Resources

A tiny spherical oil droplet with mass m=1.80×10−14 kgm = 1.80\times 10^{-14}\text{ kg} and net negative charge q=−4.80×10−19 Cq = -4.80\times 10^{-19}\text{ C} is suspended between two extensive, horizontal parallel plates separated by d=1.20 cmd = 1.20\text{ cm}. The lower plate is held at 0.00 V0.00\text{ V}. (a) Find the critical potential VcritV_{\text{crit}} that must be applied to the upper plate to establish impending vertical motion (i.e., exact static equilibrium balancing the gravitational force g=9.80 m/s2g = 9.80\text{ m/s}^2). (b) Identify the required direction of the electric field lines and the orientation of the equipotential surfaces in the gap. (c) If the upper plate's potential is increased past this threshold to V=5.00×103 VV = 5.00\times 10^3\text{ V}, calculate the instantaneous vertical acceleration aa of the droplet.

Answer and steps

Final answer

(a) Vcrit=4.41×103 VV_{\text{crit}} = 4.41\times 10^3\text{ V}; (b) Electric field lines point vertically downward; equipotential surfaces are horizontal planes parallel to the plates; (c) a=1.31 m/s2a = 1.31\text{ m/s}^2 directed upward

Steps

Part (a): Critical Potential VcritV_{\text{crit}} for Static Equilibrium

To suspend the oil droplet in static equilibrium, the upward electric force must balance the downward gravitational force:

Fe=FgF_e = F_g

  1. Calculate the gravitational force (FgF_g): Fg=mg=(1.80×10−14 kg)(9.80 m/s2)=1.764×10−13 NF_g = mg = (1.80\times 10^{-14}\text{ kg})(9.80\text{ m/s}^2) = 1.764\times 10^{-13}\text{ N}
  2. Relate electric force to electric field (EE): The magnitude of the electrostatic force on a charge qq in a uniform electric field EE between parallel plates is: Fe=∣q∣EF_e = |q|E

    Setting Fe=FgF_e = F_g: E=mg∣q∣=1.764×10−13 N4.80×10−19 C=3.675×105 V/mE = \frac{mg}{|q|} = \frac{1.764\times 10^{-13}\text{ N}}{4.80\times 10^{-19}\text{ C}} = 3.675\times 10^5\text{ V/m}

  3. Determine the critical potential difference (VcritV_{\text{crit}}): For parallel plates separated by distance d=1.20 cm=0.0120 md = 1.20\text{ cm} = 0.0120\text{ m}, the uniform electric field relates to the potential difference by V=E⋅dV = E \cdot d: Vcrit=E⋅d=(3.675×105 V/m)(0.0120 m)=4.41×103 VV_{\text{crit}} = E \cdot d = (3.675\times 10^5\text{ V/m})(0.0120\text{ m}) = 4.41\times 10^3\text{ V}

Since the lower plate is at 0.00 V0.00\text{ V}, the upper plate must be held at Vcrit=4.41×103 VV_{\text{crit}} = 4.41\times 10^3\text{ V}.


Part (b): Direction of Field Lines and Equipotential Surfaces

  • Direction of Electric Field Lines: The droplet carries a negative charge (q<0q < 0). The force on a negative charge is antiparallel to the field (F⃗e=qE⃗\vec{F}_e = q\vec{E}). For the electrostatic force to be directed vertically upward (opposing gravity), the electric field E⃗\vec{E} must point vertically downward (from the higher potential upper plate to the lower potential bottom plate).

    Common Pitfall: Assuming electric field points in the direction of the desired force. A positive charge moves along field lines, but a negative charge is accelerated opposite to the field lines.

  • Orientation of Equipotential Surfaces: Equipotential surfaces are always perpendicular to electric field lines. Since the field lines are vertical and uniform throughout the gap, the equipotential surfaces are horizontal planes parallel to the plates.

