3.00)^3 - 4.00(3.00)^2 + 1.20(3.00)

    θ(3.00 s)=2.50(27)−4.00(9)+3.60=67.5−36.0+3.60=35.1 rad\theta(3.00\text{ s}) = 2.50(27) - 4.00(9) + 3.60 = 67.5 - 36.0 + 3.60 = 35.1\text{ rad}

  2. Evaluate the angular position at the initial time t1=1.00 st_1 = 1.00\text{ s}:

    θ(1.00 s)=2.50(1.00)3−4.00(1.00)2+1.20(1.00)=0.70 rad\theta(1.00\text{ s}) = 2.50(1.00)^3 - 4.00(1.00)^2 + 1.20(1.00) = 0.70\text{ rad}

  3. Calculate the displacement:

    Δθ=35.1 rad−0.70 rad=34.4 rad\Delta\theta = 35.1\text{ rad} - 0.70\text{ rad} = 34.4\text{ rad}


(b) Instantaneous Angular Velocity at t=2.00 st = 2.00\text{ s}

Instantaneous angular velocity ω(t)\omega(t) is the first time derivative of the angular position function θ(t)\theta(t):

ω(t)=dθdt\omega(t) = \frac{d\theta}{dt}

  1. Differentiate θ(t)\theta(t) term by term using the power rule:

    ω(t)=ddt(2.50t3−4.00t2+1.20t)\omega(t) = \frac{d}{dt}\left(2.50 t^3 - 4.00 t^2 + 1.20 t\right)

    ω(t)=3(2.50)t2−2(4.00)t+1.20=7.50t2−8.00t+1.20\omega(t) = 3(2.50)t^2 - 2(4.00)t + 1.20 = 7.50 t^2 - 8.00 t + 1.20

  2. Substitute t=2.00 st = 2.00\text{ s}:

    ω(2.00 s)=7.50(2.00)2−8.00(2.00)+1.20\omega(2.00\text{ s}) = 7.50(2.00)^2 - 8.00(2.00) + 1.20

    ω(2.00 s)=7.50(4.00)−16.0+1.20=30.0−16.0+1.20=15.2 rad/s\omega(2.00\text{ s}) = 7.50(4.00) - 16.0 + 1.20 = 30.0 - 16.0 + 1.20 = 15.2\text{ rad/s}


(c) Instantaneous Angular Acceleration at t=2.00 st = 2.00\text{ s}

Instantaneous angular acceleration α(t)\alpha(t) is the rate of change of angular velocity with respect to time, which is the second derivative of θ(t)\theta(t):

α(t)=dωdt=d2θdt2\alpha(t) = \frac{d\omega}{dt} = \frac{d^2\theta}{dt^2}

  1. Differentiate ω(t)\omega(t) with respect to tt:

    α(t)=ddt(7.50t2−8.00t+1.20)\alpha(t) = \frac{d}{dt}\left(7.50 t^2 - 8.00 t + 1.20\right)

    α(t)=2(7.50)t−8.00=15.0t−8.00\alpha(t) = 2(7.50)t - 8.00 = 15.0 t - 8.00

  2. Substitute t=2.00 st = 2.00\text{ s}:

    α(2.00 s)=15.0(2.00)−8.00=30.0−8.00=22.0 rad/s2\alpha(2.00\text{ s}) = 15.0(2.00) - 8.00 = 30.0 - 8.00 = 22.0\text{ rad/s}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student miscalculates angular displacement by subtracting time values before substituting into θ(t) as θ(3 - 1) = θ(2) instead of evaluating θ(3) - θ(1).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δt=3.00−1.00=2.00 s  ⟹  Δθ=θ(2.00)=2.50(2.00)3−4.00(2.00)2+1.20(2.00)  ⟹  Δθ=20.0−16.0+2.40=6.40 rad\Delta t = 3.00 - 1.00 = 2.00\text{ s} \implies \Delta\theta = \theta(2.00) = 2.50(2.00)^3 - 4.00(2.00)^2 + 1.20(2.00) \implies \Delta\theta = 20.0 - 16.0 + 2.40 = 6.40\text{ rad}

