Resources

A small laboratory cart of mass m1=750 gm_1 = 750\text{ g} travels along a smooth horizontal track. It is attached via a lightweight nylon thread over an instrumented pulley to a hanging brass weight of mass m2=250 gm_2 = 250\text{ g}. A magnetic braking strip applies a constant retarding resistance force of fr=650 mNf_r = 650\text{ mN} on the cart. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (a) the linear acceleration aa of the system in m/s2\text{m/s}^2, and (b) the tension TT in the thread in N\text{N}.

Answer and steps

Final answer

(a) a=1.80 m/s2a = 1.80\text{ m/s}^2; (b) T=2.00 NT = 2.00\text{ N}

Steps

01

Convert all quantities to standard SI units

Before writing the equations of motion, convert each given quantity into base SI units (kg\text{kg}, N\text{N}, m/s2\text{m/s}^2):

  • Mass of the cart:
    m1=750 g=0.750 kgm_1 = 750\text{ g} = 0.750\text{ kg}
  • Mass of the hanging weight:
    m2=250 g=0.250 kgm_2 = 250\text{ g} = 0.250\text{ kg}
  • Retarding resistance force:
    fr=650 mN=650×10−3 N=0.650 Nf_r = 650\text{ mN} = 650 \times 10^{-3}\text{ N} = 0.650\text{ N}
  • Acceleration due to gravity:
    g=9.80 m/s2g = 9.80\text{ m/s}^2

02

Set up Newton's second law for each body

Because the thread is light and inextensible, both masses move with the same magnitude of acceleration aa, and the tension TT is uniform throughout the thread.

  1. For the hanging mass m2m_2 (moving downward):
    The downward gravitational force m2gm_2 g accelerates the mass, while the upward tension TT opposes it: m2g−T=m2a— (Equation 1)m_2 g - T = m_2 a \quad \text{--- (Equation 1)}
  2. For the cart m1m_1 (moving horizontally to the right):
    The tension TT pulls the cart forward, while the magnetic retarding force frf_r acts in the opposite direction: T−fr=m1a— (Equation 2)T - f_r = m_1 a \quad \text{--- (Equation 2)}

(Common pitfall: Forgetting to include the mass of the cart in the total system mass, or treating the tension as simply equal to the weight of the hanging mass m2gm_2 g, which only holds if the system is in static equilibrium).


03

Solve for the acceleration aa

Add Equation 1 and Equation 2 to eliminate the internal tension force TT:

(m2g−T)+(T−fr)=m2a+m1a(m_2 g - T) + (T - f_r) = m_2 a + m_1 a

m2g−fr=(m1+m2)am_2 g - f_r = (m_1 + m_2) a

Substitute the numerical values:

m2g=0.250 kg⋅9.80 m/s2=2.45 Nm_2 g = 0.250\text{ kg} \cdot 9.80\text{ m/s}^2 = 2.45\text{ N}

2.45 N−0.650 N=(0.750 kg+0.250 kg)a2.45\text{ N} - 0.650\text{ N} = (0.750\text{ kg} + 0.250\text{ kg}) a

1.80 N=(1.000 kg)a1.80\text{ N} = (1.000\text{ kg}) a

a=1.80 N1.000 kg=1.80 m/s2a = \frac{1.80\text{ N}}{1.000\text{ kg}} = 1.80\text{ m/s}^2


04

Solve for the tension TT

Substitute the calculated acceleration a=1.80 m/s2a = 1.80\text{ m/s}^2 into Equation 1:

T=m2g−m2a=m2(g−a)T = m_2 g - m_2 a = m_2(g - a)

T=0.250 kg⋅(9.80 m/s2−1.80 m/s2)T = 0.250\text{ kg} \cdot (9.80\text{ m/s}^2 - 1.80\text{ m/s}^2)

T=0.250 kg⋅8.00 m/s2=2.00 NT = 0.250\text{ kg} \cdot 8.00\text{ m/s}^2 = 2.00\text{ N}

