Resources
A light ray travels within a dense flint glass prism () toward an interface with air () at an incident angle of , which exceeds the critical angle. A student expects that pouring water () onto the outer surface will increase the extent of total internal reflection because water is denser than air. Evaluate this claim quantitatively: determine the critical angle for the glass-air interface and the critical angle for the glass-water interface, and state whether total internal reflection still occurs at after water is added.
Answer and steps
Final answer
; ; since , total internal reflection is frustrated/eliminated upon adding water, and a refracted beam transmits into the water at an angle of to the normal.
Steps
Condition for Total Internal Reflection
Total internal reflection (TIR) occurs when a light wave traveling in a medium with a higher refractive index () strikes an interface with a medium of lower refractive index () at an angle of incidence greater than the critical angle .
By Snell's Law, when the angle of refraction reaches :
Solving for :
Critical Angle at the Glass–Air Interface
For dense flint glass () and air ():
Because the incident angle is , which satisfies (), the light ray undergoes total internal reflection at the glass–air interface.
Critical Angle at the Glass–Water Interface
When water () replaces air at the interface:
Adding a denser second medium increases the ratio , which increases the critical angle from to .
Evaluating the Claim and Refraction into Water
The student's hypothesis is incorrect:
- Increasing the refractive index of the second medium narrows the angular range over which total internal reflection can take place (it requires angles greater than , rather than greater than ).
- Since the incident angle is now less than the new critical angle , total internal reflection is frustrated/eliminated.
Because light escapes into the water, we calculate the angle of refraction using Snell's Law:
Thus, light refracts into the water at an angle of with respect to the normal.
Typical errors
01 The student inverts the ratio of refractive indices when applying Snell's law for the critical angle, obtaining a sine value greater than 1 or taking the reciprocal.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You inverted the index ratio as , which yielded a sine value greater than , and then took the reciprocal to recover the angle. The correct definition is .
- Step 3
Because is closer to , total internal reflection still occurs at
CorrectBecause , total internal reflection no longer occurs; light refracts into the water.
Total internal reflection requires the angle of incidence to be greater than the critical angle (). Because adding water increases to , the incident ray at no longer meets this condition and refracts into the water.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the glass-air critical angle as .
You recognized that a sine value cannot exceed and adjusted your calculation to find the angle of .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of when setting up .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou misunderstood how raising the refractive index of the second medium affects total internal reflection. Increasing makes larger, which increases and narrows the range of angles where total internal reflection occurs ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Index Ratio Check
Light must travel from a denser medium to a rarer medium (), giving .
Always place the smaller refractive index in the numerator so that .
- TIR Inequality Check
Total internal reflection occurs only when .
Directly compare the actual angle of incidence with your computed rather than relying on qualitative intuition about refractive indices.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the glass-water critical angle: .
Compare the incident angle to the new critical angle: since , the condition is not satisfied.
Conclude that total internal reflection is frustrated/eliminated, and light transmits into the water via refraction at angle .
; ; total internal reflection does not occur at after water is added.
02 The student mistakenly concludes that an increased critical angle facilitates total internal reflection, incorrectly asserting that TIR still occurs at 40.00°.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Total internal reflection requires . An increased critical angle narrows the range of angles where total internal reflection happens, and since , light now transmits and refracts into the water.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the critical angle formula for both boundaries.
You accurately computed the numerical values of both critical angles.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated an increasing critical angle as broadening or preserving total internal reflection rather than making the threshold harder to reach.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the condition for total internal reflection () with a direct proportionality. Because total internal reflection requires the incident angle to be strictly greater than the critical angle, raising shrinks the angular window of total reflection . Thus, an incident angle of that previously exceeded now falls below , terminating total reflection.](streamdown:incomplete-link)
REASONING PATH
Your ACEpath teacher’s suggested approach- TIR Inequality Rule
Total internal reflection occurs only when light travels from a higher-index to a lower-index medium () and the angle of incidence satisfies .
Always compare the fixed incident angle directly against the critical angle using the inequality before drawing a conclusion.
- Effect of Decreasing Index Contrast
As , the ratio , which causes , severely narrowing the range of total internal reflection.
Remember that a higher critical angle makes total internal reflection harder to achieve, not easier.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompare the incident angle to the new critical angle: .
Conclude that because , total internal reflection is frustrated/eliminated.
Apply Snell's law to confirm transmission: .
, ; total internal reflection does not occur at after water is added because , and light refracts into the water at an angle of .
03 The student misinterprets the condition for total internal reflection as requiring the incident angle to be less than the critical angle rather than greater than it.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Total internal reflection requires . Since , total internal reflection is frustrated and no longer occurs.
You reversed the inequality condition for total internal reflection. Light only reflects totally when the angle of incidence exceeds the critical angle, not when it is below it.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the formula for both boundaries.
You performed accurate trigonometric calculations to find both critical angles.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set the criterion for total internal reflection as rather than .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the angular regime where refraction is possible (angles of incidence less than the critical angle) with the regime where total internal reflection occurs (angles of incidence strictly exceeding the critical angle).
REASONING PATH
Your ACEpath teacher’s suggested approach- TIR Inequality Condition
Total internal reflection occurs only when light travels from a denser medium to a rarer medium () and the incident angle satisfies .
Always verify that the incident angle is strictly greater than the critical angle before concluding that light undergoes total internal reflection.
- Effect of Increasing the Outer Refractive Index
Increasing the refractive index of the second medium increases the ratio , which increases and shrinks the angular range over which total internal reflection can occur.
Check whether the incident ray still exceeds the new, larger critical angle after adding the denser surrounding fluid.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompare the incident angle with the new critical angle .
Apply the TIR criterion: total internal reflection requires . Because , total internal reflection does not occur.
Calculate the refracted angle in water using Snell's law: , giving .
; ; since , total internal reflection does not occur, and light refracts into the water at .
Lock it in
What is the formula for the critical angle at an interface between two media of indices and ?
, valid only when light travels from higher index to lower index .
Similar question
A light ray in diamond () approaches an interface with air (). Calculate the critical angle . If the incident angle is , does total internal reflection occur?
Answer
. Since , total internal reflection does occur.
An optical fiber core has refractive index . It can be clad in either polymer () or silicone (). Which cladding allows total internal reflection over a wider range of core angles?
Answer
For polymer: . For silicone: . The polymer cladding yields a smaller critical angle, so total internal reflection occurs over a wider range ().
A ray travels in glass () toward a flat boundary. With air outside (), TIR occurs at . If an unknown oil layer replaces the air and the critical angle becomes , find the refractive index of the oil and determine whether the same ray at still undergoes TIR.
Answer
Using , we find . Because the new critical angle is , the ray at refracts into the oil, so TIR no longer occurs.