Resources

A sample of 0.120 mol0.120\text{ mol} of an ideal monatomic gas is enclosed in a vertical cylinder beneath a frictionless, movable piston of mass M=4.50 kgM = 4.50\text{ kg} and cross-sectional area A=2.50×10−3 m2A = 2.50\times 10^{-3}\text{ m}^2. The exterior of the cylinder is exposed to atmospheric pressure Patm=1.013×105 PaP_{\text{atm}} = 1.013\times 10^5\text{ Pa}, and the local acceleration due to gravity is g=9.80 m/s2g = 9.80\text{ m/s}^2. If the gas is heated to a steady equilibrium temperature of 340 K340\text{ K}, calculate the vertical equilibrium height hh of the piston above the bottom of the cylinder in meters (m\text{m}). Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer and steps

Final answer

1.13 m1.13\text{ m}

Steps

01

Condition for Mechanical Equilibrium of the Piston

The piston is movable and frictionless, so at equilibrium, the net vertical force acting on it must be zero.

Two downward forces act on the piston:

  • The downward force from atmospheric pressure: Fatm=PatmAF_{\text{atm}} = P_{\text{atm}} A
  • The downward gravitational force (weight of the piston): W=MgW = M g

One upward force balances them, exerted by the enclosed gas pressure PP: Fgas=PAF_{\text{gas}} = P A

Setting the upward force equal to the total downward force: PA=PatmA+MgP A = P_{\text{atm}} A + M g

Dividing by the cross-sectional area AA gives the absolute pressure of the gas: P=Patm+MgAP = P_{\text{atm}} + \frac{M g}{A}


02

Numerical Calculation of the Gas Pressure

Substitute the given values into the expression for pressure:

  • Patm=1.013×105 PaP_{\text{atm}} = 1.013 \times 10^5\text{ Pa}
  • M=4.50 kgM = 4.50\text{ kg}
  • g=9.80 m/s2g = 9.80\text{ m/s}^2
  • A=2.50×10−3 m2A = 2.50 \times 10^{-3}\text{ m}^2

Calculate the pressure contributed by the piston's weight: MgA=4.50⋅9.802.50×10−3=44.12.50×10−3=1.764×104 Pa\frac{M g}{A} = \frac{4.50 \cdot 9.80}{2.50 \times 10^{-3}} = \frac{44.1}{2.50 \times 10^{-3}} = 1.764 \times 10^4\text{ Pa}

Thus, the total gas pressure is: P=1.013×105 Pa+0.1764×105 Pa=1.1894×105 PaP = 1.013 \times 10^5\text{ Pa} + 0.1764 \times 10^5\text{ Pa} = 1.1894 \times 10^5\text{ Pa}


03

Calculating the Equilibrium Height Using the Ideal Gas Law

For an ideal gas, the equation of state is: PV=nRTP V = n R T

The volume VV of a uniform vertical cylinder of height hh and cross-sectional area AA is: V=AhV = A h

Substitute V=AhV = A h into the ideal gas law: P(Ah)=nRT  ⟹  h=nRTPAP (A h) = n R T \implies h = \frac{n R T}{P A}

Notice that PA=PatmA+MgP A = P_{\text{atm}} A + M g: PA=(1.013×105)(2.50×10−3)+44.1=253.25+44.1=297.35 NP A = (1.013 \times 10^5)(2.50 \times 10^{-3}) + 44.1 = 253.25 + 44.1 = 297.35\text{ N}

Now, compute the thermal energy factor nRTn R T: nRT=(0.120 mol)⋅(8.314 J/(mol⋅K))⋅(340 K)≈339.21 Jn R T = (0.120\text{ mol}) \cdot (8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot (340\text{ K}) \approx 339.21\text{ J}

Solving for the vertical height hh: h=339.21 J297.35 N≈1.13 mh = \frac{339.21\text{ J}}{297.35\text{ N}} \approx 1.13\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student neglects atmospheric pressure on the exterior of the cylinder, assuming the gas pressure is balanced only by the weight of the piston.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=MgA=(4.50×9.80)(2.50×10−3)  ⟹  P=17640 PaP = \frac{M g}{A} = \frac{(4.50 \times 9.80)}{(2.50 \times 10^{-3})} \implies P = 17640\text{ Pa}

