Resources
During an drop-tower crash safety test, a mobile sensor pack of unknown total mass strikes an energy-absorbing foam pad while moving downward at an impact velocity of . The sensor pack rebounds vertically upward off the foam pad at a speed of . Telemetry recorded during the impact reveals that the foam pad extended the interaction time to , resulting in an average upward contact force from the pad of . Taking downward and accounting for the gravitational force during the impact interval, determine the mass of the sensor pack.
Answer and steps
Final answer
Steps
Set Up the Coordinate System and State the Impulse-Momentum Theorem
Choose the vertically upward direction as positive (). Under this convention:
- Initial impact velocity:
- Rebound velocity:
- Time interval of impact:
- Average upward contact force from the pad:
- Acceleration due to gravity: (acting downward)
The impulse-momentum theorem states that the net impulse delivered to an object equals its change in linear momentum:
Determine the Net Force Acting During the Impact
During the collision, two vertical forces act on the sensor pack simultaneously:
- The upward normal/contact force exerted by the foam pad:
- The downward force of gravity:
The net average vertical force is therefore:
Common Pitfall: A frequent mistake is equating the pad's contact force directly to the net force (). Because gravity continues to pull the sensor pack downward throughout the collision interval , the pad must both support the sensor's weight and provide the upward acceleration to reverse its momentum.
Formulate and Solve for Mass
Substitute the net force into the impulse-momentum equation:
Expand and group terms containing the unknown mass :
Dividing through by gives the equivalent form in terms of average upward acceleration :
Substitute Numerical Values
First, calculate the change in velocity:
Next, calculate the effective acceleration term:
Now compute the mass:
Typical errors
01 The student neglects the downward gravitational force during the collision interval, equating the impulse of the contact force alone to the total change in momentum.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The impulse-momentum theorem requires the net force acting on the pack. Because gravity acts downward throughout the collision, the net upward force is , not alone.
- Step 4Correct
Because your impulse-momentum relation omitted the weight of the sensor pack, the computed mass was too large.
WHAT YOU DID WELL
Compliments from Your TeacherYou handled the vector signs properly when calculating the change in velocity .
You correctly computed the product of the contact force and the collision duration.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the normal contact force exerted by the foam pad as the entire net force, overlooking the fact that gravity continues to act downward on the sensor pack during the impact.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify all vertical forces
During vertical collisions near Earth's surface, the net force is (taking upward as positive).
Always draw a free-body diagram of the object during impact to confirm whether weight must be included in the net force.
- Group unknown mass terms
.
Collect all terms containing on one side of the equation before solving for the mass.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the impulse-momentum equation with the net force: .
Rearrange to solve for : .
Substitute the numerical values: .
02 The student subtracts the speeds without accounting for the reversal in velocity direction, computing Δv as 10.0 m/s instead of 14.0 m/s.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Velocity is a vector quantity that carries direction. Because the sensor pack reverses direction from downward () to upward (), the total change in velocity must account for stopping the downward motion and accelerating upward, giving a magnitude of rather than .
- Step 2
- Step 3Correct
(or with two significant figures)
Your arithmetic evaluation followed your formula faithfully, but this calculation was affected by substituting from Step 1 instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that gravity acts simultaneously with the pad's contact force during the collision interval.
You set up the net vertical impulse equation properly.
You demonstrated clean algebraic manipulation when factoring and isolating the unknown mass .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou subtracted the speed values directly, forgetting that reversing direction makes the change in velocity the sum of their speeds.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating 1D velocity vectors as scalar magnitudes during direction reversal collisions, conflating scalar speed change with vector velocity change .
REASONING PATH
Your ACEpath teacher’s suggested approach- Define a Coordinate Axis First
Every 1D kinematics or momentum equation requires an explicit positive direction (e.g., upward is positive).
Assign upward: record and before writing .
- Vector Difference Formula
Change in velocity is strictly , not .
Write the double-negative explicitly: .
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the vector change in velocity: .
Compute the effective denominator: .
Solve for : (rounds to per reference rounding).
03 The student adds gravity in the direction of the pad force when setting up the net force equation, subtracting g Δt instead of adding it when solving for mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because gravity acts downward while the contact force from the pad acts upward, the net vertical force is , not .
- Step 3Correct
This numerical substitution followed your earlier sign error in the denominator.
- Step 4Correct
Your arithmetic evaluation was executed correctly based on your formula, but the result was affected by the initial sign error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly established the upward coordinate direction and evaluated the change in velocity .
You recognized that gravity acts during the impact and must be accounted for in the net impulse.
You performed correct algebraic manipulations and arithmetic on your working equation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally added downward gravity in the same direction as the upward contact force when writing .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the sign of individual vertical force components when formulating . With upward chosen as positive, the upward contact force is and the downward gravitational force is , making the net upward force .
REASONING PATH
Your ACEpath teacher’s suggested approach- Coordinate Sign Convention
Every vertical force component must carry a sign matching its physical direction: upward forces are positive, and downward forces are negative.
Always sketch a quick free-body diagram during the collision: points upward , while points downward , giving .
- Physical Reasonableness Check
An upward contact force must overcome gravity in addition to accelerating the mass upward.
Verify that ; because the pad must support the object's weight while reversing its momentum, is strictly greater than .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the net vertical force with upward as positive: .
Apply the impulse-momentum theorem: .
Rearrange to isolate : .
Substitute the known values: .
Lock it in
What does the impulse-momentum theorem state in terms of force and change in momentum?
It states that the net impulse equals the change in momentum: . The force must be the vector sum of all external forces, not just a single contact force.
Similar question
A padded package falls vertically onto a platform with an impact speed of and is brought to rest in . Taking downward and including gravity during contact, find the average upward force exerted by the platform.
Answer
. Key steps: Taking upward as positive, . Apply .
A drop hammer of unknown mass strikes an anvil moving downward at and rebounds upward at . The collision lasts , during which the anvil exerts an average upward force of . Accounting for gravity (), determine the mass of the hammer.
Answer
. Key steps: . Effective acceleration is . Solve for mass: (to 3 significant figures, ).
An emergency elevator arrestor mechanism must stop a falling cab of mass traveling downward at so that its upward rebound speed does not exceed . If the arrestor can withstand a maximum average upward support force of , find the minimum contact duration required. Use .
Answer
. Key steps: . Net upward force is . From , solve for time: .