Resources
An industrial cable-and-counterweight hoist is lowering an equipment container of mass vertically downward through a height of at a constant descending velocity. To maintain constant speed against gravitational acceleration, the hoist motor exerts an upward tension force on the support cable, effectively performing negative work on the container by absorbing mechanical energy at an average rate. Over the duration of the descent, which takes , the internal brake and motor system dissipates thermal energy at a rate of due to mechanical friction and electrical resistance. Defining efficiency for an energy-absorption/regenerative braking process as the ratio of useful energy recovered to total available mechanical work entering the system, determine: (a) the magnitude of the gravitational work rate , and (b) the mechanical recovery efficiency . (Take .)
Answer and steps
Final answer
(a) ; (b)
Steps
Calculate the Total Mechanical Work and Gravitational Power Input
Since the container descends at a constant velocity, the net force acting on it is zero. The upward cable tension equals the downward gravitational force:
The work done on the container by gravity as it descends through vertical distance is:
Substitute the given numerical values:
Because the motion occurs at a constant speed, the mechanical energy supplied by gravity is transferred directly to the hoist cable as input energy over time . The magnitude of the gravitational work rate (mechanical power input, ) is:
Rounding to three significant figures gives:
Determine Useful Recovered Power
By the conservation of energy, the total mechanical power entering the hoist system divides into useful recovered power and dissipated thermal power:
Rearranging for the useful power recovered by the system:
Substitute the calculated input power and given dissipation rate:
Calculate the Mechanical Recovery Efficiency
Efficiency for a regenerative or energy-absorbing system is defined as the ratio of useful power recovered to the total available mechanical power entering the system:
Substitute the values:
Rounding to three significant figures gives:
(Common Pitfall: Do not define efficiency as the ratio of dissipated power to input power, or divide by useful power instead of total input mechanical power.)
Typical errors
01 The student confuses useful energy output with dissipated energy loss, calculating efficiency as dissipated power divided by input power.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You set the numerator to the dissipated power rather than the useful recovered power . Efficiency represents the fraction of input energy successfully utilized or recovered, not the fraction lost.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used to calculate the mechanical work done by gravity on the descending load.
You divided the total work by time to find the correct mechanical input power of .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the power lost through dissipation with the useful power output, calculating the loss fraction () instead of the recovery efficiency ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Conservation of Power
Total power entering a system equals useful power plus dissipated power: .
Always find useful power by subtracting dissipated power from total input power before setting up the efficiency ratio.
- Definition of Efficiency
Efficiency is always defined as .
Check whether your numerator represents what you want to keep/recover rather than what was wasted as heat.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the useful recovered power: .
Substitute into the efficiency formula: .
Round to three significant figures: .
(a) ; (b)
02 The student misidentifies total input power as the sum of gravitational power and dissipated power instead of recognizing gravitational power as the total available input.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The gravitational work entering the cable is already the total available input power (). By conservation of energy, the input divides into useful recovered power and dissipated thermal power: . Adding to double-counts the energy instead of subtracting the losses.
- Step 3Correct
Because you defined incorrectly in the previous step, your efficiency formula placed input power in the numerator and an inflated total in the denominator instead of evaluating .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the total gravitational work done on the descending container.
You correctly found the average rate of energy absorption by dividing the total work by the duration.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the total available input energy with one of the output branches. In regenerative braking or lowering processes, the mechanical work absorbed from gravity is the sole energy source (). It splits into useful recovered power and dissipated thermal losses ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Energy Boundary
Always list what energy enters the system first. Any internal friction, heat, or electrical resistance represents losses subtracted from this input, never added to it.
- Definition of Efficiency
Ensure the denominator is the total power fed into the machine, and the numerator represents only the successfully captured or utilized power.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the power conservation relation:
Substitute known values to find useful power:
Compute efficiency:
(a) ; (b)
03 The student multiplies the work by time instead of dividing by time when calculating the work rate in part (a), leading to an incorrect power and an invalid efficiency calculation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Power is the rate of doing work, defined as energy or work divided by time (), not work multiplied by time (). Multiplying produced units of instead of watts ().
- Step 3Correct
Your energy balance relation is conceptually sound, but the numerical result is affected by the incorrect value of from Step 2.
- Step 4Correct
Your definition of efficiency as the ratio of useful power to total input power is correct, but your calculation inherited the erroneous power value from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the gravitational potential energy lost is the mechanical work input .
You correctly applied conservation of energy to relate total input power, dissipated power, and useful recovered power.
You set up the mechanical efficiency ratio accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou multiplied work by time () rather than dividing work by time () when finding power.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the definition of power () with an energy integral or product relationship, overlooking dimensional consistency where .
REASONING PATH
Your ACEpath teacher’s suggested approach- Rate vs. Quantity
Any physical rate with respect to time divides the accumulated quantity by time: .
Whenever you see 'work rate' or 'power', check that you divide joules by seconds.
- Dimensional Sanity Check
.
Verify that multiplying energy by time gives , which is action, not power.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b)
Lock it in
How is energy efficiency universally defined in terms of input and output power?
. It measures the fraction of input power successfully converted into useful work, never the fraction lost.
Similar question
An elevator cab of mass descends vertically at a constant speed of while driving a regenerative generator. The system experiences friction and electrical losses at a rate of . Taking , calculate: (a) the total input power magnitude , and (b) the recovery efficiency .
Answer
(a) . (b) Useful power is , so .
A mine hoist lowers ore carts down an incline, absorbing mechanical work at an average rate of . If the regenerative braking system operates at an efficiency of , determine the rate at which heat energy is dissipated by the braking mechanisms.
Answer
Useful recovered power is . By conservation of energy, .
A crane lowers a concrete beam through a vertical height of in at a constant speed. The crane's regeneration system stores electrical energy in a battery bank at a rate of . Taking , find: (a) the rate of thermal dissipation , and (b) the overall efficiency of the lowering operation.
Answer
(a) Input power . Dissipation is . (b) .