    Correct

    P=Patm+MgA=1.013×105 Pa+(4.50)(9.80)2.50×10−3 Pa=1.1894×105 PaP = P_{\text{atm}} + \frac{M g}{A} = 1.013 \times 10^5\text{ Pa} + \frac{(4.50)(9.80)}{2.50 \times 10^{-3}}\text{ Pa} = 1.1894 \times 10^5\text{ Pa}

    The exterior of the cylinder is open to the atmosphere, so atmospheric pressure exerts an additional downward force Fatm=PatmAF_{\text{atm}} = P_{\text{atm}} A on the piston. Balancing the vertical forces requires PgasA=PatmA+MgP_{\text{gas}} A = P_{\text{atm}} A + M g, meaning the absolute gas pressure is P=Patm+MgAP = P_{\text{atm}} + \frac{M g}{A}.

  2. Step 2

    V=nRTP=(0.120×8.314×340)17640  ⟹  V=0.01923 m3V = \frac{n R T}{P} = \frac{(0.120 \times 8.314 \times 340)}{17640} \implies V = 0.01923\text{ m}^3

    Correct

    V=nRTP=(0.120)(8.314)(340)1.1894×105≈2.852×10−3 m3V = \frac{n R T}{P} = \frac{(0.120)(8.314)(340)}{1.1894 \times 10^5} \approx 2.852 \times 10^{-3}\text{ m}^3

    Your algebraic manipulation of the ideal gas law PV=nRTP V = n R T was completely correct, but the calculated volume inherited the underestimated pressure from Step 1.

  3. Step 3

    h=VA=0.01923(2.50×10−3)≈7.69 mh = \frac{V}{A} = \frac{0.01923}{(2.50 \times 10^{-3})} \approx 7.69\text{ m}

    Correct

    h=VA=2.852×10−3 m32.50×10−3 m2≈1.13 mh = \frac{V}{A} = \frac{2.852 \times 10^{-3}\text{ m}^3}{2.50 \times 10^{-3}\text{ m}^2} \approx 1.13\text{ m}

    Your relationship between height, volume, and cross-sectional area was correct, but this final value is off because it carries forward the erroneous pressure.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the geometric relation V=AhV = A h to relate volume to piston height.

You correctly applied the ideal gas equation of state PV=nRTP V = n R T with the proper gas constant.

You accurately calculated the weight per unit area MgA\frac{M g}{A} of the piston.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of atmospheric pressure in force balance

You treated the gas pressure as balancing only the piston's weight, forgetting that the piston's exterior surface is exposed to the atmosphere.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating gauge pressure with absolute pressure in thermodynamic equations of state. The ideal gas law PV=nRTP V = n R T strictly requires absolute pressure, which must account for ambient atmospheric pressure on an open boundary.

REASONING PATH
Your ACEpath teacher’s suggested approach
Free-Body Diagram for Boundary Surfaces
  • For a piston exposed to the environment, the total downward force includes both gravity and atmospheric pressure: ∑Fdown=Mg+PatmA\sum F_{\text{down}} = M g + P_{\text{atm}} A.

  • Always draw a quick free-body diagram showing both the piston's weight and the environmental pressure acting across the boundary surface.

Absolute Pressure in Ideal Gas Law
  • The variable PP in PV=nRTP V = n R T is always the absolute pressure, never gauge pressure.

  • Check whether ambient atmospheric pressure must be added to obtain the total pressure inside the container.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the vertical force balance on the piston: PA=PatmA+Mg  ⟹  P=Patm+MgAP A = P_{\text{atm}} A + M g \implies P = P_{\text{atm}} + \frac{M g}{A}

  2. Calculate the total absolute pressure: P=1.013×105 Pa+(4.50 kg)(9.80 m/s2)2.50×10−3 m2=1.013×105+17640=1.1894×105 PaP = 1.013 \times 10^5\text{ Pa} + \frac{(4.50\text{ kg})(9.80\text{ m/s}^2)}{2.50 \times 10^{-3}\text{ m}^2} = 1.013 \times 10^5 + 17640 = 1.1894 \times 10^5\text{ Pa}

  3. Express height directly using V=AhV = A h: h=nRTPA=nRTPatmA+Mgh = \frac{n R T}{P A} = \frac{n R T}{P_{\text{atm}} A + M g}

