Resources

An illuminated arrow of height ho=4.50 cmh_o = 4.50\text{ cm} is placed upright on the optical axis of a concave spherical mirror at a distance of do=36.0 cmd_o = 36.0\text{ cm} in front of the mirror vertex. The mirror has a radius of curvature of R=24.0 cmR = 24.0\text{ cm}. Calculate: (a) the focal length ff of the mirror, (b) the image distance did_i from the vertex, (c) the lateral magnification mm, and (d) the image height hih_i. Specify whether the image is real or virtual, and upright or inverted.

Answer and steps

Final answer

(a) f=+12.0 cmf = +12.0\text{ cm}; (b) di=+18.0 cmd_i = +18.0\text{ cm} (in front of mirror, real); (c) m=−0.500m = -0.500; (d) hi=−2.25 cmh_i = -2.25\text{ cm} (inverted, real).

Steps

1. Sign Convention and Focal Length

For spherical mirrors in standard Cartesian/optics sign conventions:

  • Distances measured in front of the reflective surface (where real light rays travel) are positive.
  • A concave mirror converges incident parallel light rays to a focal point in front of the mirror, meaning both its radius of curvature RR and focal length ff are positive:

f=R2f = \frac{R}{2}

Substituting the given radius R=24.0 cmR = 24.0\text{ cm}:

f=24.0 cm2=+12.0 cmf = \frac{24.0\text{ cm}}{2} = +12.0\text{ cm}


2. Image Distance (did_i)

Apply the mirror equation relating the object distance dod_o, image distance did_i, and focal length ff:

1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}

Rearrange to solve for 1di\frac{1}{d_i}:

1di=1f−1do\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o}

Substitute f=12.0 cmf = 12.0\text{ cm} and do=36.0 cmd_o = 36.0\text{ cm}:

1di=112.0 cm−136.0 cm=3−136.0 cm=236.0 cm=118.0 cm\frac{1}{d_i} = \frac{1}{12.0\text{ cm}} - \frac{1}{36.0\text{ cm}} = \frac{3 - 1}{36.0\text{ cm}} = \frac{2}{36.0\text{ cm}} = \frac{1}{18.0\text{ cm}}

di=+18.0 cmd_i = +18.0\text{ cm}

  • Interpretation: Because di>0d_i > 0, the image is formed 18.0 cm18.0\text{ cm} in front of the mirror vertex (on the same side as the incoming light). Therefore, the image is real.

3. Lateral Magnification (mm)

The lateral magnification of a spherical mirror is given by:

m=−didom = -\frac{d_i}{d_o}

Substitute di=+18.0 cmd_i = +18.0\text{ cm} and do=36.0 cmd_o = 36.0\text{ cm}:

m=−18.0 cm36.0 cm=−0.500m = -\frac{18.0\text{ cm}}{36.0\text{ cm}} = -0.500

  • Common Pitfall: Forgetting the negative sign in m=−di/dom = -d_i / d_o. The negative sign reflects the fact that a positive did_i for a single reflection yields an inverted image relative to the object.

4. Image Height (hih_i) and Nature of the Image

Magnification is also the ratio of image height hih_i to object height hoh_o:

m=hiho  ⟹  hi=m⋅hom = \frac{h_i}{h_o} \implies h_i = m \cdot h_o

Substitute m=−0.500m = -0.500 and ho=4.50 cmh_o = 4.50\text{ cm}:

hi=(−0.500)(4.50 cm)=−2.25 cmh_i = (-0.500)(4.50\text{ cm}) = -2.25\text{ cm}

  • Image Characteristics:
    • Since di>0d_i > 0, the image is real (it can be projected onto a screen).
    • Since m<0m < 0 and hi<0h_i < 0, the image is inverted (points downward relative to the upright object) and reduced to half the object's height (∣m∣=0.500|m| = 0.500).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student equates the focal length to the radius of curvature instead of half the radius, leading to an incorrect image distance, magnification, and height.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f=R=24.0 cmf = R = 24.0\text{ cm}

    Correct

    f=R2=24.0 cm2=+12.0 cmf = \frac{R}{2} = \frac{24.0\text{ cm}}{2} = +12.0\text{ cm}

    For a spherical mirror under the paraxial approximation, the focal length is half of the radius of curvature (f=R/2f = R/2), not the full radius.

