Resources

A vertically polarized light beam with an electric field amplitude of E0=32.0 V/mE_0 = 32.0\text{ V/m} and initial intensity I1=1.36 W/m2I_1 = 1.36\text{ W/m}^2 travels in the +z+z-direction. The beam passes through a linear polarizer whose transmission axis lies in the xyxy-plane at an angle of θ=60.0∘\theta = 60.0^\circ measured relative to the horizontal xx-axis. (a) Determine the transmitted intensity I2I_2 in W/m2\text{W/m}^2. (b) Determine the amplitude of the transmitted electric field EE in V/m\text{V/m}.

Answer and steps

Final answer

(a) I2=1.02 W/m2I_2 = 1.02\text{ W/m}^2; (b) E=27.7 V/mE = 27.7\text{ V/m}

Steps

01

Identify the angle between the polarization direction and the transmission axis

According to Malus's Law, the transmitted intensity and electric field amplitude depend on the angle ϕ\phi between the incident light's direction of polarization and the transmission axis of the polarizer.

  • The incident light is vertically polarized, meaning its electric field vector oscillates along the vertical yy-axis (90.0∘90.0^\circ relative to the horizontal xx-axis).
  • The polarizer's transmission axis is oriented at an angle of θ=60.0∘\theta = 60.0^\circ relative to the horizontal xx-axis.

Therefore, the angle ϕ\phi between the electric field of the incident wave and the polarizer's transmission axis is:

ϕ=90.0∘−60.0∘=30.0∘\phi = 90.0^\circ - 60.0^\circ = 30.0^\circ

Common Pitfall: Do not directly use the angle given relative to the horizontal axis (θ=60.0∘\theta = 60.0^\circ) in Malus's Law. Malus's Law always requires the relative angle between the light's polarization axis and the polarizer's transmission axis.


02

Calculate the transmitted intensity I2I_2

By Malus's Law, the transmitted intensity I2I_2 is related to the incident intensity I1I_1 by:

I2=I1cos⁡2ϕI_2 = I_1 \cos^2\phi

Substitute the given values:

I2=1.36 W/m2⋅cos⁡2(30.0∘)I_2 = 1.36\text{ W/m}^2 \cdot \cos^2(30.0^\circ)

Since cos⁡(30.0∘)=32\cos(30.0^\circ) = \frac{\sqrt{3}}{2}, we have cos⁡2(30.0∘)=(32)2=34=0.75\cos^2(30.0^\circ) = \left(\frac{\sqrt{3}}{2}\right)^2 = \frac{3}{4} = 0.75:

I2=1.36 W/m2⋅0.75=1.02 W/m2I_2 = 1.36\text{ W/m}^2 \cdot 0.75 = 1.02\text{ W/m}^2


03

Calculate the transmitted electric field amplitude EE

The transmitted electric field is the component of the incident electric field parallel to the transmission axis:

E=E0cos⁡ϕE = E_0 \cos\phi

Substitute E0=32.0 V/mE_0 = 32.0\text{ V/m} and ϕ=30.0∘\phi = 30.0^\circ:

E=32.0 V/m⋅cos⁡(30.0∘)=32.0 V/m⋅0.8660=27.7 V/mE = 32.0\text{ V/m} \cdot \cos(30.0^\circ) = 32.0\text{ V/m} \cdot 0.8660 = 27.7\text{ V/m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the angle relative to the horizontal x-axis (60.0°) directly in Malus's law instead of finding the angle relative to the vertical polarization direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    θ\theta = 60.0^∘\circ   ⟹  \implies I_2 = I_1 \cos^2(θ\theta)   ⟹  \implies I_2 = 1.36 ×\times \cos^2(60.0^∘\circ)   ⟹  \implies I_2 = 1.36 ×\times 0.25 = 0.34 W/m\text{ W/m}^2

    Correct

    ϕ\phi = 90.0^∘\circ - 60.0^∘\circ = 30.0^∘\circ   ⟹  \implies I_2 = I_1 \cos^2(ϕ\phi) = 1.36 ×\times \cos^2(30.0^∘\circ) = 1.02 W/m\text{ W/m}^2

    The incident light is polarized vertically along the yy-axis (90.0∘90.0^\circ), while the transmission axis is at 60.0∘60.0^\circ from the horizontal xx-axis. The angle in Malus's law must be measured between the incident polarization direction and the transmission axis, giving ϕ=90.0∘−60.0∘=30.0∘\phi = 90.0^\circ - 60.0^\circ = 30.0^\circ, not 60.0∘60.0^\circ.

