Resources

In an undergraduate physics laboratory, students calibrate a Hall-effect magnetic field sensor using a Helmholtz coil configuration consisting of two coaxial circular coils of radius R=15.0 cmR = 15.0\text{ cm}, each having N=100N = 100 turns, separated by a distance equal to their radius (d=R=15.0 cmd = R = 15.0\text{ cm}). Both coils carry an identical current I=1.80 AI = 1.80\text{ A} in the same direction. (a) Calculate the theoretical uniform magnetic field BcenterB_{\text{center}} at the midpoint on the axis between the two coils. (b) Verify analytically that the Helmholtz geometry produces an exceptionally uniform field line density by evaluating the first derivative dBdz\frac{dB}{dz} and second derivative d2Bdz2\frac{d^2B}{dz^2} of the axial magnetic field at the midpoint z=0z = 0. (c) The Hall probe sensor has a calibrated Hall coefficient of RH=3.50×10−4 m3/CR_H = 3.50\times 10^{-4}\text{ m}^3/\text{C} and thickness t=0.120 mmt = 0.120\text{ mm} along the field line direction. When placed at the coil center and driven with a control current of Iprobe=12.0 mAI_{\text{probe}} = 12.0\text{ mA}, calculate the measured Hall potential difference ΔVH\Delta V_H in microvolts (μV\mu\text{V}).

Answer and steps

Final answer

(a) Bcenter=(45)3/2μ0NIR=1.08×10−3 TB_{\text{center}} = \left(\frac{4}{5}\right)^{3/2}\frac{\mu_0 N I}{R} = 1.08\times 10^{-3}\text{ T}; (b) Both dBdz∣z=0=0\left.\frac{dB}{dz}\right|_{z=0} = 0 (due to axial symmetry) and d2Bdz2∣z=0=0\left.\frac{d^2B}{dz^2}\right|_{z=0} = 0 (because the coil separation d=Rd = R cancels the quadratic spatial curvature), yielding uniform, parallel field lines near the midpoint; (c) ΔVH=37.8 μV\Delta V_H = 37.8\,\mu\text{V}

Steps

Part (a): Theoretical Magnetic Field at the Midpoint

The magnetic field on the central axis (zz-axis) of a single circular coil of radius RR carrying current II with NN turns, located at a distance uu from the observation point, is given by the Biot–Savart law: Bcoil(u)=μ0NIR22(R2+u2)3/2B_{\text{coil}}(u) = \frac{\mu_0 N I R^2}{2\left(R^2 + u^2\right)^{3/2}}

In a Helmholtz coil setup, two identical coaxial coils are separated by a distance d=Rd = R. At the midpoint between them, the distance to each coil is u=R2u = \frac{R}{2}. Because both coils carry current in the same direction, their magnetic fields point along the same axis and add constructively: Bcenter=2⋅Bcoil(R2)=2⋅μ0NIR22(R2+(R2)2)3/2B_{\text{center}} = 2 \cdot B_{\text{coil}}\left(\frac{R}{2}\right) = 2 \cdot \frac{\mu_0 N I R^2}{2\left(R^2 + \left(\frac{R}{2}\right)^2\right)^{3/2}}

Simplify the denominator: R2+(R2)2=R2+R24=54R2R^2 + \left(\frac{R}{2}\right)^2 = R^2 + \frac{R^2}{4} = \frac{5}{4}R^2

Substituting this back gives: Bcenter=μ0NIR2(54R2)3/2=μ0NIR2(54)3/2R3=(45)3/2μ0NIRB_{\text{center}} = \frac{\mu_0 N I R^2}{\left(\frac{5}{4}R^2\right)^{3/2}} = \frac{\mu_0 N I R^2}{\left(\frac{5}{4}\right)^{3/2} R^3} = \left(\frac{4}{5}\right)^{3/2} \frac{\mu_0 N I}{R}

