Resources

In an introductory physics laboratory, students set up a simple pendulum using a photogate timer at the bottom of the swing to measure the period across five distinct string lengths. For a specific trial with nominal string length lstring=78.4 cml_{\text{string}} = 78.4\text{ cm} and a spherical brass bob of measured diameter d=3.20 cmd = 3.20\text{ cm}, the photogate logs the time for 2020 consecutive complete oscillations as t20=35.88 st_{20} = 35.88\text{ s}. Accounting for the finite radius of the bob to find the center-of-mass length LL: (a) determine the experimental effective length LL in meters, (b) calculate the experimental period TexpT_{\text{exp}} and its associated angular frequency ωexp\omega_{\text{exp}}, and (c) calculate the experimentally determined local acceleration due to gravity gexpg_{\text{exp}}.

Answer and steps

Final answer

(a) L=0.800 mL = 0.800\text{ m}; (b) Texp=1.794 sT_{\text{exp}} = 1.794\text{ s}, ωexp=3.502 rad/s\omega_{\text{exp}} = 3.502\text{ rad/s}; (c) gexp=9.81 m/s2g_{\text{exp}} = 9.81\text{ m/s}^2

Steps

Part (a): Determine the Effective Pendulum Length LL

For a simple pendulum with a spherical bob of finite size, the effective length LL extends from the fixed pivot point to the center of mass of the bob. For a uniform sphere, the center of mass lies at its geometric center, which is at a distance equal to the radius rr below the attachment point of the string.

  1. Find the radius rr from the measured diameter dd: r=d2=3.20 cm2=1.60 cmr = \frac{d}{2} = \frac{3.20\text{ cm}}{2} = 1.60\text{ cm}
  2. Add the string length to the radius to get the total length to the center of mass: L=lstring+r=78.4 cm+1.60 cm=80.0 cmL = l_{\text{string}} + r = 78.4\text{ cm} + 1.60\text{ cm} = 80.0\text{ cm}
  3. Convert to meters: L=0.800 mL = 0.800\text{ m}

(Common Pitfall: Measuring length only to the top of the bob neglects the bob's radius, underestimating LL and resulting in a systematically low value for gg.)


Part (b): Calculate the Period TexpT_{\text{exp}} and Angular Frequency ωexp\omega_{\text{exp}}

  1. Experimental Period (TexpT_{\text{exp}}):
    The period is the time required for one full oscillation. Dividing the total measured time t20t_{20} by the number of oscillations N=20N = 20: Texp=t20N=35.88 s20=1.794 sT_{\text{exp}} = \frac{t_{20}}{N} = \frac{35.88\text{ s}}{20} = 1.794\text{ s}
  2. Angular Frequency (ωexp\omega_{\text{exp}}):
    The relationship between period and angular frequency is ω=2πT\omega = \frac{2\pi}{T}: ωexp=2π1.794 s≈3.502 rad/s\omega_{\text{exp}} = \frac{2\pi}{1.794\text{ s}} \approx 3.502\text{ rad/s}

Part (c): Calculate the Local Acceleration Due to Gravity gexpg_{\text{exp}}

For small-angle oscillations, the period of a simple pendulum is given by: T=2πLgT = 2\pi \sqrt{\frac{L}{g}}

Squaring both sides and solving for gg: gexp=4π2LTexp2=ωexp2Lg_{\text{exp}} = \frac{4\pi^2 L}{T_{\text{exp}}^2} = \omega_{\text{exp}}^2 L

Substitute the experimental values: gexp=4π2(0.800 m)(1.794 s)2≈9.81 m/s2g_{\text{exp}} = \frac{4\pi^2 (0.800\text{ m})}{(1.794\text{ s})^2} \approx 9.81\text{ m/s}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds the full diameter of the bob instead of its radius when finding the effective pendulum length, resulting in an overestimated length and acceleration due to gravity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    L=78.4 cm+3.20 cm=81.6 cm=0.816 mL = 78.4\text{ cm} + 3.20\text{ cm} = 81.6\text{ cm} = 0.816\text{ m}

    Correct

    L=lstring+d2=78.4 cm+1.60 cm=80.0 cm=0.800 mL = l_{\text{string}} + \frac{d}{2} = 78.4\text{ cm} + 1.60\text{ cm} = 80.0\text{ cm} = 0.800\text{ m}

    You added the full diameter d=3.20 cmd = 3.20\text{ cm} rather than the radius r=d2=1.60 cmr = \frac{d}{2} = 1.60\text{ cm}. The effective length of a simple pendulum extends from the pivot point to the center of mass of the bob.

