Resources

A physics laboratory cart moves along a calibrated one-dimensional horizontal track aligned with the xx-axis. At time t0=0 st_0 = 0\text{ s}, the cart is located at an initial position of x0=+1.80 mx_0 = +1.80\text{ m}. It travels forward to x1=+7.40 mx_1 = +7.40\text{ m} over a time interval of 4.00 s4.00\text{ s}, immediately reverses direction, and rolls backward to x2=+3.20 mx_2 = +3.20\text{ m} over an additional 3.00 s3.00\text{ s}. For the entire 7.00 s7.00\text{ s} motion, calculate: (a) the final position of the cart, (b) the total displacement Δx\Delta x, and (c) the total distance dd traveled.

Answer and steps

Final answer

(a) Final position: x2=+3.20 mx_2 = +3.20\text{ m}; (b) Total displacement: Δx=+1.40 m\Delta x = +1.40\text{ m}; (c) Total distance traveled: d=9.80 md = 9.80\text{ m}.

Steps

01

Identify the Final Position

In one-dimensional kinematics, position (xx) is a coordinate that specifies the exact location of an object relative to a chosen reference point (the origin, x=0x = 0) at a specific instant in time.

The cart begins at x0=+1.80 mx_0 = +1.80\text{ m}, travels to x1=+7.40 mx_1 = +7.40\text{ m}, and finally stops at x2=+3.20 mx_2 = +3.20\text{ m} at the end of the total 7.00 s7.00\text{ s} interval.

Therefore, the final position is simply the coordinate at the end of the motion: xfinal=x2=+3.20 mx_{\text{final}} = x_2 = +3.20\text{ m}


02

Calculate the Total Displacement

Displacement (Δx\Delta x) is a vector quantity defined as the straight-line change in position from the initial point to the final point: Δx=xfinal−xinitial\Delta x = x_{\text{final}} - x_{\text{initial}}

Displacement depends solely on the start and endpoints, regardless of the path taken between them: Δx=x2−x0\Delta x = x_2 - x_0 Δx=+3.20 m−(+1.80 m)=+1.40 m\Delta x = +3.20\text{ m} - (+1.80\text{ m}) = +1.40\text{ m}

The positive sign indicates that the overall net change in position is in the positive xx-direction.


03

Calculate the Total Distance Traveled

Distance (dd) is a scalar quantity representing the total length of the actual path traversed by the object. Because distance is scalar, it accumulates continuously and can never be negative.

We break the motion into two distinct segments:

  1. Segment 1 (Forward motion from x0x_0 to x1x_1): d1=∣x1−x0∣=∣+7.40 m−(+1.80 m)∣=5.60 md_1 = |x_1 - x_0| = |+7.40\text{ m} - (+1.80\text{ m})| = 5.60\text{ m}
  2. Segment 2 (Backward motion from x1x_1 to x2x_2): d2=∣x2−x1∣=∣+3.20 m−(+7.40 m)∣=∣−4.20 m∣=4.20 md_2 = |x_2 - x_1| = |+3.20\text{ m} - (+7.40\text{ m})| = |-4.20\text{ m}| = 4.20\text{ m}

Sum the magnitudes of each segment to find the total distance: d=d1+d2=5.60 m+4.20 m=9.80 md = d_1 + d_2 = 5.60\text{ m} + 4.20\text{ m} = 9.80\text{ m}


Pitfall to Avoid

A common error is confusing distance with the magnitude of displacement. Whenever an object reverses direction, the total distance traveled is strictly greater than the magnitude of displacement (d>∣Δx∣d > |\Delta x|). Displacement subtracts opposing directions (+5.60 m−4.20 m=+1.40 m+5.60\text{ m} - 4.20\text{ m} = +1.40\text{ m}), whereas distance adds them (5.60 m+4.20 m=9.80 m5.60\text{ m} + 4.20\text{ m} = 9.80\text{ m}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses displacement with distance by taking the absolute difference between initial and final positions for total distance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xfinal=+3.20 mx_{\text{final}} = +3.20\text{ m}

