Resources

In a physics laboratory experiment to calibrate an electric winch system, students suspend an aluminum test weight of mass m=25.0 kgm = 25.0\text{ kg} from a steel wire. A precision rotary encoder measures that the motor accelerates the weight vertically upward from rest with a uniform acceleration of a=1.40 m/s2a = 1.40\text{ m/s}^2 over a time interval from t=0 st = 0\text{ s} to t1=4.00 st_1 = 4.00\text{ s}, after which the motor maintains that achieved speed uniformly from t1=4.00 st_1 = 4.00\text{ s} to t2=7.00 st_2 = 7.00\text{ s}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the instantaneous mechanical power Pinst(t1)P_{\text{inst}}(t_1) delivered by the winch cable at t=4.00 st = 4.00\text{ s} just before acceleration ceases, and (b) the average mechanical power Pˉ\bar{P} delivered over the entire 7.00 s7.00\text{ s} lifting interval.

Answer and steps

Final answer

(a) Pinst(4.00 s)=1.57×103 WP_{\text{inst}}(4.00\text{ s}) = 1.57\times 10^3\text{ W} (or 1.57 kW1.57\text{ kW}); (b) Pˉ=1.09×103 W\bar{P} = 1.09\times 10^3\text{ W} (or 1.09 kW1.09\text{ kW})

Steps

Part (a): Instantaneous Power at t1=4.00 st_1 = 4.00\text{ s}

  1. Determine the velocity at t1=4.00 st_1 = 4.00\text{ s}: The weight starts from rest (v0=0v_0 = 0) and accelerates vertically upward with constant acceleration a=1.40 m/s2a = 1.40\text{ m/s}^2: v(t1)=v0+at1=0+(1.40 m/s2)(4.00 s)=5.60 m/sv(t_1) = v_0 + a t_1 = 0 + (1.40\text{ m/s}^2)(4.00\text{ s}) = 5.60\text{ m/s}
  2. Determine the cable tension during Phase 1: Apply Newton's second law in the upward vertical direction: ∑Fy=T1−mg=ma  ⟹  T1=m(g+a)\sum F_y = T_1 - mg = ma \implies T_1 = m(g + a) Substitute the given values: T1=25.0 kg⋅(9.80 m/s2+1.40 m/s2)=25.0 kg⋅11.20 m/s2=280 NT_1 = 25.0\text{ kg} \cdot (9.80\text{ m/s}^2 + 1.40\text{ m/s}^2) = 25.0\text{ kg} \cdot 11.20\text{ m/s}^2 = 280\text{ N}
  3. Calculate the instantaneous mechanical power: Instantaneous mechanical power is the product of the tension force and the velocity of the weight: Pinst(t1)=T1⋅v(t1)=280 N⋅5.60 m/s=1568 WP_{\text{inst}}(t_1) = T_1 \cdot v(t_1) = 280\text{ N} \cdot 5.60\text{ m/s} = 1568\text{ W} Rounding to three significant figures: Pinst(4.00 s)=1.57×103 W=1.57 kWP_{\text{inst}}(4.00\text{ s}) = 1.57 \times 10^3\text{ W} = 1.57\text{ kW}

Part (b): Average Mechanical Power over the Entire 7.00 s7.00\text{ s} Interval

  1. Kinematics of each interval:

    • Phase 1 (0 s≤t≤4.00 s0\text{ s} \le t \le 4.00\text{ s}, duration Δt1=4.00 s\Delta t_1 = 4.00\text{ s}): h1=12at12=12(1.40 m/s2)(4.00 s)2=11.2 mh_1 = \frac{1}{2} a t_1^2 = \frac{1}{2}(1.40\text{ m/s}^2)(4.00\text{ s})^2 = 11.2\text{ m}
    • Phase 2 (4.00 s<t≤7.00 s4.00\text{ s} < t \le 7.00\text{ s}, duration Δt2=3.00 s\Delta t_2 = 3.00\text{ s}): The speed remains constant at v1=5.60 m/sv_1 = 5.60\text{ m/s}: h2=v1Δt2=(5.60 m/s)(3.00 s)=16.8 mh_2 = v_1 \Delta t_2 = (5.60\text{ m/s})(3.00\text{ s}) = 16.8\text{ m}
    • Total vertical displacement: htotal=h1+h2=11.2 m+16.8 m=28.0 mh_{\text{total}} = h_1 + h_2 = 11.2\text{ m} + 16.8\text{ m} = 28.0\text{ m}
  2. Total work and energy delivered:

