Resources

A weather balloon ascends vertically at a steady velocity of +6.50 m/s+6.50\text{ m/s}. When it is 40.0 m40.0\text{ m} above the ground, a small sensor package is released from the balloon. Taking the upward direction as positive and using g=9.80 m/s2g = 9.80\text{ m/s}^2: (a) extract all known quantities, strictly enforcing the sign convention for initial position, initial velocity, acceleration, and final position upon hitting the ground; (b) identify the unknown representing the time elapsed before impact; and (c) calculate the total time the sensor package is in the air.

Answer and steps

Final answer

(a) Knowns: initial vertical position y0=+40.0 my_0 = +40.0\text{ m}, initial velocity v0y=+6.50 m/sv_{0y} = +6.50\text{ m/s}, acceleration ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2, final vertical position y=0 my = 0\text{ m} (giving vertical displacement Δy=−40.0 m\Delta y = -40.0\text{ m}); (b) Unknown: total fall time tt; (c) t=3.60 st = 3.60\text{ s}.

Steps

Part (a): Extracting Known Quantities with Sign Conventions

Establish a one-dimensional coordinate system with:

  • The ground as the origin (y=0 my = 0\text{ m}).
  • The upward direction chosen as positive (+y+y).
  1. Initial Position (y0y_0): The sensor is released when it is 40.0 m40.0\text{ m} above the ground: y0=+40.0 my_0 = +40.0\text{ m}
  2. Initial Velocity (v0yv_{0y}): An object released from a moving vehicle shares the velocity of that vehicle at the instant of release. Since the balloon is rising steadily at 6.50 m/s6.50\text{ m/s}: v0y=+6.50 m/sv_{0y} = +6.50\text{ m/s} (Common Pitfall: Do not assume an object dropped or released from a moving frame has an initial velocity of zero.)
  3. Acceleration (aya_y): Once released, the only force acting on the package is gravity, which acts vertically downward: ay=−g=−9.80 m/s2a_y = -g = -9.80\text{ m/s}^2
  4. Final Position (yy) and Displacement (Δy\Delta y): Upon striking the ground: y=0 my = 0\text{ m} The net displacement is: Δy=y−y0=0 m−40.0 m=−40.0 m\Delta y = y - y_0 = 0\text{ m} - 40.0\text{ m} = -40.0\text{ m}

Part (b): Identifying the Unknown

The desired target quantity is the total time elapsed from the moment of release until the sensor package impacts the ground: Unknown: t (flight time, in seconds)\text{Unknown: } t \text{ (flight time, in seconds)}


Part (c): Calculating the Total Time in the Air

Use the kinematic equation relating position, initial velocity, constant acceleration, and time: y=y0+v0yt+12ayt2y = y_0 + v_{0y}t + \frac{1}{2}a_y t^2

Substitute the known values into the equation: 0=40.0+6.50t+12(−9.80)t20 = 40.0 + 6.50t + \frac{1}{2}(-9.80)t^2

Simplify to standard quadratic form (At2+Bt+C=0A t^2 + B t + C = 0): 4.90t2−6.50t−40.0=04.90t^2 - 6.50t - 40.0 = 0

Solve for tt using the quadratic formula t=−B±B2−4AC2At = \frac{-B \pm \sqrt{B^2 - 4AC}}{2A}: t=−(−6.50)±(−6.50)2−4(4.90)(−40.0)2(4.90)t = \frac{-(-6.50) \pm \sqrt{(-6.50)^2 - 4(4.90)(-40.0)}}{2(4.90)}

Evaluate the discriminant: B2−4AC=42.25+784.0=826.25B^2 - 4AC = 42.25 + 784.0 = 826.25 826.25≈28.74 m/s\sqrt{826.25} \approx 28.74\text{ m/s}

Calculate the roots: t=6.50±28.749.80t = \frac{6.50 \pm 28.74}{9.80}

  • Positive root: t=6.50+28.749.80=35.249.80≈3.60 st = \frac{6.50 + 28.74}{9.80} = \frac{35.24}{9.80} \approx 3.60\text{ s}
  • Negative root: t=6.50−28.749.80=−2.27 st = \frac{6.50 - 28.74}{9.80} = -2.27\text{ s} (extraneous, representing time before release)

