Resources

An industrial mechanical foot-treadle operating a punching die acts as a lever system with an actual mechanical advantage (AMA\text{AMA}) of 0.1800.180 and an efficiency of η=90.0%\eta = 90.0\%. During operation, the user applies an input effort force of Feffort=450 NF_{\text{effort}} = 450\text{ N} through an effort arm distance of dE=0.120 md_E = 0.120\text{ m} from the pivot. Determine: (a) the magnitude of the resistive load force FloadF_{\text{load}} produced at the die, and (b) the length of the load arm dLd_L measured from the pivot.

Answer and steps

Final answer

(a) Fload=81.0 NF_{\text{load}} = 81.0\text{ N}; (b) dL=0.600 md_L = 0.600\text{ m}

Steps

Part (a): Determining the Resistive Load Force (FloadF_{\text{load}})

The Actual Mechanical Advantage (AMA\text{AMA}) of any machine is defined as the ratio of the output force (the resistive load force, FloadF_{\text{load}}) to the input force (the applied effort, FeffortF_{\text{effort}}):

AMA=FloadFeffort\text{AMA} = \frac{F_{\text{load}}}{F_{\text{effort}}}

Rearranging to solve for the output force:

Fload=AMA⋅FeffortF_{\text{load}} = \text{AMA} \cdot F_{\text{effort}}

Substitute the given values:

Fload=0.180⋅450 N=81.0 NF_{\text{load}} = 0.180 \cdot 450\text{ N} = 81.0\text{ N}


Part (b): Determining the Load Arm Length (dLd_L)

The efficiency (η\eta) of a machine relates its actual mechanical advantage to its Ideal Mechanical Advantage (IMA\text{IMA}), which represents the performance of the machine under frictionless, ideal conditions:

η=AMAIMA\eta = \frac{\text{AMA}}{\text{IMA}}

Convert the percentage efficiency to a decimal: η=90.0%=0.900\eta = 90.0\% = 0.900. Solving for IMA\text{IMA}:

IMA=AMAη=0.1800.900=0.200\text{IMA} = \frac{\text{AMA}}{\eta} = \frac{0.180}{0.900} = 0.200

For a lever, the ideal mechanical advantage depends solely on its geometry—specifically, the ratio of the effort arm length (dEd_E) to the load arm length (dLd_L) from the pivot:

IMA=dEdL\text{IMA} = \frac{d_E}{d_L}

Rearranging to solve for the load arm length (dLd_L):

dL=dEIMA=0.120 m0.200=0.600 md_L = \frac{d_E}{\text{IMA}} = \frac{0.120\text{ m}}{0.200} = 0.600\text{ m}

Common Pitfall: When a mechanical advantage is less than 11 (AMA<1\text{AMA} < 1), the machine is designed to multiply speed or displacement rather than force. Avoid inverting the ratio: the effort arm remains in the numerator of IMA=dEdL\text{IMA} = \frac{d_E}{d_L}, leading correctly to a load arm longer than the effort arm (0.600 m>0.120 m0.600\text{ m} > 0.120\text{ m}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the relationship between mechanical advantage and forces by multiplying the effort force by efficiency or dividing by AMA.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    AMA=Feffort/Fload  ⟹  Fload=Feffort/AMA=450/0.180=2500 N\text{AMA} = F_{\text{effort}} / F_{\text{load}} \implies F_{\text{load}} = F_{\text{effort}} / \text{AMA} = 450 / 0.180 = 2500\text{ N}

    Correct

    AMA=FloadFeffort  ⟹  Fload=AMA⋅Feffort=0.180⋅450 N=81.0 N\text{AMA} = \frac{F_{\text{load}}}{F_{\text{effort}}} \implies F_{\text{load}} = \text{AMA} \cdot F_{\text{effort}} = 0.180 \cdot 450\text{ N} = 81.0\text{ N}

    Actual mechanical advantage is always the ratio of output force (load) to input force (effort): AMA=FloadFeffort\text{AMA} = \frac{F_{\text{load}}}{F_{\text{effort}}}. Because AMA<1\text{AMA} < 1, the machine trades force for distance, meaning the load force must be smaller than the effort force.

  2. Step 2

    IMA=AMAη=0.1800.900=0.200\text{IMA} = \frac{\text{AMA}}{\eta} = \frac{0.180}{0.900} = 0.200

  3. Step 3

    IMA=dEdL  ⟹  dL=dEIMA=0.1200.200=0.600 m\text{IMA} = \frac{d_E}{d_L} \implies d_L = \frac{d_E}{\text{IMA}} = \frac{0.120}{0.200} = 0.600\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the ideal mechanical advantage using the machine's efficiency.

