Resources
A biomedical micro-sensor tip of height is positioned on the optical axis of a concave endoscopic inspection mirror at an object distance of . The mirror has a radius of curvature given by . Converting all geometric quantities to standard SI units ( or consistent millimeters): (a) find the focal length in , (b) compute the image distance in , and (c) find the image height expressed in micrometers ().
Answer and steps
Final answer
(a) ; (b) ; (c) (inverted, real).
Steps
Identify the Sign Conventions and Convert Units
For spherical mirrors, standard sign conventions define distances in front of the reflecting surface (on the side of the incoming light) as positive:
- A concave mirror has its center of curvature and focal point in front of the mirror, so both the radius of curvature and the focal length are positive:
- The object distance is measured from the mirror vertex to the object:
- The object height is:
Determine the Focal Length
For a spherical mirror under the paraxial approximation, the focal length is half of its radius of curvature:
Substituting the value of :
Compute the Image Distance
Use the mirror equation relating focal length, object distance, and image distance:
Rearrange the equation to solve for :
Substitute the numerical values:
Note: A positive image distance () confirms that the image forms in front of the mirror and is real.
Calculate the Image Height
The lateral magnification of a spherical mirror is given by:
Substitute the calculated distances:
The height of the image relates to the object height by :
The negative sign indicates that the image is inverted relative to the object.
Typical errors
01 The student forgets to convert the radius of curvature from centimeters to millimeters, setting R = 2.40 mm and thus f = 1.20 mm.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly related focal length to the radius of curvature with , but the problem gave . Converting to millimeters gives , so .
- Step 2Correct
Your mirror equation algebra was executed cleanly, but your calculation used the incorrect focal length of from Step 1.
- Step 3Correct
Your magnification and image height formulas were completely correct, but using the downstream value produced an incorrect final height.
WHAT YOU DID WELL
Compliments from Your TeacherYou used the correct relationship between radius of curvature and focal length for a spherical mirror.
You correctly set up and rearranged the mirror equation to solve for image distance.
You correctly calculated lateral magnification and related it to image height including the proper negative sign.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou read directly as without multiplying by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou skipped an initial unit-audit step before substituting values into the mirror formulas, mixing centimeters and millimeters in the same calculation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Perform a Pre-Substitution Unit Audit
Every geometric distance in the mirror equation () must share identical units (such as all millimeters or all meters).
List every given quantity alongside its target working unit before writing out any formula: write explicitly.
- Physical Reasonableness Check
For a concave mirror, when , the image is real, inverted, and magnified ().
Compare your object distance to : here lies between and , which immediately tells you the image must be magnified, not reduced to .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert to millimeters: .
Compute the focal length: .
Substitute and into the mirror equation: , giving .
Calculate lateral magnification: .
Find the image height: .
(a) ; (b) ; (c)
02 The student assumes the focal length equals the radius of curvature rather than half of it, leading to f = 24.0 mm.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You converted centimeters to millimeters correctly, but for a spherical mirror under the paraxial approximation, the focal length is half the radius of curvature (), giving rather than .
- Step 2Correct
Your algebraic rearrangement and fraction arithmetic were carried out correctly, but the resulting value was shifted because you substituted instead of .
- Step 3Correct
You applied the magnification and image height formulas accurately, but using the incorrect image distance led to a positive, upright virtual image height instead of an inverted, real image height.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted to accurately.
You correctly stated and rearranged the mirror equation .
You correctly applied the magnification relationship and image height formula .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou equated the focal length to the full radius of curvature () rather than recognizing that parallel paraxial rays reflect through the focal point located halfway between the mirror vertex and the center of curvature ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Focal length of a spherical mirror
For any spherical mirror in the paraxial approximation, the focal length is half the radius of curvature: .
Always divide the given radius of curvature by before plugging into the mirror equation.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet .
Substitute into the mirror equation: .
Compute magnification: .
Calculate final image height: .
(a) , (b) , (c)
03 The student omits the negative sign in the transverse magnification formula for mirrors, taking m = d_i / d_o and yielding a positive upright image height.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
For spherical mirrors, lateral magnification includes an intrinsic negative sign: . Because both and are positive, , which yields an inverted image of height .
WHAT YOU DID WELL
Compliments from Your TeacherYou converted units into consistent millimeters before solving.
You correctly used the relationship between radius of curvature and focal length.
You set up and solved the mirror equation with exact fraction arithmetic.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the positive ratio rather than .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the thin lens magnification definition or absolute magnitude with the signed lateral magnification convention for spherical mirrors.
REASONING PATH
Your ACEpath teacher’s suggested approach- Spherical Mirror Magnification Sign Convention
Lateral magnification is defined as .
Always write the leading minus sign first when calculating magnification for mirrors; a positive for a real image must yield a negative (inverted) magnification.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the magnification formula for mirrors: .
Substitute the positive values: .
Multiply by the object height: .
(a) ; (b) ; (c) (inverted, real)
Lock it in
What is the critical first step before substituting , , and into the mirror equation ?
Convert all three spatial parameters (, , ) into the exact same unit of length (e.g., all or all ).
Similar question
A concave dental mirror has a radius of curvature of . An object is placed at a distance of from the vertex. Find: (a) the focal length in , and (b) the image distance in .
Answer
(a) . (b) (virtual image behind mirror).
A microscopic specimen of height is placed on the principal axis of a convex mirror at . The mirror's radius of curvature has magnitude . Calculate: (a) the focal length in , (b) the image distance in , and (c) the image height in .
Answer
(a) For a convex mirror, , so . (b) . (c) (upright, virtual).
An illuminated object is placed in front of a concave spherical mirror. A sharp real image is captured on a screen located from the mirror. (a) Determine the focal length in . (b) Find the mirror's radius of curvature in . (c) If the object is tall, find the height and orientation of the image on the screen.
Answer
(a) , . . (b) . (c) (inverted, real).