Resources

A block of mass m=0.400 kgm = 0.400\text{ kg} on a smooth, horizontal tabletop of height h=1.25 mh = 1.25\text{ m} is held against a light horizontal spring with force constant k=250 N/mk = 250\text{ N/m}, compressing the spring by Δx=0.120 m\Delta x = 0.120\text{ m}. When the block is released from rest, it accelerates across the frictionless surface, disengages from the spring at its equilibrium position right at the table edge, and projects horizontally into the air. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the launch speed v0v_0 of the block as it leaves the table, and (b) the horizontal distance RR from the base of the table to where the block strikes the floor.

Answer and steps

Final answer

(a) v0=3.00 m/sv_0 = 3.00\text{ m/s}; (b) R=1.52 mR = 1.52\text{ m}

Steps

Part (a): Finding the Launch Speed v0v_0

When the compressed spring is released, its elastic potential energy is converted entirely into the translational kinetic energy of the block because the horizontal surface is frictionless.

  1. Apply Conservation of Mechanical Energy: The initial elastic potential energy stored in the spring is: Eelastic=12k(Δx)2E_{\text{elastic}} = \frac{1}{2} k (\Delta x)^2 The kinetic energy of the block as it separates from the spring at its equilibrium position is: Ekinetic=12mv02E_{\text{kinetic}} = \frac{1}{2} m v_0^2
  2. Equate the Energies and Solve for v0v_0: 12mv02=12k(Δx)2\frac{1}{2} m v_0^2 = \frac{1}{2} k (\Delta x)^2 v0=Δxkmv_0 = \Delta x \sqrt{\frac{k}{m}}
  3. Substitute the Given Values: v0=0.1202500.400=0.120625=0.120⋅25=3.00 m/sv_0 = 0.120 \sqrt{\frac{250}{0.400}} = 0.120 \sqrt{625} = 0.120 \cdot 25 = 3.00\text{ m/s}

Part (b): Finding the Horizontal Range RR

After leaving the edge of the tabletop horizontally, the block undergoes horizontal projectile motion. The horizontal and vertical motions are independent.

  1. Calculate the Time of Flight tt: Since the block is launched horizontally, its initial vertical velocity is zero (v0y=0v_{0y} = 0). Using the kinematic equation for free fall in the vertical direction: h=12gt2h = \frac{1}{2} g t^2 Solving for time tt: t=2hg=2⋅1.259.80=2.509.80≈0.5051 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2 \cdot 1.25}{9.80}} = \sqrt{\frac{2.50}{9.80}} \approx 0.5051\text{ s}
  2. Calculate the Horizontal Distance RR: With negligible air resistance, the horizontal velocity remains constant throughout the flight (vx=v0v_x = v_0): R=v0tR = v_0 t R=3.00⋅0.5051≈1.52 mR = 3.00 \cdot 0.5051 \approx 1.52\text{ m}

Common Pitfall: Remember that the horizontal launch velocity does not affect the time the object takes to fall to the floor; the time of flight depends solely on the vertical height hh and the acceleration due to gravity gg.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the compression distance Δx when formulating the elastic potential energy formula, underestimating the launch speed and consequently the range.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (12\frac{1}{2}) k Δ\Delta x = 12\frac{1}{2} m v_0^2   ⟹  \implies 250 ⋅\cdot 0.120 = 0.400 ⋅\cdot v_0^2   ⟹  \implies 30.0 = 0.400 ⋅\cdot v_0^2   ⟹  \implies v_0^2 = 75.0   ⟹  \implies v_0 = 75.0\sqrt{75.0} ≈\approx 8.66 m/s\text{ m/s}

    Correct

    12\frac{1}{2} k (Δ\Delta x)^2 = 12\frac{1}{2} m v_0^2   ⟹  \implies v_0 = Δ\Delta x km\sqrt{\frac{k}{m}} = 0.120 2500.400\sqrt{\frac{250}{0.400}} = 3.00 m/s\text{ m/s}

    You omitted the square on the compression distance Δx\Delta x. The elastic potential energy stored in an ideal spring is Ep=12k(Δx)2E_p = \frac{1}{2} k (\Delta x)^2, not 12kΔx\frac{1}{2} k \Delta x.