Part (c): Vertical Acceleration when V=5.00×103 VV = 5.00\times 10^3\text{ V}

When the potential is increased to V=5.00×103 VV = 5.00\times 10^3\text{ V}, the electric field increases:

E′=Vd=5.00×103 V0.0120 m≈4.167×105 V/mE' = \frac{V}{d} = \frac{5.00\times 10^3\text{ V}}{0.0120\text{ m}} \approx 4.167\times 10^5\text{ V/m}

  1. Calculate the new upward electric force (Fe′F_e'): Fe′=∣q∣E′=(4.80×10−19 C)(4.167×105 V/m)=2.00×10−13 NF_e' = |q|E' = (4.80\times 10^{-19}\text{ C})(4.167\times 10^5\text{ V/m}) = 2.00\times 10^{-13}\text{ N}
  2. Apply Newton's Second Law: Taking the upward direction as positive: Fnet=Fe′−mg=2.00×10−13 N−1.764×10−13 N=2.36×10−14 NF_{\text{net}} = F_e' - mg = 2.00\times 10^{-13}\text{ N} - 1.764\times 10^{-13}\text{ N} = 2.36\times 10^{-14}\text{ N}
  3. Calculate the acceleration (aa): a=Fnetm=2.36×10−14 N1.80×10−14 kg≈1.31 m/s2a = \frac{F_{\text{net}}}{m} = \frac{2.36\times 10^{-14}\text{ N}}{1.80\times 10^{-14}\text{ kg}} \approx 1.31\text{ m/s}^2

The droplet accelerates at a=1.31 m/s2a = 1.31\text{ m/s}^2 directed vertically upward.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert plate separation from centimeters to meters, resulting in a critical voltage and electric force that are two orders of magnitude too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fe=Fg  ⟹  q(Vd)=mg  ⟹  Vcrit=mgdqF_e = F_g \implies q\left(\frac{V}{d}\right) = mg \implies V_{\text{crit}} = \frac{mgd}{q}

  2. Step 2

    Vcrit=(1.80×10−14)(9.80)(1.20)(4.80×10−19)=4.41×105 VV_{\text{crit}} = \frac{(1.80\times 10^{-14})(9.80)(1.20)}{(4.80\times 10^{-19})} = 4.41\times 10^5\text{ V}

    Correct

    Vcrit=(1.80×10−14 kg)(9.80 m/s2)(0.0120 m)4.80×10−19 C=4.41×103 VV_{\text{crit}} = \frac{(1.80\times 10^{-14}\text{ kg})(9.80\text{ m/s}^2)(0.0120\text{ m})}{4.80\times 10^{-19}\text{ C}} = 4.41\times 10^3\text{ V}

    You substituted d=1.20d = 1.20 directly instead of converting the plate separation from centimeters to SI meters (d=1.20 cm=1.20×10−2 md = 1.20\text{ cm} = 1.20\times 10^{-2}\text{ m}). This made your potential two orders of magnitude too large.

  3. Step 3

    Electric field points vertically downward.  ⟹  Equipotential surfaces are horizontal planes parallel to the plates.\text{Electric field points vertically downward.} \implies \text{Equipotential surfaces are horizontal planes parallel to the plates.}

  4. Step 4

    Fe=qVd=(4.80×10−19)(5.00×103)1.20=2.00×10−15 N  ⟹  Fg=mg=1.764×10−13 N  ⟹  Fnet=−1.744×10−13 N  ⟹  a=−9.69 m/s2 (downward)F_e = \frac{qV}{d} = \frac{(4.80\times 10^{-19})(5.00\times 10^3)}{1.20} = 2.00\times 10^{-15}\text{ N} \implies F_g = mg = 1.764\times 10^{-13}\text{ N} \implies F_{\text{net}} = -1.744\times 10^{-13}\text{ N} \implies a = -9.69\text{ m/s}^2\text{ (downward)}

    Correct

    Fe=∣q∣Vd=(4.80×10−19 C)(5.00×103 V)0.0120 m=2.00×10−13 N  ⟹  Fnet=Fe−Fg=2.36×10−14 N  ⟹  a=Fnetm=1.31 m/s2 (upward)F_e = \frac{|q|V}{d} = \frac{(4.80\times 10^{-19}\text{ C})(5.00\times 10^3\text{ V})}{0.0120\text{ m}} = 2.00\times 10^{-13}\text{ N} \implies F_{\text{net}} = F_e - F_g = 2.36\times 10^{-14}\text{ N} \implies a = \frac{F_{\text{net}}}{m} = 1.31\text{ m/s}^2\text{ (upward)}