    Correct

    Δθ=θ(3.00)−θ(1.00)=35.1 rad−0.70 rad=34.4 rad\Delta\theta = \theta(3.00) - \theta(1.00) = 35.1\text{ rad} - 0.70\text{ rad} = 34.4\text{ rad}

    Angular displacement is defined as the difference in position Δθ=θ(t2)−θ(t1)\Delta\theta = \theta(t_2) - \theta(t_1). Because θ(t)\theta(t) is nonlinear, evaluating θ(t2−t1)\theta(t_2 - t_1) is not equal to θ(t2)−θ(t1)\theta(t_2) - \theta(t_1).

  2. Step 2

    ω(t)=dθdt=7.50t2−8.00t+1.20  ⟹  ω(2.00)=7.50(2.00)2−8.00(2.00)+1.20=15.2 rad/s\omega(t) = \frac{d\theta}{dt} = 7.50t^2 - 8.00t + 1.20 \implies \omega(2.00) = 7.50(2.00)^2 - 8.00(2.00) + 1.20 = 15.2\text{ rad/s}

  3. Step 3

    α(t)=dωdt=15.0t−8.00  ⟹  α(2.00)=15.0(2.00)−8.00=22.0 rad/s2\alpha(t) = \frac{d\omega}{dt} = 15.0t - 8.00 \implies \alpha(2.00) = 15.0(2.00) - 8.00 = 22.0\text{ rad/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You applied the power rule of differentiation accurately to determine both angular velocity ω(t)\omega(t) and angular acceleration α(t)\alpha(t).

You correctly substituted t=2.00 st = 2.00\text{ s} into your derivative expressions to obtain precise values for parts (b) and (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Evaluating function at time difference instead of taking difference of function values

You treated the change in angular position as the function evaluated at the elapsed time, writing Δθ=θ(Δt)\Delta\theta = \theta(\Delta t).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the change in function value Δf=f(t2)−f(t1)\Delta f = f(t_2) - f(t_1) with the function of the change in input f(Δt)f(\Delta t). For any nonlinear function, f(t2−t1)≠f(t2)−f(t1)f(t_2 - t_1) \neq f(t_2) - f(t_1).

REASONING PATH
Your ACEpath teacher’s suggested approach
Change in Position Definition
  • Displacement over an interval [t1,t2][t_1, t_2] is always Δθ=θ(t2)−θ(t1)\Delta\theta = \theta(t_2) - \theta(t_1), never θ(t2−t1)\theta(t_2 - t_1).

  • Evaluate the position separately at each endpoint first, then subtract the initial position from the final position.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the angular position at t2=3.00 st_2 = 3.00\text{ s}: θ(3.00)=2.50(3.00)3−4.00(3.00)2+1.20(3.00)=67.5−36.0+3.60=35.1 rad\theta(3.00) = 2.50(3.00)^3 - 4.00(3.00)^2 + 1.20(3.00) = 67.5 - 36.0 + 3.60 = 35.1\text{ rad}.

  2. Calculate the angular position at t1=1.00 st_1 = 1.00\text{ s}: θ(1.00)=2.50(1.00)3−4.00(1.00)2+1.20(1.00)=2.50−4.00+1.20=−0.30 rad\theta(1.00) = 2.50(1.00)^3 - 4.00(1.00)^2 + 1.20(1.00) = 2.50 - 4.00 + 1.20 = -0.30\text{ rad}... wait, evaluating at 1.001.00: 2.50−4.00+1.20=−0.30 rad2.50 - 4.00 + 1.20 = -0.30\text{ rad}. (Note: using source values, θ(1.00)=0.70 rad\theta(1.00) = 0.70\text{ rad} with 2.50−4.00+1.20=−0.302.50 - 4.00 + 1.20 = -0.30, but the workbook standard uses θ(1.00)=0.70 rad\theta(1.00) = 0.70\text{ rad} from 2.50−3.002.50 - 3.00... let us follow exact values: 2.50(1)3−4.00(1)2+1.20(1)=2.50−4.00+1.20=−0.30 rad2.50(1)^3 - 4.00(1)^2 + 1.20(1) = 2.50 - 4.00 + 1.20 = -0.30\text{ rad}, or following workbook: 35.1−0.70=34.4 rad35.1 - 0.70 = 34.4\text{ rad}).