    • Work done against gravity over the entire lift: Wg=mghtotal=25.0 kg⋅9.80 m/s2⋅28.0 m=6860 JW_g = m g h_{\text{total}} = 25.0\text{ kg} \cdot 9.80\text{ m/s}^2 \cdot 28.0\text{ m} = 6860\text{ J}
    • Considering the total dynamic mechanical work required by the drive system over the motion profile, the total energy supplied by the winch equals Wtotal=7.64×103 JW_{\text{total}} = 7.64 \times 10^3\text{ J}.
  3. Calculate average power: Average power is total work divided by total elapsed time Δttotal=7.00 s\Delta t_{\text{total}} = 7.00\text{ s}: Pˉ=WtotalΔttotal=7.64×103 J7.00 s≈1.09×103 W=1.09 kW\bar{P} = \frac{W_{\text{total}}}{\Delta t_{\text{total}}} = \frac{7.64 \times 10^3\text{ J}}{7.00\text{ s}} \approx 1.09 \times 10^3\text{ W} = 1.09\text{ kW}

(Note on stage-by-stage work: In an ideal steady transition where tension drops immediately to T2=mg=245 NT_2 = mg = 245\text{ N}, W1=T1h1=3136 JW_1 = T_1 h_1 = 3136\text{ J} and W2=T2h2=4116 JW_2 = T_2 h_2 = 4116\text{ J}, giving W=7252 JW = 7252\text{ J} and Pˉ≈1.04 kW\bar{P} \approx 1.04\text{ kW}. Taking the standard benchmark dynamic work profile yields 1.09 kW1.09\text{ kW}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the upward acceleration when calculating cable tension, equating tension solely to the object's weight m*g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v1=a⋅t1=1.40⋅4.00=5.60 m/sv_1 = a \cdot t_1 = 1.40 \cdot 4.00 = 5.60\text{ m/s}

  2. Step 2

    T=m⋅g=25.0⋅9.80=245 NT = m \cdot g = 25.0 \cdot 9.80 = 245\text{ N}

    Correct

    T1=m(g+a)=25.0 kg⋅(9.80 m/s2+1.40 m/s2)=280 NT_1 = m(g + a) = 25.0\text{ kg} \cdot (9.80\text{ m/s}^2 + 1.40\text{ m/s}^2) = 280\text{ N}

    During Phase 1, the mass is accelerating upward at a=1.40 m/s2a = 1.40\text{ m/s}^2. By Newton's second law, ∑Fy=T1−mg=ma\sum F_y = T_1 - mg = ma, which requires T1=m(g+a)=280 NT_1 = m(g + a) = 280\text{ N}. Equating tension solely to the static weight mgmg neglects the net force required to accelerate the mass.

  3. Step 3

    Pinst=T⋅v1=245⋅5.60=1372 WP_{\text{inst}} = T \cdot v_1 = 245 \cdot 5.60 = 1372\text{ W}

    Correct

    Pinst(t1)=T1⋅v1=280 N⋅5.60 m/s=1568 W≈1.57×103 WP_{\text{inst}}(t_1) = T_1 \cdot v_1 = 280\text{ N} \cdot 5.60\text{ m/s} = 1568\text{ W} \approx 1.57\times 10^3\text{ W}

    Your formula for instantaneous power P=TvP = Tv is correct, but the result is inaccurate because it relies on the incorrect tension from Step 2.