You correctly set up the geometric ratio of effort arm to load arm for a lever.

You accurately solved for the load arm length in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Mechanical Advantage Force Ratio

You set AMA=FeffortFload\text{AMA} = \frac{F_{\text{effort}}}{F_{\text{load}}} instead of FloadFeffort\frac{F_{\text{load}}}{F_{\text{effort}}}, which multiplied the output force rather than reducing it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing input and output roles in the force definition of mechanical advantage, specifically forgetting that mechanical advantage measures output produced per unit of input applied (Fout/FinF_{\text{out}} / F_{\text{in}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define AMA as Output over Input
  • AMA=FoutputFinput=FloadFeffort\text{AMA} = \frac{F_{\text{output}}}{F_{\text{input}}} = \frac{F_{\text{load}}}{F_{\text{effort}}}.

  • Always write 'output over input' before substituting values into any mechanical advantage equation.

Physical Reality Check for MA < 1
  • When MA<1\text{MA} < 1, the machine reduces force to gain speed or displacement (Fload<FeffortF_{\text{load}} < F_{\text{effort}} and dL>dEd_L > d_E).

  • Verify that your calculated load force is smaller than the effort force whenever AMA<1\text{AMA} < 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the standard definition of actual mechanical advantage: AMA=FloadFeffort\text{AMA} = \frac{F_{\text{load}}}{F_{\text{effort}}}.

  2. Multiply both sides by FeffortF_{\text{effort}} to isolate the load force: Fload=AMA⋅FeffortF_{\text{load}} = \text{AMA} \cdot F_{\text{effort}}.

  3. Substitute AMA=0.180\text{AMA} = 0.180 and Feffort=450 NF_{\text{effort}} = 450\text{ N}: Fload=0.180⋅450 N=81.0 NF_{\text{load}} = 0.180 \cdot 450\text{ N} = 81.0\text{ N}.

Final answer

(a) Fload=81.0 NF_{\text{load}} = 81.0\text{ N}; (b) dL=0.600 md_L = 0.600\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize mechanical advantage as 'Load over Effort' (L/EL/E) for forces, but 'Effort distance over Load distance' (E/LE/L) for lever arms.

  • Review the distinction between speed-multiplying levers (MA<1\text{MA} < 1, like tweezers or foot treadles) and force-multiplying levers (MA>1\text{MA} > 1, like crowbars).

OverviewACEpath Teacher's Diagnosis

02 The student assumes the system is ideal and directly equates the ratio of lever arms to AMA instead of accounting for efficiency to find IMA.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    AMA=FloadFeffort  ⟹  Fload=AMA∗Feffort=0.180∗450=81.0 N\text{AMA} = \frac{F_{\text{load}}}{F_{\text{effort}}} \implies F_{\text{load}} = \text{AMA} * F_{\text{effort}} = 0.180 * 450 = 81.0\text{ N}

  2. Step 2

    dEdL=AMA  ⟹  dL=dEAMA\frac{d_E}{d_L} = \text{AMA} \implies d_L = \frac{d_E}{\text{AMA}}

    Correct

    IMA=AMAη=0.1800.900=0.200  ⟹  dEdL=IMA  ⟹  dL=dEIMA\text{IMA} = \frac{\text{AMA}}{\eta} = \frac{0.180}{0.900} = 0.200 \implies \frac{d_E}{d_L} = \text{IMA} \implies d_L = \frac{d_E}{\text{IMA}}

    The ratio of the lever arm distances dEdL\frac{d_E}{d_L} determines the Ideal Mechanical Advantage (IMA\text{IMA}), which represents purely geometric, lossless motion. Because the machine has an efficiency of η=90.0%\eta = 90.0\%, you must divide AMA\text{AMA} by η\eta to find IMA\text{IMA} before using the lever arms.

  3. Step 3

    dL=0.1200.180  ⟹  dL=0.667 md_L = \frac{0.120}{0.180} \implies d_L = 0.667\text{ m}

    Correct

    dL=0.120 m0.200=0.600 md_L = \frac{0.120\text{ m}}{0.200} = 0.600\text{ m}

    Your algebraic rearrangement and substitution were carried out correctly, but the numerical result is off because it used AMA=0.180\text{AMA} = 0.180 instead of IMA=0.200\text{IMA} = 0.200.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of actual mechanical advantage as the ratio of load force to effort force.