Substitute the given values (N=100N = 100, I=1.80 AI = 1.80\text{ A}, R=0.150 mR = 0.150\text{ m}, and μ0=4π×10−7 T⋅m/A\mu_0 = 4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}): Bcenter=(0.8)3/2⋅(4π×10−7 T⋅m/A)(100)(1.80 A)0.150 mB_{\text{center}} = (0.8)^{3/2} \cdot \frac{(4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(100)(1.80\text{ A})}{0.150\text{ m}} Bcenter≈0.71554⋅2.2619×10−4 T⋅m0.150 m≈1.08×10−3 TB_{\text{center}} \approx 0.71554 \cdot \frac{2.2619 \times 10^{-4}\text{ T}\cdot\text{m}}{0.150\text{ m}} \approx 1.08 \times 10^{-3}\text{ T}


Part (b): Analytical Verification of Field Uniformity

Let the midpoint between the two coils be chosen as the origin z=0z = 0. The two coils are positioned at z1=−R2z_1 = -\frac{R}{2} and z2=+R2z_2 = +\frac{R}{2}. The total magnetic field at any axial coordinate zz is: B(z)=μ0NIR22[(R2+(z−R2)2)−3/2+(R2+(z+R2)2)−3/2]B(z) = \frac{\mu_0 N I R^2}{2} \left[ \left(R^2 + \left(z - \frac{R}{2}\right)^2\right)^{-3/2} + \left(R^2 + \left(z + \frac{R}{2}\right)^2\right)^{-3/2} \right]

Define the single-coil axial function f(u)=(R2+u2)−3/2f(u) = (R^2 + u^2)^{-3/2}, so: B(z)=μ0NIR22[f(z−R2)+f(z+R2)]B(z) = \frac{\mu_0 N I R^2}{2} \left[ f\left(z - \frac{R}{2}\right) + f\left(z + \frac{R}{2}\right) \right]

  1. First Derivative (dBdz\frac{dB}{dz}): Taking the first derivative with respect to zz: dBdz=μ0NIR22[f′(z−R2)+f′(z+R2)]\frac{dB}{dz} = \frac{\mu_0 N I R^2}{2} \left[ f'\left(z - \frac{R}{2}\right) + f'\left(z + \frac{R}{2}\right) \right] where f′(u)=−3u(R2+u2)−5/2f'(u) = -3u(R^2 + u^2)^{-5/2}. Evaluating at z=0z = 0: dBdz∣z=0=μ0NIR22[f′(−R2)+f′(R2)]\left.\frac{dB}{dz}\right|_{z=0} = \frac{\mu_0 N I R^2}{2} \left[ f'\left(-\frac{R}{2}\right) + f'\left(\frac{R}{2}\right) \right] Since f′(u)f'(u) is an odd function (f′(−u)=−f′(u)f'(-u) = -f'(u)), the terms cancel exactly: dBdz∣z=0=0\left.\frac{dB}{dz}\right|_{z=0} = 0
  2. Second Derivative (d2Bdz2\frac{d^2B}{dz^2}): Taking the second derivative: d2Bdz2=μ0NIR22[f′′(z−R2)+f′′(z+R2)]\frac{d^2B}{dz^2} = \frac{\mu_0 N I R^2}{2} \left[ f''\left(z - \frac{R}{2}\right) + f''\left(z + \frac{R}{2}\right) \right] Compute f′′(u)f''(u) by the product rule: f′′(u)=ddu[−3u(R2+u2)−5/2]=−3(R2+u2)−5/2+15u2(R2+u2)−7/2f''(u) = \frac{d}{du}\left[-3u(R^2 + u^2)^{-5/2}\right] = -3(R^2 + u^2)^{-5/2} + 15u^2(R^2 + u^2)^{-7/2} f′′(u)=3(R2+u2)−7/2[5u2−(R2+u2)]=3(R2+u2)−7/2(4u2−R2)f''(u) = 3(R^2 + u^2)^{-7/2} \left[ 5u^2 - (R^2 + u^2) \right] = 3(R^2 + u^2)^{-7/2} \left(4u^2 - R^2\right) Evaluating at z=0z = 0, where u=±R2u = \pm \frac{R}{2}: 4u2−R2=4(R2)2−R2=R2−R2=04u^2 - R^2 = 4\left(\frac{R}{2}\right)^2 - R^2 = R^2 - R^2 = 0 Therefore, f′′(±R2)=0f''\left(\pm \frac{R}{2}\right) = 0, which yields: d2Bdz2∣z=0=0\left.\frac{d^2B}{dz^2}\right|_{z=0} = 0

Because both the first and second spatial derivatives vanish at the center, the leading non-zero variation in the Taylor series expansion is of order z4z^4, ensuring a remarkably constant magnetic field and nearly parallel field lines throughout the central region.