The sensor package remains in the air for t=3.60 st = 3.60\text{ s}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes that releasing an object from an ascending balloon means its initial velocity is zero rather than sharing the velocity of the balloon.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y0=+40.0 my_0 = +40.0\text{ m}, v0=0 m/sv_0 = 0\text{ m/s}, a=−9.80 m/s2a = -9.80\text{ m/s}^2, y=0 my = 0\text{ m}

    Correct

    y0=+40.0 my_0 = +40.0\text{ m}, v0y=+6.50 m/sv_{0y} = +6.50\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2, y=0 my = 0\text{ m}

    You correctly assigned signs and values for the positions and acceleration, but setting v0=0 m/sv_0 = 0\text{ m/s} is incorrect. An object released from a moving vehicle shares the vehicle's instantaneous velocity, so the package begins with an upward velocity of v0y=+6.50 m/sv_{0y} = +6.50\text{ m/s}.

  2. Step 2

    Unknown: t\text{Unknown: } t

  3. Step 3

    y=y0+v0t+(12)at2  ⟹  0=40.0+0−4.90t2y = y_0 + v_0 t + \left(\frac{1}{2}\right)at^2 \implies 0 = 40.0 + 0 - 4.90t^2

    Correct

    0=40.0+6.50t−4.90t20 = 40.0 + 6.50t - 4.90t^2

    You selected the appropriate kinematic equation relating position, velocity, acceleration, and time, but substituting v0=0 m/sv_0 = 0\text{ m/s} from Step 1 eliminated the linear term.

  4. Step 4

    4.90t2=40.0  ⟹  t2=8.16  ⟹  t=2.86 s4.90t^2 = 40.0 \implies t^2 = 8.16 \implies t = 2.86\text{ s}

    Correct

    4.90t2−6.50t−40.0=0  ⟹  t=6.50±(−6.50)2−4(4.90)(−40.0)2(4.90)  ⟹  t≈3.60 s4.90t^2 - 6.50t - 40.0 = 0 \implies t = \frac{6.50 \pm \sqrt{(-6.50)^2 - 4(4.90)(-40.0)}}{2(4.90)} \implies t \approx 3.60\text{ s}

    Your algebraic solving of your simplified equation was carried out correctly, but the result is inaccurate because it omitted the initial upward velocity term.

WHAT YOU DID WELL
Compliments from Your Teacher

You set up a consistent vertical coordinate system with the ground as the origin.

You assigned the correct signs to the initial position and gravitational acceleration.

You selected the correct kinematic equation linking displacement, acceleration, and time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Moving-Frame Initial Velocity Misconception

You treated 'released' as meaning 'dropped from rest', setting v0=0 m/sv_0 = 0\text{ m/s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the release of an object from a stationary platform with release from a moving frame. By inertia, an object released from a moving vehicle initially moves at the exact same velocity as the vehicle at that instant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Velocity of a Released Object
  • When an object is released from a moving carrier, vobject,0=vcarrierv_{\text{object}, 0} = v_{\text{carrier}}.

  • Always inspect whether the releasing body is in motion before assuming v0=0v_0 = 0.

Sign Convention on Initial Velocity
  • The sign of v0yv_{0y} must match the direction of the carrier's motion in your defined coordinate system.

  • Since the balloon ascends upward at +6.50 m/s+6.50\text{ m/s}, write v0y=+6.50 m/sv_{0y} = +6.50\text{ m/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. y=y0+v0yt+12ayt2y = y_0 + v_{0y}t + \frac{1}{2}a_y t^2

  2. 0=40.0+6.50t−4.90t20 = 40.0 + 6.50t - 4.90t^2

  3. 4.90t2−6.50t−40.0=04.90t^2 - 6.50t - 40.0 = 0

  4. t=−(−6.50)±(−6.50)2−4(4.90)(−40.0)2(4.90)=6.50±42.25+784.09.80t = \frac{-(-6.50) \pm \sqrt{(-6.50)^2 - 4(4.90)(-40.0)}}{2(4.90)} = \frac{6.50 \pm \sqrt{42.25 + 784.0}}{9.80}

  5. t=6.50±826.259.80=6.50+28.749.80≈3.60 st = \frac{6.50 \pm \sqrt{826.25}}{9.80} = \frac{6.50 + 28.74}{9.80} \approx 3.60\text{ s}

Final answer

t=3.60 st = 3.60\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review inertial reference frames and how an object inherits the velocity of its carrier.