  2. Step 2

    Δx=3.20 m−1.80 m=+1.40 m\Delta x = 3.20\text{ m} - 1.80\text{ m} = +1.40\text{ m}

  3. Step 3

    d=∣3.20 m−1.80 m∣  ⟹  d=1.40 md = |3.20\text{ m} - 1.80\text{ m}| \implies d = 1.40\text{ m}

    Correct

    d=∣x1−x0∣+∣x2−x1∣=∣7.40 m−1.80 m∣+∣3.20 m−7.40 m∣=5.60 m+4.20 m=9.80 md = |x_1 - x_0| + |x_2 - x_1| = |7.40\text{ m} - 1.80\text{ m}| + |3.20\text{ m} - 7.40\text{ m}| = 5.60\text{ m} + 4.20\text{ m} = 9.80\text{ m}

    You evaluated distance as d=∣Δx∣d = |\Delta x|, which measures only the net separation between start and end. Because the cart reversed direction at x1=+7.40 mx_1 = +7.40\text{ m}, you must sum the absolute distance traveled forward and backward separately.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the cart's coordinate at the end of the motion as the final position.

You calculated the net displacement accurately by subtracting the initial position from the final position.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating Distance with Magnitude of Displacement

You set distance equal to the absolute value of total displacement ∣xfinal−xinitial∣|x_{\text{final}} - x_{\text{initial}}| instead of adding the forward and backward path lengths.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the scalar path length (distance) with the magnitude of the displacement vector. Distance accumulates along every segment of motion regardless of direction, whereas displacement depends solely on the endpoints and cancels out when motion reverses.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for Reversals of Direction
  • Total distance equals ∣Δx∣|\Delta x| only when an object moves in a single direction without turning around.

  • Inspect the motion for turning points; if direction changes, split the trajectory into one-way intervals and add their absolute lengths: d=∑∣Δxi∣d = \sum |\Delta x_i|.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. d1=∣x1−x0∣=∣+7.40 m−(+1.80 m)∣=5.60 md_1 = |x_1 - x_0| = |+7.40\text{ m} - (+1.80\text{ m})| = 5.60\text{ m}

  2. d2=∣x2−x1∣=∣+3.20 m−(+7.40 m)∣=4.20 md_2 = |x_2 - x_1| = |+3.20\text{ m} - (+7.40\text{ m})| = 4.20\text{ m}

  3. d=d1+d2=5.60 m+4.20 m=9.80 md = d_1 + d_2 = 5.60\text{ m} + 4.20\text{ m} = 9.80\text{ m}

Final answer

(a) xfinal=+3.20 mx_{\text{final}} = +3.20\text{ m}; (b) Δx=+1.40 m\Delta x = +1.40\text{ m}; (c) d=9.80 md = 9.80\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick number-line sketch of the motion showing each leg with arrows.

  • Label each forward and backward leg with its positive scalar length.

  • Add all leg lengths together whenever you are asked for total distance.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the order of subtraction when calculating displacement, computing initial minus final position instead of final minus initial position.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xfinal=+3.20 mx_{\text{final}} = +3.20\text{ m}

  2. Step 2

    Δx=x0−x2  ⟹  Δx=1.80 m−3.20 m=−1.40 m\Delta x = x_0 - x_2 \implies \Delta x = 1.80\text{ m} - 3.20\text{ m} = -1.40\text{ m}

    Correct

    Δx=x2−x0=+3.20 m−(+1.80 m)=+1.40 m\Delta x = x_2 - x_0 = +3.20\text{ m} - (+1.80\text{ m}) = +1.40\text{ m}

    Displacement is defined as the change in position, Δx=xfinal−xinitial\Delta x = x_{\text{final}} - x_{\text{initial}}. You subtracted the final position from the initial position (x0−x2x_0 - x_2), which inverted the sign of the displacement vector.