(Verification using Equation 2: T=m1a+fr=0.750⋅1.80+0.650=1.35+0.650=2.00 NT = m_1 a + f_r = 0.750 \cdot 1.80 + 0.650 = 1.35 + 0.650 = 2.00\text{ N}. Both equations yield the exact same result).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the retarding force from millinewtons to newtons, treating 650 mN as 650 N or misinterpreting the prefix.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m1=0.750 kg,  m2=0.250 kg  ⟹  fr=6.50 Nm_1 = 0.750\text{ kg},\; m_2 = 0.250\text{ kg} \implies f_r = 6.50\text{ N}

    Correct

    m1=0.750 kg,  m2=0.250 kg,  fr=0.650 Nm_1 = 0.750\text{ kg},\; m_2 = 0.250\text{ kg},\; f_r = 0.650\text{ N}

    You correctly converted the masses from grams to kilograms, but you incorrectly converted fr=650 mNf_r = 650\text{ mN} to 6.50 N6.50\text{ N} instead of 0.650 N0.650\text{ N}. The metric prefix milli- represents 10−310^{-3}, so 650 mN=650×10−3 N=0.650 N650\text{ mN} = 650 \times 10^{-3}\text{ N} = 0.650\text{ N}.

  2. Step 2

    Fnet=m2g−fr=0.250(9.80)−6.50=−4.05 N  ⟹  a=Fnetm1+m2=−4.051.00=−4.05 m/s2F_{\text{net}} = m_2 g - f_r = 0.250(9.80) - 6.50 = -4.05\text{ N} \implies a = \frac{F_{\text{net}}}{m_1 + m_2} = \frac{-4.05}{1.00} = -4.05\text{ m/s}^2

    Correct

    Fnet=m2g−fr=2.45−0.650=1.80 N  ⟹  a=1.80 N1.00 kg=1.80 m/s2F_{\text{net}} = m_2 g - f_r = 2.45 - 0.650 = 1.80\text{ N} \implies a = \frac{1.80\text{ N}}{1.00\text{ kg}} = 1.80\text{ m/s}^2

    Your application of Newton's second law for the connected system is structurally correct, but this step is affected by substituting fr=6.50 Nf_r = 6.50\text{ N}.

  3. Step 3

    m2g−T=m2a  ⟹  T=m2(g−a)=0.250(9.80−(−4.05))=3.46 Nm_2 g - T = m_2 a \implies T = m_2(g - a) = 0.250(9.80 - (-4.05)) = 3.46\text{ N}

    Correct

    m2g−T=m2a  ⟹  T=m2(g−a)=0.250(9.80−1.80)=2.00 Nm_2 g - T = m_2 a \implies T = m_2(g - a) = 0.250(9.80 - 1.80) = 2.00\text{ N}

    Your free-body equation for the hanging mass is set up properly, but the resulting tension is affected by the incorrect value of acceleration from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted both masses from grams to kilograms.

You correctly formulated Newton's second law for the combined system to isolate the acceleration.

You accurately set up the equation of motion for the hanging mass to solve for the thread tension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
SI Prefix Conversion Error

You divided 650 mN650\text{ mN} by 100100 instead of 10001000, writing 6.50 N6.50\text{ N} instead of 0.650 N0.650\text{ N}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the factor of the milli- prefix (10−310^{-3}, divide by 10001000) with centi- (10−210^{-2}, divide by 100100).

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Check
  • 1 mN=10−3 N=11000 N1\text{ mN} = 10^{-3}\text{ N} = \frac{1}{1000}\text{ N}

  • Whenever you see the prefix 'm' (milli-), shift the decimal point three places to the left (650.0→0.650650.0 \to 0.650).

Physical Sanity Check
  • If the system starts from rest, a passive resistive force cannot exceed the driving force and cause reverse motion.

  • Notice that m2g=2.45 Nm_2 g = 2.45\text{ N}; a negative net force (−4.05 N-4.05\text{ N}) suggests that resistance alone would pull the cart backward, which is physically impossible for a retarding friction or braking force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the retarding force using the milli- factor: fr=650×10−3 N=0.650 Nf_r = 650 \times 10^{-3}\text{ N} = 0.650\text{ N}.