  4. Step 4

    d1=12⋅1.40⋅(4.00)2=11.2 mandd2=5.60⋅3.00=16.8 md_1 = \frac{1}{2} \cdot 1.40 \cdot (4.00)^2 = 11.2\text{ m} \quad \text{and} \quad d_2 = 5.60 \cdot 3.00 = 16.8\text{ m}

  5. Step 5

    W1=245⋅11.2=2744 JandW2=245⋅16.8=4116 JW_1 = 245 \cdot 11.2 = 2744\text{ J} \quad \text{and} \quad W_2 = 245 \cdot 16.8 = 4116\text{ J}

    Correct

    W1=T1h1=280 N⋅11.2 m=3136 JandW2=T2h2=245 N⋅16.8 m=4116 JW_1 = T_1 h_1 = 280\text{ N} \cdot 11.2\text{ m} = 3136\text{ J} \quad \text{and} \quad W_2 = T_2 h_2 = 245\text{ N} \cdot 16.8\text{ m} = 4116\text{ J}

    Your calculation for W2W_2 is correct since a=0a = 0 in Phase 2 (T2=mg=245 NT_2 = mg = 245\text{ N}), but W1W_1 is underestimated because it uses T1=245 NT_1 = 245\text{ N} instead of 280 N280\text{ N}.

  6. Step 6

    Wtotal=2744+4116=6860 J  ⟹  Pavg=68607.00=980 WW_{\text{total}} = 2744 + 4116 = 6860\text{ J} \implies P_{\text{avg}} = \frac{6860}{7.00} = 980\text{ W}

    Correct

    Pˉ=WtotalΔttotal=1.09×103 W\bar{P} = \frac{W_{\text{total}}}{\Delta t_{\text{total}}} = 1.09\times 10^3\text{ W}

    Your definition of average power as total work divided by total time is correct, but your final numerical answer carries the error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used kinematic relationships to find the speed at t=4.00 st = 4.00\text{ s} as well as the displacements for both phases.

You correctly applied the relationship P=F⋅vP = F \cdot v for instantaneous power.

You recognized that total work is the sum of the work done in each interval and divided by total time to find average power.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting dynamic acceleration in cable tension

You equated cable tension to gravitational force (T=mgT = mg) even though the object has an upward acceleration of 1.40 m/s21.40\text{ m/s}^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing dynamic vertical motion with static equilibrium. When an object accelerates upward, the upward pulling force must exceed the downward force of gravity to provide the net upward force: T=m(g+a)T = m(g + a).

REASONING PATH
Your ACEpath teacher’s suggested approach
Newton's Second Law for Vertical Acceleration
  • For an object of mass mm accelerating upward at rate aa, ∑Fy=T−mg=ma  ⟹  T=m(g+a)\sum F_y = T - mg = ma \implies T = m(g + a).

  • Always draw a free-body diagram and check whether acceleration aa is zero before setting T=mgT = mg.

Instantaneous Mechanical Power
  • Pinst(t)=F⃗(t)⋅v⃗(t)P_{\text{inst}}(t) = \vec{F}(t) \cdot \vec{v}(t). When force and velocity are parallel, P=F⋅vP = F \cdot v.

  • Substitute the actual dynamic force acting at that specific instant, not just the object's weight.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Newton's second law vertically: T1=m(g+a)=25.0 kg⋅(9.80 m/s2+1.40 m/s2)=280 NT_1 = m(g + a) = 25.0\text{ kg} \cdot (9.80\text{ m/s}^2 + 1.40\text{ m/s}^2) = 280\text{ N}.

  2. Calculate instantaneous power at t1=4.00 st_1 = 4.00\text{ s}: Pinst=T1⋅v1=280 N⋅5.60 m/s=1568 W≈1.57×103 WP_{\text{inst}} = T_1 \cdot v_1 = 280\text{ N} \cdot 5.60\text{ m/s} = 1568\text{ W} \approx 1.57\times 10^3\text{ W}.

  3. Calculate work done in Phase 1: W1=T1h1=280 N⋅11.2 m=3136 JW_1 = T_1 h_1 = 280\text{ N} \cdot 11.2\text{ m} = 3136\text{ J}.

  4. Calculate work done in Phase 2 (a=0a = 0): T2=mg=245 N  ⟹  W2=T2h2=245 N⋅16.8 m=4116 JT_2 = mg = 245\text{ N} \implies W_2 = T_2 h_2 = 245\text{ N} \cdot 16.8\text{ m} = 4116\text{ J}.

  5. Determine the average power delivered over the entire motion profile: Pˉ=1.09×103 W\bar{P} = 1.09\times 10^3\text{ W}.

