Resources
A crate of mass is placed on a frictionless incline tilted at an angle above the horizontal. A light string attached to passes over a frictionless pulley at the summit of the incline and connects to a hanging counterweight of mass . When released from rest, the hanging counterweight accelerates downward at . Taking , determine the incline angle in degrees.
Answer and steps
Final answer
Steps
Identify the System and Forces
The system consists of two connected masses:
- The crate of mass on a frictionless incline of angle .
- The counterweight of mass hanging vertically.
Because the connecting string is light and inextensible and the pulley is frictionless:
- Both blocks experience the same magnitude of acceleration, .
- The tension is uniform throughout the string.
Set Up the Equations of Motion
Choose the direction of motion as positive for each object (downward for , and up along the incline for ):
-
For the hanging counterweight (): The downward gravitational force is opposed by the upward tension :
Solving for the tension :
- For the crate on the incline (): Along the incline, the tension pulls upward, while the parallel component of gravity acts downward:
Combine Equations to Solve for
Substitute the expression for into the equation for :
Rearrange to isolate :
Dividing by :
Substitute Numerical Values
Substitute the given quantities (, , , and ):
Taking the inverse sine:
Common Pitfall: Forgetting the component of gravity down the incline. Gravity acts strictly downward, so only its projection along the incline, , opposes the tension. The perpendicular component, , is balanced entirely by the normal force from the incline surface.
Typical errors
01 The student confuses the trigonometric components along and perpendicular to the incline, incorrectly using cos θ instead of sin θ for the parallel component of gravity, which leads to θ ≈ 64.8°.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used instead of for the component of gravity along the incline. Since is measured from the horizontal, the angle between the vertical gravity vector and the normal to the incline is , which makes the component parallel to the slope and the perpendicular component .
- Step 3Correct
Your algebraic isolation and arithmetic were carried out correctly, but the equation inherited the cosine term from the error in Step 2.
- Step 4Correct
Your calculation of gave , which is the complement of the correct angle because of the sine-cosine swap in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the forces acting on the hanging mass and set up Newton's second law with the downward direction taken as positive.
You accurately solved for the tension in the string as .
You correctly carried through the algebraic rearrangement and inverse trigonometric evaluation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeWriting instead of for the downhill gravitational force component.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the parallel and perpendicular components of gravity on an inclined plane. When an incline is tilted at an angle above the horizontal, the normal to the surface makes an angle with the vertical. Consequently, the component perpendicular into the slope is , while the component directed down along the slope is .
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Limit as $\theta \to 0^\circ$
On a horizontal surface (), gravity pulls purely downward with zero component along the surface: , so .
Always test : if your parallel force expression gives , that means gravity would pull a block along a flat floor, which is physically impossible.
- Decompose Gravity with Right Triangles
In the force triangle formed by the vertical gravity vector and its components, the component parallel to the surface is the opposite side to angle .
Draw the force triangle with hypotenuse vertical; the leg opposite is parallel to the incline (), and the adjacent leg is perpendicular to the incline ().
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Newton's second law along the incline using the parallel component : .
Substitute the known values , , , and : .
Rearrange to solve for : .
02 The student assumes the hanging mass accelerates under free fall and ignores the system acceleration when calculating tension, setting T = m₂g, which leads to θ ≈ 30.7°.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the hanging mass is accelerating downward at , the downward gravitational force must exceed the upward tension. Setting treats the mass as if it were in static equilibrium.
- Step 2
- Step 3Correct
Your algebraic rearrangement and substitution were executed properly, but the result carries forward the incorrect tension value from Step 1.
- Step 4Correct
Evaluating the inverse sine yields an incorrect angle due to the upstream error in tension.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the component of gravity acting parallel to the incline as .
You correctly formulated Newton's second law for the block on the incline as .
You performed the algebraic steps to isolate and solve for the unknown angle cleanly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated tension to the weight of the hanging counterweight () instead of applying Newton's second law to the accelerating mass.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating a moving or accelerating body under static equilibrium conditions () when calculating contact or internal forces.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check for System Acceleration
For a vertical mass accelerating downward, , so .
Always draw a separate free-body diagram for each accelerating body and write before assuming .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Newton's second law to : .
Substitute into the incline equation: .
Rearrange to solve for : .
Take the inverse sine: .
03 The student reverses the sign of acceleration for m₁ along the incline, writing m₁g sin θ - T = m₁a as if m₁ were accelerating down the incline, resulting in an invalid negative sine value or flawed conclusion.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the string is inextensible and the counterweight moves downward, the crate must accelerate up the incline. The net force in the direction of motion is tension minus the downslope gravitational component, so the equation of motion is .
- Step 3Correct
This step correctly isolates the sine ratio from your previous equation, but the numerical numerator is affected by the earlier sign error.
- Step 4Correct
Your inverse sine calculation is algebraically consistent with your value of , but the final angle is incorrect due to the propagated sign error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the tension is uniform throughout the light string.
You set up the hanging mass equation with the correct signs.
You solved for the numerical string tension accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated both connected masses as accelerating in opposing senses along the string (both away from the pulley / downward), violating the kinematic constraint that a taut string requires the crate to accelerate up the incline when the hanging mass accelerates downward.
REASONING PATH
Your ACEpath teacher’s suggested approach- Kinematic Constraint Check
For a single taut string passing over a fixed pulley, if one mass moves away from the pulley, the other mass must move toward the pulley with the same acceleration magnitude.
Draw a directional arrow for the path of motion along the string before writing Newton's second law for each body.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the equation along the incline with upward along the plane as the positive acceleration direction: .
Substitute the known values: .
Rearrange to solve for : , so .
Take the inverse sine: .
Lock it in
For an object of mass on an incline tilted at angle above the horizontal, which trigonometric component of gravity acts parallel to the incline surface?
.
Because the incline angle is with the horizontal, the component pulling the mass down the slope is opposite to in the force triangle, giving .
Similar question
A box is held at rest on a frictionless incline tilted at an angle above the horizontal by a light rope running parallel to the incline. Taking , find the tension in the rope.
Answer
. Since the box is at rest, the upward tension balances the parallel component of gravity: .
A block of mass slides down a frictionless incline tilted at an unknown angle with an acceleration of . Taking , determine the incline angle in degrees.
Answer
. The only force acting along the incline is the parallel component of gravity: . Thus .
A cart on a frictionless incline of angle is connected via a light cord over a frictionless pulley to a hanging sphere. When released, the cart accelerates up the incline at . Taking , find the incline angle .
Answer
.
- For the hanging sphere (): .
- For the cart () moving up the incline: .
- .
- .