  2. Calculate the net driving force: Fnet=m2g−fr=0.250(9.80)−0.650=2.45−0.650=1.80 NF_{\text{net}} = m_2 g - f_r = 0.250(9.80) - 0.650 = 2.45 - 0.650 = 1.80\text{ N}.

  3. Compute the system acceleration: a=Fnetm1+m2=1.80 N0.750 kg+0.250 kg=1.80 m/s2a = \frac{F_{\text{net}}}{m_1 + m_2} = \frac{1.80\text{ N}}{0.750\text{ kg} + 0.250\text{ kg}} = 1.80\text{ m/s}^2.

  4. Substitute aa back into the hanging mass equation: T=m2(g−a)=0.250(9.80−1.80)=0.250(8.00)=2.00 NT = m_2(g - a) = 0.250(9.80 - 1.80) = 0.250(8.00) = 2.00\text{ N}.

Final answer

(a) a=1.80 m/s2a = 1.80\text{ m/s}^2; (b) T=2.00 NT = 2.00\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard SI metric prefixes: milli- (10−310^{-3}), micro- (10−610^{-6}), and centi- (10−210^{-2}).

  • Perform a physical plausibility check whenever you obtain a negative acceleration for a system driven from rest by gravity.

OverviewACEpath Teacher's Diagnosis

02 The student divides the net driving force by only the cart's mass instead of the total system mass when finding acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m1=0.750 kg, m2=0.250 kg, fr=0.650 N  ⟹  Fnet=m2g−fr=0.250(9.80)−0.650=2.45−0.650=1.80 Nm_1 = 0.750\text{ kg},\ m_2 = 0.250\text{ kg},\ f_r = 0.650\text{ N} \implies F_{\text{net}} = m_2 g - f_r = 0.250(9.80) - 0.650 = 2.45 - 0.650 = 1.80\text{ N}

  2. Step 2

    a=Fnetm1=1.800.750=2.40 m/s2a = \frac{F_{\text{net}}}{m_1} = \frac{1.80}{0.750} = 2.40\text{ m/s}^2

    Correct

    a=Fnetm1+m2=1.80 N0.750 kg+0.250 kg=1.80 m/s2a = \frac{F_{\text{net}}}{m_1 + m_2} = \frac{1.80\text{ N}}{0.750\text{ kg} + 0.250\text{ kg}} = 1.80\text{ m/s}^2

    Because the cart and the hanging weight are connected by an inextensible string, both masses accelerate together at the same rate. Therefore, the net external force accelerates the combined system mass m1+m2m_1 + m_2, not just m1m_1.

  3. Step 3

    m2g−T=m2a  ⟹  T=m2(g−a)=0.250(9.80−2.40)=0.250(7.40)=1.85 Nm_2 g - T = m_2 a \implies T = m_2(g - a) = 0.250(9.80 - 2.40) = 0.250(7.40) = 1.85\text{ N}

    Correct

    T=m2(g−a)=0.250(9.80−1.80)=2.00 NT = m_2(g - a) = 0.250(9.80 - 1.80) = 2.00\text{ N}

    Your equation of motion for the hanging mass and your algebraic rearrangement for tension were completely correct, but substituting your incorrect acceleration value of 2.40 m/s22.40\text{ m/s}^2 led to an incorrect tension.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all masses and forces to standard SI units accurately.

You correctly calculated the net external force driving the system as m2g−fr=1.80 Nm_2 g - f_r = 1.80\text{ N}.

You set up the correct Newton's second law relation for the hanging mass to solve for tension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted hanging mass from system inertia

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the net force as accelerating only the cart along the horizontal track, overlooking that the hanging mass is rigidly tied to the cart and must accelerate at the exact same rate, requiring the total system mass m1+m2m_1 + m_2 in Newton's second law.

REASONING PATH
Your ACEpath teacher’s suggested approach
System Inertia for Connected Bodies
  • For bodies connected by a taut, inextensible string, the net external driving force accelerates all connected masses: Fnet, ext=(∑m)aF_{\text{net, ext}} = (\sum m) a.