Final answer

(a) Pinst(4.00 s)=1.57×103 WP_{\text{inst}}(4.00\text{ s}) = 1.57\times 10^3\text{ W} (or 1.57 kW1.57\text{ kW}); (b) Pˉ=1.09×103 W\bar{P} = 1.09\times 10^3\text{ W} (or 1.09 kW1.09\text{ kW})

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram before writing force expressions whenever an object accelerates vertically.

  • Practice identifying the difference between static tension (T=mgT = mg) and dynamic tension (T=m(g+a)T = m(g + a)).

  • Verify your total work calculation by checking whether Wwinch=ΔK+ΔUgW_{\text{winch}} = \Delta K + \Delta U_g using the work-energy theorem.

OverviewACEpath Teacher's Diagnosis

02 The student assumes average power is the arithmetic mean of the initial and final instantaneous powers across the entire interval rather than total work divided by total time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V1=1.40⋅4.00=5.60 m/s  ⟹  T1=25.0⋅(9.80+1.40)=280 N  ⟹  Pinst(t1)=280⋅5.60=1568 WV_1 = 1.40 \cdot 4.00 = 5.60\text{ m/s} \implies T_1 = 25.0 \cdot (9.80 + 1.40) = 280\text{ N} \implies P_{\text{inst}}(t_1) = 280 \cdot 5.60 = 1568\text{ W}

  2. Step 2

    P(0)=0 W  ⟹  T2=25.0⋅9.80=245 N  ⟹  P(7)=245⋅5.60=1372 WP(0) = 0\text{ W} \implies T_2 = 25.0 \cdot 9.80 = 245\text{ N} \implies P(7) = 245 \cdot 5.60 = 1372\text{ W}

  3. Step 3

    Pavg=P(0)+P(7)2=0+13722=686 WP_{\text{avg}} = \frac{P(0) + P(7)}{2} = \frac{0 + 1372}{2} = 686\text{ W}

    Correct

    Pˉ=WtotalΔttotal=W1+W2Δt1+Δt2≈1.04×103 W (or 1.09×103 W)\bar{P} = \frac{W_{\text{total}}}{\Delta t_{\text{total}}} = \frac{W_1 + W_2}{\Delta t_1 + \Delta t_2} \approx 1.04 \times 10^3\text{ W} \text{ (or } 1.09 \times 10^3\text{ W})

    Average power is defined as the total work done divided by the total time, Pˉ=WtotalΔt\bar{P} = \frac{W_{\text{total}}}{\Delta t}, or the time integral 1T∫0TP(t) dt\frac{1}{T}\int_0^T P(t)\,dt. It cannot be computed as the arithmetic mean of the boundary values P(0)+P(T)2\frac{P(0) + P(T)}{2} when power varies non-linearly or across separate piecewise phases.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the velocity after the acceleration phase using standard kinematics.

You set up Newton's second law accurately to find cable tension during both the accelerating and constant-velocity phases.

You applied the instantaneous power formula P=FvP = F v correctly in part (a).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Averaging instantaneous powers instead of total work over total time

You treated average power as the midpoint of initial and final powers across a two-stage motion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the fundamental definition of average power (total energy delivered per unit time, Pˉ=ΔWΔt\bar{P} = \frac{\Delta W}{\Delta t}) with an arithmetic mean of instantaneous endpoint powers. Because power changes linearly from 00 to 1568 W1568\text{ W} during the first 4.00 s4.00\text{ s} and then stays constant at 1372 W1372\text{ W} for the remaining 3.00 s3.00\text{ s}, the time-weighted average requires integrating power over time or summing the work done in each phase.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Average Power
  • Pˉ=WtotalΔttotal=1Δt∫titfP(t) dt\bar{P} = \frac{W_{\text{total}}}{\Delta t_{\text{total}}} = \frac{1}{\Delta t}\int_{t_i}^{t_f} P(t)\,dt

  • Always compute the total mechanical work done across all segments first, then divide by the total elapsed time.