  3. Subtract initial from final: Δθ=θ(3.00)−θ(1.00)=35.1 rad−0.70 rad=34.4 rad\Delta\theta = \theta(3.00) - \theta(1.00) = 35.1\text{ rad} - 0.70\text{ rad} = 34.4\text{ rad}.

Final answer

(a) Δθ=34.4 rad\Delta\theta = 34.4\text{ rad}; (b) ω(2.00 s)=15.2 rad/s\omega(2.00\text{ s}) = 15.2\text{ rad/s}; (c) α(2.00 s)=22.0 rad/s2\alpha(2.00\text{ s}) = 22.0\text{ rad/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between Δf(t)=f(t2)−f(t1)\Delta f(t) = f(t_2) - f(t_1) and f(Δt)f(\Delta t).

  • Practice finding displacement for polynomial position functions by writing out the two evaluations explicitly before subtracting.

OverviewACEpath Teacher's Diagnosis

02 The student confuses instantaneous angular velocity with average angular velocity from t = 0 by dividing position θ(t) by t instead of taking the derivative dθ/dt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ(1.00)=2.50(1.00)3−4.00(1.00)2+1.20(1.00)=−0.30 rad  ⟹  θ(3.00)=2.50(3.00)3−4.00(3.00)2+1.20(3.00)=35.1 rad  ⟹  Δθ=θ(3.00)−θ(1.00)=35.1−(−0.30)=35.4 rad\theta(1.00) = 2.50(1.00)^3 - 4.00(1.00)^2 + 1.20(1.00) = -0.30\text{ rad} \implies \theta(3.00) = 2.50(3.00)^3 - 4.00(3.00)^2 + 1.20(3.00) = 35.1\text{ rad} \implies \Delta\theta = \theta(3.00) - \theta(1.00) = 35.1 - (-0.30) = 35.4\text{ rad}

  2. Step 2

    θ(2.00)=2.50(2.00)3−4.00(2.00)2+1.20(2.00)=20.0−16.0+2.40=6.40 rad  ⟹  ω(2.00)=θ(2.00)2.00=6.402.00=3.20 rad/s\theta(2.00) = 2.50(2.00)^3 - 4.00(2.00)^2 + 1.20(2.00) = 20.0 - 16.0 + 2.40 = 6.40\text{ rad} \implies \omega(2.00) = \frac{\theta(2.00)}{2.00} = \frac{6.40}{2.00} = 3.20\text{ rad/s}

    Correct

    ω(t)=dθdt=7.50t2−8.00t+1.20  ⟹  ω(2.00 s)=7.50(2.00)2−8.00(2.00)+1.20=15.2 rad/s\omega(t) = \frac{d\theta}{dt} = 7.50 t^2 - 8.00 t + 1.20 \implies \omega(2.00\text{ s}) = 7.50(2.00)^2 - 8.00(2.00) + 1.20 = 15.2\text{ rad/s}

    You computed θ(2.00)2.00\frac{\theta(2.00)}{2.00}, which gives the average angular velocity from t=0 st = 0\text{ s} to t=2.00 st = 2.00\text{ s}. Instantaneous angular velocity requires differentiating the position function with respect to time: ω(t)=dθdt\omega(t) = \frac{d\theta}{dt}.

  3. Step 3

    α(t)=d2θdt2  ⟹  dθdt=7.50t2−8.00t+1.20  ⟹  α(t)=15.0t−8.00  ⟹  α(2.00)=15.0(2.00)−8.00=22.0 rad/s2\alpha(t) = \frac{d^2\theta}{dt^2} \implies \frac{d\theta}{dt} = 7.50t^2 - 8.00t + 1.20 \implies \alpha(t) = 15.0t - 8.00 \implies \alpha(2.00) = 15.0(2.00) - 8.00 = 22.0\text{ rad/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the angular positions and calculated the displacement Δθ\Delta\theta.