You accurately calculated the load force of 81.0 N81.0\text{ N}.

You correctly identified the inverse geometric relationship between lever arm lengths and mechanical advantage.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting efficiency when relating geometry to mechanical advantage

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the geometric lever arm ratio equals the actual mechanical advantage (AMA\text{AMA}), overlooking that physical arm lengths reflect ideal mechanical advantage (IMA\text{IMA}), which requires adjusting for efficiency (η\eta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Forces vs. Distances
  • AMA=FloadFeffort\text{AMA} = \frac{F_{\text{load}}}{F_{\text{effort}}} is based on actual measured forces, while IMA=dEdL\text{IMA} = \frac{d_E}{d_L} is based purely on machine geometry.

  • Whenever machine efficiency is not 100%100\%, calculate IMA=AMAη\text{IMA} = \frac{\text{AMA}}{\eta} before setting up geometric lever ratios.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the efficiency to decimal form: η=90.0%=0.900\eta = 90.0\% = 0.900.

  2. Determine the ideal mechanical advantage: IMA=AMAη=0.1800.900=0.200\text{IMA} = \frac{\text{AMA}}{\eta} = \frac{0.180}{0.900} = 0.200.

  3. Apply the geometric lever equation: IMA=dEdL  ⟹  dL=dEIMA\text{IMA} = \frac{d_E}{d_L} \implies d_L = \frac{d_E}{\text{IMA}}.

  4. Substitute the given effort arm length: dL=0.120 m0.200=0.600 md_L = \frac{0.120\text{ m}}{0.200} = 0.600\text{ m}.

Final answer

(a) Fload=81.0 NF_{\text{load}} = 81.0\text{ N}; (b) dL=0.600 md_L = 0.600\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between AMA\text{AMA} (force ratio) and IMA\text{IMA} (distance ratio).

  • Practice using the efficiency bridge formula η=AMAIMA\eta = \frac{\text{AMA}}{\text{IMA}} before solving for lever dimensions.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the definition of mechanical advantage for lever arm lengths, using d_L / d_E instead of d_E / d_L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fload=AMA⋅Feffort=0.180⋅450=81.0 NF_{\text{load}} = \text{AMA} \cdot F_{\text{effort}} = 0.180 \cdot 450 = 81.0\text{ N}

  2. Step 2

    IMA=AMAη=0.1800.900=0.200\text{IMA} = \frac{\text{AMA}}{\eta} = \frac{0.180}{0.900} = 0.200

  3. Step 3

    IMA=dLdE\text{IMA} = \frac{d_L}{d_E}

    Correct

    IMA=dEdL\text{IMA} = \frac{d_E}{d_L}

    The ideal mechanical advantage of a lever is the ratio of the effort arm distance to the load arm distance, dEdL\frac{d_E}{d_L}, not dLdE\frac{d_L}{d_E}.

  4. Step 4

    dL=IMA⋅dE=0.200⋅0.120  ⟹  dL=0.024 md_L = \text{IMA} \cdot d_E = 0.200 \cdot 0.120 \implies d_L = 0.024\text{ m}

    Correct

    dL=dEIMA=0.120 m0.200=0.600 md_L = \frac{d_E}{\text{IMA}} = \frac{0.120\text{ m}}{0.200} = 0.600\text{ m}

    Because the formula for ideal mechanical advantage was inverted in the previous step, solving for the load arm produced 0.024 m0.024\text{ m} instead of 0.600 m0.600\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of actual mechanical advantage to solve for the resistive load force.

You properly applied the relationship between efficiency, actual mechanical advantage, and ideal mechanical advantage.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted lever mechanical advantage formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the input and output quantities when defining geometric mechanical advantage, setting IMA=dLdE\text{IMA} = \frac{d_L}{d_E} rather than dEdL\frac{d_E}{d_L}. Remember that ideal mechanical advantage is always the ratio of input displacement (effort arm) to output displacement (load arm) because conservation of energy dictates FeffortdE=FloaddLF_{\text{effort}} d_E = F_{\text{load}} d_L under ideal conditions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mechanical Advantage Ratio Anchor
  • IMA=input distanceoutput distance=dEdL\text{IMA} = \frac{\text{input distance}}{\text{output distance}} = \frac{d_E}{d_L}

  • Always verify that the effort arm dEd_E is in the numerator so that work in equals work out without friction.

