Resources
A sharp, inverted real image of an object is projected onto a fixed sensor screen located a distance directly to the right of the object. The projected image is magnified by a factor of relative to the object (such that lateral magnification ). Determine the focal length of the thin converging lens used to form this image.
Answer and steps
Final answer
Steps
Relate Object Distance and Image Distance Using Magnification
For a thin lens, the lateral magnification relates the image distance to the object distance by:
Given that the image is inverted and magnified by a factor of , we have :
Determine the Positions from the Total Distance
Because the image is real and formed on a screen situated to the right of the object, the lens lies between the object and the screen. The total distance between the object and the screen is the sum of the object distance and the image distance:
Substitute and :
Now find the image distance :
Calculate the Focal Length
Use the thin-lens equation:
Substitute the values for and :
Taking the reciprocal yields:
Common Pitfall: Be careful not to confuse the total separation between object and screen () with either individual distance ( or ). The object-to-image distance for a real image formed by a single lens is always .
Typical errors
01 The student confuses the object-to-image distance with the image distance alone, setting d_i = 80.0 cm rather than d_o + d_i = 80.0 cm.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The problem states that the sensor screen is located from the object. Because a real, focused image is projected onto the screen by a converging lens, the lens is positioned between the object and the screen. Therefore, represents the total separation , not the image distance alone.
- Step 2Correct
You correctly set up the lateral magnification relation, but substituting the incorrect value of led to an incorrect value for .
- Step 3Correct
Your algebra using the thin-lens equation was executed accurately, but the resulting focal length was affected by the upstream distance error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and applied the lateral magnification formula .
You correctly applied the thin-lens formula and executed the fraction arithmetic without calculation slips.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this was a conceptual misunderstanding of the physical layout described in the problem statement.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou interpreted the distance from the object to the screen as the distance from the lens to the image (). For a real image formed on a screen on the opposite side of a lens from an object, the total separation between the object and the image screen is the sum of both distances: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Diagram the physical layout
Distances and are measured relative to the optical center of the lens, not relative to each other.
Always draw a quick optical axis sketch showing the object, the lens in the middle, and the screen, labeling from object to lens and from lens to screen.
- Relate total separation to lens coordinates
For a real image projected onto a screen, the object-to-screen distance is .
Express both and in terms of one variable via magnification, then set their sum equal to the given screen distance before finding .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the total distance: .
Use the magnification condition: .
Substitute into the distance equation: .
Compute the image distance: .
Apply the thin-lens formula: .
02 The student sets the magnification ratio inversely as d_o = 3.00 d_i instead of d_i = 3.00 d_o, placing the lens closer to the screen rather than closer to the object.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Magnification is defined as . For , the image is magnified, which requires the image distance to be larger than the object distance (, not ).
- Step 3Correct
Because of the inverted magnification formula in the previous step, your calculated values for and were swapped.
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the total distance between the object and the screen is .
You correctly recalled and calculated the thin-lens equation .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou inverted the ratio of distances in the magnification definition by writing instead of . When , the image is enlarged, meaning the image must be farther from the lens than the object ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Magnification definition
for thin lenses, meaning .
Always check whether the image is enlarged () or diminished () as a physical reality check.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute into : .
Solve for : .
Find : .
Apply the thin-lens equation: .
03 The student misapplies the sign convention by substituting a negative image distance d_i = -60.0 cm into the lens equation as if the image were virtual.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
A real image that can be projected onto a screen is located on the transmission side of the lens, so its image distance is positive (). The negative sign from the lateral magnification equation already accounts for the inverted orientation: .
- Step 3Correct
Your algebraic fraction subtraction is mathematically consistent with your negative value of , but the addition in the thin-lens equation should use positive values for both real distances.
- Step 4Correct
Because of the sign error in , your calculated focal length was double the actual value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up the geometric constraint that the total object-to-screen distance is the sum of the object and image distances ().
You correctly used the magnification ratio to find .
You correctly applied the thin-lens formula structure and performed exact fraction arithmetic.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou likely associated the negative sign in (inverted image) directly with the image distance rather than using , which yields a positive .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the sign of the lateral magnification with the sign of the image position . For thin lenses, real images formed on the opposite side of the lens always have , while virtual images have .
REASONING PATH
Your ACEpath teacher’s suggested approach- Real vs. Virtual Image Sign Convention
For a single thin lens, an image projected onto a physical screen is always real, meaning . Virtual images cannot be projected onto a screen and have .
Whenever a problem mentions projecting an image onto a screen or sensor, immediately note that must be positive.
- Magnification Formula Disambiguation
. An inverted image has , which requires , meaning both and are positive.
Always substitute both the sign of and the formula explicitly: .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that the image is real because it is projected onto a sensor screen, so : .
Substitute and into the thin-lens equation: .
Invert to obtain the focal length: .
Lock it in
When an object and its sharp real image on a screen are separated by a total distance , what is the relationship between , , and ?
. Both object distance and image distance are measured relative to the lens, which sits between the object and the screen.
Similar question
A slide projector forms a sharp, inverted image on a screen placed directly in front of the slide. If the image is magnified by a factor of (), find the focal length of the projector lens.
Answer
(or ). Key steps: ; and ; .
An illuminated object and a sensor screen are held at a fixed separation of . A converging lens placed between them forms a diminished, real image with a magnification of . Determine the position of the lens relative to the object and the focal length of the lens.
Answer
from the object, and . Key steps: ; total distance , ; .
A converging lens of focal length projects a real, inverted image onto a wall that is away from the object. Find the two possible object distances from the lens that produce a sharp image on the wall.
Answer
or . Key steps: ; thin-lens equation ; .