  2. Step 2

    1di=1f−1do  ⟹  1di=124.0−136.0=372.0−272.0=172.0  ⟹  di=72.0 cm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} \implies \frac{1}{d_i} = \frac{1}{24.0} - \frac{1}{36.0} = \frac{3}{72.0} - \frac{2}{72.0} = \frac{1}{72.0} \implies d_i = 72.0\text{ cm}

    Correct

    1di=112.0 cm−136.0 cm=236.0 cm  ⟹  di=+18.0 cm\frac{1}{d_i} = \frac{1}{12.0\text{ cm}} - \frac{1}{36.0\text{ cm}} = \frac{2}{36.0\text{ cm}} \implies d_i = +18.0\text{ cm}

    Your algebraic rearrangement of the mirror equation and common denominator calculation were executed flawlessly, but the numerical result was affected by substituting f=24.0 cmf = 24.0\text{ cm} instead of 12.0 cm12.0\text{ cm}.

  3. Step 3

    m=−dido=−72.036.0=−2.00m = -\frac{d_i}{d_o} = -\frac{72.0}{36.0} = -2.00

    Correct

    m=−dido=−18.0 cm36.0 cm=−0.500m = -\frac{d_i}{d_o} = -\frac{18.0\text{ cm}}{36.0\text{ cm}} = -0.500

    You correctly recalled and applied the magnification formula m=−di/dom = -d_i / d_o, but the result was affected by the incorrect value of did_i.

  4. Step 4

    hi=m∗ho=−2.00∗4.50 cm=−9.00 cmh_i = m * h_o = -2.00 * 4.50\text{ cm} = -9.00\text{ cm}

    Correct

    hi=m⋅ho=(−0.500)(4.50 cm)=−2.25 cmh_i = m \cdot h_o = (-0.500)(4.50\text{ cm}) = -2.25\text{ cm}

    You used the correct relation between magnification and image height, but the calculation carried forward your previous value of mm.

  5. Step 5

    Since di>0 and m<0, the image is real and inverted.\text{Since } d_i > 0 \text{ and } m < 0, \text{ the image is real and inverted.}

WHAT YOU DID WELL
Compliments from Your Teacher

You stated and manipulated the spherical mirror equation 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} with complete algebraic precision.

You remembered the negative sign in the lateral magnification formula m=−didom = -\frac{d_i}{d_o}.

You correctly interpreted the physical meaning of the signs for did_i and mm to determine the image's orientation and reality.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between radius of curvature and focal length

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the focal point and the center of curvature as coincident by setting f=Rf = R, forgetting that parallel rays converge halfway between the vertex and the center of curvature (f=R/2f = R/2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Spherical Mirror Focal Length
  • For a spherical mirror with radius of curvature RR, the focal length is f=R2f = \frac{R}{2}.

  • Always divide the given radius of curvature by 2 to obtain the focal length before substituting into the mirror equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find focal length: f=R2=24.0 cm2=+12.0 cmf = \frac{R}{2} = \frac{24.0\text{ cm}}{2} = +12.0\text{ cm}.

  2. Substitute into mirror equation: 1di=112.0 cm−136.0 cm=3−136.0 cm=236.0 cm=118.0 cm  ⟹  di=+18.0 cm\frac{1}{d_i} = \frac{1}{12.0\text{ cm}} - \frac{1}{36.0\text{ cm}} = \frac{3 - 1}{36.0\text{ cm}} = \frac{2}{36.0\text{ cm}} = \frac{1}{18.0\text{ cm}} \implies d_i = +18.0\text{ cm}.

  3. Compute magnification: m=−dido=−18.0 cm36.0 cm=−0.500m = -\frac{d_i}{d_o} = -\frac{18.0\text{ cm}}{36.0\text{ cm}} = -0.500.

  4. Compute image height: hi=m⋅ho=(−0.500)(4.50 cm)=−2.25 cmh_i = m \cdot h_o = (-0.500)(4.50\text{ cm}) = -2.25\text{ cm}.

Final answer

(a) f=+12.0 cmf = +12.0\text{ cm}; (b) di=+18.0 cmd_i = +18.0\text{ cm}; (c) m=−0.500m = -0.500; (d) hi=−2.25 cmh_i = -2.25\text{ cm}; real and inverted.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric relationship between the vertex VV, focal point FF, and center of curvature CC on the principal axis.