  2. Step 2

    E = E_0 \cos(θ\theta)   ⟹  \implies E = 32.0 ×\times \cos(60.0^∘\circ)   ⟹  \implies E = 32.0 ×\times 0.5 = 16.0 V/m\text{ V/m}

    Correct

    E = E_0 \cos(ϕ\phi) = 32.0 ×\times \cos(30.0^∘\circ) ≈\approx 27.7 V/m\text{ V/m}

    You correctly related the transmitted amplitude to E0cos⁡ϕE_0 \cos\phi, but the calculation inherited the incorrect angle θ=60.0∘\theta = 60.0^\circ instead of ϕ=30.0∘\phi = 30.0^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the mathematical formulas for Malus's law and the transmitted electric field amplitude.

You executed the arithmetic calculations and trigonometric evaluations accurately for your chosen angle.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reference Angle Misidentification

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the angle given relative to the horizontal coordinate axis directly into Malus's law. In polarization problems, the angle ϕ\phi in I=I0cos⁡2ϕI = I_0 \cos^2\phi is strictly defined as the relative angle between the incident electric field's polarization direction and the polarizer's transmission axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Angle Definition in Malus's Law
  • In I=I0cos⁡2ϕI = I_0 \cos^2\phi and E=E0cos⁡ϕE = E_0 \cos\phi, the angle ϕ\phi must always be the geometric angle between the incident polarization vector E⃗0\vec{E}_0 and the polarizer's transmission axis.

  • Always draw a quick xyxy-plane diagram showing both the polarization axis and the polarizer transmission axis, then subtract their orientations to find the included angle ϕ\phi.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the angle between the incident polarization direction (vertical, 90.0∘90.0^\circ) and the transmission axis (60.0∘60.0^\circ): ϕ=90.0∘−60.0∘=30.0∘\phi = 90.0^\circ - 60.0^\circ = 30.0^\circ.

  2. Compute transmitted intensity: I2=1.36 W/m2×cos⁡2(30.0∘)=1.36×0.75=1.02 W/m2I_2 = 1.36\text{ W/m}^2 \times \cos^2(30.0^\circ) = 1.36 \times 0.75 = 1.02\text{ W/m}^2.

  3. Compute transmitted electric field amplitude: E=32.0 V/m×cos⁡(30.0∘)=32.0×0.8660=27.7 V/mE = 32.0\text{ V/m} \times \cos(30.0^\circ) = 32.0 \times 0.8660 = 27.7\text{ V/m}.

Final answer

(a) I2=1.02 W/m2I_2 = 1.02\text{ W/m}^2; (b) E=27.7 V/mE = 27.7\text{ V/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the coordinate axes with the initial E⃗\vec{E} vector and the transmission axis before picking your angle.

  • Review practice problems where polarizers are referenced to horizontal or vertical axes rather than relative to each other.

OverviewACEpath Teacher's Diagnosis

02 The student applies the squared cosine dependence of intensity to the electric field amplitude instead of using the linear cosine dependence.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ′=90.0∘−60.0∘=30.0∘\theta' = 90.0^\circ - 60.0^\circ = 30.0^\circ

  2. Step 2

    I2=I1cos⁡2(θ′)  ⟹  I2=1.36×cos⁡2(30.0∘)  ⟹  I2=1.36×0.75=1.02 W/m2I_2 = I_1 \cos^2(\theta') \implies I_2 = 1.36 \times \cos^2(30.0^\circ) \implies I_2 = 1.36 \times 0.75 = 1.02\text{ W/m}^2

  3. Step 3

    E=E0cos⁡2(θ′)  ⟹  E=32.0×cos⁡2(30.0∘)  ⟹  E=32.0×0.75=24.0 V/mE = E_0 \cos^2(\theta') \implies E = 32.0 \times \cos^2(30.0^\circ) \implies E = 32.0 \times 0.75 = 24.0\text{ V/m}

    Correct

    E=E0cos⁡ϕ=32.0 V/m⋅cos⁡(30.0∘)≈27.7 V/mE = E_0 \cos\phi = 32.0\text{ V/m} \cdot \cos(30.0^\circ) \approx 27.7\text{ V/m}

    The transmitted electric field vector is the projection of the incident field onto the transmission axis, which scales linearly as E=E0cos⁡ϕE = E_0 \cos\phi, not as cos⁡2ϕ\cos^2\phi. The squared cosine arises only for intensity because intensity is proportional to the square of the electric field (I∝E2I \propto E^2).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the relative angle between the vertical polarization direction and the polarizer's transmission axis.

