Resources
A student measures the 1D position of an air-track glider subjected to a constant force using a sonic motion detector set at the far end of the track. Because the detector is at the end toward which the glider travels, the student defines the detector position as the origin () and the direction toward the launcher as the positive -axis. The measured coordinate values are fitted to the quadratic kinematic model , yielding , , and . Using standard coordinate calculus where velocity is and acceleration is , determine: (a) whether the glider is speeding up or slowing down at , and (b) the signed position coordinate and elapsed time when the glider momentarily comes to rest.
Answer and steps
Final answer
(a) Slowing down (since and have opposite signs); (b) ,
Steps
Write the Kinematic Equations for Position, Velocity, and Acceleration
The given quadratic model for position as a function of time is:
Substituting the fitted parameters , , and :
Using standard calculus definitions:
- Velocity is the first derivative of position with respect to time:
- Acceleration is the derivative of velocity:
The acceleration is constant throughout the motion.
Determine if the Glider is Speeding Up or Slowing Down at
Evaluate velocity at :
The acceleration at is:
Rule:
- An object is speeding up if velocity and acceleration have the same sign ().
- An object is slowing down if velocity and acceleration have opposite signs ().
Since and , the velocity vector points in the negative -direction while the acceleration points in the positive -direction. Therefore, the glider is slowing down.
(Common Pitfall: Do not assume a negative velocity means "slowing down." A negative velocity only indicates direction of motion. Speeding up or slowing down is strictly determined by whether the signs of velocity and acceleration agree or oppose.)
Find the Time and Position When the Glider Momentarily Comes to Rest
Momentarily coming to rest means instantaneous velocity equals zero:
Substitute back into the position function :
Thus, the glider momentarily comes to rest at at position coordinate .
Typical errors
01 The student forgets the power rule coefficient 2 when differentiating t², equating acceleration directly to c2 instead of 2c2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
When differentiating , the derivative of is . Multiplying by yields , so rather than .
- Step 2Correct
Your numerical velocity was affected by the missing coefficient of 2 in , but your conceptual rule and conclusion that opposite signs indicate slowing down are entirely correct.
- Step 3Correct
You correctly set velocity to zero to find the turnaround time, but solving the correct velocity equation gives .
- Step 4Correct
In addition to using the incorrect time , evaluating actually yields , not . Using the correct turnaround time gives .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the glider comes to rest when its instantaneous velocity is zero.
You correctly stated and applied the rule that motion slows down when velocity and acceleration carry opposite signs.
You substituted your turnaround time back into the position function to find the position at rest.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou made an arithmetic sign slip when evaluating , recording instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou omitted the factor of 2 from the derivative power rule , equating the -coefficient in velocity to instead of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Power Rule on Polynomial Kinematic Models
For a quadratic position function , the derivative is .
Always bring the exponent down as a multiplier before recording the derivative term.
- Relating Fit Coefficients to Standard Kinematics
Comparing to reveals that , which means .
Double the coefficient to obtain the constant acceleration.
CORRECTED PATH
ACEpath Teacher's DemonstrationDifferentiate correctly: .
Differentiate again for acceleration: .
At : . Since and , the signs oppose, so the glider is slowing down.
Set : .
Evaluate position at : .
(a) Slowing down; (b) ,
02 The student equates speeding up with positive acceleration, ignoring the sign of velocity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Since and , the signs oppose (), so the glider is slowing down.
An object speeds up only when velocity and acceleration share the same sign. Because velocity is negative while acceleration is positive, acceleration acts opposite to the direction of motion, meaning the glider is slowing down.
- Step 3
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly took the first and second derivatives of the position function to find velocity and acceleration.
You accurately calculated the numerical values of and .
You correctly applied the condition to find the turnaround time and corresponding position coordinate.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou equated a positive acceleration () with speeding up, overlooking that speeding up requires velocity and acceleration to point in the same direction (). When velocity is negative, a positive acceleration reduces the magnitude of velocity, causing the object to slow down.
REASONING PATH
Your ACEpath teacher’s suggested approach- Speeding Up vs. Slowing Down Rule
Speed increases (speeds up) if and only if and have the same sign (). Speed decreases (slows down) if and have opposite signs ().
Always evaluate both the sign of and the sign of before concluding whether speed is increasing or decreasing.
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the sign of : .
Evaluate the sign of : .
Compare signs: Since and have opposite signs (), the acceleration opposes motion, so the glider is slowing down.
(a) Slowing down; (b) , $x = 0.400
03 The student confuses momentarily coming to rest with reaching the origin x(t) = 0 instead of setting velocity v(t) = 0.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Coming to rest means the instantaneous velocity is zero (), not that the object has returned to the coordinate origin ().
- Step 4Correct
Because this quadratic was set up from rather than , the resulting discriminant analysis incorrectly concluded that the glider never comes to rest.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly derived the linear velocity and constant acceleration expressions by differentiating the position model.
You correctly applied the sign-comparison rule between velocity and acceleration to conclude that the glider is slowing down at .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated being 'at rest' (a kinematic state where speed/velocity is zero, ) with being 'at the origin' (a spatial position where the coordinate is zero, ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Kinematic Condition for Rest
An object is momentarily at rest when its instantaneous rate of position change is zero: .
Always set the velocity function when a problem mentions 'comes to rest' or 'turns around'.
- Distinguishing Position from Motion State
The coordinate denotes where the detector/origin is placed, whereas describes the object's instantaneous motion.
Reserve strictly for questions asking when an object passes or hits the reference origin.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the velocity function to zero: .
Solve for the time: .
Substitute back into the position function : .
(a) Slowing down; (b) ,
Lock it in
If position is modeled as , what are the expressions for velocity and constant acceleration in terms of the coefficients?
and . Remember that the derivative of brings down a factor of 2.
Similar question
A particle moves along the -axis according to (in meters and seconds). Find the velocity function , the acceleration , and the time when the particle comes to rest.
Answer
Differentiating gives and . Setting yields .
A cart's position on an incline is measured as . (a) Is the cart speeding up or slowing down at ? (b) What is its position coordinate when it momentarily stops?
Answer
(a) and . At , while ; because the signs oppose, it is slowing down. (b) Setting gives . Then .
An experimental quadratic fit gives a runner's position as . Determine the distance traveled by the runner between and .
Answer
. The runner stops at . Positions are , , and . Distance from to is , and from to is . Total distance traveled is .