  • Practice identifying keyword traps in word problems: 'released' or 'dropped' does not imply v0=0v_0 = 0 if the carrier is moving.

  • Solve quadratic kinematic equations using the quadratic formula whenever v0≠0v_0 \neq 0.

OverviewACEpath Teacher's Diagnosis

02 The student misassigns a positive sign to the acceleration due to gravity despite setting upward as the positive direction, causing the displacement to increase downward incorrectly.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    y0=+40.0 my_0 = +40.0\text{ m}, v0=+6.50 m/sv_0 = +6.50\text{ m/s}, a=+9.80 m/s2a = +9.80\text{ m/s}^2, y=0 my = 0\text{ m}

    Correct

    y0=+40.0 my_0 = +40.0\text{ m}, v0y=+6.50 m/sv_{0y} = +6.50\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2, y=0 my = 0\text{ m}

    You correctly determined the initial position, upward velocity, and final ground position. However, because upward is defined as the positive direction, gravity acts downward and must have a negative sign (a=−9.80 m/s2a = -9.80\text{ m/s}^2).

  2. Step 2

    Unknown: t\text{Unknown: } t

  3. Step 3

    y−y0=v0t+(12)at2  ⟹  −40.0=6.50t+4.90t2  ⟹  4.90t2+6.50t+40.0=0y - y_0 = v_0 t + \left(\frac{1}{2}\right)at^2 \implies -40.0 = 6.50t + 4.90t^2 \implies 4.90t^2 + 6.50t + 40.0 = 0

    Correct

    y−y0=v0yt+12ayt2  ⟹  −40.0=6.50t−4.90t2  ⟹  4.90t2−6.50t−40.0=0y - y_0 = v_{0y}t + \frac{1}{2}a_y t^2 \implies -40.0 = 6.50t - 4.90t^2 \implies 4.90t^2 - 6.50t - 40.0 = 0

    You correctly set up the position-time kinematic equation, but substituting a=+9.80 m/s2a = +9.80\text{ m/s}^2 led to an incorrect sign on the quadratic term.

  4. Step 4

    Discriminant=6.502−4(4.90)(40.0)=42.25−784=−741.75  ⟹  No real solution for time exists\text{Discriminant} = 6.50^2 - 4(4.90)(40.0) = 42.25 - 784 = -741.75 \implies \text{No real solution for time exists}

    Correct

    t=−(−6.50)±(−6.50)2−4(4.90)(−40.0)2(4.90)≈3.60 st = \frac{-(-6.50) \pm \sqrt{(-6.50)^2 - 4(4.90)(-40.0)}}{2(4.90)} \approx 3.60\text{ s}

    Your algebra followed consistently from your quadratic equation, but the sign error from Step 1 produced a negative discriminant instead of the physical flight time of 3.60 s3.60\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted the initial position y0=+40.0 my_0 = +40.0\text{ m} and recognized that the released package inherits the balloon's upward velocity v0=+6.50 m/sv_0 = +6.50\text{ m/s}.

You correctly recognized that the final vertical position is at ground level (y=0 my = 0\text{ m}), giving a net displacement of −40.0 m-40.0\text{ m}.

You selected the appropriate kinematic formula connecting displacement, initial velocity, acceleration, and time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error for gravitational acceleration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the magnitude of acceleration due to gravity as a positive quantity without orienting it relative to your chosen coordinate system, forgetting that a downward vector must be negative when upward is designated as positive.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Direction vs. Coordinate Axis
  • In 1D vertical kinematics, every vector quantity (yy, vv, aa) takes a positive sign if it points in the chosen positive direction and a negative sign if it points opposite.

  • Before writing numerical values, draw an axis showing the +y+y arrow; since gravity always pulls downward toward Earth's center, set ay=−g=−9.80 m/s2a_y = -g = -9.80\text{ m/s}^2 whenever +y+y points upward.

Sanity Check via Discriminant
  • A physical projectile launched above the ground must always reach the ground unless an upward force counteracts gravity.