  2. Step 2

    t = 2hg\sqrt{\frac{2h}{g}} = 2⋅1.259.80\sqrt{\frac{2 \cdot 1.25}{9.80}} ≈\approx 0.505 s\text{ s}

  3. Step 3

    R = v_0 ⋅\cdot t = 8.66 ⋅\cdot 0.505 ≈\approx 4.37 m\text{ m}

    Correct

    R = v_0 t = 3.00 ⋅\cdot 0.5051 ≈\approx 1.52 m\text{ m}

    Your projectile range formula R=v0tR = v_0 t is completely sound, but your result was affected by the launch speed v0v_0 calculated in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the initial stored elastic energy converts to horizontal kinetic energy.

You correctly solved for the vertical time of flight using h=12gt2h = \frac{1}{2}gt^2.

You correctly applied the horizontal range relation R=v0tR = v_0 t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Exponent in Elastic Potential Energy

You wrote kΔxk \Delta x instead of k(Δx)2k (\Delta x)^2 when setting up the initial elastic potential energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing Hooke's law for spring restoring force (F=kΔxF = k \Delta x) with the formula for spring elastic potential energy (U=12k(Δx)2U = \frac{1}{2} k (\Delta x)^2), resulting in a missing square and mismatched energy units.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis of Energy
  • Energy has units of Joules (N⋅m\text{N}\cdot\text{m}). Since kk has units of N/m\text{N/m}, multiplying by (Δx)2(\Delta x)^2 yields (N/m)⋅m2=N⋅m(\text{N/m})\cdot\text{m}^2 = \text{N}\cdot\text{m}.

  • Whenever you write an elastic energy term, check that the displacement Δx\Delta x is squared so the units match kinetic energy.

Force vs. Energy Distinction
  • Spring force is linear in displacement (F=kΔxF = k \Delta x), whereas spring potential energy is quadratic (U=12k(Δx)2U = \frac{1}{2} k (\Delta x)^2) because work is the integral of force over distance.

  • Ensure you use the quadratic expression whenever equating spring states to work or kinetic energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the squared displacement into the conservation of energy equation: 12(250)(0.120)2=12(0.400)v02\frac{1}{2} (250)(0.120)^2 = \frac{1}{2} (0.400) v_0^2.

  2. Solve for the launch speed: v0=0.1202500.400=0.120×25=3.00 m/sv_0 = 0.120 \sqrt{\frac{250}{0.400}} = 0.120 \times 25 = 3.00\text{ m/s}.

  3. Multiply the corrected speed by the flight time: R=(3.00 m/s)(0.5051 s)≈1.52 mR = (3.00\text{ m/s})(0.5051\text{ s}) \approx 1.52\text{ m}.

Final answer

(a) v0=3.00 m/sv_0 = 3.00\text{ m/s}; (b) R=1.52 mR = 1.52\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that all energy formulas involving displacement (Us=12kx2U_s = \frac{1}{2}kx^2) have squared length variables before performing arithmetic.

  • Perform a quick unit check whenever equating mechanical energies.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to take the square root when solving for the flight time from the vertical kinematic equation, resulting in an overly large time and inflated range.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    12k(Δx)2=12mv02  ⟹  v0=Δxkm  ⟹  v0=0.120⋅2500.400=0.120⋅25.0=3.00 m/s\frac{1}{2} k (\Delta x)^2 = \frac{1}{2} m v_0^2 \implies v_0 = \Delta x \sqrt{\frac{k}{m}} \implies v_0 = 0.120 \cdot \sqrt{\frac{250}{0.400}} = 0.120 \cdot 25.0 = 3.00\text{ m/s}

  2. Step 2

    h=12gt2  ⟹  t=2hg=2⋅1.259.80≈0.255 sh = \frac{1}{2} g t^2 \implies t = \frac{2h}{g} = \frac{2 \cdot 1.25}{9.80} \approx 0.255\text{ s}

    Correct

    h=12gt2  ⟹  t=2hg=2⋅1.259.80≈0.505 sh = \frac{1}{2} g t^2 \implies t = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2 \cdot 1.25}{9.80}} \approx 0.505\text{ s}

    You omitted the square root when solving for time tt from h=12gt2h = \frac{1}{2}gt^2. The expression 2hg\frac{2h}{g} equals t2t^2, not tt.

  3. Step 3

    R=v0⋅t=3.00⋅0.255=0.765 mR = v_0 \cdot t = 3.00 \cdot 0.255 = 0.765\text{ m}

    Correct

    R=v0t=3.00⋅0.5051≈1.52 mR = v_0 t = 3.00 \cdot 0.5051 \approx 1.52\text{ m}

    You correctly applied the horizontal range relation R=v0tR = v_0 t, but your numerical result was affected by the incorrect flight time from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the conservation of mechanical energy to determine the launch speed of the block.