You properly applied Malus's Law to find the transmitted intensity I2I_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing amplitude and intensity angular dependencies in polarization

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You transferred the cos⁡2θ\cos^2\theta factor from Malus's Law for intensity directly onto the electric field amplitude equation, forgetting that the electric field transmission is a simple geometric vector projection (E=E0cos⁡θE = E_0 \cos\theta), while intensity is squared because I∝E2I \propto E^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Electric Field vs. Intensity Dependence
  • For a polarizer at angle θ\theta to the incident polarization, the transmitted electric field amplitude is E=E0cos⁡θE = E_0 \cos\theta, while the transmitted intensity is I=I0cos⁡2θI = I_0 \cos^2\theta.

  • Always verify whether you are solving for amplitude (vector projection, linear in cos⁡θ\cos\theta) or intensity (energy flux, quadratic in cos⁡2θ\cos^2\theta).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the linear projection for the transmitted electric field amplitude: E=E0cos⁡θ′E = E_0 \cos\theta'.

  2. Substitute E0=32.0 V/mE_0 = 32.0\text{ V/m} and θ′=30.0∘\theta' = 30.0^\circ: E=32.0 V/m⋅cos⁡(30.0∘)E = 32.0\text{ V/m} \cdot \cos(30.0^\circ).

  3. Evaluate the numerical value: E=32.0⋅0.8660=27.7 V/mE = 32.0 \cdot 0.8660 = 27.7\text{ V/m}.

Final answer

(a) I2=1.02 W/m2I_2 = 1.02\text{ W/m}^2; (b) E=27.7 V/mE = 27.7\text{ V/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between wave amplitude and wave intensity (I∝E2I \propto E^2).

  • Practice identifying whether a question asks for electric field amplitude or intensity before choosing between cos⁡θ\cos\theta and cos⁡2θ\cos^2\theta.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the cosine factor when calculating transmitted intensity via Malus's law.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ′=90.0∘−60.0∘=30.0∘\theta' = 90.0^\circ - 60.0^\circ = 30.0^\circ

  2. Step 2

    I2=I1cos⁡(θ′)  ⟹  I2=1.36×cos⁡(30.0∘)  ⟹  I2=1.36×0.866=1.18 W/m2I_2 = I_1 \cos(\theta') \implies I_2 = 1.36 \times \cos(30.0^\circ) \implies I_2 = 1.36 \times 0.866 = 1.18\text{ W/m}^2

    Correct

    I2=I1cos⁡2ϕ=1.36 W/m2⋅cos⁡2(30.0∘)=1.36⋅0.75=1.02 W/m2I_2 = I_1 \cos^2\phi = 1.36\text{ W/m}^2 \cdot \cos^2(30.0^\circ) = 1.36 \cdot 0.75 = 1.02\text{ W/m}^2

    Malus's law states that transmitted intensity depends on the square of the cosine of the angle (I=I0cos⁡2ϕI = I_0 \cos^2\phi), because wave intensity is proportional to the square of electric field amplitude (I∝E2I \propto E^2).

  3. Step 3

    E=E0cos⁡(θ′)  ⟹  E=32.0×cos⁡(30.0∘)  ⟹  E=32.0×0.866=27.7 V/mE = E_0 \cos(\theta') \implies E = 32.0 \times \cos(30.0^\circ) \implies E = 32.0 \times 0.866 = 27.7\text{ V/m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the vertical orientation of the incident beam and subtracted the given angle to find the true relative angle ϕ=30.0∘\phi = 30.0^\circ.

You correctly calculated the transmitted electric field amplitude using E=E0cos⁡ϕE = E_0 \cos\phi.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula omission: omitted square on cosine in Malus's law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the linear projection rule for electric field amplitude (E=E0cos⁡ϕE = E_0 \cos\phi) with Malus's law for intensity (I=I0cos⁡2ϕI = I_0 \cos^2\phi). Because intensity is proportional to the square of the field amplitude, the cosine factor must also be squared for intensity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Field vs. Intensity dependence on angle
  • E=E0cos⁡ϕE = E_0 \cos\phi for electric field amplitude; I=I0cos⁡2ϕI = I_0 \cos^2\phi for light intensity.