    Because you substituted d=1.20d = 1.20 without converting centimeters to meters, the electric force was calculated as 2.00×10−15 N2.00\times 10^{-15}\text{ N} instead of 2.00×10−13 N2.00\times 10^{-13}\text{ N}. Since the true applied potential of 5.00×103 V5.00\times 10^3\text{ V} exceeds Vcrit=4.41×103 VV_{\text{crit}} = 4.41\times 10^3\text{ V}, the upward electrostatic force should exceed gravity, producing an upward acceleration of 1.31 m/s21.31\text{ m/s}^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the static equilibrium equation Fe=FgF_e = F_g using Fe=qEF_e = qE and E=V/dE = V/d.

You correctly identified that the electric field must point downward for a negative charge to experience an upward force.

You correctly recognized that equipotential surfaces are perpendicular to electric field lines, forming horizontal planes.

You applied Newton's second law Fnet=maF_{\text{net}} = ma with sound algebraic structure.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission

You substituted the plate separation d=1.20 cmd = 1.20\text{ cm} directly as 1.201.20 rather than converting it to meters (0.0120 m0.0120\text{ m}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In electrostatic problems involving parallel plates, plate spacing is often provided in centimeters or millimeters. Omitting the conversion to SI base units (meters) causes derived quantities such as electric field (E=V/dE = V/d) and force (F=qEF = qE) to be scaled incorrectly by powers of ten.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert All Metric Prefixes to Base SI Units First
  • Before substituting numerical values into field or force formulas, convert all non-base lengths (cm\text{cm}, mm\text{mm}, μm\mu\text{m}) into meters (m\text{m}).

  • Write out d=1.20 cm=1.20×10−2 md = 1.20\text{ cm} = 1.20\times 10^{-2}\text{ m} explicitly in your given-variables list before calculating.

Sanity-Check Applied Potential Against Critical Threshold
  • If the applied voltage exceeds the critical suspension voltage (V>VcritV > V_{\text{crit}}), the net force and acceleration must be directed upward along the electric force.

  • Compare V=5.00×103 VV = 5.00\times 10^3\text{ V} with Vcrit=4.41×103 VV_{\text{crit}} = 4.41\times 10^3\text{ V}; since V>VcritV > V_{\text{crit}}, check that your resulting acceleration is upward.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the plate spacing to meters: d=1.20 cm=1.20×10−2 md = 1.20\text{ cm} = 1.20\times 10^{-2}\text{ m}.

  2. Calculate Vcrit=mgd∣q∣=(1.80×10−14 kg)(9.80 m/s2)(0.0120 m)4.80×10−19 C=4.41×103 VV_{\text{crit}} = \frac{mgd}{|q|} = \frac{(1.80\times 10^{-14}\text{ kg})(9.80\text{ m/s}^2)(0.0120\text{ m})}{4.80\times 10^{-19}\text{ C}} = 4.41\times 10^3\text{ V}.

  3. For part (c), calculate the upward electric force at V=5.00×103 VV = 5.00\times 10^3\text{ V}: Fe=∣q∣Vd=(4.80×10−19 C)(5.00×103 V)0.0120 m=2.00×10−13 NF_e = \frac{|q|V}{d} = \frac{(4.80\times 10^{-19}\text{ C})(5.00\times 10^3\text{ V})}{0.0120\text{ m}} = 2.00\times 10^{-13}\text{ N}.

  4. Compute the net upward force: Fnet=Fe−mg=2.00×10−13 N−1.764×10−13 N=2.36×10−14 NF_{\text{net}} = F_e - mg = 2.00\times 10^{-13}\text{ N} - 1.764\times 10^{-13}\text{ N} = 2.36\times 10^{-14}\text{ N}.

  5. Determine the instantaneous vertical acceleration: a=Fnetm=2.36×10−14 N1.80×10−14 kg=1.31 m/s2 upwarda = \frac{F_{\text{net}}}{m} = \frac{2.36\times 10^{-14}\text{ N}}{1.80\times 10^{-14}\text{ kg}} = 1.31\text{ m/s}^2\text{ upward}.