  3. Step 3

    d1=7.40 m−1.80 m=5.60 m  ⟹  d2=∣3.20 m−7.40 m∣=4.20 m  ⟹  d=5.60 m+4.20 m=9.80 md_1 = 7.40\text{ m} - 1.80\text{ m} = 5.60\text{ m} \implies d_2 = |3.20\text{ m} - 7.40\text{ m}| = 4.20\text{ m} \implies d = 5.60\text{ m} + 4.20\text{ m} = 9.80\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the final coordinate of the cart from the given motion data.

You correctly calculated the distance of each individual leg and summed them to obtain the total distance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Displacement Formula

You set up the displacement formula backwards as initial position minus final position rather than final minus initial.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the Greek symbol delta (Δ\Delta) as a generic difference rather than its strict physical definition as final state minus initial state (Δx=xf−xi\Delta x = x_f - x_i).

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Delta (Change)
  • In physics and mathematics, Δ(quantity)=(quantity)final−(quantity)initial\Delta(\text{quantity}) = (\text{quantity})_{\text{final}} - (\text{quantity})_{\text{initial}} always.

  • Always write down Δx=xf−xi\Delta x = x_f - x_i before substituting numeric values to avoid inverting signs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard definition of displacement: Δx=xfinal−xinitial=x2−x0\Delta x = x_{\text{final}} - x_{\text{initial}} = x_2 - x_0.

  2. Substitute the coordinates: Δx=+3.20 m−(+1.80 m)=+1.40 m\Delta x = +3.20\text{ m} - (+1.80\text{ m}) = +1.40\text{ m}.

Final answer

(a) xfinal=+3.20 mx_{\text{final}} = +3.20\text{ m}; (b) Δx=+1.40 m\Delta x = +1.40\text{ m}; (c) d=9.80 md = 9.80\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that the change symbol Δ\Delta always means 'final minus initial'.

  • Check that the sign of your displacement matches the physical direction from where the object started to where it ended.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the farthest point reached as the final position of the entire motion.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xfinal=+7.40 mx_{\text{final}} = +7.40\text{ m}

    Correct

    xfinal=x2=+3.20 mx_{\text{final}} = x_2 = +3.20\text{ m}

    You selected the turnaround point x1=+7.40 mx_1 = +7.40\text{ m} as the final position, but the cart continued moving backward for another 3.00 s3.00\text{ s} and finished at x2=+3.20 mx_2 = +3.20\text{ m}.

  2. Step 2

    Δx=7.40 m−1.80 m=+5.60 m\Delta x = 7.40\text{ m} - 1.80\text{ m} = +5.60\text{ m}

    Correct

    Δx=x2−x0=+3.20 m−(+1.80 m)=+1.40 m\Delta x = x_2 - x_0 = +3.20\text{ m} - (+1.80\text{ m}) = +1.40\text{ m}

    You correctly used the definition of displacement Δx=xfinal−xinitial\Delta x = x_{\text{final}} - x_{\text{initial}}, but your result was affected by substituting the incorrect final position from Step 1.

  3. Step 3

    d1=7.40 m−1.80 m=5.60 m  ⟹  d2=∣3.20 m−7.40 m∣=4.20 m  ⟹  d=5.60 m+4.20 m=9.80 md_1 = 7.40\text{ m} - 1.80\text{ m} = 5.60\text{ m} \implies d_2 = |3.20\text{ m} - 7.40\text{ m}| = 4.20\text{ m} \implies d = 5.60\text{ m} + 4.20\text{ m} = 9.80\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the formula for total displacement as final position minus initial position.

You split the reversing motion into two distinct segments to determine distance.

You correctly took the absolute value of the negative segment displacement to obtain a positive distance.

You summed the individual distances accurately to find the total distance of 9.80 m9.80\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Turnaround Point Confused with Final Position

You selected the farthest point reached (x1=+7.40 mx_1 = +7.40\text{ m}) as the final position rather than the cart's location at the conclusion of the entire 7.00 s7.00\text{ s} time interval.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing an intermediate turning point (maximum coordinate reached) with the true final state of the motion, which subsequently causes overall displacement to reflect only the first leg of the journey.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying Final Position
  • The final position xfinalx_{\text{final}} is strictly the coordinate at the end of the total elapsed time (t=ttotalt = t_{\text{total}}), regardless of any intermediate peaks or turning points.