  • If a free-fall impact problem yields a negative discriminant or complex roots, immediately re-check the signs of your acceleration and displacement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2 and Δy=−40.0 m\Delta y = -40.0\text{ m} into the kinematic equation: −40.0=6.50t+12(−9.80)t2-40.0 = 6.50t + \frac{1}{2}(-9.80)t^2

  2. Rearrange into standard quadratic form: 4.90t2−6.50t−40.0=04.90t^2 - 6.50t - 40.0 = 0

  3. Calculate the discriminant: D=(−6.50)2−4(4.90)(−40.0)=42.25+784.0=826.25D = (-6.50)^2 - 4(4.90)(-40.0) = 42.25 + 784.0 = 826.25

  4. Solve for tt using the quadratic formula: t=6.50±826.259.80=6.50±28.749.80t = \frac{6.50 \pm \sqrt{826.25}}{9.80} = \frac{6.50 \pm 28.74}{9.80}

  5. Discard the negative root t=−2.27 st = -2.27\text{ s} to obtain the positive physical time: t=3.60 st = 3.60\text{ s}

Final answer

t=3.60 st = 3.60\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch a vertical axis with an explicit positive arrow before listing knowns.

  • Verify that downward quantities (downward displacement, downward gravity) receive negative signs when +y+y is upward.

  • Practice solving 1D projectile problems with non-zero initial release velocities to build fluency with quadratic kinematic equations.

OverviewACEpath Teacher's Diagnosis

03 The student uses the displacement magnitude +40.0 m rather than -40.0 m when setting up the vertical displacement equation from the release point to the ground.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    y0=+40.0 m,  v0=+6.50 m/s,  a=−9.80 m/s2,  y=0 m;  Unknown: ty_0 = +40.0\text{ m},\; v_0 = +6.50\text{ m/s},\; a = -9.80\text{ m/s}^2,\; y = 0\text{ m};\; \text{Unknown: } t

  2. Step 2

    Δy=v0t+(12)at2  ⟹  40.0=6.50t−4.90t2\Delta y = v_0 t + \left(\frac{1}{2}\right)a t^2 \implies 40.0 = 6.50t - 4.90t^2

    Correct

    Δy=y−y0=0 m−40.0 m=−40.0 m  ⟹  −40.0=6.50t−4.90t2\Delta y = y - y_0 = 0\text{ m} - 40.0\text{ m} = -40.0\text{ m} \implies -40.0 = 6.50t - 4.90t^2

    Displacement is defined as final position minus initial position: Δy=y−y0=0 m−40.0 m=−40.0 m\Delta y = y - y_0 = 0\text{ m} - 40.0\text{ m} = -40.0\text{ m}. Because the sensor ends up 40.0 m40.0\text{ m} below its starting height, the displacement must be negative.

  3. Step 3

    4.90t2−6.50t+40.0=0  ⟹  t=6.50±42.25−7849.80  ⟹  No real solution for t4.90t^2 - 6.50t + 40.0 = 0 \implies t = \frac{6.50 \pm \sqrt{42.25 - 784}}{9.80} \implies \text{No real solution for } t

    Correct

    4.90t2−6.50t−40.0=0  ⟹  t=6.50±42.25+7849.80  ⟹  t≈3.60 s4.90t^2 - 6.50t - 40.0 = 0 \implies t = \frac{6.50 \pm \sqrt{42.25 + 784}}{9.80} \implies t \approx 3.60\text{ s}

    You executed the quadratic formula accurately based on your equation, but the positive constant term +40.0+40.0 caused the discriminant to become negative.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly assigned positive signs to the upward initial velocity and position, and a negative sign to the downward gravitational acceleration.

You clearly stated the target unknown variable representing time elapsed.

You chose the appropriate kinematic equation relating displacement, initial velocity, acceleration, and time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Displacement sign error in vertical kinematics

You substituted the position height magnitude +40.0 m+40.0\text{ m} in place of the signed vertical displacement Δy\Delta y.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute initial elevation y0y_0 with the net change in vertical position Δy=y−y0\Delta y = y - y_0, which is negative for an object that lands lower than where it started.

REASONING PATH
Your ACEpath teacher’s suggested approach
Displacement vs. Position
  • Δy=yfinal−yinitial\Delta y = y_{\text{final}} - y_{\text{initial}}

  • Always compute Δy\Delta y explicitly as y−y0y - y_0 before substituting it into Δy=v0t+12at2\Delta y = v_0 t + \frac{1}{2}a t^2.

Physical Reality Check
  • A falling object dropped or launched near Earth's surface must eventually reach the ground.

