Resources

A lightweight rigid rod of length L=0.600 mL = 0.600\text{ m} has negligible mass and carries two small concentrated lead beads, each of mass m=0.250 kgm = 0.250\text{ kg}, mounted symmetrically at a distance rr from a central perpendicular rotation axis (0<r≤L20 < r \le \frac{L}{2}). The system rotates at a fixed angular speed ω=20.0 rad/s\omega = 20.0\text{ rad/s}. The total moment of inertia is I(r)=2mr2I(r) = 2mr^2. (a) Determine the asymptotic upper limit of the rotational kinetic energy Krot,maxK_{\text{rot,max}} as the beads are shifted to the extreme outer tips of the rod (r→L2=0.300 mr \to \frac{L}{2} = 0.300\text{ m}). (b) Determine the limiting value of KrotK_{\text{rot}} as the beads are shifted inward toward the axis of rotation (r→0r \to 0).

Answer and steps

Final answer

(a) Krot,max=9.00 JK_{\text{rot,max}} = 9.00\text{ J}; (b) lim⁡r→0Krot=0 J\lim_{r \to 0} K_{\text{rot}} = 0\text{ J}

Steps

01

General Formula for Rotational Kinetic Energy

The rotational kinetic energy KrotK_{\text{rot}} of a rotating rigid system with moment of inertia II and angular velocity ω\omega is defined as: Krot=12Iω2K_{\text{rot}} = \frac{1}{2} I \omega^2

Given that the rod has negligible mass and the two point masses mm are positioned symmetrically at distance rr from the central axis, the total moment of inertia is: I(r)=2mr2I(r) = 2mr^2

Substituting I(r)I(r) into the expression for rotational kinetic energy: Krot(r)=12(2mr2)ω2=mr2ω2K_{\text{rot}}(r) = \frac{1}{2}\left(2mr^2\right)\omega^2 = m r^2 \omega^2


02

Part (a): Maximum Kinetic Energy at the Outer Tips (r→L2r \to \frac{L}{2})

As the beads are moved to the extreme outer tips of the rod, the radial distance reaches its maximum allowed value: rmax=L2=0.600 m2=0.300 mr_{\text{max}} = \frac{L}{2} = \frac{0.600\text{ m}}{2} = 0.300\text{ m}

Substitute the given numerical values into the kinetic energy equation:

  • m=0.250 kgm = 0.250\text{ kg}
  • r=0.300 mr = 0.300\text{ m}
  • ω=20.0 rad/s\omega = 20.0\text{ rad/s}

Krot,max=(0.250 kg)⋅(0.300 m)2⋅(20.0 rad/s)2K_{\text{rot,max}} = (0.250\text{ kg}) \cdot (0.300\text{ m})^2 \cdot (20.0\text{ rad/s})^2 Krot,max=0.250⋅0.0900⋅400 J=9.00 JK_{\text{rot,max}} = 0.250 \cdot 0.0900 \cdot 400\text{ J} = 9.00\text{ J}


03

Part (b): Limiting Kinetic Energy Near the Rotation Axis (r→0r \to 0)

Taking the limit of the rotational kinetic energy as the beads approach the rotation axis: lim⁡r→0Krot(r)=lim⁡r→0(mr2ω2)\lim_{r \to 0} K_{\text{rot}}(r) = \lim_{r \to 0} \left(m r^2 \omega^2\right)

Because mm and ω\omega are held constant, the moment of inertia vanishes as r2→0r^2 \to 0: lim⁡r→0Krot=0 J\lim_{r \to 0} K_{\text{rot}} = 0\text{ J}