  • Always locate the timestamp at the end of the entire problem statement (t=7.00 st = 7.00\text{ s}) and record the position corresponding to that exact moment (x2=+3.20 mx_2 = +3.20\text{ m}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the final position at the end of the 7.00 s7.00\text{ s} interval: xfinal=x2=+3.20 mx_{\text{final}} = x_2 = +3.20\text{ m}.

  2. Compute the total displacement from the initial position to the final position: Δx=xfinal−xinitial=+3.20 m−(+1.80 m)=+1.40 m\Delta x = x_{\text{final}} - x_{\text{initial}} = +3.20\text{ m} - (+1.80\text{ m}) = +1.40\text{ m}.

Final answer

(a) Final position: x2=+3.20 mx_2 = +3.20\text{ m}; (b) Total displacement: Δx=+1.40 m\Delta x = +1.40\text{ m}; (c) Total distance: d=9.80 md = 9.80\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Mark the timeline or sketch arrows along a number line with clear labels for t0t_0, t1t_1, and t2t_2 before writing formulas.

  • Remember that displacement depends solely on where you start and where you end, ignoring any turning points in between.

Lock it in

Similar question

01

A toy car starts at x0=−2.0 mx_0 = -2.0\text{ m}, drives to x1=+5.0 mx_1 = +5.0\text{ m}, and then backs up to x2=+1.0 mx_2 = +1.0\text{ m}. Find (a) the displacement Δx\Delta x and (b) the total distance dd.

Answer

(a) Δx=x2−x0=+1.0 m−(−2.0 m)=+3.0 m\Delta x = x_2 - x_0 = +1.0\text{ m} - (-2.0\text{ m}) = +3.0\text{ m}. (b) d=∣5.0−(−2.0)∣+∣1.0−5.0∣=7.0 m+4.0 m=11.0 md = |5.0 - (-2.0)| + |1.0 - 5.0| = 7.0\text{ m} + 4.0\text{ m} = 11.0\text{ m}.

02

A particle moves along the xx-axis from x=+4.0 mx = +4.0\text{ m} to x=−6.0 mx = -6.0\text{ m}, pauses, and then moves to x=+2.0 mx = +2.0\text{ m}. Determine the total displacement and the total distance traveled.

Answer

Displacement: Δx=xfinal−xinitial=+2.0 m−(+4.0 m)=−2.0 m\Delta x = x_{\text{final}} - x_{\text{initial}} = +2.0\text{ m} - (+4.0\text{ m}) = -2.0\text{ m}. Distance: d1=∣−6.0−4.0∣=10.0 md_1 = |-6.0 - 4.0| = 10.0\text{ m}, d2=∣2.0−(−6.0)∣=8.0 md_2 = |2.0 - (-6.0)| = 8.0\text{ m}, giving d=10.0 m+8.0 m=18.0 md = 10.0\text{ m} + 8.0\text{ m} = 18.0\text{ m}.

03

An elevator starts at ground level (y=0 my = 0\text{ m}), ascends to the 10th floor at y=+35.0 my = +35.0\text{ m}, descends to the basement at y=−8.0 my = -8.0\text{ m}, and finally rises to the lobby at y=0 my = 0\text{ m}. Calculate its net displacement Δy\Delta y and total distance traveled dd.

Answer

Displacement: Δy=yfinal−yinitial=0 m−0 m=0 m\Delta y = y_{\text{final}} - y_{\text{initial}} = 0\text{ m} - 0\text{ m} = 0\text{ m}. Distance: d=∣35.0−0∣+∣−8.0−35.0∣+∣0−(−8.0)∣=35.0 m+43.0 m+8.0 m=86.0 md = |35.0 - 0| + |-8.0 - 35.0| + |0 - (-8.0)| = 35.0\text{ m} + 43.0\text{ m} + 8.0\text{ m} = 86.0\text{ m}.

Loading workspace…