Part (c): Measured Hall Potential Difference

The Hall potential difference ΔVH\Delta V_H across a conductor of thickness tt parallel to the magnetic field is given by: ΔVH=RH⋅Iprobe⋅Bt\Delta V_H = \frac{R_H \cdot I_{\text{probe}} \cdot B}{t}

Substitute the given parameters:

  • RH=3.50×10−4 m3/CR_H = 3.50 \times 10^{-4}\text{ m}^3/\text{C}
  • Iprobe=12.0 mA=1.20×10−2 AI_{\text{probe}} = 12.0\text{ mA} = 1.20 \times 10^{-2}\text{ A}
  • B=Bcenter≈1.079×10−3 TB = B_{\text{center}} \approx 1.079 \times 10^{-3}\text{ T}
  • t=0.120 mm=1.20×10−4 mt = 0.120\text{ mm} = 1.20 \times 10^{-4}\text{ m}

ΔVH=(3.50×10−4 m3/C)⋅(1.20×10−2 A)⋅(1.079×10−3 T)1.20×10−4 m\Delta V_H = \frac{(3.50 \times 10^{-4}\text{ m}^3/\text{C}) \cdot (1.20 \times 10^{-2}\text{ A}) \cdot (1.079 \times 10^{-3}\text{ T})}{1.20 \times 10^{-4}\text{ m}} ΔVH=(3.50×10−4)⋅100⋅(1.079×10−3) V=3.50×10−2⋅1.079×10−3 V\Delta V_H = (3.50 \times 10^{-4}) \cdot 100 \cdot (1.079 \times 10^{-3})\text{ V} = 3.50 \times 10^{-2} \cdot 1.079 \times 10^{-3}\text{ V} ΔVH≈3.78×10−5 V=37.8 μV\Delta V_H \approx 3.78 \times 10^{-5}\text{ V} = 37.8\,\mu\text{V}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the magnetic field from only a single circular coil at its center or forgets to double the contribution for the two identical coils, halving the resulting field and Hall voltage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Bcenter=μ0NIR22(R2+(R/2)2)3/2  ⟹  Bcenter=12(45)3/2μ0NIR  ⟹  Bcenter=5.40×10−4 TB_{\text{center}} = \frac{\mu_0 N I R^2}{2 (R^2 + (R/2)^2)^{3/2}} \implies B_{\text{center}} = \frac{1}{2}\left(\frac{4}{5}\right)^{3/2}\frac{\mu_0 N I}{R} \implies B_{\text{center}} = 5.40 \times 10^{-4}\text{ T}

    Correct

    Bcenter=2⋅μ0NIR22(R2+(R/2)2)3/2=(45)3/2μ0NIR≈1.08×10−3 TB_{\text{center}} = 2 \cdot \frac{\mu_0 N I R^2}{2 (R^2 + (R/2)^2)^{3/2}} = \left(\frac{4}{5}\right)^{3/2}\frac{\mu_0 N I}{R} \approx 1.08 \times 10^{-3}\text{ T}

    You used the axial field formula for only one coil at distance z=R/2z = R/2. A Helmholtz pair consists of two coaxial coils with currents in the same direction, so their fields add constructively at the midpoint, doubling the result.