  • Practice quickly sketching principal rays (parallel ray to focus, focal ray to parallel) to visually verify whether an image should be diminished or magnified.

OverviewACEpath Teacher's Diagnosis

02 The student omits the negative sign in the magnification formula, writing m = d_i/d_o, which incorrectly predicts an upright image.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    f=R2=24.0 cm2=12.0 cmf = \frac{R}{2} = \frac{24.0\text{ cm}}{2} = 12.0\text{ cm}

  2. Step 2

    1di=1f−1do=112.0−136.0=236.0=118.0  ⟹  di=18.0 cm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{1}{12.0} - \frac{1}{36.0} = \frac{2}{36.0} = \frac{1}{18.0} \implies d_i = 18.0\text{ cm}

  3. Step 3

    m=dido=18.036.0=0.500m = \frac{d_i}{d_o} = \frac{18.0}{36.0} = 0.500

    Correct

    m=−dido=−18.0 cm36.0 cm=−0.500m = -\frac{d_i}{d_o} = -\frac{18.0\text{ cm}}{36.0\text{ cm}} = -0.500

    You omitted the negative sign in the spherical mirror magnification formula. In standard optics sign conventions, the lateral magnification of a mirror is defined as m=−didom = -\frac{d_i}{d_o}.

  4. Step 4

    hi=m⋅ho=0.500⋅4.50 cm=2.25 cmh_i = m \cdot h_o = 0.500 \cdot 4.50\text{ cm} = 2.25\text{ cm}

    Correct

    hi=m⋅ho=(−0.500)(4.50 cm)=−2.25 cmh_i = m \cdot h_o = (-0.500)(4.50\text{ cm}) = -2.25\text{ cm}

    You correctly applied the relationship hi=m⋅hoh_i = m \cdot h_o, but the positive value propagated from your previous sign error in mm.

  5. Step 5

    Since di>0 and m>0, the image is real and upright.\text{Since } d_i > 0 \text{ and } m > 0, \text{ the image is real and upright.}

    Correct

    Since di>0 and m<0, the image is real and inverted.\text{Since } d_i > 0 \text{ and } m < 0, \text{ the image is real and inverted.}

    You correctly determined that di>0d_i > 0 corresponds to a real image, but because mm should be negative, the image is inverted, not upright.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the radius of curvature to the focal length for a concave mirror.

You rearranged and solved the mirror equation accurately to obtain di=+18.0 cmd_i = +18.0\text{ cm}.

You recognized that a positive image distance indicates a real image.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in mirror lateral magnification

Writing m=didom = \frac{d_i}{d_o} instead of m=−didom = -\frac{d_i}{d_o}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the magnification magnitude ∣m∣=∣di∣do|m| = \frac{|d_i|}{d_o} with the signed lateral magnification m=−didom = -\frac{d_i}{d_o}, or confusing the mirror magnification formula with thin-lens conventions where m=+didom = +\frac{d_i}{d_o} in some older notations. For all spherical mirrors under standard conventions, a real image formed on the reflecting side (di>0d_i > 0) is upside down relative to the object, requiring an intrinsic minus sign in m=−didom = -\frac{d_i}{d_o}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mirror Magnification Formula
  • m=−dido=hihom = -\frac{d_i}{d_o} = \frac{h_i}{h_o}

  • Always include the minus sign for spherical mirrors: m=−didom = -\frac{d_i}{d_o}.

Orientation and Sign of Magnification
  • m>0  ⟺  uprightm > 0 \iff \text{upright}, m<0  ⟺  invertedm < 0 \iff \text{inverted}

  • Check that a real image formed by reflection in front of a concave mirror (di>0d_i > 0) gives a negative magnification, confirming it is inverted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct lateral magnification formula: m=−dido=−18.0 cm36.0 cm=−0.500m = -\frac{d_i}{d_o} = -\frac{18.0\text{ cm}}{36.0\text{ cm}} = -0.500.

  2. Calculate image height: hi=m⋅ho=(−0.500)(4.50 cm)=−2.25 cmh_i = m \cdot h_o = (-0.500)(4.50\text{ cm}) = -2.25\text{ cm}.