  • Always check whether a question asks for amplitude (EE) or intensity (II) before selecting whether to write cos⁡ϕ\cos\phi or cos⁡2ϕ\cos^2\phi.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Malus's law with the squared cosine factor: I2=I1cos⁡2ϕI_2 = I_1 \cos^2\phi.

  2. Substitute I1=1.36 W/m2I_1 = 1.36\text{ W/m}^2 and ϕ=30.0∘\phi = 30.0^\circ: I2=1.36 W/m2⋅[cos⁡(30.0∘)]2I_2 = 1.36\text{ W/m}^2 \cdot [\cos(30.0^\circ)]^2.

  3. Evaluate cos⁡(30.0∘)=32\cos(30.0^\circ) = \frac{\sqrt{3}}{2}, so cos⁡2(30.0∘)=34=0.75\cos^2(30.0^\circ) = \frac{3}{4} = 0.75.

  4. Multiply: I2=1.36⋅0.75=1.02 W/m2I_2 = 1.36 \cdot 0.75 = 1.02\text{ W/m}^2.

Final answer

(a) I2=1.02 W/m2I_2 = 1.02\text{ W/m}^2; (b) E=27.7 V/mE = 27.7\text{ V/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical reason why Malus's law contains cos⁡2ϕ\cos^2\phi (Poynting vector magnitude and intensity scale as E2E^2).

  • Practice paired calculations where you solve for both transmitted field amplitude and transmitted intensity in the same problem.

Lock it in

Similar question

01

A beam of horizontally polarized light with intensity I0=80 W/m2I_0 = 80\text{ W/m}^2 passes through a polarizing filter whose transmission axis is oriented at 35∘35^\circ to the vertical yy-axis. Calculate the transmitted intensity.

Answer

I=26.3 W/m2I = 26.3\text{ W/m}^2. Key steps: Horizontal polarization lies along 0∘0^\circ (or xx-axis). The polarizer axis is at 35∘35^\circ from the vertical, which is 90∘−35∘=55∘90^\circ - 35^\circ = 55^\circ from the horizontal. Thus ϕ=55∘\phi = 55^\circ. Applying Malus's law: I=80cos⁡2(55∘)≈80×(0.5736)2≈26.3 W/m2I = 80 \cos^2(55^\circ) \approx 80 \times (0.5736)^2 \approx 26.3\text{ W/m}^2.

02

Linearly polarized light with electric field amplitude E0=45 V/mE_0 = 45\text{ V/m} is polarized at an angle of +20∘+20^\circ relative to the positive xx-axis. It passes through a polarizer with transmission axis oriented at +70∘+70^\circ relative to the positive xx-axis. Find the transmitted electric field amplitude EE and the ratio of transmitted to incident intensity I/I0I/I_0.

Answer

E=28.9 V/mE = 28.9\text{ V/m}, I/I0=0.413I/I_0 = 0.413. Key steps: The included angle between the polarization direction and transmission axis is ϕ=70∘−20∘=50∘\phi = 70^\circ - 20^\circ = 50^\circ. Transmitted amplitude is E=E0cos⁡(50∘)=45×0.6428≈28.9 V/mE = E_0 \cos(50^\circ) = 45 \times 0.6428 \approx 28.9\text{ V/m}. Intensity ratio is I/I0=cos⁡2(50∘)≈0.413I/I_0 = \cos^2(50^\circ) \approx 0.413.

03

An unpolarized light beam of intensity Iin=200 W/m2I_{\text{in}} = 200\text{ W/m}^2 passes through two successive linear polarizers. The first polarizer has its transmission axis oriented vertically. The second polarizer has its transmission axis oriented at an angle of 40∘40^\circ relative to the horizontal xx-axis. Determine the final transmitted intensity.

Answer

Ifinal=41.3 W/m2I_{\text{final}} = 41.3\text{ W/m}^2. Key steps: After the first polarizer, unpolarized light becomes vertically polarized with intensity I1=12Iin=100 W/m2I_1 = \frac{1}{2}I_{\text{in}} = 100\text{ W/m}^2. The second polarizer is at 40∘40^\circ to the horizontal, so the angle between the vertical polarization (90∘90^\circ) and this transmission axis is ϕ=90∘−40∘=50∘\phi = 90^\circ - 40^\circ = 50^\circ. Transmitted intensity is Ifinal=I1cos⁡2(50∘)=100×(0.6428)2≈41.3 W/m2I_{\text{final}} = I_1 \cos^2(50^\circ) = 100 \times (0.6428)^2 \approx 41.3\text{ W/m}^2.

Loading workspace…