  2. Step 2

    B(z)=μ0NIR22[(R2+(z−R/2)2)−3/2+(R2+(z+R/2)2)−3/2]  ⟹  dBdz∣z=0=0  ⟹  d2Bdz2∣z=0=0B(z) = \frac{\mu_0 N I R^2}{2}\left[\left(R^2 + (z - R/2)^2\right)^{-3/2} + \left(R^2 + (z + R/2)^2\right)^{-3/2}\right] \implies \left.\frac{dB}{dz}\right|_{z=0} = 0 \implies \left.\frac{d^2B}{dz^2}\right|_{z=0} = 0

  3. Step 3

    ΔVH=RHIprobeBt=(3.50×10−4)(12.0×10−3)(5.40×10−4)1.20×10−4=1.89×10−5 V=18.9 μV\Delta V_H = \frac{R_H I_{\text{probe}} B}{t} = \frac{(3.50 \times 10^{-4})(12.0 \times 10^{-3})(5.40 \times 10^{-4})}{1.20 \times 10^{-4}} = 1.89 \times 10^{-5}\text{ V} = 18.9\,\mu\text{V}

    Correct

    ΔVH=RHIprobeBcentert=(3.50×10−4)(1.20×10−2)(1.08×10−3)1.20×10−4=37.8 μV\Delta V_H = \frac{R_H I_{\text{probe}} B_{\text{center}}}{t} = \frac{(3.50 \times 10^{-4})(1.20 \times 10^{-2})(1.08 \times 10^{-3})}{1.20 \times 10^{-4}} = 37.8\,\mu\text{V}

    You applied the Hall potential formula and converted units correctly, but your numerical answer was halved because you carried over the single-coil field value from Part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and differentiated the axial magnetic field expression for two coils in Part (b).

You correctly verified that the first and second spatial derivatives vanish at the center.

You used the correct relationship between Hall potential, Hall coefficient, control current, field strength, and sensor thickness.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Superposition Factor

You set up the total field for both coils in Part (b), but in Part (a) you evaluated the field of only one coil without multiplying by 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the principle of superposition when computing the central field magnitude, treating the midpoint as if it received a field contribution from only one of the two coils.

REASONING PATH
Your ACEpath teacher’s suggested approach
Superposition in Multi-Coil Systems
  • For MM identical coaxial coils carrying current in the same sense, the net field at a symmetric midpoint is Btotal=∑k=1MBkB_{\text{total}} = \sum_{k=1}^M B_k. For a Helmholtz pair, Bcenter=2Bsingle(R/2)B_{\text{center}} = 2 B_{\text{single}}(R/2).

  • Before evaluating numerical values, write Btotal=B1+B2=2B1B_{\text{total}} = B_1 + B_2 = 2 B_1 explicitly to ensure both sources are accounted for.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include both coils at z=0z = 0: Bcenter=2⋅μ0NIR22(R2+(R/2)2)3/2=(45)3/2μ0NIRB_{\text{center}} = 2 \cdot \frac{\mu_0 N I R^2}{2(R^2 + (R/2)^2)^{3/2}} = \left(\frac{4}{5}\right)^{3/2} \frac{\mu_0 N I}{R}.

  2. Substitute numerical values: Bcenter=(0.8)3/2(4π×10−7 T⋅m/A)(100)(1.80 A)0.150 m≈1.08×10−3 TB_{\text{center}} = (0.8)^{3/2} \frac{(4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(100)(1.80\text{ A})}{0.150\text{ m}} \approx 1.08 \times 10^{-3}\text{ T}.

  3. Recalculate Hall potential with the full field: ΔVH=(3.50×10−4 m3/C)(1.20×10−2 A)(1.08×10−3 T)1.20×10−4 m=37.8 μV\Delta V_H = \frac{(3.50 \times 10^{-4}\text{ m}^3/\text{C})(1.20 \times 10^{-2}\text{ A})(1.08 \times 10^{-3}\text{ T})}{1.20 \times 10^{-4}\text{ m}} = 37.8\,\mu\text{V}.

Final answer

(a) Bcenter=1.08×10−3 TB_{\text{center}} = 1.08 \times 10^{-3}\text{ T}; (b) dBdz∣z=0=0\left.\frac{dB}{dz}\right|_{z=0} = 0 and d2Bdz2∣z=0=0\left.\frac{d^2B}{dz^2}\right|_{z=0} = 0; (c) ΔVH=37.8 μV\Delta V_H = 37.8\,\mu\text{V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the superposition sum Bnet=B1+B2B_{\text{net}} = B_1 + B_2 at the start of any multi-coil problem.