  • If your kinematic quadratic yields no real roots (a negative discriminant), re-check the signs of Δy\Delta y, v0v_0, and aa immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the signed displacement: Δy=y−y0=0 m−40.0 m=−40.0 m\Delta y = y - y_0 = 0\text{ m} - 40.0\text{ m} = -40.0\text{ m}.

  2. Substitute into the kinematic relation: −40.0=6.50t−4.90t2-40.0 = 6.50t - 4.90t^2.

  3. Rearrange to standard quadratic form: 4.90t2−6.50t−40.0=04.90t^2 - 6.50t - 40.0 = 0.

  4. Compute the discriminant: D=(−6.50)2−4(4.90)(−40.0)=42.25+784.0=826.25D = (-6.50)^2 - 4(4.90)(-40.0) = 42.25 + 784.0 = 826.25.

  5. Solve for the positive time root: t=6.50+826.252(4.90)=6.50+28.749.80≈3.60 st = \frac{6.50 + \sqrt{826.25}}{2(4.90)} = \frac{6.50 + 28.74}{9.80} \approx 3.60\text{ s}.

Final answer

t=3.60 st = 3.60\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice defining coordinate origins explicitly and calculating Δy=y−y0\Delta y = y - y_0 on paper before writing down kinematic formulas.

  • Solve vertical motion problems where release heights and landing heights differ to build confidence with negative displacements.

Lock it in

Similar question

01

A hot-air balloon descends vertically at a steady speed of 3.00 m/s3.00\text{ m/s}. At an altitude of 50.0 m50.0\text{ m}, a sandbag is released. Taking upward as positive and g=9.80 m/s2g = 9.80\text{ m/s}^2: (a) state y0y_0, v0yv_{0y}, and aya_y; (b) calculate the time required for the sandbag to reach the ground.

Answer

(a) y0=+50.0 my_0 = +50.0\text{ m}, v0y=−3.00 m/sv_{0y} = -3.00\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2. (b) Using 0=50.0−3.00t−4.90t20 = 50.0 - 3.00t - 4.90t^2, we solve 4.90t2+3.00t−50.0=04.90t^2 + 3.00t - 50.0 = 0. Applying the quadratic formula yields t=−3.00+9.00+980.09.80=−3.00+31.459.80≈2.90 st = \frac{-3.00 + \sqrt{9.00 + 980.0}}{9.80} = \frac{-3.00 + 31.45}{9.80} \approx 2.90\text{ s}.

02

A drone ascends vertically at 8.00 m/s8.00\text{ m/s}. At a height of 30.0 m30.0\text{ m}, a bolt detaches. Taking upward as positive and g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the maximum height above the ground reached by the bolt before it falls.

Answer

At the peak, vy=0v_y = 0. The initial velocity of the bolt is v0y=+8.00 m/sv_{0y} = +8.00\text{ m/s}. Using vy2=v0y2+2ay(ymax−y0)v_y^2 = v_{0y}^2 + 2a_y(y_{\text{max}} - y_0): 0=(8.00)2+2(−9.80)(ymax−30.0)0 = (8.00)^2 + 2(-9.80)(y_{\text{max}} - 30.0) 19.6(ymax−30.0)=64.0  ⟹  ymax−30.0=3.27 m19.6(y_{\text{max}} - 30.0) = 64.0 \implies y_{\text{max}} - 30.0 = 3.27\text{ m} ymax=33.27 m≈33.3 my_{\text{max}} = 33.27\text{ m} \approx 33.3\text{ m}.

03

An open elevator moves upward at a constant speed vv. When it is at height hh above the bottom of the shaft, a passenger accidentally drops a coin. If the coin hits the bottom of the shaft after time TT, express the elevator's speed vv in terms of hh, gg, and TT.

Answer

Taking upward as positive from the bottom of the shaft: y0=hy_0 = h, y=0y = 0, v0y=+vv_{0y} = +v, and ay=−ga_y = -g. The kinematic equation is 0=h+vT−12gT20 = h + vT - \frac{1}{2}gT^2. Rearranging to isolate vv gives: vT=12gT2−h  ⟹  v=12gT−hTvT = \frac{1}{2}gT^2 - h \implies v = \frac{1}{2}gT - \frac{h}{T}.

Loading workspace…