You correctly identified that the vertical motion is governed by free fall with zero initial vertical velocity.

You correctly related the horizontal range to the launch velocity and time of flight.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Square Root in Kinematic Rearrangement

You isolated tt from h=12gt2h = \frac{1}{2}gt^2 as 2hg\frac{2h}{g} instead of taking the square root to get 2hg\sqrt{\frac{2h}{g}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating a squared variable with the linear variable during algebraic rearrangement (t2t^2 vs. tt).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Variable Powers
  • When isolating a squared term like t2=2hgt^2 = \frac{2h}{g}, take the square root of both sides so that t=2hgt = \sqrt{\frac{2h}{g}}.

  • Check each side of your equation before substituting numerical values to confirm the variable has an exponent of 11.

Dimensional Check
  • The units of 2hg\frac{2h}{g} are mm/s2=s2\frac{\text{m}}{\text{m/s}^2} = \text{s}^2, which represents time squared, not time.

  • Confirm that the right-hand side has units of seconds (s\text{s}) by ensuring the square root is applied: s2=s\sqrt{\text{s}^2} = \text{s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the free-fall equation: h=12gt2h = \frac{1}{2} g t^2

  2. Isolate t2t^2: t2=2hgt^2 = \frac{2h}{g}

  3. Take the square root of both sides: t=2hg=2⋅1.259.80=0.2551≈0.5051 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2 \cdot 1.25}{9.80}} = \sqrt{0.2551} \approx 0.5051\text{ s}

  4. Compute the horizontal range: R=v0t=3.00 m/s⋅0.5051 s≈1.52 mR = v_0 t = 3.00\text{ m/s} \cdot 0.5051\text{ s} \approx 1.52\text{ m}

Final answer

(a) v0=3.00 m/sv_0 = 3.00\text{ m/s}; (b) R=1.52 mR = 1.52\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the intermediate step t2=2hgt^2 = \frac{2h}{g} explicitly before writing t=2hgt = \sqrt{\frac{2h}{g}}.

  • Perform a quick dimensional check whenever you solve for a kinematic variable to make sure you have not omitted a root or power.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the spring formula with Hooke's law for force rather than potential energy, equating the spring force to kinetic energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    k∗Δx=(12)∗m∗v02  ⟹  250∗0.120=0.5∗0.400∗v02  ⟹  30.0=0.200∗v02  ⟹  v02=150  ⟹  v0=150≈12.2 m/sk * \Delta x = \left(\frac{1}{2}\right) * m * v_0^2 \implies 250 * 0.120 = 0.5 * 0.400 * v_0^2 \implies 30.0 = 0.200 * v_0^2 \implies v_0^2 = 150 \implies v_0 = \sqrt{150} \approx 12.2\text{ m/s}

    Correct

    12k(Δx)2=12mv02  ⟹  v0=Δxkm=0.1202500.400=3.00 m/s\frac{1}{2} k (\Delta x)^2 = \frac{1}{2} m v_0^2 \implies v_0 = \Delta x \sqrt{\frac{k}{m}} = 0.120 \sqrt{\frac{250}{0.400}} = 3.00\text{ m/s}

    You equated spring force F=kΔxF = k\Delta x (in newtons) to kinetic energy 12mv02\frac{1}{2}mv_0^2 (in joules). Elastic potential energy is Us=12k(Δx)2U_s = \frac{1}{2}k(\Delta x)^2.

  2. Step 2

    t=2hg=2∗1.259.80≈0.505 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2 * 1.25}{9.80}} \approx 0.505\text{ s}

  3. Step 3

    R=v0∗t=12.2∗0.505≈6.16 mR = v_0 * t = 12.2 * 0.505 \approx 6.16\text{ m}

    Correct

    R=v0t=(3.00 m/s)(0.5051 s)≈1.52 mR = v_0 t = (3.00\text{ m/s})(0.5051\text{ s}) \approx 1.52\text{ m}

    Your kinematic formula R=v0tR = v_0 t is completely correct, but the final numerical value is affected by the launch speed error in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that vertical free fall determines the time of flight.

You accurately calculated the time of flight as t≈0.505 st \approx 0.505\text{ s}.