  • Cross-check intermediate results with the algebraic forms you set up in later parts of the same problem.

OverviewACEpath Teacher's Diagnosis

02 The student uses the coil separation distance d instead of the distance to the midpoint d/2 = R/2 when evaluating the axial distance from each coil.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Bcenter=2⋅(μ0NIR22(R2+R2)3/2)=μ0NI23/2R=(4π×10−7)(100)(1.80)2.828×0.150=5.33×10−4 TB_{\text{center}} = 2 \cdot \left(\frac{\mu_0 N I R^2}{2(R^2 + R^2)^{3/2}}\right) = \frac{\mu_0 N I}{2^{3/2}R} = \frac{(4\pi \times 10^{-7})(100)(1.80)}{2.828 \times 0.150} = 5.33 \times 10^{-4}\text{ T}

    Correct

    Bcenter=2⋅μ0NIR22(R2+(R2)2)3/2=(45)3/2μ0NIR≈1.08×10−3 TB_{\text{center}} = 2 \cdot \frac{\mu_0 N I R^2}{2\left(R^2 + \left(\frac{R}{2}\right)^2\right)^{3/2}} = \left(\frac{4}{5}\right)^{3/2}\frac{\mu_0 N I}{R} \approx 1.08 \times 10^{-3}\text{ T}

    You substituted the full coil separation d=Rd = R into the denominator term (R2+u2)3/2(R^2 + u^2)^{3/2} instead of the distance from either coil to the midpoint, which is u=d2=R2u = \frac{d}{2} = \frac{R}{2}.

  2. Step 2

    B(z)=(μ0NIR22)[(R2+(z−R2)2)−3/2+(R2+(z+R2)2)−3/2]  ⟹  dBdz∣z=0=0 by symmetry  ⟹  d2Bdz2∣z=0=−3(54R2)−5/2+15(R2)2(54R2)−7/2=0B(z) = \left(\frac{\mu_0 N I R^2}{2}\right)\left[\left(R^2 + \left(z - \frac{R}{2}\right)^2\right)^{-3/2} + \left(R^2 + \left(z + \frac{R}{2}\right)^2\right)^{-3/2}\right] \implies \left.\frac{dB}{dz}\right|_{z=0} = 0 \text{ by symmetry} \implies \left.\frac{d^2B}{dz^2}\right|_{z=0} = -3\left(\frac{5}{4}R^2\right)^{-5/2} + 15\left(\frac{R}{2}\right)^2\left(\frac{5}{4}R^2\right)^{-7/2} = 0

  3. Step 3

    ΔVH=RHIprobeBt=(3.50×10−4)(12.0×10−3)(5.33×10−4)1.20×10−4=1.87×10−5 V=18.7 μV\Delta V_H = \frac{R_H I_{\text{probe}} B}{t} = \frac{(3.50 \times 10^{-4})(12.0 \times 10^{-3})(5.33 \times 10^{-4})}{1.20 \times 10^{-4}} = 1.87 \times 10^{-5}\text{ V} = 18.7\,\mu\text{V}

    Correct

    ΔVH=(3.50×10−4 m3/C)(1.20×10−2 A)(1.08×10−3 T)1.20×10−4 m≈37.8 μV\Delta V_H = \frac{(3.50 \times 10^{-4}\text{ m}^3/\text{C})(1.20 \times 10^{-2}\text{ A})(1.08 \times 10^{-3}\text{ T})}{1.20 \times 10^{-4}\text{ m}} \approx 37.8\,\mu\text{V}

    Your Hall voltage equation and unit conversions are completely correct, but your final answer is lower than expected because it uses the field value from part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the principle of superposition to sum the magnetic fields of the two coaxial coils.

You performed an accurate derivative check in part (b) demonstrating why Helmholtz coils produce a uniform central field.

You correctly applied the Hall effect relation ΔVH=RHIBt\Delta V_H = \frac{R_H I B}{t} with proper metric conversions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distance to Midpoint vs. Total Separation

You wrote R2+R2R^2 + R^2 in the denominator of part (a), treating the distance from each coil to the center as RR rather than R2\frac{R}{2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total coil separation distance d=Rd = R with the axial coordinate distance from a single coil to the midpoint u=d2=R2u = \frac{d}{2} = \frac{R}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Locate the Observation Point Relative to Each Source
  • For a coil located at z0z_0, the axial distance in the Biot–Savart formula is u=∣z−z0∣u = |z - z_0|.