Common Pitfall: Do not confuse constant angular speed (ω\omega) problems with systems undergoing angular momentum conservation (Lang=Iω=constantL_{\text{ang}} = I\omega = \text{constant}). In this scenario, ω\omega is explicitly kept fixed at 20.0 rad/s20.0\text{ rad/s} by an external drive, so KrotK_{\text{rot}} varies proportionally to r2r^2 rather than inversely.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the angular speed in the rotational kinetic energy formula K_rot = (1/2)Iω, leading to an answer that is a factor of ω too small.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Imax=2(0.250)(0.300)2=0.0450 kg⋅m2I_{\text{max}} = 2(0.250)(0.300)^2 = 0.0450\text{ kg}\cdot\text{m}^2

  2. Step 2

    Krot,max=(12)Imax⋅ω  ⟹  Krot,max=(12)(0.0450)(20.0)=0.450 JK_{\text{rot,max}} = \left(\frac{1}{2}\right)I_{\text{max}}\cdot \omega \implies K_{\text{rot,max}} = \left(\frac{1}{2}\right)(0.0450)(20.0) = 0.450\text{ J}

    Correct

    Krot,max=12Imaxω2=12(0.0450 kg⋅m2)(20.0 rad/s)2=9.00 JK_{\text{rot,max}} = \frac{1}{2}I_{\text{max}}\omega^2 = \frac{1}{2}(0.0450\text{ kg}\cdot\text{m}^2)(20.0\text{ rad/s})^2 = 9.00\text{ J}

    You used the linear power-like form 12Iω\frac{1}{2}I\omega rather than the kinetic energy formula Krot=12Iω2K_{\text{rot}} = \frac{1}{2}I\omega^2. Because ω\omega was not squared, the result was divided by ω=20.0 rad/s\omega = 20.0\text{ rad/s}.

  3. Step 3

    As r→0, I→0  ⟹  Krot=(12)(0)(20.0)=0 J\text{As } r \to 0,\ I \to 0 \implies K_{\text{rot}} = \left(\frac{1}{2}\right)(0)(20.0) = 0\text{ J}

    Correct

    lim⁡r→0Krot=lim⁡r→012I(r)ω2=12(0)(20.0 rad/s)2=0 J\lim_{r \to 0} K_{\text{rot}} = \lim_{r \to 0} \frac{1}{2}I(r)\omega^2 = \frac{1}{2}(0)(20.0\text{ rad/s})^2 = 0\text{ J}

    Your physical reasoning that I→0I \to 0 leads to Krot→0 JK_{\text{rot}} \to 0\text{ J} is completely correct, though the substituted line still reflects the un-squared ω\omega from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the maximum radial position r=0.300 mr = 0.300\text{ m} into I=2mr2I = 2mr^2.

You correctly calculated the numerical value of Imax=0.0450 kg⋅m2I_{\text{max}} = 0.0450\text{ kg}\cdot\text{m}^2.

You correctly identified that the moment of inertia and rotational kinetic energy vanish as r→0r \to 0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula recall error

You wrote 12Iω\frac{1}{2}I\omega instead of 12Iω2\frac{1}{2}I\omega^2, forgetting to square the angular velocity.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the rotational kinetic energy formula Krot=12Iω2K_{\text{rot}} = \frac{1}{2}I\omega^2 with either angular momentum L=IωL = I\omega or forgetting the quadratic dependence on velocity that is standard across all kinetic energy expressions (K=12mv2↔Krot=12Iω2K = \frac{1}{2}mv^2 \leftrightarrow K_{\text{rot}} = \frac{1}{2}I\omega^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check kinetic energy analogy
  • Every mechanical kinetic energy expression has a quadratic velocity dependence: translational is 12mv2\frac{1}{2}mv^2 and rotational is 12Iω2\frac{1}{2}I\omega^2.

  • Always pair mass mm with inertia II, and linear speed v2v^2 with angular speed ω2\omega^2.

Dimensional analysis sanity check
  • [Iω]=(kg⋅m2)(s−1)=J⋅s[I\omega] = (\text{kg}\cdot\text{m}^2)(\text{s}^{-1}) = \text{J}\cdot\text{s} (action or angular momentum), whereas [Iω2]=(kg⋅m2)(s−2)=J[I\omega^2] = (\text{kg}\cdot\text{m}^2)(\text{s}^{-2}) = \text{J} (energy).