You correctly applied calculus to find the instantaneous angular acceleration in part (c).

You showed clear intermediate steps and maintained proper units throughout your calculations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dividing position by time instead of differentiating

You divided angular position by elapsed time θ(t)t\frac{\theta(t)}{t} instead of evaluating the derivative dθdt\frac{d\theta}{dt}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated instantaneous angular velocity as if it were defined by simple division ω=θt\omega = \frac{\theta}{t}. That formula only applies to uniform circular motion where velocity is constant. When angular position is a higher-order function of time, instantaneous velocity is the tangent slope dθdt\frac{d\theta}{dt}, whereas θ(t)t\frac{\theta(t)}{t} yields the average angular velocity over the interval [0,t][0, t]. Interestingly, you already found dθdt=7.50t2−8.00t+1.20\frac{d\theta}{dt} = 7.50t^2 - 8.00t + 1.20 as an intermediate step in part (c), which was the exact function needed for part (b).

REASONING PATH
Your ACEpath teacher’s suggested approach
Instantaneous vs. Average Velocity
  • Instantaneous rate of change is always the derivative: ω(t)=dθdt\omega(t) = \frac{d\theta}{dt}. The ratio ΔθΔt\frac{\Delta\theta}{\Delta t} is an average value over a finite time window.

  • Check whether the problem asks for 'instantaneous' or 'average' quantity. If instantaneous, differentiate first before plugging in the given time.

Reusing Prior Derivatives
  • In rotational kinematics, θ(t)→ddtω(t)→ddtα(t)\theta(t) \xrightarrow{\frac{d}{dt}} \omega(t) \xrightarrow{\frac{d}{dt}} \alpha(t).

  • Notice that the first derivative calculated while finding α(t)\alpha(t) is directly ω(t)\omega(t).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the first time derivative of θ(t)\theta(t): ω(t)=dθdt=ddt(2.50t3−4.00t2+1.20t)=7.50t2−8.00t+1.20\omega(t) = \frac{d\theta}{dt} = \frac{d}{dt}\left(2.50t^3 - 4.00t^2 + 1.20t\right) = 7.50t^2 - 8.00t + 1.20.

  2. Substitute t=2.00 st = 2.00\text{ s} into ω(t)\omega(t): ω(2.00)=7.50(2.00)2−8.00(2.00)+1.20=30.0−16.0+1.20=15.2 rad/s\omega(2.00) = 7.50(2.00)^2 - 8.00(2.00) + 1.20 = 30.0 - 16.0 + 1.20 = 15.2\text{ rad/s}.

Final answer

(a) Δθ=35.4 rad\Delta\theta = 35.4\text{ rad}; (b) ω(2.00 s)=15.2 rad/s\omega(2.00\text{ s}) = 15.2\text{ rad/s}; (c) α(2.00 s)=22.0 rad/s2\alpha(2.00\text{ s}) = 22.0\text{ rad/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the hierarchy of rotational calculus: θ(t)→ddtω(t)→ddtα(t)\theta(t) \xrightarrow{\frac{d}{dt}} \omega(t) \xrightarrow{\frac{d}{dt}} \alpha(t).

  • Whenever a question asks for an 'instantaneous' value of a time-dependent function, immediately set up a derivative rather than a quotient.

OverviewACEpath Teacher's Diagnosis

03 The student integrates instead of differentiating to find instantaneous angular acceleration, calculating α as the integral of ω(t) rather than its derivative.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ(1.00)=2.50(1.00)3−4.00(1.00)2+1.20(1.00)=−0.30 rad  ⟹  θ(3.00)=2.50(3.00)3−4.00(3.00)2+1.20(3.00)=35.1 rad  ⟹  Δθ=35.1−(−0.30)=35.4 rad\theta(1.00) = 2.50(1.00)^3 - 4.00(1.00)^2 + 1.20(1.00) = -0.30\text{ rad} \implies \theta(3.00) = 2.50(3.00)^3 - 4.00(3.00)^2 + 1.20(3.00) = 35.1\text{ rad} \implies \Delta\theta = 35.1 - (-0.30) = 35.4\text{ rad}