  • Always sketch the axis and mark the source position and field evaluation point before writing (R2+u2)3/2(R^2 + u^2)^{3/2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the axial distance from each coil to the midpoint: u=d2=R2u = \frac{d}{2} = \frac{R}{2}.

  2. Evaluate the denominator term: R2+u2=R2+(R2)2=54R2R^2 + u^2 = R^2 + \left(\frac{R}{2}\right)^2 = \frac{5}{4}R^2.

  3. Calculate Bcenter=2⋅μ0NIR22(54R2)3/2=(45)3/2μ0NIR≈1.08×10−3 TB_{\text{center}} = 2 \cdot \frac{\mu_0 N I R^2}{2\left(\frac{5}{4}R^2\right)^{3/2}} = \left(\frac{4}{5}\right)^{3/2}\frac{\mu_0 N I}{R} \approx 1.08 \times 10^{-3}\text{ T}.

  4. Recalculate the Hall voltage: ΔVH=(3.50×10−4)(1.20×10−2)(1.08×10−3)1.20×10−4=3.78×10−5 V=37.8 μV\Delta V_H = \frac{(3.50 \times 10^{-4})(1.20 \times 10^{-2})(1.08 \times 10^{-3})}{1.20 \times 10^{-4}} = 3.78 \times 10^{-5}\text{ V} = 37.8\,\mu\text{V}.

Final answer

(a) Bcenter=1.08×10−3 TB_{\text{center}} = 1.08 \times 10^{-3}\text{ T}; (b) dBdz∣z=0=0\left.\frac{dB}{dz}\right|_{z=0} = 0 and d2Bdz2∣z=0=0\left.\frac{d^2B}{dz^2}\right|_{z=0} = 0; (c) ΔVH=37.8 μV\Delta V_H = 37.8\,\mu\text{V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometry of two-coil configurations to distinguish between coil separation dd and distance-to-center d/2d/2.

  • Practice substituting algebraic midpoint coordinates into multi-source field formulas before plugging in numbers.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the Hall potential formula as ΔV_H = R_H * I_probe * B * t instead of dividing by the thickness t.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Bcenter=(45)3/2μ0NIR  ⟹  Bcenter=0.7155(4π⋅10−7⋅100⋅1.800.150)  ⟹  Bcenter=1.08⋅10−3 TB_{\text{center}} = \left(\frac{4}{5}\right)^{3/2} \frac{\mu_0 N I}{R} \implies B_{\text{center}} = 0.7155 \left(\frac{4\pi \cdot 10^{-7} \cdot 100 \cdot 1.80}{0.150}\right) \implies B_{\text{center}} = 1.08 \cdot 10^{-3}\text{ T}

  2. Step 2

    B(z)=μ0NIR22[(R2+(z−R2)2)−3/2+(R2+(z+R2)2)−3/2]  ⟹  dBdz∣z=0=0 by symmetry  ⟹  d2Bdz2∣z=0 gives (54R2)−7/2[−154R2+154R2]=0B(z) = \frac{\mu_0 N I R^2}{2} \left[\left(R^2 + \left(z - \frac{R}{2}\right)^2\right)^{-3/2} + \left(R^2 + \left(z + \frac{R}{2}\right)^2\right)^{-3/2}\right] \implies \left.\frac{dB}{dz}\right|_{z=0} = 0 \text{ by symmetry} \implies \left.\frac{d^2B}{dz^2}\right|_{z=0} \text{ gives } \left(\frac{5}{4}R^2\right)^{-7/2} \left[-\frac{15}{4}R^2 + \frac{15}{4}R^2\right] = 0