Speed Multiplier Sanity Check
  • When IMA<1\text{IMA} < 1, the lever sacrifices force to gain speed or reach, meaning dL>dEd_L > d_E.

  • Check whether your calculated load arm is longer than the effort arm whenever the mechanical advantage is less than 11.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct geometric definition: IMA=dEdL\text{IMA} = \frac{d_E}{d_L}.

  2. Rearrange to solve for the load arm length: dL=dEIMAd_L = \frac{d_E}{\text{IMA}}.

  3. Substitute dE=0.120 md_E = 0.120\text{ m} and IMA=0.200\text{IMA} = 0.200: dL=0.120 m0.200=0.600 md_L = \frac{0.120\text{ m}}{0.200} = 0.600\text{ m}.

Final answer

(a) Fload=81.0 NF_{\text{load}} = 81.0\text{ N}; (b) dL=0.600 md_L = 0.600\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the work conservation principle Feffort⋅dE=Fload⋅dLF_{\text{effort}} \cdot d_E = F_{\text{load}} \cdot d_L to derive IMA=Fload, idealFeffort=dEdL\text{IMA} = \frac{F_{\text{load, ideal}}}{F_{\text{effort}}} = \frac{d_E}{d_L}.

  • Practice identifying whether a lever multiplies force (MA>1,dE>dL\text{MA} > 1, d_E > d_L) or distance/speed (MA<1,dL>dE\text{MA} < 1, d_L > d_E).

Lock it in

Similar question

01

A third-class lever has an actual mechanical advantage of AMA=0.400\text{AMA} = 0.400. If a worker applies an effort force of Feffort=250 NF_{\text{effort}} = 250\text{ N}, what load force FloadF_{\text{load}} does the lever exert on the workpiece?

Answer

Fload=100 NF_{\text{load}} = 100\text{ N}. Using AMA=FloadFeffort\text{AMA} = \frac{F_{\text{load}}}{F_{\text{effort}}}, we get Fload=AMA⋅Feffort=0.400⋅250 N=100 NF_{\text{load}} = \text{AMA} \cdot F_{\text{effort}} = 0.400 \cdot 250\text{ N} = 100\text{ N}.

02

A bicycle pedal crank acts as a lever with IMA=0.350\text{IMA} = 0.350 and an efficiency of η=80.0%\eta = 80.0\%. (a) Find the actual mechanical advantage (AMA\text{AMA}). (b) If the rider applies an effort force of Feffort=300 NF_{\text{effort}} = 300\text{ N}, calculate the resulting drive force FloadF_{\text{load}} delivered to the chain.

Answer

(a) AMA=0.280\text{AMA} = 0.280; (b) Fload=84.0 NF_{\text{load}} = 84.0\text{ N}. First, AMA=η⋅IMA=0.800⋅0.350=0.280\text{AMA} = \eta \cdot \text{IMA} = 0.800 \cdot 0.350 = 0.280. Then, Fload=AMA⋅Feffort=0.280⋅300 N=84.0 NF_{\text{load}} = \text{AMA} \cdot F_{\text{effort}} = 0.280 \cdot 300\text{ N} = 84.0\text{ N}.

03

An industrial foot-treadle operating with an efficiency of η=85.0%\eta = 85.0\% has an effort arm of length dE=0.150 md_E = 0.150\text{ m} and a load arm of length dL=0.750 md_L = 0.750\text{ m} from the fulcrum. An operator depresses the treadle with Feffort=500 NF_{\text{effort}} = 500\text{ N}. Determine: (a) the ideal mechanical advantage (IMA\text{IMA}), (b) the actual mechanical advantage (AMA\text{AMA}), and (c) the punch force FloadF_{\text{load}} exerted by the die.

Answer

(a) IMA=0.200\text{IMA} = 0.200; (b) AMA=0.170\text{AMA} = 0.170; (c) Fload=85.0 NF_{\text{load}} = 85.0\text{ N}. Steps: IMA=dEdL=0.1500.750=0.200\text{IMA} = \frac{d_E}{d_L} = \frac{0.150}{0.750} = 0.200. Next, AMA=η⋅IMA=0.850⋅0.200=0.170\text{AMA} = \eta \cdot \text{IMA} = 0.850 \cdot 0.200 = 0.170. Finally, Fload=AMA⋅Feffort=0.170⋅500 N=85.0 NF_{\text{load}} = \text{AMA} \cdot F_{\text{effort}} = 0.170 \cdot 500\text{ N} = 85.0\text{ N}.

Loading workspace…