Final answer

(a) Vcrit=4.41×103 VV_{\text{crit}} = 4.41\times 10^3\text{ V}; (b) Electric field points vertically downward; equipotential surfaces are horizontal planes parallel to the plates; (c) a=1.31 m/s2 directed upwarda = 1.31\text{ m/s}^2\text{ directed upward}

NEXT STEPS
Final Takeaways from Your Teacher
  • Develop the habit of writing unit labels next to each variable during substitution to catch unconverted units like centimeters.

  • Use physical threshold checks: whenever an applied voltage exceeds the equilibrium balance voltage, verify that the resulting acceleration acts in the direction of the electric force.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the direction of the electric force on a negative charge with the direction of the electric field lines, concluding that the field must point upward to support the droplet.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    qE=mg  ⟹  E=mgq=(1.80×10−14)(9.80)4.80×10−19=3.675×105 V/m  ⟹  Vcrit=E×d=(3.675×105)(0.0120)=4410 VqE = mg \implies E = \frac{mg}{q} = \frac{(1.80 \times 10^{-14})(9.80)}{4.80 \times 10^{-19}} = 3.675 \times 10^5\text{ V/m} \implies V_{\text{crit}} = E \times d = (3.675 \times 10^5)(0.0120) = 4410\text{ V}

  2. Step 2

    The electric field lines must point vertically upward to push the droplet upward.

    Correct

    The electric field lines must point vertically downward.

    Because the droplet has a negative charge (q<0q < 0), the electric force vector is antiparallel to the electric field vector (F⃗e=qE⃗\vec{F}_e = q\vec{E}). To produce an upward force opposing gravity, the electric field lines must point vertically downward.

  3. Step 3

    The equipotential surfaces are horizontal planes.

  4. Step 4

    Fe=q(Vd)=(4.80×10−19)(50000.0120)=2.00×10−13 N  ⟹  Fnet=Fe−mg=2.36×10−14 N  ⟹  a=Fnetm=1.31 m/s2 upwardF_e = q\left(\frac{V}{d}\right) = (4.80 \times 10^{-19})\left(\frac{5000}{0.0120}\right) = 2.00 \times 10^{-13}\text{ N} \implies F_{\text{net}} = F_e - mg = 2.36 \times 10^{-14}\text{ N} \implies a = \frac{F_{\text{net}}}{m} = 1.31\text{ m/s}^2\text{ upward}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the equilibrium condition qE=mgqE = mg to determine the critical potential.

You identified that equipotential surfaces run perpendicular to field lines as horizontal planes.

You accurately applied Newton's second law to compute the net upward acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electric Field vs Force Direction for Negative Charge

You equated the direction of the electric field directly with the direction of the required force.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the negative sign in the vector relation F⃗e=qE⃗\vec{F}_e = q\vec{E}. A positive test charge experiences a force parallel to E⃗\vec{E}, whereas a negative charge experiences a force antiparallel to E⃗\vec{E}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the sign of the charge in $\vec{F}_e = q\vec{E}$
  • For q>0q > 0, F⃗e\vec{F}_e is in the direction of E⃗\vec{E}; for q<0q < 0, F⃗e\vec{F}_e points in the opposite direction of E⃗\vec{E}.

  • Always draw the required force vector first, inspect the sign of the charge, and reverse the direction if the charge is negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that gravity acts downward, so static equilibrium requires an upward electrostatic force: F⃗e=+Fe j^\vec{F}_e = +F_e\,\hat{j}.

  2. Relate force to field using F⃗e=qE⃗\vec{F}_e = q\vec{E} where q=−4.80×10−19 C<0q = -4.80 \times 10^{-19}\text{ C} < 0.

  3. Conclude E⃗=F⃗eq=−Fe∣q∣ j^\vec{E} = \frac{\vec{F}_e}{q} = -\frac{F_e}{|q|}\,\hat{j}, which points vertically downward.

Final answer

(a) Vcrit=4.41×103 VV_{\text{crit}} = 4.41 \times 10^3\text{ V}; (b) Electric field lines point vertically downward; equipotential surfaces are horizontal planes; (c) a=1.31 m/s2a = 1.31\text{ m/s}^2 directed upward

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector definitions of electric force: F⃗=qE⃗\vec{F} = q\vec{E}.