  3. Step 3

    ΔVH=RHIprobeBt  ⟹  t=0.120⋅10−3 m  ⟹  ΔVH=3.50⋅10−4⋅12.0⋅10−3⋅1.08⋅10−3⋅1.20⋅10−4=5.44⋅10−13 V=5.44⋅10−7 μV\Delta V_H = R_H I_{\text{probe}} B t \implies t = 0.120 \cdot 10^{-3}\text{ m} \implies \Delta V_H = 3.50 \cdot 10^{-4} \cdot 12.0 \cdot 10^{-3} \cdot 1.08 \cdot 10^{-3} \cdot 1.20 \cdot 10^{-4} = 5.44 \cdot 10^{-13}\text{ V} = 5.44 \cdot 10^{-7}\,\mu\text{V}

    Correct

    ΔVH=RHIprobeBt=(3.50×10−4 m3/C)(12.0×10−3 A)(1.08×10−3 T)1.20×10−4 m≈37.8 μV\Delta V_H = \frac{R_H I_{\text{probe}} B}{t} = \frac{(3.50 \times 10^{-4}\text{ m}^3/\text{C})(12.0 \times 10^{-3}\text{ A})(1.08 \times 10^{-3}\text{ T})}{1.20 \times 10^{-4}\text{ m}} \approx 37.8\,\mu\text{V}

    You multiplied by the thickness tt rather than dividing by it. In the Hall effect, the current density is J=IwtJ = \frac{I}{w t}, and the transverse electric field is EH=RHJB=RHIBwtE_H = R_H J B = \frac{R_H I B}{w t}. Multiplying EHE_H by the probe width ww gives ΔVH=EHw=RHIBt\Delta V_H = E_H w = \frac{R_H I B}{t}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the Helmholtz coil formula to compute the central magnetic field.

You verified that both the first and second spatial derivatives vanish at the coil midpoint.

You correctly converted all numerical units, including milliamperes, millimeters, and centimeters, into SI units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Hall Voltage Thickness Inversion

In part (c), you placed the thickness tt in the numerator instead of the denominator of the Hall potential difference formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on a misremembered product form of the Hall effect equation instead of deriving it from the microscopic Lorentz force balance, where current density J=IA=IwtJ = \frac{I}{A} = \frac{I}{w t} puts thickness tt inversely proportional to the transverse Hall voltage.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Microscopic Check of Hall Voltage
  • Balancing the electric force qEHq E_H and magnetic Lorentz force qvdBq v_d B yields EH=vdBE_H = v_d B. With I=nqvd(wt)I = n q v_d (w t) and RH=1nqR_H = \frac{1}{n q}, the transverse potential across width ww is ΔVH=EHw=RHIBt\Delta V_H = E_H w = \frac{R_H I B}{t}.

  • Always verify dimensions or re-derive from EH=vdBE_H = v_d B: thinner samples experience higher drift velocity for a given total current, producing a larger Hall voltage.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct relationship for the Hall voltage: ΔVH=RHIprobeBt\Delta V_H = \frac{R_H I_{\text{probe}} B}{t}.

  2. Substitute the values: RH=3.50×10−4 m3/CR_H = 3.50 \times 10^{-4}\text{ m}^3/\text{C}, Iprobe=1.20×10−2 AI_{\text{probe}} = 1.20 \times 10^{-2}\text{ A}, B=1.08×10−3 TB = 1.08 \times 10^{-3}\text{ T}, and t=1.20×10−4 mt = 1.20 \times 10^{-4}\text{ m}.

  3. Evaluate the ratio: ΔVH=(3.50×10−4)(1.20×10−2)(1.08×10−3)1.20×10−4=3.78×10−5 V=37.8 μV\Delta V_H = \frac{(3.50 \times 10^{-4})(1.20 \times 10^{-2})(1.08 \times 10^{-3})}{1.20 \times 10^{-4}} = 3.78 \times 10^{-5}\text{ V} = 37.8\,\mu\text{V}.

Final answer

(a) Bcenter=1.08×10−3 TB_{\text{center}} = 1.08\times 10^{-3}\text{ T}; (b) dBdz∣z=0=0\left.\frac{dB}{dz}\right|_{z=0} = 0 and d2Bdz2∣z=0=0\left.\frac{d^2B}{dz^2}\right|_{z=0} = 0; (c) ΔVH=37.8 μV\Delta V_H = 37.8\,\mu\text{V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the microscopic origin of the Hall effect to keep the placement of sample dimensions clear.