  • Always identify every mass that moves when the system moves and sum them up before dividing by total mass to find acceleration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the net external force equal to total system mass times acceleration: Fnet=(m1+m2)aF_{\text{net}} = (m_1 + m_2)a.

  2. Solve for aa: a=1.80 N0.750 kg+0.250 kg=1.801.000=1.80 m/s2a = \frac{1.80\text{ N}}{0.750\text{ kg} + 0.250\text{ kg}} = \frac{1.80}{1.000} = 1.80\text{ m/s}^2.

  3. Substitute a=1.80 m/s2a = 1.80\text{ m/s}^2 into T=m2(g−a)T = m_2(g - a): T=0.250(9.80−1.80)=0.250(8.00)=2.00 NT = 0.250(9.80 - 1.80) = 0.250(8.00) = 2.00\text{ N}.

Final answer

(a) a=1.80 m/s2a = 1.80\text{ m/s}^2; (b) T=2.00 NT = 2.00\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing a single dotted boundary around the entire connected system to clearly see which forces are internal (tension cancels out) and which masses form the total inertia.

  • Verify your tension value by checking it against the cart's horizontal equation: T=m1a+frT = m_1 a + f_r.

OverviewACEpath Teacher's Diagnosis

03 The student assumes the tension in the thread equals the static weight of the hanging mass, neglecting its downward acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m1=0.750 kg, m2=0.250 kg, fr=0.650 N  ⟹  Fnet=m2g−fr=0.250(9.80)−0.650=1.80 N  ⟹  mtotal=0.750+0.250=1.00 kg  ⟹  a=1.801.00=1.80 m/s2m_1 = 0.750\text{ kg},\ m_2 = 0.250\text{ kg},\ f_r = 0.650\text{ N} \implies F_{\text{net}} = m_2 g - f_r = 0.250(9.80) - 0.650 = 1.80\text{ N} \implies m_{\text{total}} = 0.750 + 0.250 = 1.00\text{ kg} \implies a = \frac{1.80}{1.00} = 1.80\text{ m/s}^2

  2. Step 2

    T=m2g  ⟹  T=0.250(9.80)=2.45 NT = m_2 g \implies T = 0.250(9.80) = 2.45\text{ N}

    Correct

    m2g−T=m2a  ⟹  T=m2(g−a)=0.250(9.80−1.80)=2.00 Nm_2 g - T = m_2 a \implies T = m_2(g - a) = 0.250(9.80 - 1.80) = 2.00\text{ N}

    You assumed the tension equals the static weight of the hanging mass. Because the mass is accelerating downward at a=1.80 m/s2a = 1.80\text{ m/s}^2, the downward gravity force must exceed the upward tension, giving m2g−T=m2am_2 g - T = m_2 a.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted all quantities into base SI units (0.750 kg0.750\text{ kg}, 0.250 kg0.250\text{ kg}, and 0.650 N0.650\text{ N}).

You correctly identified the net driving force on the system as the difference between the hanging weight and the retarding resistance.

You accurately calculated the total mass and linear acceleration of the system.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Static equilibrium assumption for accelerating body

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the string tension equals the static weight of the hanging object (T=m2gT = m_2 g), overlooking that an accelerating body has a nonzero net force (Fnet=m2aF_{\text{net}} = m_2 a) requiring T<m2gT < m_2 g when accelerating downward.

REASONING PATH
Your ACEpath teacher’s suggested approach
Apply Newton's Second Law to an Isolated Body
  • For a body of mass mm accelerating downward with acceleration aa, the equation of motion is mg−T=mam g - T = m a, which yields T=m(g−a)T = m(g - a).

  • Isolate the hanging mass with a free-body diagram and write the net force equation along its direction of acceleration before solving for tension.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law for the hanging mass m2m_2 moving downward: m2g−T=m2am_2 g - T = m_2 a.

