Resources
An elevator passenger of mass stands on a calibrated scale while the elevator decelerates as it approaches the top floor. The elevator moves upward at an initial speed of and comes to a complete stop over a vertical displacement of . Using a coordinate system where upward is designated as , state the sign and magnitude of the passenger's acceleration , identify the sign convention for all forces in the passenger's free-body diagram, and calculate the apparent weight (normal force ) registered by the scale. Use .
Answer and steps
Final answer
,
Steps
Calculate the vertical acceleration
Using the standard kinematic equation relating initial velocity, final velocity, constant acceleration, and displacement:
Given:
- Initial velocity: (upward)
- Final velocity: (comes to rest)
- Displacement: (upward)
Substitute these values into the kinematic equation:
The negative sign indicates that the acceleration vector points downward (in the direction), opposing the upward velocity as the elevator slows down.
Establish the forces and sign convention in the free-body diagram
With upward defined as the direction:
- Normal Force (): Exerted upward by the scale on the passenger, so it carries a positive sign: .
- Gravitational Force (): Exerted downward by gravity on the passenger, so it carries a negative sign: .
Apply Newton's second law to find the apparent weight
The apparent weight registered by the scale is the magnitude of the normal force . According to Newton's second law along the -axis:
Solving for :
Substitute the known values (, , and ):
Common Pitfall: Moving upward does not mean acceleration is positive. When an object moves in the positive direction but slows down, its acceleration points in the opposite direction (negative). Consequently, the normal force is less than the true weight (), making the passenger feel lighter.
Typical errors
01 The student assumes upward motion implies positive acceleration, incorrectly setting a_y = +4.00 m/s² and overestimating the normal force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
, so the sign is positive and magnitude is
CorrectWhen solving , subtracting from both sides gives , so . Because the elevator moves upward () while slowing down, the acceleration vector points downward ().
- Step 2
acts upward so it is positive () acts downward so it is negative ()
- Step 3Correct
Your formulation and rearrangement of Newton's second law were correct, but substituting the incorrect positive acceleration value caused the calculated normal force to be too large.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly selected the kinematic relation linking velocity, acceleration, and displacement.
You correctly defined the signs of upward normal force and downward gravity.
You correctly applied Newton's second law along the vertical axis as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeSolving gave instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisAssuming that upward motion must correspond to positive acceleration, rather than recognizing that deceleration in the positive direction means acceleration is negative.
REASONING PATH
Your ACEpath teacher’s suggested approach- Deceleration Sign Check
If velocity is positive () and the object slows down, acceleration must be negative ().
Always verify that velocity and acceleration have opposite signs whenever speed decreases.
- Apparent Weight Reality Check
When an elevator slows down while moving upward, the scale reading must be less than the true weight ().
Compare your calculated with true weight ; you should feel lighter, not heavier.
CORRECTED PATH
ACEpath Teacher's DemonstrationSolve for vertical acceleration: .
Substitute into Newton's second law: .
Calculate final normal force: .
,
02 The student omits the acceleration term by assuming the scale always reads the true weight mg.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
The sign is negative and magnitude is
- Step 2
Normal force is positive (upward) Gravitational force is negative (downward)
- Step 3Correct
Because the passenger has a downward acceleration of , the net force is not zero. Setting assumes the passenger is in static equilibrium or moving at constant velocity. Using gives , which yields .
WHAT YOU DID WELL
Compliments from Your TeacherYou used the kinematic relation correctly to find the passenger's vertical acceleration.
You correctly identified the signs and directions of both vertical forces acting on the passenger.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the vertical forces as balanced () rather than equating the net force to , effectively dropping the nonzero acceleration you just solved for.
REASONING PATH
Your ACEpath teacher’s suggested approach- Link Net Force to Acceleration
Newton's second law states . Only set normal force equal to gravity () when vertical acceleration is zero.
Always write out first, substitute each force with its sign (), and include the calculated value of before solving for .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Newton's second law along the vertical axis: .
Substitute the signed forces from your free-body diagram: .
Rearrange to isolate the normal force: .
Substitute , , and : .
,
03 The student subtracts the acceleration twice in Newton's second law by writing F_N + mg = m a_y instead of F_N - mg = m a_y.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
, so the sign is negative and magnitude is
- Step 2
is positive upward, is negative downward
- Step 3Correct
In Newton's second law along the -axis, the downward gravitational force must enter with a minus sign as . Writing added the gravitational force in the positive direction instead of opposing it.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the kinematic equation relating velocity, displacement, and acceleration to determine the elevator's deceleration.
You correctly noted that the normal force acts upward () and the gravitational force acts downward ().
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou correctly identified that gravity acts downward, but you wrote instead of in your equation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou did not transfer your stated sign convention () into the algebraic net force sum . This caused the magnitude of gravity to be subtracted from the acceleration term when isolating , resulting in a negative apparent weight.
REASONING PATH
Your ACEpath teacher’s suggested approach- Translate free-body diagram directly into net force
For vertical motion with defined upward: .
Always write down the sum of forces with explicit signs before rearranging: .
- Physical reality check on normal forces
A scale can only push upward on a standing passenger, meaning must always be positive or zero ().
If your calculated normal force comes out negative, check the signs of each force component in your equation.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Newton's second law along the vertical axis with correct force signs: .
Rearrange to isolate the normal force: .
Substitute the known values (, , and ): .
Round to three significant figures: .
Lock it in
If an object moves in the positive direction () but is slowing down, what is the sign of its acceleration?
Negative (). To reduce the magnitude of velocity, acceleration must point opposite to the direction of motion.
Similar question
A student stands on a scale in an elevator descending at . The elevator brakes to a stop over a distance of . With defined upward, find the passenger's acceleration and apparent weight . (Use )
Answer
, . Key steps: , , . From , we get . Then .
An elevator starts from rest and accelerates downward with a magnitude of . What is the reading on a spring scale supporting a package inside? (Use , upward)
Answer
. Key steps: Downward acceleration means . Using , we obtain .
A crane lifts an crate upward. Starting from , the crate slows down to rest with constant acceleration over a vertical rise of . Determine the tension in the lifting cable during this deceleration. (Use , upward)
Answer
. Key steps: . By Newton's second law, .