  4. Substitute values: h=(0.120 mol)(8.314 J/(mol⋅K))(340 K)(1.013×105 Pa)(2.50×10−3 m2)+(4.50 kg)(9.80 m/s2)=339.21 J253.25 N+44.1 N=339.21 J297.35 N≈1.13 mh = \frac{(0.120\text{ mol})(8.314\text{ J/(mol}\cdot\text{K)})(340\text{ K})}{(1.013 \times 10^5\text{ Pa})(2.50 \times 10^{-3}\text{ m}^2) + (4.50\text{ kg})(9.80\text{ m/s}^2)} = \frac{339.21\text{ J}}{253.25\text{ N} + 44.1\text{ N}} = \frac{339.21\text{ J}}{297.35\text{ N}} \approx 1.13\text{ m}

Final answer

1.13 m1.13\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams for pistons in various orientations (vertical, inverted, and horizontal).

  • Review the distinction between gauge pressure and absolute pressure, confirming that you always input absolute pressure into PV=nRTP V = n R T.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the mass and weight of the movable piston, setting the internal gas pressure equal solely to atmospheric pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=Patm=1.013×105 PaP = P_{\text{atm}} = 1.013 \times 10^5\text{ Pa}

    Correct

    P=Patm+MgA=1.013×105 Pa+(4.50 kg)(9.80 m/s2)2.50×10−3 m2≈1.1894×105 PaP = P_{\text{atm}} + \frac{Mg}{A} = 1.013 \times 10^5\text{ Pa} + \frac{(4.50\text{ kg})(9.80\text{ m/s}^2)}{2.50 \times 10^{-3}\text{ m}^2} \approx 1.1894 \times 10^5\text{ Pa}

    Because the piston is oriented vertically and has mass MM, gravity pulls it downward. Mechanical equilibrium requires the upward gas force to balance both the downward atmospheric force and the piston's weight (PA=PatmA+MgPA = P_{\text{atm}}A + Mg).

  2. Step 2

    PV=nRT  ⟹  h=nRTPatm×APV = nRT \implies h = \frac{nRT}{P_{\text{atm}} \times A}

    Correct

    PV=nRT  ⟹  h=nRTPA=nRTPatmA+MgPV = nRT \implies h = \frac{nRT}{PA} = \frac{nRT}{P_{\text{atm}}A + Mg}

    Your algebraic rearrangement for the height of a uniform cylinder (V=AhV = Ah) is correct, but it carries forward the incomplete pressure expression.

  3. Step 3

    h=0.120×8.314×3401.013×105×2.50×10−3=339.21253.25≈1.34 mh = \frac{0.120 \times 8.314 \times 340}{1.013 \times 10^5 \times 2.50 \times 10^{-3}} = \frac{339.21}{253.25} \approx 1.34\text{ m}

    Correct

    h=0.120×8.314×340(1.013×105)(2.50×10−3)+(4.50)(9.80)=339.21 J297.35 N≈1.13 mh = \frac{0.120 \times 8.314 \times 340}{(1.013 \times 10^5)(2.50 \times 10^{-3}) + (4.50)(9.80)} = \frac{339.21\text{ J}}{297.35\text{ N}} \approx 1.13\text{ m}

    Your numerical arithmetic is accurate based on your formula, but omitting the piston's weight of 44.1 N44.1\text{ N} leads to an overestimate of the equilibrium height.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the ideal gas equation of state PV=nRTPV = nRT.

You related the volume of the vertical cylinder to its cross-sectional area and height via V=AhV = Ah.

You accurately evaluated the thermal energy term nRT≈339.21 JnRT \approx 339.21\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Piston Weight in Mechanical Equilibrium

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the gas pressure as identical to external atmospheric pressure without performing a vertical free-body force balance on the massive movable piston.

REASONING PATH
Your ACEpath teacher’s suggested approach
Movable Boundary Force Balance
  • For a movable barrier at rest, the net force must be zero: ∑Fy=0\sum F_y = 0.

  • Draw a free-body diagram of the piston identifying all forces acting along the axis of motion: gas pressure pushing out, atmospheric pressure pushing in, and gravity acting along the vertical line.

Absolute Gas Pressure in a Vertical Cylinder
  • Pgas=Pext+MgAP_{\text{gas}} = P_{\text{ext}} + \frac{Mg}{A} for a vertical cylinder with an upright piston.

