Resources
In an experiment mapping electrostatic fields, two concentric spherical conducting shells are held at fixed potentials. The inner shell has a radius and is held at an unknown potential . The outer shell has a radius and is grounded at . The radial electric potential in the region is governed by . A student measures the electric field magnitude at a distance from the common center to be , directed radially outward. Working backwards from this measured field strength: (a) find the net charge on the inner shell; (b) determine the initial boundary potential at the inner shell; and (c) calculate the radius of the equipotential surface where .
Answer and steps
Final answer
(a) (or ); (b) ; (c)
Steps
Part (a): Net Charge on the Inner Shell
Due to spherical symmetry, the electric field in the region between the two concentric conducting shells () depends only on the net charge enclosed by a Gaussian sphere of radius . By Gauss's Law:
where is Coulomb's constant.
Given that the field is directed radially outward, the charge on the inner shell is positive. At the measurement position , the field magnitude is :
Solving for the charge :
Part (b): Initial Boundary Potential at the Inner Shell
The general radial potential function between the shells is:
The outer shell at is grounded, setting the boundary condition :
The potential distribution in the inter-shell region is therefore:
Evaluating this expression at the inner shell radius :
Part (c): Radius of the Equipotential Surface
The potential can be expressed in terms of the geometric factor relative to the grounded boundary:
For the target equipotential surface where , the corresponding radial spacing relation gives:
Substituting ():
Taking the reciprocal to find :
Typical errors
01 The student forgets that electric field follows an inverse-square law and instead uses an inverse-first-power relation E = k Q / r, calculating a significantly smaller charge that propagates downstream.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
By Gauss's law for spherical symmetry, the electric field follows an inverse-square law rather than an inverse-first-power law . Missing the squared term in produced a charge value that is too large by a factor of .
- Step 2Correct
Your boundary-condition method at and evaluation at were completely sound, but the numerical answer for was affected by the incorrect value of from Step 1.
- Step 3Correct
Your algebraic setup and rearrangement to find the equipotential radius were entirely correct, but your final answer inherited the earlier error in and .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the grounded boundary condition to determine the integration constant .
You accurately evaluated the potential at the inner shell radius to solve for .
You correctly set the potential expression equal to and inverted the relation to solve for .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of , forgetting to square the radial distance when calculating the electric field.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the radial dependence of electric field with electric potential (or with the field of a continuous line charge). In spherically symmetric systems, Gauss's law over a sphere of area dictates an inverse-square dependence for .
REASONING PATH
Your ACEpath teacher’s suggested approach- Gauss's Law Flux Area Check
For spherical symmetry, electric flux through a Gaussian sphere is , giving .
Always write down the Gaussian surface area before isolating , ensuring the denominator has .
- Dimensional Consistency Check
Electric field has units of or , while has units of (electric potential).
Check units: dividing potential () by distance () gives in .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the inverse-square law for the spherically symmetric field: , so .
Calculate the net charge: .
Apply the boundary condition at the grounded outer shell: .
Determine the inner shell potential: .
Solve for the equipotential surface where : .
(a) ; (b) ; (c)
02 The student forgets to apply the outer boundary condition to find the constant C, assuming V goes to zero at infinity (C = 0), which leads to incorrect potentials and radius.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You omitted the boundary condition constant . The problem defines with the outer shell grounded at , which requires setting rather than assuming .
- Step 3Correct
Because you used the formula without the reference potential constant , your calculation yielded , which contradicts the given boundary condition that the outer shell at is at .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that spherical symmetry allows Gauss's Law to relate to the inner shell charge .
You accurately substituted the measured field value and converted the radius to meters to determine .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the additive constant given in the potential equation .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou defaulted to the textbook point-charge formula where potential is referenced to zero at infinity, overlooking that physical conducting boundaries (such as a grounded outer shell) fix the zero-potential reference at a finite radius.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Reference Point
Whenever an electrostatic system includes a grounded conductor, that conductor's location defines , not infinity.
Substitute into to solve explicitly for before calculating potentials at other points.
- Sanity Check Boundary Values
A calculated equipotential surface cannot coincide with a boundary held at a different potential.
Notice that your result placed a equipotential directly on the shell grounded at , signaling an unadjusted constant.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the outer boundary condition where : .
Write the complete potential function for : .
Evaluate at the inner radius : .
Set using the potential relative to the grounded shell: .
Solve for the equipotential radius: .
(a) ; (b) ; (c)
03 The student forgets to convert the distance from centimeters to meters when computing the electric field and charge, using r = 5.00 instead of 0.0500 m.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly solved Gauss's Law for , but you substituted instead of converting to . Because is squared, using centimeters resulted in a value times too large.
- Step 2Correct
Your reasoning and boundary conditions for and are mathematically sound, and you properly converted and to meters. The numerical values of and are incorrect solely due to carrying forward the oversized charge from Step 1.
- Step 3Correct
Your formulation for the equipotential radius was correct, but the carried-over value of rather than led to an incorrect radius.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied Gauss's law relation for the spherical field.
You properly applied the grounded outer boundary condition to find the integration constant .
You correctly converted centimeters to meters when working with and in Parts (b) and (c).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou forgot to convert the measurement radius to meters before squaring it in Part (a).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisInconsistency in unit discipline: converting boundary radii and to SI units in later steps while overlooking the unit of the initial field measurement position .
REASONING PATH
Your ACEpath teacher’s suggested approach- Standard SI Unit Check
Coulomb's constant requires distances to be expressed in meters ().
Always convert centimeters to meters () before evaluating field and potential formulas.
- Order-of-Magnitude Sanity Check
Laboratory electrostatic potentials on small conducting spheres are typically in the range of tens to hundreds of volts, not hundreds of kilovolts.
If your intermediate potential reaches values like from a modest field over a few centimeters, pause to re-check your distance units.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert to .
Recalculate , which yields .
Substitute into the grounded boundary condition: .
Evaluate the inner shell potential: .
Find for : .
(a) (or ); (b) ; (c)
Lock it in
For a spherically symmetric charge , how do the electric field magnitude and electric potential depend on radial distance ?
(inverse-square law) while (inverse-first-power law). Remember: , so differentiating introduces the extra factor of .
Similar question
A small conducting sphere has an unknown positive charge . At a distance of from its center, the electric field magnitude is measured to be . Calculate the net charge on the sphere (use ).
Answer
.
Two concentric spherical shells have radii and . The outer shell is grounded (). The electric field between the shells is at . Determine: (a) the product , (b) the potential of the inner shell, and (c) the radius of the equipotential surface where .
Answer
(a) .\n(b) Since , . At , .\n(c) .
A spherical conductor of radius is enclosed by a grounded concentric conducting shell of radius . If the potential difference between the shells is , calculate: (a) the electric field magnitude just outside the inner sphere at , and (b) the radius of the equipotential surface where the potential is exactly half of the inner shell's potential ().
Answer
(a) Potential function is . At : . Then .\n(b) For : .