  • Verify that multiplying II by ω\omega once gives units of J⋅s\text{J}\cdot\text{s}, confirming that ω\omega must be squared to yield Joules.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write down the correct rotational kinetic energy formula: Krot,max=12Imaxω2K_{\text{rot,max}} = \frac{1}{2}I_{\text{max}}\omega^2.

  2. Substitute Imax=0.0450 kg⋅m2I_{\text{max}} = 0.0450\text{ kg}\cdot\text{m}^2 and ω=20.0 rad/s\omega = 20.0\text{ rad/s}: Krot,max=12(0.0450)(20.0)2K_{\text{rot,max}} = \frac{1}{2}(0.0450)(20.0)^2.

  3. Evaluate (20.0)2=400 rad2/s2(20.0)^2 = 400\text{ rad}^2/\text{s}^2, giving Krot,max=0.5×0.0450×400=9.00 JK_{\text{rot,max}} = 0.5 \times 0.0450 \times 400 = 9.00\text{ J}.

Final answer

(a) Krot,max=9.00 JK_{\text{rot,max}} = 9.00\text{ J}; (b) lim⁡r→0Krot=0 J\lim_{r \to 0} K_{\text{rot}} = 0\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the parallel table between linear quantities (m,v,p,Km, v, p, K) and rotational quantities (I,ω,L,KrotI, \omega, L, K_{\text{rot}}).

  • Practice checking physical dimensions whenever calculating energy to ensure velocity terms are properly squared.

OverviewACEpath Teacher's Diagnosis

02 The student uses the total length L = 0.600 m instead of the distance to the axis r = L/2 = 0.300 m when computing the moment of inertia, overestimating K_rot,max by a factor of 4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Imax=2(0.250)(0.600)2=0.180 kg⋅m2I_{\text{max}} = 2(0.250)(0.600)^2 = 0.180\text{ kg}\cdot\text{m}^2

    Correct

    Imax=2(0.250)(0.300)2=0.0450 kg⋅m2I_{\text{max}} = 2(0.250)(0.300)^2 = 0.0450\text{ kg}\cdot\text{m}^2

    You substituted the full rod length L=0.600 mL = 0.600\text{ m} for the radial distance rr. Because the rotation axis is located at the center of the rod, the distance from the axis to the outer tips is r=L2=0.300 mr = \frac{L}{2} = 0.300\text{ m}.

  2. Step 2

    Krot,max=12(0.180)(20.0)2=36.0 JK_{\text{rot,max}} = \frac{1}{2}(0.180)(20.0)^2 = 36.0\text{ J}

    Correct

    Krot,max=12(0.0450)(20.0)2=9.00 JK_{\text{rot,max}} = \frac{1}{2}(0.0450)(20.0)^2 = 9.00\text{ J}

    You applied the rotational kinetic energy formula correctly, but your final numerical value was four times too large due to using the incorrect moment of inertia from Step 1.

  3. Step 3

    As r→0, I→0  ⟹  Krot=12(0)(20.0)2=0 J\text{As } r \to 0,\, I \to 0 \implies K_{\text{rot}} = \frac{1}{2}(0)(20.0)^2 = 0\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula for rotational kinetic energy, Krot=12Iω2K_{\text{rot}} = \frac{1}{2}I\omega^2.

You recognized that moment of inertia and kinetic energy vanish as the masses approach the rotation axis in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radius vs. Total Length Confusion

You plugged the total rod length L=0.600 mL = 0.600\text{ m} into I=2mr2I = 2mr^2 instead of the half-length distance r=0.300 mr = 0.300\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total dimension of an object with the perpendicular distance from the rotation axis to the mass elements.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Axis of Rotation
  • In rotational inertia formulas, rr represents the perpendicular distance from the axis of rotation to the mass, not the total length or diameter of the system.