  • Always add the pressure exerted by the weight of the piston, MgA\frac{Mg}{A}, to the ambient external pressure when the cylinder is vertical.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Balance the vertical forces on the piston at equilibrium: Fup=Fdown  ⟹  PA=PatmA+MgF_{\text{up}} = F_{\text{down}} \implies P A = P_{\text{atm}} A + M g.

  2. Compute the total downward force: Fdown=(1.013×105 Pa)(2.50×10−3 m2)+(4.50 kg)(9.80 m/s2)=253.25 N+44.1 N=297.35 NF_{\text{down}} = (1.013 \times 10^5\text{ Pa})(2.50 \times 10^{-3}\text{ m}^2) + (4.50\text{ kg})(9.80\text{ m/s}^2) = 253.25\text{ N} + 44.1\text{ N} = 297.35\text{ N}.

  3. Calculate the equilibrium height using h=nRTPA=339.21 J297.35 N≈1.13 mh = \frac{nRT}{PA} = \frac{339.21\text{ J}}{297.35\text{ N}} \approx 1.13\text{ m}.

Final answer

1.13 m1.13\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick free-body diagram for any piston problem before writing down the pressure value.

  • Check whether the cylinder orientation is vertical, horizontal, or inclined to determine if gravity contributes to the gas pressure.

  • Practice solving problems where additional weights or external springs act on the movable piston.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts rather than adds the pressure exerted by the piston's weight when determining the total gas pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=Patm−MgA  ⟹  P=101300−(4.50×9.80)2.50×10−3=101300−17640=83660 PaP = P_{\text{atm}} - \frac{Mg}{A} \implies P = 101300 - \frac{(4.50 \times 9.80)}{2.50 \times 10^{-3}} = 101300 - 17640 = 83660\text{ Pa}

    Correct

    P=Patm+MgA=101300+4.50×9.802.50×10−3=101300+17640=118940 PaP = P_{\text{atm}} + \frac{Mg}{A} = 101300 + \frac{4.50 \times 9.80}{2.50 \times 10^{-3}} = 101300 + 17640 = 118940\text{ Pa}

    Because the gas supports both the downward push of atmospheric pressure and the downward gravitational weight of the piston, the equilibrium condition is PA=PatmA+MgP A = P_{\text{atm}} A + Mg, meaning the gas pressure must exceed atmospheric pressure.

  2. Step 2

    h=nRTPA  ⟹  h=(0.120×8.314×340)83660×2.50×10−3  ⟹  h=339.21209.15≈1.62 mh = \frac{nRT}{PA} \implies h = \frac{(0.120 \times 8.314 \times 340)}{83660 \times 2.50 \times 10^{-3}} \implies h = \frac{339.21}{209.15} \approx 1.62\text{ m}

    Correct

    h=nRTPA=0.120×8.314×340118940×2.50×10−3=339.21297.35≈1.13 mh = \frac{nRT}{PA} = \frac{0.120 \times 8.314 \times 340}{118940 \times 2.50 \times 10^{-3}} = \frac{339.21}{297.35} \approx 1.13\text{ m}

    Your algebraic setup and substitution for the ideal gas law height were completely sound, but substituting the incorrect pressure value from Step 1 led to an inflated height.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the gas volume in terms of cross-sectional area and height as V=AhV = A h.

You correctly applied the ideal gas equation of state PV=nRTP V = n R T to isolate height hh.

You performed all intermediate arithmetic and unit conversions with great accuracy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect equilibrium force balance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the piston's weight as opposing the atmosphere rather than acting alongside the atmosphere against the enclosed gas beneath it.

REASONING PATH
Your ACEpath teacher’s suggested approach
Free-Body Diagram on the Piston
  • For a vertical cylinder with gas beneath the piston, the gas pushes upward (PAP A), while gravity (MgM g) and atmospheric pressure (PatmAP_{\text{atm}} A) both push downward.

  • Always draw a quick free-body diagram of the boundary and write ∑Fy=0\sum F_y = 0 as Fup=FdownF_{\text{up}} = F_{\text{down}} before solving for pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the mechanical equilibrium balance of vertical forces on the piston: PA=PatmA+MgP A = P_{\text{atm}} A + M g.

  2. Solve for total absolute gas pressure: P=Patm+MgA=101300 Pa+17640 Pa=118940 PaP = P_{\text{atm}} + \frac{M g}{A} = 101300\text{ Pa} + 17640\text{ Pa} = 118940\text{ Pa}.