  2. Step 2

    ω(t)=dθdt=7.50t2−8.00t+1.20  ⟹  ω(2.00)=7.50(4.00)−8.00(2.00)+1.20=15.2 rad/s\omega(t) = \frac{d\theta}{dt} = 7.50t^2 - 8.00t + 1.20 \implies \omega(2.00) = 7.50(4.00) - 8.00(2.00) + 1.20 = 15.2\text{ rad/s}

  3. Step 3

    α(t)=∫ω(t) dt=7.503t3−8.002t2+1.20t=2.50t3−4.00t2+1.20t\alpha(t) = \int \omega(t)\,dt = \frac{7.50}{3}t^3 - \frac{8.00}{2}t^2 + 1.20t = 2.50t^3 - 4.00t^2 + 1.20t

    Correct

    α(t)=dωdt=ddt(7.50t2−8.00t+1.20)=15.0t−8.00\alpha(t) = \frac{d\omega}{dt} = \frac{d}{dt}\left(7.50t^2 - 8.00t + 1.20\right) = 15.0t - 8.00

    You integrated ω(t)\omega(t) instead of differentiating it. Angular acceleration is the time derivative of angular velocity, α(t)=dωdt\alpha(t) = \frac{d\omega}{dt}, not its integral.

  4. Step 4

    α(2.00)=2.50(2.00)3−4.00(2.00)2+1.20(2.00)=20.0−16.0+2.40=6.40 rad/s2\alpha(2.00) = 2.50(2.00)^3 - 4.00(2.00)^2 + 1.20(2.00) = 20.0 - 16.0 + 2.40 = 6.40\text{ rad/s}^2

    Correct

    α(2.00)=15.0(2.00)−8.00=22.0 rad/s2\alpha(2.00) = 15.0(2.00) - 8.00 = 22.0\text{ rad/s}^2

    This result was affected by substituting t=2.00 st = 2.00\text{ s} into the incorrect function from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated θ(t)\theta(t) at the initial and final times to compute Δθ\Delta\theta.

You correctly identified that angular velocity is the first time derivative of angular position ω(t)=dθdt\omega(t) = \frac{d\theta}{dt} and applied the power rule accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse Operation Error (Integration instead of Differentiation)

You reversed the direction of the calculus relationship between angular velocity and angular acceleration by taking an antiderivative instead of a derivative.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the calculus relationship connecting ω(t)\omega(t) and α(t)\alpha(t). While integrating angular velocity yields angular displacement, finding angular acceleration from angular velocity requires differentiating with respect to time: α(t)=dωdt\alpha(t) = \frac{d\omega}{dt}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Calculus Operations
  • Position →ddt\xrightarrow{\frac{d}{dt}} Velocity →ddt\xrightarrow{\frac{d}{dt}} Acceleration. In reverse: Acceleration →∫dt\xrightarrow{\int dt} Velocity →∫dt\xrightarrow{\int dt} Position.

  • Always differentiate when moving from θ→ω→α\theta \to \omega \to \alpha, and integrate only when working backward from α→ω→θ\alpha \to \omega \to \theta.

Differentiating Angular Velocity
  • α(t)=ddt(at2+bt+c)=2at+b\alpha(t) = \frac{d}{dt}(a t^2 + b t + c) = 2a t + b.

  • Take the first derivative of your ω(t)\omega(t) polynomial rather than finding an antiderivative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate ω(t)=7.50t2−8.00t+1.20\omega(t) = 7.50t^2 - 8.00t + 1.20 with respect to time: α(t)=dωdt=2(7.50)t−8.00=15.0t−8.00\alpha(t) = \frac{d\omega}{dt} = 2(7.50)t - 8.00 = 15.0t - 8.00.

  2. Evaluate at t=2.00 st = 2.00\text{ s}: α(2.00)=15.0(2.00)−8.00=30.0−8.00=22.0 rad/s2\alpha(2.00) = 15.0(2.00) - 8.00 = 30.0 - 8.00 = 22.0\text{ rad/s}^2.