  2. Step 2

    Texp=35.88 s/20=1.794 s  ⟹  ωexp=2π/1.794 s=3.502 rad/sT_{\text{exp}} = 35.88\text{ s} / 20 = 1.794\text{ s} \implies \omega_{\text{exp}} = 2\pi / 1.794\text{ s} = 3.502\text{ rad/s}

  3. Step 3

    gexp=4π2(0.816 m)(1.794 s)2=10.01 m/s2g_{\text{exp}} = \frac{4\pi^2(0.816\text{ m})}{(1.794\text{ s})^2} = 10.01\text{ m/s}^2

    Correct

    gexp=4π2(0.800 m)(1.794 s)2≈9.81 m/s2g_{\text{exp}} = \frac{4\pi^2(0.800\text{ m})}{(1.794\text{ s})^2} \approx 9.81\text{ m/s}^2

    Your formula and substitution method for gexpg_{\text{exp}} are completely correct, but the numerical answer is slightly too high because it inherited the incorrect length L=0.816 mL = 0.816\text{ m} from part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the single-period time from the 20-oscillation measurement.

You correctly related period and angular frequency using ω=2πT\omega = \frac{2\pi}{T}.

You set up the correct relationship between LL, TT, and gg for a simple pendulum.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Diameter vs. Radius in Pendulum Length

Adding the full diameter dd to the string length instead of the radius r=d/2r = d/2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the measured diameter of the bob with the distance from its attachment point to its center of mass. For a uniform sphere, the center of mass lies at its geometric center, which is one radius below the string attachment.

REASONING PATH
Your ACEpath teacher’s suggested approach
Pendulum Effective Length Definition
  • L=lstring+rbob=lstring+d2L = l_{\text{string}} + r_{\text{bob}} = l_{\text{string}} + \frac{d}{2}

  • When given the diameter of a pendulum bob, immediately divide by 22 to find the radius before calculating LL.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. r=d2=3.20 cm2=1.60 cmr = \frac{d}{2} = \frac{3.20\text{ cm}}{2} = 1.60\text{ cm}

  2. L=78.4 cm+1.60 cm=80.0 cm=0.800 mL = 78.4\text{ cm} + 1.60\text{ cm} = 80.0\text{ cm} = 0.800\text{ m}

  3. gexp=4π2LTexp2=4π2(0.800 m)(1.794 s)2≈9.81 m/s2g_{\text{exp}} = \frac{4\pi^2 L}{T_{\text{exp}}^2} = \frac{4\pi^2(0.800\text{ m})}{(1.794\text{ s})^2} \approx 9.81\text{ m/s}^2

Final answer

(a) L=0.800 mL = 0.800\text{ m}; (b) Texp=1.794 sT_{\text{exp}} = 1.794\text{ s}, ωexp=3.502 rad/s\omega_{\text{exp}} = 3.502\text{ rad/s}; (c) gexp=9.81 m/s2g_{\text{exp}} = 9.81\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check whether laboratory calipers or specs provide radius or diameter before substituting into formulas.

  • Remember that for rigid bodies modeled as point masses, lengths in rotational/pendulum formulas always measure to the center of mass.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the bob's radius entirely and uses the string length alone as the pendulum length, resulting in an underestimated value for g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    L=lstring=78.4 cm=0.784 mL = l_{\text{string}} = 78.4\text{ cm} = 0.784\text{ m}

    Correct

    L=lstring+d2=78.4 cm+1.60 cm=80.0 cm=0.800 mL = l_{\text{string}} + \frac{d}{2} = 78.4\text{ cm} + 1.60\text{ cm} = 80.0\text{ cm} = 0.800\text{ m}

    You set the pendulum length equal to the string length alone. The effective length of a simple pendulum extends from the pivot to the center of mass of the bob, so you need to add the radius r=d2=1.60 cmr = \frac{d}{2} = 1.60\text{ cm} to the string length.

  2. Step 2

    Texp=35.88 s20=1.794 sT_{\text{exp}} = \frac{35.88\text{ s}}{20} = 1.794\text{ s}

  3. Step 3

    ωexp=2π1.794 s=3.502 rad/s\omega_{\text{exp}} = \frac{2\pi}{1.794\text{ s}} = 3.502\text{ rad/s}

  4. Step 4

    gexp=4π2(0.784 m)(1.794 s)2=9.61 m/s2g_{\text{exp}} = \frac{4\pi^2(0.784\text{ m})}{(1.794\text{ s})^2} = 9.61\text{ m/s}^2

    Correct

    gexp=4π2(0.800 m)(1.794 s)2≈9.81 m/s2g_{\text{exp}} = \frac{4\pi^2(0.800\text{ m})}{(1.794\text{ s})^2} \approx 9.81\text{ m/s}^2

    Your formula and calculation are mathematically sound, but this final value is lower than expected because it inherited the underestimated length L=0.784 mL = 0.784\text{ m} from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly divided the total time by 20 to obtain the oscillation period.