  3. Determine image properties: since di=+18.0 cm>0d_i = +18.0\text{ cm} > 0, the image is real; since m=−0.500<0m = -0.500 < 0, the image is inverted.

Final answer

(a) f=+12.0 cmf = +12.0\text{ cm}; (b) di=+18.0 cmd_i = +18.0\text{ cm} (real); (c) m=−0.500m = -0.500; (d) hi=−2.25 cmh_i = -2.25\text{ cm} (inverted).

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that for spherical mirrors, m=−didom = -\frac{d_i}{d_o}, with an explicit negative sign.

  • Whenever an image is real (di>0d_i > 0) in a single-mirror system, verify with a ray diagram that the real image is inverted (m<0m < 0).

OverviewACEpath Teacher's Diagnosis

03 The student adds the reciprocals instead of subtracting when isolating 1/d_i, calculating 1/d_i = 1/f + 1/d_o.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    f=R2=24.0 cm2=12.0 cmf = \frac{R}{2} = \frac{24.0\text{ cm}}{2} = 12.0\text{ cm}

  2. Step 2

    1di=1f+1do=112.0+136.0=336.0+136.0=436.0=19.0 cm−1  ⟹  di=9.0 cm\frac{1}{d_i} = \frac{1}{f} + \frac{1}{d_o} = \frac{1}{12.0} + \frac{1}{36.0} = \frac{3}{36.0} + \frac{1}{36.0} = \frac{4}{36.0} = \frac{1}{9.0}\text{ cm}^{-1} \implies d_i = 9.0\text{ cm}

    Correct

    1di=1f−1do=112.0 cm−136.0 cm=236.0 cm=118.0 cm  ⟹  di=+18.0 cm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{1}{12.0\text{ cm}} - \frac{1}{36.0\text{ cm}} = \frac{2}{36.0\text{ cm}} = \frac{1}{18.0\text{ cm}} \implies d_i = +18.0\text{ cm}

    The mirror formula is 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}. Isolating 1di\frac{1}{d_i} requires subtracting 1do\frac{1}{d_o} from 1f\frac{1}{f}, not adding them.

  3. Step 3

    m=−dido=−9.036.0=−0.25m = -\frac{d_i}{d_o} = -\frac{9.0}{36.0} = -0.25

    Correct

    m=−dido=−18.0 cm36.0 cm=−0.500m = -\frac{d_i}{d_o} = -\frac{18.0\text{ cm}}{36.0\text{ cm}} = -0.500

    You used the correct magnification formula including the negative sign, but your numerical result was affected by the incorrect image distance.

  4. Step 4

    hi=m⋅ho=−0.25⋅4.50 cm=−1.125 cmh_i = m \cdot h_o = -0.25 \cdot 4.50\text{ cm} = -1.125\text{ cm}

    Correct

    hi=m⋅ho=(−0.500)(4.50 cm)=−2.25 cmh_i = m \cdot h_o = (-0.500)(4.50\text{ cm}) = -2.25\text{ cm}

    Your relationship hi=m⋅hoh_i = m \cdot h_o is correct, but the calculated height carried over the incorrect magnification.

  5. Step 5

    Since di>0 and m<0, the image is real and inverted.\text{Since } d_i > 0 \text{ and } m < 0\text{, the image is real and inverted.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the focal length from the mirror's radius of curvature.

You remembered to include the negative sign in the lateral magnification formula m=−didom = -\frac{d_i}{d_o}.

You correctly interpreted the physical signs to deduce that the image is real and inverted.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Isolation Error in Mirror Equation

You wrote 1di=1f+1do\frac{1}{d_i} = \frac{1}{f} + \frac{1}{d_o} instead of subtracting 1do\frac{1}{d_o}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the fundamental mirror formula 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} with the rearranged form used to isolate an unknown distance, leading to an accidental sum of reciprocals.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rearranging Reciprocal Equations
  • Starting from 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}, isolate an unknown distance by subtracting the known distance term: 1di=1f−1do\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o}.