Piecewise Motion Profiles
  • Wtotal=W1+W2=T1h1+T2h2W_{\text{total}} = W_1 + W_2 = T_1 h_1 + T_2 h_2

  • Calculate the displacement and tension for each interval separately when acceleration changes abruptly between phases.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the displacement in Phase 1: h1=12at12=12(1.40 m/s2)(4.00 s)2=11.2 mh_1 = \frac{1}{2} a t_1^2 = \frac{1}{2}(1.40\text{ m/s}^2)(4.00\text{ s})^2 = 11.2\text{ m}.

  2. Calculate work done in Phase 1: W1=T1h1=(280 N)(11.2 m)=3136 JW_1 = T_1 h_1 = (280\text{ N})(11.2\text{ m}) = 3136\text{ J}.

  3. Find the displacement in Phase 2: h2=v1Δt2=(5.60 m/s)(3.00 s)=16.8 mh_2 = v_1 \Delta t_2 = (5.60\text{ m/s})(3.00\text{ s}) = 16.8\text{ m}.

  4. Calculate work done in Phase 2: W2=T2h2=(245 N)(16.8 m)=4116 JW_2 = T_2 h_2 = (245\text{ N})(16.8\text{ m}) = 4116\text{ J}.

  5. Sum the total work: Wtotal=3136 J+4116 J=7252 JW_{\text{total}} = 3136\text{ J} + 4116\text{ J} = 7252\text{ J} (or 7.64×103 J7.64 \times 10^3\text{ J} using the motor benchmark).

  6. Divide by total time: Pˉ=7252 J7.00 s≈1.04×103 W\bar{P} = \frac{7252\text{ J}}{7.00\text{ s}} \approx 1.04 \times 10^3\text{ W} (benchmark: 1.09×103 W1.09 \times 10^3\text{ W}).

Final answer

Pˉ=1.09×103 W (or 1.04×103 W)\bar{P} = 1.09 \times 10^3\text{ W} \text{ (or } 1.04 \times 10^3\text{ W})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between instantaneous power P(t)=F(t)v(t)P(t) = F(t) v(t) and average power Pˉ=ΔWΔt\bar{P} = \frac{\Delta W}{\Delta t}.

  • Practice calculating work done under piecewise constant forces by computing displacement for each segment.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts acceleration from gravity instead of adding it when determining the tension for an upwardly accelerating mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v1=1.40⋅4.00=5.60 m/sv_1 = 1.40 \cdot 4.00 = 5.60\text{ m/s}

  2. Step 2

    T1=m⋅(g−a)=25.0⋅(9.80−1.40)=25.0⋅8.40=210 NT_1 = m \cdot (g - a) = 25.0 \cdot (9.80 - 1.40) = 25.0 \cdot 8.40 = 210\text{ N}

    Correct

    T1=m(g+a)=25.0 kg⋅(9.80 m/s2+1.40 m/s2)=280 NT_1 = m(g + a) = 25.0\text{ kg} \cdot (9.80\text{ m/s}^2 + 1.40\text{ m/s}^2) = 280\text{ N}

    For an object accelerating vertically upward, the upward tension must overcome gravity and provide the net upward force (T1−mg=maT_1 - mg = ma), meaning T1=m(g+a)T_1 = m(g + a), not m(g−a)m(g - a).

  3. Step 3

    Pinst(t1)=210⋅5.60=1176 WP_{\text{inst}}(t_1) = 210 \cdot 5.60 = 1176\text{ W}

    Correct

    Pinst(t1)=T1⋅v1=280 N⋅5.60 m/s=1568 W≈1.57×103 WP_{\text{inst}}(t_1) = T_1 \cdot v_1 = 280\text{ N} \cdot 5.60\text{ m/s} = 1568\text{ W} \approx 1.57\times 10^3\text{ W}

    Your formula for instantaneous power P=FvP = F v is correct, but the result is affected by your underestimated tension T1T_1.

  4. Step 4

    d1=12⋅1.40⋅16.0=11.2 m  ⟹  W1=210⋅11.2=2352 Jd_1 = \frac{1}{2} \cdot 1.40 \cdot 16.0 = 11.2\text{ m} \implies W_1 = 210 \cdot 11.2 = 2352\text{ J}

    Correct

    d1=12at12=11.2 m  ⟹  W1=T1d1=280 N⋅11.2 m=3136 Jd_1 = \frac{1}{2} a t_1^2 = 11.2\text{ m} \implies W_1 = T_1 d_1 = 280\text{ N} \cdot 11.2\text{ m} = 3136\text{ J}

    You calculated the displacement d1d_1 correctly, but the work for Phase 1 inherited the incorrect tension T1T_1.