You accurately converted the period into angular frequency using ω=2πT\omega = \frac{2\pi}{T}.

You used the correct relationship g=4π2LT2g = \frac{4\pi^2 L}{T^2} to solve for gravitational acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Effective length definition neglected bob radius

No slip occurred; you deliberately set L=lstringL = l_{\text{string}}, indicating a conceptual gap regarding the center-of-mass definition of pendulum length.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the pendulum length as merely the length of the suspension string, overlooking that the simple pendulum model treats mass as a point at the center of mass. For a finite spherical bob, the effective length must include the radius of the sphere.

REASONING PATH
Your ACEpath teacher’s suggested approach
Effective Pendulum Length
  • For a simple pendulum with a finite spherical bob, L=lstring+rbob=lstring+d2L = l_{\text{string}} + r_{\text{bob}} = l_{\text{string}} + \frac{d}{2}.

  • Always measure or compute the distance from the pivot point all the way to the center of mass of the attached bob.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the radius of the spherical bob: r=d2=3.20 cm2=1.60 cmr = \frac{d}{2} = \frac{3.20\text{ cm}}{2} = 1.60\text{ cm}.

  2. Compute the effective length to the center of mass: L=lstring+r=78.4 cm+1.60 cm=80.0 cm=0.800 mL = l_{\text{string}} + r = 78.4\text{ cm} + 1.60\text{ cm} = 80.0\text{ cm} = 0.800\text{ m}.

  3. Substitute L=0.800 mL = 0.800\text{ m} and Texp=1.794 sT_{\text{exp}} = 1.794\text{ s} into gexp=4π2LTexp2g_{\text{exp}} = \frac{4\pi^2 L}{T_{\text{exp}}^2}.

  4. Evaluate: gexp=4π2(0.800 m)(1.794 s)2≈9.81 m/s2g_{\text{exp}} = \frac{4\pi^2(0.800\text{ m})}{(1.794\text{ s})^2} \approx 9.81\text{ m/s}^2.

Final answer

(a) L=0.800 mL = 0.800\text{ m}; (b) Texp=1.794 sT_{\text{exp}} = 1.794\text{ s}, ωexp=3.502 rad/s\omega_{\text{exp}} = 3.502\text{ rad/s}; (c) gexp=9.81 m/s2g_{\text{exp}} = 9.81\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of effective pendulum length and verify that LL always reaches the bob's center of mass.

  • Practice calculating gg when bob dimensions (radius or diameter) are explicitly given.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the period when calculating g from the period formula, resulting in an incorrect formula and value for g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    L=78.4 cm+1.60 cm=80.0 cm=0.800 mL = 78.4\text{ cm} + 1.60\text{ cm} = 80.0\text{ cm} = 0.800\text{ m}

  2. Step 2

    Texp=35.88 s20=1.794 sT_{\text{exp}} = \frac{35.88\text{ s}}{20} = 1.794\text{ s}

  3. Step 3

    ωexp=2π1.794 s=3.502 rad/s\omega_{\text{exp}} = \frac{2\pi}{1.794\text{ s}} = 3.502\text{ rad/s}

  4. Step 4

    gexp=4π2(0.800 m)1.794 s=17.60 m/s2g_{\text{exp}} = \frac{4\pi^2(0.800\text{ m})}{1.794\text{ s}} = 17.60\text{ m/s}^2

    Correct

    gexp=4π2LTexp2=4π2(0.800 m)(1.794 s)2≈9.81 m/s2g_{\text{exp}} = \frac{4\pi^2 L}{T_{\text{exp}}^2} = \frac{4\pi^2(0.800\text{ m})}{(1.794\text{ s})^2} \approx 9.81\text{ m/s}^2

    Squaring both sides of T=2πLgT = 2\pi \sqrt{\frac{L}{g}} gives T2=4π2LgT^2 = \frac{4\pi^2 L}{g}, so g=4π2LT2g = \frac{4\pi^2 L}{T^2}. You squared 2π2\pi in the numerator to get 4π24\pi^2, but did not square the period TexpT_{\text{exp}} in the denominator.

WHAT YOU DID WELL
Compliments from Your Teacher

You accounted for the bob's radius to locate the pendulum's true center of mass.

You correctly divided the total time by 20 cycles to obtain the period of a single oscillation.