You correctly applied the horizontal range relation R=v0tR = v_0 t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion: spring force vs. elastic potential energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the linear restoring force formula F=kΔxF = k\Delta x in place of the elastic potential energy formula Us=12k(Δx)2U_s = \frac{1}{2}k(\Delta x)^2 when setting up mechanical energy conservation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Unit Check
  • Force is measured in newtons (N\text{N}), whereas energy is measured in joules (J=N⋅m\text{J} = \text{N}\cdot\text{m}).

  • Always check that both sides of an energy conservation equation have units of energy before solving.

Elastic Potential Energy Formula
  • Us=12k(Δx)2U_s = \frac{1}{2}k(\Delta x)^2, representing the work done to compress or stretch a spring.

  • When equating spring storage to kinetic energy, use 12k(Δx)2=12mv2\frac{1}{2}k(\Delta x)^2 = \frac{1}{2}mv^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set initial spring elastic potential energy equal to final kinetic energy: 12k(Δx)2=12mv02\frac{1}{2} k (\Delta x)^2 = \frac{1}{2} m v_0^2.

  2. Solve for launch speed: v0=Δxkm=0.1202500.400=0.120(25)=3.00 m/sv_0 = \Delta x \sqrt{\frac{k}{m}} = 0.120\sqrt{\frac{250}{0.400}} = 0.120(25) = 3.00\text{ m/s}.

  3. Calculate the horizontal distance: R=v0t=(3.00 m/s)(0.5051 s)≈1.52 mR = v_0 t = (3.00\text{ m/s})(0.5051\text{ s}) \approx 1.52\text{ m}.

Final answer

(a) v0=3.00 m/sv_0 = 3.00\text{ m/s}; (b) R=1.52 mR = 1.52\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinct formulas for Hooke's law (F=kxF = kx) versus elastic potential energy (U=12kx2U = \frac{1}{2}kx^2).

  • Perform unit/dimension sanity checks whenever equating two physical quantities.

  • Rework the horizontal range calculation using the corrected launch speed v0=3.00 m/sv_0 = 3.00\text{ m/s}.

Lock it in

Similar question

01

A 0.200 kg0.200\text{ kg} toy dart is loaded into a spring gun by compressing a spring with k=80.0 N/mk = 80.0\text{ N/m} by Δx=0.050 m\Delta x = 0.050\text{ m}. If the gun is fired horizontally from floor level along a frictionless surface, find the speed of the dart as it leaves the spring.

Answer

v0=1.00 m/sv_0 = 1.00\text{ m/s}. By energy conservation, 12mv02=12k(Δx)2  ⟹  v0=Δxkm=0.05080.00.200=0.050×20=1.00 m/s\frac{1}{2}m v_0^2 = \frac{1}{2}k(\Delta x)^2 \implies v_0 = \Delta x \sqrt{\frac{k}{m}} = 0.050 \sqrt{\frac{80.0}{0.200}} = 0.050 \times 20 = 1.00\text{ m/s}.

02

A 0.500 kg0.500\text{ kg} puck rests on a frictionless horizontal tabletop of height 0.800 m0.800\text{ m}. It is launched by a spring with k=450 N/mk = 450\text{ N/m} compressed by 0.080 m0.080\text{ m}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the horizontal distance RR from the table edge to where the puck hits the floor.

Answer

R≈0.969 mR \approx 0.969\text{ m}. First, find launch speed: 12mv02=12k(Δx)2  ⟹  v0=0.0804500.500=0.080×30=2.40 m/s\frac{1}{2}mv_0^2 = \frac{1}{2}k(\Delta x)^2 \implies v_0 = 0.080\sqrt{\frac{450}{0.500}} = 0.080 \times 30 = 2.40\text{ m/s}. Next, find time of flight: t=2hg=2(0.800)9.80≈0.404 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2(0.800)}{9.80}} \approx 0.404\text{ s}. Finally, R=v0t=2.40×0.404≈0.969 mR = v_0 t = 2.40 \times 0.404 \approx 0.969\text{ m}.

03

A horizontal spring with force constant kk is compressed by distance dd and launches a block of mass mm horizontally off a table of height hh. By what factor does the horizontal landing range RR increase if the initial compression distance is doubled to 2d2d?

Answer

The range increases by a factor of 22. Since v0=dkmv_0 = d\sqrt{\frac{k}{m}}, launch velocity is directly proportional to compression dd. The vertical fall time t=2hgt = \sqrt{\frac{2h}{g}} is unchanged because it depends solely on hh. Therefore, R=v0t∝dR = v_0 t \propto d, meaning doubling dd exactly doubles RR.

Loading workspace…