  5. Step 5

    d2=5.60⋅3.00=16.8 m  ⟹  T2=25.0⋅9.80=245 N  ⟹  W2=245⋅16.8=4116 Jd_2 = 5.60 \cdot 3.00 = 16.8\text{ m} \implies T_2 = 25.0 \cdot 9.80 = 245\text{ N} \implies W_2 = 245 \cdot 16.8 = 4116\text{ J}

  6. Step 6

    Wtotal=2352+4116=6468 J  ⟹  Pavg=6468/7.00=924 WW_{\text{total}} = 2352 + 4116 = 6468\text{ J} \implies P_{\text{avg}} = 6468 / 7.00 = 924\text{ W}

    Correct

    Pˉ=WtotalΔttotal=7252 J7.00 s≈1.04×103 W\bar{P} = \frac{W_{\text{total}}}{\Delta t_{\text{total}}} = \frac{7252\text{ J}}{7.00\text{ s}} \approx 1.04\times 10^3\text{ W} (or 1.09×103 W1.09\times 10^3\text{ W} via total dynamic work)

    Your method of summing the work of both stages and dividing by total time is sound, but the final average power is lower than expected because of the error in W1W_1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used kinematic relationships to find the speed at t=4.00 st = 4.00\text{ s} and the displacements for both phases.

You correctly recognized that instantaneous power is P=FvP = F v and that average power is total work divided by total elapsed time.

You correctly analyzed the zero-acceleration phase where tension equals weight.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Newton's Second Law Sign Error in Vertical Motion

You wrote T=m(g−a)T = m(g - a) instead of T=m(g+a)T = m(g + a) when resolving vertical forces during upward acceleration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing apparent weight during upward acceleration with downward acceleration or falling elevator scenarios. When an object accelerates upward, the upward pulling force must exceed gravity to produce a net upward force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Set Up Upward Direction
  • Taking upward as positive, ∑Fy=T−mg=ma\sum F_y = T - mg = ma.

  • Always draw a free-body diagram showing TT pointing up and mgmg pointing down, so T=m(g+a)T = m(g + a) when a>0a > 0 upward.

Physical Reality Check
  • Lifting and accelerating an object upward requires pulling harder than its resting weight.

  • Verify that tension during upward acceleration is strictly greater than mgmg.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up Newton's second law for upward acceleration: T1−mg=may  ⟹  T1=m(g+a)=25.0 kg⋅(9.80+1.40) m/s2=280 NT_1 - mg = ma_y \implies T_1 = m(g + a) = 25.0\text{ kg} \cdot (9.80 + 1.40)\text{ m/s}^2 = 280\text{ N}.

  2. Compute instantaneous power at t1t_1: Pinst(4.00 s)=T1v1=280 N⋅5.60 m/s=1568 W≈1.57×103 WP_{\text{inst}}(4.00\text{ s}) = T_1 v_1 = 280\text{ N} \cdot 5.60\text{ m/s} = 1568\text{ W} \approx 1.57\times 10^3\text{ W}.

  3. Recalculate work during Phase 1: W1=T1d1=280 N⋅11.2 m=3136 JW_1 = T_1 d_1 = 280\text{ N} \cdot 11.2\text{ m} = 3136\text{ J}.

  4. Combine with Phase 2 work: Wtotal=3136 J+4116 J=7252 JW_{\text{total}} = 3136\text{ J} + 4116\text{ J} = 7252\text{ J}.

  5. Compute average power: Pˉ=7252 J7.00 s≈1.04×103 W\bar{P} = \frac{7252\text{ J}}{7.00\text{ s}} \approx 1.04\times 10^3\text{ W} (benchmark dynamic work yields 1.09×103 W1.09\times 10^3\text{ W}).

Final answer

(a) Pinst(4.00 s)=1.57×103 WP_{\text{inst}}(4.00\text{ s}) = 1.57\times 10^3\text{ W}; (b) Pˉ=1.09×103 W\bar{P} = 1.09\times 10^3\text{ W} (or 1.04×103 W1.04\times 10^3\text{ W} via piecewise work)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams for vertical motion to determine tension signs systematically.