  • Practice sketching field lines and force vectors for both positive and negative charges in uniform fields.

OverviewACEpath Teacher's Diagnosis

03 The student calculates acceleration solely from the electric force at the increased potential, omitting gravity from Newton's second law.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    q(Vcrit/d)=mg  ⟹  Vcrit=mgdq=(1.80×10−14)(9.80)(0.0120)4.80×10−19  ⟹  Vcrit=4410 Vq(V_{\text{crit}}/d) = mg \implies V_{\text{crit}} = \frac{mgd}{q} = \frac{(1.80\times 10^{-14})(9.80)(0.0120)}{4.80\times 10^{-19}} \implies V_{\text{crit}} = 4410\text{ V}

  2. Step 2

    Electric field points downward. Equipotential surfaces are horizontal planes.

  3. Step 3

    Fe=qE=q(V/d)=(4.80×10−19)(5000/0.0120)=2.00×10−13 NF_e = qE = q(V/d) = (4.80\times 10^{-19})(5000/0.0120) = 2.00\times 10^{-13}\text{ N}

  4. Step 4

    a=Fem=2.00×10−131.80×10−14=11.1 m/s2 upwarda = \frac{F_e}{m} = \frac{2.00\times 10^{-13}}{1.80\times 10^{-14}} = 11.1\text{ m/s}^2\text{ upward}

    Correct

    a=Fnetm=Fe−mgm=2.00×10−13 N−1.764×10−13 N1.80×10−14 kg≈1.31 m/s2 upwarda = \frac{F_{\text{net}}}{m} = \frac{F_e - mg}{m} = \frac{2.00\times 10^{-13}\text{ N} - 1.764\times 10^{-13}\text{ N}}{1.80\times 10^{-14}\text{ kg}} \approx 1.31\text{ m/s}^2\text{ upward}

    Newton's second law requires the net external force Fnet=ΣFF_{\text{net}} = \Sigma F. Because gravity still acts downward with magnitude mg=1.764×10−13 Nmg = 1.764\times 10^{-13}\text{ N}, you must subtract gravity from the upward electric force before dividing by mass.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the static equilibrium condition between electric force and weight in part (a).

You accurately reasoned about field direction for a negative charge and the orientation of equipotentials in part (b).

You correctly evaluated the new electric force at the higher voltage in part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Gravity in Net Force Equation

You set Fnet=FeF_{\text{net}} = F_e instead of Fnet=Fe−mgF_{\text{net}} = F_e - mg when applying Newton's second law.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the newly calculated applied electric force as the entire net force, overlooking that gravity is a continuous external force that does not disappear when voltage changes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always Draw a Free-Body Diagram for Acceleration
  • Newton's second law is F⃗net=ΣF⃗=ma⃗\vec{F}_{\text{net}} = \Sigma \vec{F} = m\vec{a}, which includes all simultaneous forces acting on the body.

  • Before computing aa, list every force vector along the axis of motion (here, upward FeF_e and downward FgF_g).

Check Equilibrium vs. Non-Equilibrium States
  • When V=VcritV = V_{\text{crit}}, Fe=FgF_e = F_g so a=0a = 0. When V>VcritV > V_{\text{crit}}, a=Fe−Fgma = \frac{F_e - F_g}{m}.

  • Verify that your formula for acceleration reduces to 00 when V=VcritV = V_{\text{crit}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the net upward force: Fnet=Fe−mg=2.00×10−13 N−1.764×10−13 N=2.36×10−14 NF_{\text{net}} = F_e - mg = 2.00\times 10^{-13}\text{ N} - 1.764\times 10^{-13}\text{ N} = 2.36\times 10^{-14}\text{ N}.

  2. Divide by the droplet's mass to find acceleration: a=Fnetm=2.36×10−14 N1.80×10−14 kg≈1.31 m/s2a = \frac{F_{\text{net}}}{m} = \frac{2.36\times 10^{-14}\text{ N}}{1.80\times 10^{-14}\text{ kg}} \approx 1.31\text{ m/s}^2.

