Resources
An automated sensor positioned at ground level detects a metal canister impacting the ground with a downward impact speed of . Telemetry confirms that the canister had been launched vertically upward from the edge of an elevated observation platform located at a height of above the ground, and traveled under constant gravitational acceleration () with negligible air drag throughout its entire trajectory. Reverse-engineer this motion to determine the canister's initial vertical launch speed when it left the platform.
Answer and steps
Final answer
Steps
Set up the coordinate system and identify known values
To find the initial vertical launch speed , we can model the canister's motion under constant gravitational acceleration using kinematics or conservation of mechanical energy.
Choose the upward direction as positive (), with the ground as the reference level ():
- Initial vertical position:
- Final vertical position at ground impact:
- Total vertical displacement:
- Acceleration:
- Final velocity at impact: (directed downward)
Apply the kinematic relation
The kinematic equation relating initial velocity, final velocity, acceleration, and displacement independent of time is:
Substitute the known values into the equation:
Solve for the launch speed
Calculate the squared terms:
Substitute these back into the equation:
Isolate :
Take the positive square root since the canister was launched vertically upward:
Pitfall to avoid: The canister reaches an apex above the platform before falling to the ground, but because gravity is conservative and constant throughout the entire flight, the kinematic equation applies directly between the launch point and the impact point without needing to calculate the apex height or time of flight separately.
Typical errors
01 The student confuses the sign of the vertical displacement or acceleration, adding the gravitational potential term instead of subtracting it to get v₀² = v_impact² + 2gh.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When solving for , subtracting from both sides yields . Because the canister lands lower than its launch point, gravity does positive work overall, so the launch speed must be smaller than the impact speed.
- Step 3Correct
Your numerical calculations are mechanically consistent with your rearranged formula, but the result is affected by the sign error in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the relevant kinematic relationship connecting initial velocity, final velocity, acceleration, and displacement.
You substituted the correct numerical values for gravitational acceleration, platform height, and impact speed.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou added instead of subtracting it when transposing the term across the equals sign to isolate .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIncomplete verification of physical reasonableness: when an object ends up at a lower elevation than where it started, it gains kinetic energy, so must exceed .
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolate Variables by Inverse Operations
If , then .
Subtract from to isolate before plugging in numbers.
- Physical Reality Check
When an object falls below its launch height in free fall, .
Compare your calculated with ; if despite landing below the launch point, re-check your signs.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubtract from both sides of :
Substitute the known values:
Take the positive square root:
02 The student assumes the canister was dropped from rest from the platform rather than launched upward, solving v_impact² = 2gh and concluding that initial speed is zero.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You assumed the canister was released from rest (), but the problem states it was launched vertically upward with an initial speed that needs to be calculated.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the kinematic formula connecting initial speed, impact speed, gravitational acceleration, and vertical displacement.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the object as if it were dropped from rest instead of solving for its upward launch speed.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating a general free-fall problem with a drop-from-rest scenario led you to set the target unknown variable () to zero rather than solving for it using the given impact velocity.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Knowns vs. Unknowns
Read the problem text carefully to distinguish given values from quantities you are asked to find.
Mark as the unknown to isolate, and note that 'launched upward' implies .
- Work-Energy / Kinematic Sign Consistency
Between the launch height and the ground (), net downward displacement is , so .
Substitute and to isolate .
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the known impact speed , , and platform height :
Evaluate the numerical terms:
Isolate :
Take the square root to find the initial upward speed:
03 The student misapplies the linear kinematic formula v = v₀ + gt without time by confusing velocity squared with velocity, writing v_impact = v₀ - gt and erroneously using √h or h in place of t.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Kinematic formulas and conservation of energy relate the squares of velocities: . Because , the velocity gained from falling does not linearly add to the launch velocity.
- Step 2Correct
Your arithmetic evaluating was accurate, but substituting into the invalid linear relationship propagates the initial error.
- Step 3Correct
Your subtraction step was computed cleanly, but solving the incorrect linear formula yielded instead of the correct value .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the vertical drop height of contributes an additional term dependent on .
You accurately computed the square root .
You neatly solved for using standard algebraic isolation.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the kinetic energy / kinematic relationship as linear in velocity by writing , effectively distributing a square root over addition: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Work-Energy and Kinematic Equivalence
Under constant acceleration , velocity changes through height according to , not .
Always write the time-independent equation in squared form () first before isolating any velocity term.
- Algebraic Square Root Rule
.
Combine terms under the radical or isolate the squared variable before taking the square root of both sides.
CORRECTED PATH
ACEpath Teacher's DemonstrationLock it in
For an object in free fall with initial speed and final speed after a vertical drop of , what is the relationship between and ?
, which implies . The object gains kinetic energy as it descends, so .
Similar question
A stone is thrown vertically upward from the top of a high building and strikes the ground at . Neglecting air resistance and using , find its initial launch speed .
Answer
. Key steps: .
A probe is launched vertically upward from the edge of a cliff on Mars () and hits the canyon floor with an impact speed of . Determine the launch speed .
Answer
. Key steps: .
A ball is launched vertically upward from an elevated platform of height . It reaches a maximum apex height of above the platform before falling to the ground. Using , find its launch speed and its impact speed at the ground.
Answer
and . Key steps: At the apex, . For ground impact: .