  • Sketch the rotation axis first and label the distance from that axis to each mass element before writing down formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the maximum radius from the central rotation axis to each tip: rmax=L2=0.600 m2=0.300 mr_{\text{max}} = \frac{L}{2} = \frac{0.600\text{ m}}{2} = 0.300\text{ m}.

  2. Compute the maximum moment of inertia: Imax=2mrmax2=2(0.250 kg)(0.300 m)2=0.0450 kg⋅m2I_{\text{max}} = 2mr_{\text{max}}^2 = 2(0.250\text{ kg})(0.300\text{ m})^2 = 0.0450\text{ kg}\cdot\text{m}^2.

  3. Calculate the maximum rotational kinetic energy: Krot,max=12Imaxω2=12(0.0450 kg⋅m2)(20.0 rad/s)2=9.00 JK_{\text{rot,max}} = \frac{1}{2}I_{\text{max}}\omega^2 = \frac{1}{2}(0.0450\text{ kg}\cdot\text{m}^2)(20.0\text{ rad/s})^2 = 9.00\text{ J}.

Final answer

(a) Krot,max=9.00 JK_{\text{rot,max}} = 9.00\text{ J}; (b) lim⁡r→0Krot=0 J\lim_{r \to 0} K_{\text{rot}} = 0\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check whether a given length represents a total span (like a rod length or diameter) or the distance from the pivot/axis.

  • Practice calculating moments of inertia for systems rotated about different pivot locations (e.g., center vs. end).

OverviewACEpath Teacher's Diagnosis

03 The student accounts for only one bead by using I = mr² instead of I = 2mr², halving the maximum moment of inertia and kinetic energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Imax=(0.250)(0.300)2=0.0225 kg⋅m2I_{\text{max}} = (0.250)(0.300)^2 = 0.0225\text{ kg}\cdot\text{m}^2

    Correct

    Imax=2mrmax2=2(0.250 kg)(0.300 m)2=0.0450 kg⋅m2I_{\text{max}} = 2mr_{\text{max}}^2 = 2(0.250\text{ kg})(0.300\text{ m})^2 = 0.0450\text{ kg}\cdot\text{m}^2

    You calculated the moment of inertia for only one bead. Because there are two identical beads mounted symmetrically at distance rr, the total moment of inertia requires a factor of 22: I=2mr2I = 2mr^2.

  2. Step 2

    Krot,max=(12)(0.0225)(20.0)2=4.50 JK_{\text{rot,max}} = \left(\frac{1}{2}\right)(0.0225)(20.0)^2 = 4.50\text{ J}

    Correct

    Krot,max=12Imaxω2=12(0.0450 kg⋅m2)(20.0 rad/s)2=9.00 JK_{\text{rot,max}} = \frac{1}{2}I_{\text{max}}\omega^2 = \frac{1}{2}(0.0450\text{ kg}\cdot\text{m}^2)(20.0\text{ rad/s})^2 = 9.00\text{ J}

    You applied the kinetic energy formula correctly, but your numerical answer was halved due to the missing bead in Step 1.

  3. Step 3

    As r→0, I→0  ⟹  Krot=(12)(0)(20.0)2=0 J\text{As } r \to 0,\ I \to 0 \implies K_{\text{rot}} = \left(\frac{1}{2}\right)(0)(20.0)^2 = 0\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the rotational kinetic energy relation Krot=12Iω2K_{\text{rot}} = \frac{1}{2}I\omega^2.

You correctly recognized that the moment of inertia approaches zero as the radial distance vanishes in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of multiple mass components in moment of inertia

You set I=mr2I = mr^2 for a single bead instead of summing over both beads (Itotal=2mr2I_{\text{total}} = 2mr^2).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the multiplicity of symmetrical point masses when evaluating total rotational inertia from individual components.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sum over all point masses
  • Itotal=∑imiri2I_{\text{total}} = \sum_{i} m_i r_i^2

  • Count every rotating point mass in the system before evaluating numerical quantities.