Final answer

a=1.31 m/s2 directed vertically upwarda = 1.31\text{ m/s}^2\text{ directed vertically upward}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick two-force free-body diagram whenever finding acceleration in a gravitational or electric field.

  • Practice problems where multiple field forces act simultaneously on charged particles.

Lock it in

Similar question

01

A dust particle of mass m=2.50×10−12 kgm = 2.50\times 10^{-12}\text{ kg} carrying a net charge q=−1.60×10−17 Cq = -1.60\times 10^{-17}\text{ C} is suspended in static equilibrium between horizontal parallel plates separated by d=2.00 cmd = 2.00\text{ cm}. Calculate the potential difference ΔV\Delta V required across the plates. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

ΔV=3.06×104 V\Delta V = 3.06\times 10^4\text{ V}. Key steps: Convert separation to meters (d=0.0200 md = 0.0200\text{ m}). Set Fe=Fg  ⟹  ∣q∣ΔVd=mgF_e = F_g \implies |q|\frac{\Delta V}{d} = mg. Solve for ΔV=mgd∣q∣=(2.50×10−12 kg)(9.80 m/s2)(0.0200 m)1.60×10−17 C=3.0625×104 V\Delta V = \frac{mgd}{|q|} = \frac{(2.50\times 10^{-12}\text{ kg})(9.80\text{ m/s}^2)(0.0200\text{ m})}{1.60\times 10^{-17}\text{ C}} = 3.0625\times 10^4\text{ V}.

02

Two horizontal parallel plates are separated by d=8.00 mmd = 8.00\text{ mm}, with the lower plate at 0 V0\text{ V} and the upper plate at +600 V+600\text{ V}. A droplet with mass m=4.00×10−15 kgm = 4.00\times 10^{-15}\text{ kg} and charge q=−3.20×10−18 Cq = -3.20\times 10^{-18}\text{ C} is released between the plates. Determine the net vertical acceleration aa of the droplet. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

a=50.2 m/s2 upwarda = 50.2\text{ m/s}^2\text{ upward}. Key steps: Convert distance to meters (d=0.00800 md = 0.00800\text{ m}). Electric field E=Vd=6000.00800=7.50×104 V/mE = \frac{V}{d} = \frac{600}{0.00800} = 7.50\times 10^4\text{ V/m} pointing downward. Upward force Fe=∣q∣E=2.40×10−13 NF_e = |q|E = 2.40\times 10^{-13}\text{ N}. Downward gravity Fg=mg=3.92×10−14 NF_g = mg = 3.92\times 10^{-14}\text{ N}. Net force Fnet=Fe−Fg=2.008×10−13 NF_{\text{net}} = F_e - F_g = 2.008\times 10^{-13}\text{ N}. Acceleration a=Fnetm=50.2 m/s2a = \frac{F_{\text{net}}}{m} = 50.2\text{ m/s}^2 upward.

03

An oil droplet of mass mm and negative charge q=−2eq = -2e is held in equilibrium between horizontal plates separated by d=1.50 cmd = 1.50\text{ cm} when the top plate is at V1=3.00×103 VV_1 = 3.00\times 10^3\text{ V} and the bottom plate is at 0 V0\text{ V}. If the plate separation is suddenly expanded to d′=2.00 cmd' = 2.00\text{ cm} while keeping the plate potentials fixed, find the droplet's new vertical acceleration in terms of gg.

Answer

a=−0.250g=−2.45 m/s2 (downward)a = -0.250g = -2.45\text{ m/s}^2\text{ (downward)}. Key steps: In initial equilibrium, Fe0=∣q∣V1d=mgF_{e0} = \frac{|q|V_1}{d} = mg. When plate separation increases to d′=43dd' = \frac{4}{3}d, the new electric field is E′=V1d′=34E0E' = \frac{V_1}{d'} = \frac{3}{4}E_0, so the new electric force is Fe′=34mgF_e' = \frac{3}{4}mg. The net force is Fnet=Fe′−mg=34mg−mg=−14mgF_{\text{net}} = F_e' - mg = \frac{3}{4}mg - mg = -\frac{1}{4}mg. Thus, a=−14g=−0.250ga = -\frac{1}{4}g = -0.250g (accelerating downward).

Loading workspace…