You applied the correct relation ω=2πT\omega = \frac{2\pi}{T} to find the angular frequency.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement / missing exponent

You squared the factor of 2π2\pi to get 4π24\pi^2, but left TT linear in the denominator instead of squaring it to T2T^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete algebraic squaring when inverting a radical formula: when isolating a variable under a square root (T=2πL/gT = 2\pi\sqrt{L/g}), every factor on both sides must be squared simultaneously before cross-multiplying.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency Check
  • Acceleration must have units of m/s2\text{m/s}^2.

  • Check the units of your expression: ms\frac{\text{m}}{\text{s}} gives velocity, whereas ms2\frac{\text{m}}{\text{s}^2} requires dividing by seconds squared (T2T^2).

Order of Operations for Isolating Radicals
  • To solve T=2πLgT = 2\pi\sqrt{\frac{L}{g}}, square the entire equation first: T2=(2π)2(Lg)2=4π2LgT^2 = (2\pi)^2\left(\sqrt{\frac{L}{g}}\right)^2 = \frac{4\pi^2 L}{g}.

  • Isolate gg only after all exponents are fully distributed to both sides of the equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the rearranged pendulum formula with the period squared: gexp=4π2LTexp2g_{\text{exp}} = \frac{4\pi^2 L}{T_{\text{exp}}^2} (or use gexp=ωexp2Lg_{\text{exp}} = \omega_{\text{exp}}^2 L).

  2. Substitute L=0.800 mL = 0.800\text{ m} and Texp=1.794 sT_{\text{exp}} = 1.794\text{ s}: gexp=4π2(0.800 m)(1.794 s)2g_{\text{exp}} = \frac{4\pi^2(0.800\text{ m})}{(1.794\text{ s})^2}.

  3. Evaluate the quotient: gexp=31.58273.2184≈9.81 m/s2g_{\text{exp}} = \frac{31.5827}{3.2184} \approx 9.81\text{ m/s}^2.

Final answer

gexp=9.81 m/s2g_{\text{exp}} = 9.81\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a quick dimensional analysis whenever you derive a formula from scratch to verify the power of time matches the expected physical quantity.

  • Alternatively, compute g=ω2Lg = \omega^2 L directly using your calculated angular frequency ωexp=3.502 rad/s\omega_{\text{exp}} = 3.502\text{ rad/s} to minimize algebraic rearrangement errors.

Lock it in

Similar question

01

A simple pendulum consists of a thin cord of length l=98.2 cml = 98.2\text{ cm} attached to a solid brass sphere of diameter d=3.60 cmd = 3.60\text{ cm}. Find the effective length LL in meters.

Answer

L=1.000 mL = 1.000\text{ m}. Key steps: r=d2=1.80 cmr = \frac{d}{2} = 1.80\text{ cm}; L=98.2 cm+1.80 cm=100.0 cm=1.000 mL = 98.2\text{ cm} + 1.80\text{ cm} = 100.0\text{ cm} = 1.000\text{ m}.

02

In a pendulum experiment, a spherical bob of diameter d=4.00 cmd = 4.00\text{ cm} hangs from a string. If the effective center-of-mass length is L=1.250 mL = 1.250\text{ m}, what was the length of the string alone in centimeters?

Answer

lstring=123.0 cml_{\text{string}} = 123.0\text{ cm}. Key steps: r=4.00 cm2=2.00 cm=0.020 mr = \frac{4.00\text{ cm}}{2} = 2.00\text{ cm} = 0.020\text{ m}; lstring=L−r=1.250 m−0.020 m=1.230 m=123.0 cml_{\text{string}} = L - r = 1.250\text{ m} - 0.020\text{ m} = 1.230\text{ m} = 123.0\text{ cm}.

03

A student measures the period of a pendulum as T=2.00 sT = 2.00\text{ s}. The string length is 97.0 cm97.0\text{ cm} and the spherical bob has diameter 4.0 cm4.0\text{ cm}. Compare the value of gg obtained using the correct effective length versus the flawed length where the full diameter is added.

Answer

Correct g=9.77 m/s2g = 9.77\text{ m/s}^2; flawed g=9.97 m/s2g = 9.97\text{ m/s}^2. Key steps: Correct L=97.0+2.0=99.0 cm=0.990 m  ⟹  g=4π2(0.990)2.002≈9.77 m/s2L = 97.0 + 2.0 = 99.0\text{ cm} = 0.990\text{ m} \implies g = \frac{4\pi^2(0.990)}{2.00^2} \approx 9.77\text{ m/s}^2. Flawed L′=97.0+4.0=101.0 cm=1.010 m  ⟹  g′=4π2(1.010)2.002≈9.97 m/s2L' = 97.0 + 4.0 = 101.0\text{ cm} = 1.010\text{ m} \implies g' = \frac{4\pi^2(1.010)}{2.00^2} \approx 9.97\text{ m/s}^2.

Loading workspace…