Combine algebraic terms before substitution
  • Krot=12(2mr2)ω2=mr2ω2K_{\text{rot}} = \frac{1}{2}(2mr^2)\omega^2 = mr^2\omega^2

  • Simplify the total expression analytically first to prevent dropped coefficients.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include both beads: Imax=2(0.250 kg)(0.300 m)2=0.0450 kg⋅m2I_{\text{max}} = 2(0.250\text{ kg})(0.300\text{ m})^2 = 0.0450\text{ kg}\cdot\text{m}^2.

  2. Substitute into kinetic energy: Krot,max=12(0.0450 kg⋅m2)(20.0 rad/s)2=9.00 JK_{\text{rot,max}} = \frac{1}{2}(0.0450\text{ kg}\cdot\text{m}^2)(20.0\text{ rad/s})^2 = 9.00\text{ J}.

Final answer

(a) Krot,max=9.00 JK_{\text{rot,max}} = 9.00\text{ J}; (b) lim⁡r→0Krot=0 J\lim_{r \to 0} K_{\text{rot}} = 0\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the summation form I=∑miri2I = \sum m_i r_i^2 explicitly before substituting numbers.

  • Check that your algebraic coefficient for II accounts for the total number of symmetric bodies described in the problem.

Lock it in

Similar question

01

A solid disk of moment of inertia I=0.120 kg⋅m2I = 0.120\text{ kg}\cdot\text{m}^2 rotates at a constant angular speed of ω=15.0 rad/s\omega = 15.0\text{ rad/s}. Calculate its rotational kinetic energy.

Answer

Krot=12Iω2=12(0.120 kg⋅m2)(15.0 rad/s)2=0.060×225=13.5 JK_{\text{rot}} = \frac{1}{2}I\omega^2 = \frac{1}{2}(0.120\text{ kg}\cdot\text{m}^2)(15.0\text{ rad/s})^2 = 0.060 \times 225 = 13.5\text{ J}.

02

A light rod of length 0.800 m0.800\text{ m} has two 0.500 kg0.500\text{ kg} spheres attached at its ends. It rotates about an axis perpendicular to the rod passing through its midpoint at ω=10.0 rad/s\omega = 10.0\text{ rad/s}. Find the total rotational kinetic energy of the system.

Answer

Each sphere is at distance r=0.8002=0.400 mr = \frac{0.800}{2} = 0.400\text{ m}. The moment of inertia is I=2mr2=2(0.500)(0.400)2=0.160 kg⋅m2I = 2mr^2 = 2(0.500)(0.400)^2 = 0.160\text{ kg}\cdot\text{m}^2. Then Krot=12Iω2=12(0.160 kg⋅m2)(10.0 rad/s)2=0.080×100=8.00 JK_{\text{rot}} = \frac{1}{2}I\omega^2 = \frac{1}{2}(0.160\text{ kg}\cdot\text{m}^2)(10.0\text{ rad/s})^2 = 0.080 \times 100 = 8.00\text{ J}.

03

Two point masses mm are mounted symmetrically on a massless rod of length LL at distance rr from the central axis. If the rod rotates at fixed angular speed ω\omega, by what factor does the rotational kinetic energy increase when the distance of each mass from the axis is doubled from rr to 2r2r?

Answer

Krot=12(2mr2)ω2=mr2ω2K_{\text{rot}} = \frac{1}{2}(2mr^2)\omega^2 = mr^2\omega^2. Since mm and ω\omega are constant, Krot∝r2K_{\text{rot}} \propto r^2. Doubling the radial distance from rr to 2r2r scales r2r^2 by a factor of 22=42^2 = 4, so the kinetic energy increases by a factor of 44.

Loading workspace…