  2. Rearrange for tension: T=m2(g−a)T = m_2(g - a).

  3. Substitute m2=0.250 kgm_2 = 0.250\text{ kg}, g=9.80 m/s2g = 9.80\text{ m/s}^2, and a=1.80 m/s2a = 1.80\text{ m/s}^2: T=0.250(9.80−1.80)=0.250×8.00=2.00 NT = 0.250(9.80 - 1.80) = 0.250 \times 8.00 = 2.00\text{ N}.

  4. Alternatively, verify using the cart m1m_1: T−fr=m1a  ⟹  T=0.750(1.80)+0.650=1.35+0.650=2.00 NT - f_r = m_1 a \implies T = 0.750(1.80) + 0.650 = 1.35 + 0.650 = 2.00\text{ N}.

Final answer

(a) a=1.80 m/s2a = 1.80\text{ m/s}^2; (b) T=2.00 NT = 2.00\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw an isolated free-body diagram for each connected object rather than assuming tension equals weight.

  • Check that tension is less than the hanging weight (T<mgT < m g) whenever the hanging mass accelerates downward.

Lock it in

Similar question

01

A toy car of mass m=400 gm = 400\text{ g} experiences an aerodynamic drag force of Fd=240 mNF_d = 240\text{ mN}. Find its deceleration when coasting on a frictionless horizontal floor.

Answer

a=0.60 m/s2a = 0.60\text{ m/s}^2 (in the direction opposing motion). Key steps: m=0.400 kgm = 0.400\text{ kg}, Fd=0.240 NF_d = 0.240\text{ N}. a=Fdm=0.240 N0.400 kg=0.60 m/s2a = \frac{F_d}{m} = \frac{0.240\text{ N}}{0.400\text{ kg}} = 0.60\text{ m/s}^2.

02

A glider of mass m1=600 gm_1 = 600\text{ g} on an air track is pulled by a hanging mass m2=150 gm_2 = 150\text{ g} over a pulley. An eddy-current brake applies a constant retarding force of fr=300 mNf_r = 300\text{ mN} to the glider. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the acceleration aa of the system.

Answer

a=1.56 m/s2a = 1.56\text{ m/s}^2. Key steps: m1=0.600 kgm_1 = 0.600\text{ kg}, m2=0.150 kgm_2 = 0.150\text{ kg}, fr=0.300 Nf_r = 0.300\text{ N}. Fnet=m2g−fr=0.150(9.80)−0.300=1.47−0.300=1.17 NF_{\text{net}} = m_2 g - f_r = 0.150(9.80) - 0.300 = 1.47 - 0.300 = 1.17\text{ N}. a=1.17 N0.600 kg+0.150 kg=1.170.750=1.56 m/s2a = \frac{1.17\text{ N}}{0.600\text{ kg} + 0.150\text{ kg}} = \frac{1.17}{0.750} = 1.56\text{ m/s}^2.

03

In an experiment with two connected masses (m1=800 gm_1 = 800\text{ g} on a table, m2=200 gm_2 = 200\text{ g} hanging), friction exerts fr=450 mNf_r = 450\text{ mN} on m1m_1. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find both the acceleration aa of the system and the tension TT in the connecting string.

Answer

a=1.51 m/s2a = 1.51\text{ m/s}^2, T=1.66 NT = 1.66\text{ N}. Key steps: m1=0.800 kgm_1 = 0.800\text{ kg}, m2=0.200 kgm_2 = 0.200\text{ kg}, fr=0.450 Nf_r = 0.450\text{ N}. Fnet=0.200(9.80)−0.450=1.96−0.450=1.51 NF_{\text{net}} = 0.200(9.80) - 0.450 = 1.96 - 0.450 = 1.51\text{ N}. a=1.511.000=1.51 m/s2a = \frac{1.51}{1.000} = 1.51\text{ m/s}^2. T=m2(g−a)=0.200(9.80−1.51)=0.200(8.29)=1.66 NT = m_2(g - a) = 0.200(9.80 - 1.51) = 0.200(8.29) = 1.66\text{ N}.

Loading workspace…