  3. Substitute PP into your height formula: h=nRTPA=339.21 J(118940 Pa)(2.50×10−3 m2)=339.21 J297.35 N≈1.13 mh = \frac{n R T}{P A} = \frac{339.21\text{ J}}{(118940\text{ Pa})(2.50 \times 10^{-3}\text{ m}^2)} = \frac{339.21\text{ J}}{297.35\text{ N}} \approx 1.13\text{ m}.

Final answer

1.13 m1.13\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a free-body diagram showing all vertical forces whenever setting up equilibrium for movable boundaries.

  • Check your intuition: gas trapped under a heavy piston must always be at a higher pressure than the outside air to hold the piston up.

Lock it in

Similar question

01

A sample of 0.080 mol0.080\text{ mol} of an ideal gas is enclosed in a vertical cylinder with cross-sectional area A=1.60×10−3 m2A = 1.60 \times 10^{-3}\text{ m}^2 under a frictionless piston of mass M=3.20 kgM = 3.20\text{ kg}. Atmospheric pressure is 1.00×105 Pa1.00 \times 10^5\text{ Pa} and g=9.80 m/s2g = 9.80\text{ m/s}^2. If the gas is held at 300 K300\text{ K}, calculate the vertical equilibrium height hh of the piston. Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

The downward forces on the piston are Fatm=PatmA=(1.00×105)(1.60×10−3)=160 NF_{\text{atm}} = P_{\text{atm}} A = (1.00 \times 10^5)(1.60 \times 10^{-3}) = 160\text{ N} and W=Mg=(3.20)(9.80)=31.36 NW = M g = (3.20)(9.80) = 31.36\text{ N}. Total downward force is Ftotal=191.36 NF_{\text{total}} = 191.36\text{ N}. By force equilibrium, PA=Ftotal=191.36 NP A = F_{\text{total}} = 191.36\text{ N}. Since V=AhV = A h, we have h=nRTPA=(0.080)(8.314)(300)191.36=199.54191.36≈1.04 mh = \frac{n R T}{P A} = \frac{(0.080)(8.314)(300)}{191.36} = \frac{199.54}{191.36} \approx 1.04\text{ m}.

02

The same vertical cylinder and piston from the previous problem are turned upside down (inverted), such that the piston hangs at the bottom, supported only by the reduced gas pressure inside and atmospheric pressure pushing upward from below. What is the absolute pressure PP of the enclosed gas?

Answer

In the inverted orientation, the upward force is Fatm=PatmAF_{\text{atm}} = P_{\text{atm}} A, and the downward forces are the piston's weight MgM g and the gas force PAP A. Balancing forces gives PA+Mg=PatmA  ⟹  P=Patm−MgA=1.00×105 Pa−31.36 N1.60×10−3 m2=100000−19600=8.04×104 PaP A + M g = P_{\text{atm}} A \implies P = P_{\text{atm}} - \frac{M g}{A} = 1.00 \times 10^5\text{ Pa} - \frac{31.36\text{ N}}{1.60 \times 10^{-3}\text{ m}^2} = 100000 - 19600 = 8.04 \times 10^4\text{ Pa}.

03

A horizontal cylinder is fitted with a frictionless piston of area A=2.00×10−3 m2A = 2.00 \times 10^{-3}\text{ m}^2. The exterior is at Patm=1.01×105 PaP_{\text{atm}} = 1.01 \times 10^5\text{ Pa}. A horizontal spring with spring constant k=1500 N/mk = 1500\text{ N/m} is compressed by 0.040 m0.040\text{ m} against the outer face of the piston, pushing it inward. What absolute gas pressure PP is required inside the cylinder to maintain equilibrium?

Answer

In the horizontal orientation, gravity does not act along the piston's axis of motion. The forces pushing inward are atmospheric pressure force PatmAP_{\text{atm}} A and the spring force Fspring=kx=(1500)(0.040)=60 NF_{\text{spring}} = k x = (1500)(0.040) = 60\text{ N}. For equilibrium, PA=PatmA+kx  ⟹  P=Patm+kxA=1.01×105+602.00×10−3=101000+30000=1.31×105 PaP A = P_{\text{atm}} A + k x \implies P = P_{\text{atm}} + \frac{k x}{A} = 1.01 \times 10^5 + \frac{60}{2.00 \times 10^{-3}} = 101000 + 30000 = 1.31 \times 10^5\text{ Pa}.

Loading workspace…