  • Practice re-deriving ΔVH=IBnqt\Delta V_H = \frac{I B}{n q t} from drift velocity and charge carrier conservation.

  • Check units dimensionally before calculating: with [RH]=m3/C[R_H] = \text{m}^3/\text{C}, [RH][I][B][t]=(m3/C)(A)(T)m=V\frac{[R_H][I][B]}{[t]} = \frac{(\text{m}^3/\text{C})(\text{A})(\text{T})}{\text{m}} = \text{V}.

Lock it in

Similar question

01

A pair of Helmholtz coils with radius R=10.0 cmR = 10.0\text{ cm} and N=50N = 50 turns each carries a current of I=2.50 AI = 2.50\text{ A} in the same direction. Calculate the magnetic field at the midpoint between them.

Answer

Bcenter=(45)3/2μ0NIR=(0.8)3/2(4π×10−7)(50)(2.50)0.100≈1.12×10−3 TB_{\text{center}} = \left(\frac{4}{5}\right)^{3/2} \frac{\mu_0 N I}{R} = (0.8)^{3/2} \frac{(4\pi \times 10^{-7})(50)(2.50)}{0.100} \approx 1.12 \times 10^{-3}\text{ T} (or 1.12 mT1.12\text{ mT}).

02

In an anti-Helmholtz coil configuration, the currents in the two identical coaxial coils flow in opposite directions. Find the theoretical magnetic field BB and the first derivative dBdz\frac{dB}{dz} at the midpoint z=0z = 0.

Answer

At z=0z = 0, B(0)=B1(R/2)−B2(R/2)=0B(0) = B_1(R/2) - B_2(R/2) = 0. For the derivative, the fields of both coils decrease as one moves toward one coil and away from the other, adding constructively: dBdz∣z=0=2dB1dz∣z=R/2=−3μ0NIR2(R/2)(R2+R2/4)5/2=−(45)5/23μ0NI2R2≠0\left.\frac{dB}{dz}\right|_{z=0} = 2 \left.\frac{dB_1}{dz}\right|_{z=R/2} = -\frac{3 \mu_0 N I R^2 (R/2)}{(R^2 + R^2/4)^{5/2}} = -\left(\frac{4}{5}\right)^{5/2} \frac{3 \mu_0 N I}{2 R^2} \neq 0.

03

A Hall sensor with thickness t=0.200 mmt = 0.200\text{ mm} and Hall coefficient RH=2.00×10−4 m3/CR_H = 2.00 \times 10^{-4}\text{ m}^3/\text{C} is placed at the center of a Helmholtz pair. When driven with a current Iprobe=10.0 mAI_{\text{probe}} = 10.0\text{ mA}, it measures ΔVH=15.0 μV\Delta V_H = 15.0\,\mu\text{V}. Determine the current IcoilI_{\text{coil}} passing through the Helmholtz coils if N=200N = 200 turns and R=0.250 mR = 0.250\text{ m}.

Answer

First find the field: B=ΔVH⋅tRHIprobe=(1.50×10−5)(2.00×10−4)(2.00×10−4)(1.00×10−2)=1.50×10−3 TB = \frac{\Delta V_H \cdot t}{R_H I_{\text{probe}}} = \frac{(1.50 \times 10^{-5})(2.00 \times 10^{-4})}{(2.00 \times 10^{-4})(1.00 \times 10^{-2})} = 1.50 \times 10^{-3}\text{ T}. Then use B=(45)3/2μ0NIcoilRB = \left(\frac{4}{5}\right)^{3/2} \frac{\mu_0 N I_{\text{coil}}}{R}: Icoil=B⋅R(0.8)3/2μ0N=(1.50×10−3)(0.250)(0.71554)(4π×10−7)(200)≈2.09 AI_{\text{coil}} = \frac{B \cdot R}{(0.8)^{3/2} \mu_0 N} = \frac{(1.50 \times 10^{-3})(0.250)}{(0.71554)(4\pi \times 10^{-7})(200)} \approx 2.09\text{ A}.

Loading workspace…