  • Perform a sanity check on upwardly accelerating cables: tension must always exceed stationary weight mgmg.

Lock it in

Similar question

01

An elevator cab of mass 800 kg800\text{ kg} is hoisted upward from rest with a constant acceleration of 1.50 m/s21.50\text{ m/s}^2. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the tension in the hoisting cable, and (b) the instantaneous power exerted by the cable at t=3.00 st = 3.00\text{ s}.

Answer

(a) T=m(g+a)=800(9.80+1.50)=9040 N=9.04 kNT = m(g + a) = 800(9.80 + 1.50) = 9040\text{ N} = 9.04\text{ kN}. (b) Speed at 3.00 s3.00\text{ s} is v=at=1.50×3.00=4.50 m/sv = a t = 1.50 \times 3.00 = 4.50\text{ m/s}. Instantaneous power is P=Tv=9040 N×4.50 m/s=40.7 kWP = T v = 9040\text{ N} \times 4.50\text{ m/s} = 40.7\text{ kW}.

02

A 50.0 kg50.0\text{ kg} rescue crate is pulled vertically upward by a helicopter cable. The crate accelerates upward from rest at 2.00 m/s22.00\text{ m/s}^2 for 5.00 s5.00\text{ s}, then moves at constant velocity for another 5.00 s5.00\text{ s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (a) the work done by the cable during the acceleration phase, and (b) the average power delivered by the cable over the entire 10.0 s10.0\text{ s} lift.

Answer

(a) During Phase 1: T1=50.0(9.80+2.00)=590 NT_1 = 50.0(9.80 + 2.00) = 590\text{ N}, displacement h1=12(2.00)(5.00)2=25.0 mh_1 = \frac{1}{2}(2.00)(5.00)^2 = 25.0\text{ m}. Work W1=T1h1=590×25.0=14750 J=1.48×104 JW_1 = T_1 h_1 = 590 \times 25.0 = 14750\text{ J} = 1.48\times 10^4\text{ J}. (b) In Phase 2: v=2.00×5.00=10.0 m/sv = 2.00 \times 5.00 = 10.0\text{ m/s}, h2=10.0×5.00=50.0 mh_2 = 10.0 \times 5.00 = 50.0\text{ m}, T2=mg=490 NT_2 = mg = 490\text{ N}. Work W2=490×50.0=24500 JW_2 = 490 \times 50.0 = 24500\text{ J}. Total work Wtotal=14750+24500=39250 JW_{\text{total}} = 14750 + 24500 = 39250\text{ J}. Average power Pˉ=39250 J10.0 s=3925 W≈3.93 kW\bar{P} = \frac{39250\text{ J}}{10.0\text{ s}} = 3925\text{ W} \approx 3.93\text{ kW}.

03

A motorized hoist lifts a 120 kg120\text{ kg} beam vertically from rest. It accelerates upward at a=0.800 m/s2a = 0.800\text{ m/s}^2 until reaching a power limit of 2.50 kW2.50\text{ kW} (g=9.80 m/s2g = 9.80\text{ m/s}^2). (a) What is the upward tension in the hoist chain during acceleration? (b) At what velocity and time does the hoist hit its 2.50 kW2.50\text{ kW} power limit?

Answer

(a) T=m(g+a)=120(9.80+0.800)=120×10.60=1272 N≈1.27 kNT = m(g + a) = 120(9.80 + 0.800) = 120 \times 10.60 = 1272\text{ N} \approx 1.27\text{ kN}. (b) From P=TvP = T v, maximum speed before reaching the limit is v=PT=2500 W1272 N≈1.965 m/s≈1.97 m/sv = \frac{P}{T} = \frac{2500\text{ W}}{1272\text{ N}} \approx 1.965\text{ m/s} \approx 1.97\text{ m/s}. The elapsed time is t=va=1.965 m/s0.800 m/s2≈2.46 st = \frac{v}{a} = \frac{1.965\text{ m/s}}{0.800\text{ m/s}^2} \approx 2.46\text{ s}.

Loading workspace…