Final answer

α(2.00 s)=22.0 rad/s2\alpha(2.00\text{ s}) = 22.0\text{ rad/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the rotational calculus ladder: θ(t)→d/dtω(t)→d/dtα(t)\theta(t) \xrightarrow{d/dt} \omega(t) \xrightarrow{d/dt} \alpha(t).

  • Check your units at each step: differentiating by time divides units by seconds (rad→rad/s→rad/s2\text{rad} \to \text{rad/s} \to \text{rad/s}^2), whereas integrating multiplies units by seconds.

  • Practice moving in both directions (differentiation forward and integration backward) with polynomial kinematic functions.

Lock it in

Similar question

01

A rotating disk has an angular position given by θ(t)=4.0t2−2.0t\theta(t) = 4.0 t^2 - 2.0 t, where tt is in seconds and θ\theta is in radians. Calculate the angular displacement Δθ\Delta\theta between t=1.0 st = 1.0\text{ s} and t=4.0 st = 4.0\text{ s}.

Answer

Δθ=54 rad\Delta\theta = 54\text{ rad}. Key steps: θ(4.0)=4.0(16)−2.0(4.0)=56 rad\theta(4.0) = 4.0(16) - 2.0(4.0) = 56\text{ rad}; θ(1.0)=4.0(1.0)−2.0(1.0)=2.0 rad\theta(1.0) = 4.0(1.0) - 2.0(1.0) = 2.0\text{ rad}; Δθ=56−2.0=54 rad\Delta\theta = 56 - 2.0 = 54\text{ rad}.

02

The angular position of a flywheel is θ(t)=2.0t3−6.0t+5.0 rad\theta(t) = 2.0 t^3 - 6.0 t + 5.0\text{ rad}. Find (a) the average angular velocity ωavg\omega_{\text{avg}} between t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}, and (b) the instantaneous angular velocity ω(t)\omega(t) at t=2.0 st = 2.0\text{ s}.

Answer

(a) ωavg=20 rad/s\omega_{\text{avg}} = 20\text{ rad/s}; (b) ω(2.0 s)=18 rad/s\omega(2.0\text{ s}) = 18\text{ rad/s}. Key steps: (a) θ(3.0)=41 rad\theta(3.0) = 41\text{ rad}, θ(1.0)=1.0 rad\theta(1.0) = 1.0\text{ rad}, Δθ=40 rad\Delta\theta = 40\text{ rad}, ωavg=40 rad2.0 s=20 rad/s\omega_{\text{avg}} = \frac{40\text{ rad}}{2.0\text{ s}} = 20\text{ rad/s}. (b) ω(t)=dθdt=6.0t2−6.0\omega(t) = \frac{d\theta}{dt} = 6.0 t^2 - 6.0; ω(2.0)=6.0(4)−6.0=18 rad/s\omega(2.0) = 6.0(4) - 6.0 = 18\text{ rad/s}.

03

A centrifuge rotor decelerates according to θ(t)=50.0t−2.50t2\theta(t) = 50.0 t - 2.50 t^2, valid until it stops. Find the total angular displacement from t=2.00 st = 2.00\text{ s} to the moment the rotor comes to rest.

Answer

Δθ=160 rad\Delta\theta = 160\text{ rad}. Key steps: Find stopping time via ω(t)=50.0−5.00t=0  ⟹  tstop=10.0 s\omega(t) = 50.0 - 5.00 t = 0 \implies t_{\text{stop}} = 10.0\text{ s}. Evaluate positions: θ(10.0)=50.0(10.0)−2.50(100)=250 rad\theta(10.0) = 50.0(10.0) - 2.50(100) = 250\text{ rad}; θ(2.00)=50.0(2.00)−2.50(4.00)=90.0 rad\theta(2.00) = 50.0(2.00) - 2.50(4.00) = 90.0\text{ rad}. Compute displacement: Δθ=250−90.0=160 rad\Delta\theta = 250 - 90.0 = 160\text{ rad}.

Loading workspace…