  • Always write down the base equation 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} before isolating 1di\frac{1}{d_i}, checking that ff and did_i are on opposite sides of the minus sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. 1di=1f−1do=112.0 cm−136.0 cm=3−136.0 cm=236.0 cm=118.0 cm  ⟹  di=+18.0 cm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{1}{12.0\text{ cm}} - \frac{1}{36.0\text{ cm}} = \frac{3 - 1}{36.0\text{ cm}} = \frac{2}{36.0\text{ cm}} = \frac{1}{18.0\text{ cm}} \implies d_i = +18.0\text{ cm}

  2. m=−dido=−18.0 cm36.0 cm=−0.500m = -\frac{d_i}{d_o} = -\frac{18.0\text{ cm}}{36.0\text{ cm}} = -0.500

  3. hi=m⋅ho=(−0.500)(4.50 cm)=−2.25 cmh_i = m \cdot h_o = (-0.500)(4.50\text{ cm}) = -2.25\text{ cm}

Final answer

(a) f=+12.0 cmf = +12.0\text{ cm}; (b) di=+18.0 cmd_i = +18.0\text{ cm}; (c) m=−0.500m = -0.500; (d) hi=−2.25 cmh_i = -2.25\text{ cm}; the image is real and inverted.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables in reciprocal equations to reinforce subtraction when moving terms across the equals sign.

  • Check your image distance using physical intuition: for an object placed beyond the center of curvature (do>2fd_o > 2f), the image must form between FF and CC (f<di<2ff < d_i < 2f), so di=9.0 cm<12.0 cmd_i = 9.0\text{ cm} < 12.0\text{ cm} immediately signals an algebraic error.

Lock it in

Similar question

01

A concave mirror has a radius of curvature of R=30.0 cmR = 30.0\text{ cm}. An object of height 2.0 cm2.0\text{ cm} is placed 45.0 cm45.0\text{ cm} in front of the mirror. Find the focal length ff, image distance did_i, and image height hih_i.

Answer

f=+15.0 cmf = +15.0\text{ cm}, di=+22.5 cmd_i = +22.5\text{ cm}, hi=−1.0 cmh_i = -1.0\text{ cm}. Key steps: f=R/2=15.0 cmf = R/2 = 15.0\text{ cm}; 1di=115.0−145.0=245.0  ⟹  di=22.5 cm\frac{1}{d_i} = \frac{1}{15.0} - \frac{1}{45.0} = \frac{2}{45.0} \implies d_i = 22.5\text{ cm}; m=−22.545.0=−0.50m = -\frac{22.5}{45.0} = -0.50; hi=(−0.50)(2.0)=−1.0 cmh_i = (-0.50)(2.0) = -1.0\text{ cm}.

02

An upright candle of height 3.00 cm3.00\text{ cm} is placed 10.0 cm10.0\text{ cm} in front of a concave mirror with radius of curvature R=40.0 cmR = 40.0\text{ cm}. Determine the image position did_i, magnification mm, and whether the image is real or virtual.

Answer

di=−20.0 cmd_i = -20.0\text{ cm}, m=+2.00m = +2.00, virtual and upright. Key steps: f=R/2=+20.0 cmf = R/2 = +20.0\text{ cm}; 1di=120.0−110.0=−120.0  ⟹  di=−20.0 cm\frac{1}{d_i} = \frac{1}{20.0} - \frac{1}{10.0} = -\frac{1}{20.0} \implies d_i = -20.0\text{ cm}; m=−−20.010.0=+2.00m = -\frac{-20.0}{10.0} = +2.00.

03

A convex spherical rear-view mirror has a radius of curvature of magnitude ∣R∣=16.0 cm|R| = 16.0\text{ cm}. A car behind it is located at do=24.0 cmd_o = 24.0\text{ cm}. Calculate the focal length ff, the image distance did_i, and the magnification mm.

Answer

f=−8.00 cmf = -8.00\text{ cm}, di=−6.00 cmd_i = -6.00\text{ cm}, m=+0.250m = +0.250 (upright, virtual, reduced). Key steps: For convex mirrors, f=−∣R∣/2=−8.00 cmf = -|R|/2 = -8.00\text{ cm}; 1di=−18.00−124.0=−424.0=−16.00  ⟹  di=−6.00 cm\frac{1}{d_i} = -\frac{1}{8.00} - \frac{1}{24.0} = -\frac{4}{24.0} = -\frac{1}{6.00} \implies d_i = -6.00\text{ cm}; m=−−6.0024.0=+0.250m = -\frac{-6.00}{24.0} = +0.250.

Loading workspace…