Resources

Consider a particle moving in a plane between two distinct points P1P_1 and P2P_2 over a time interval Δt>0\Delta t > 0. Let ss denote the scalar path length (distance) traveled, and let Δr⃗\Delta \vec{r} denote the displacement vector. (a) State the fundamental geometric inequality relating the scalar distance ss and the magnitude of the displacement vector ∣Δr⃗∣|\Delta \vec{r}|. (b) What exact physical and kinematic condition must be met for the equality s=∣Δr⃗∣s = |\Delta \vec{r}| to hold? (c) A particle moves along the xx-axis from x=0.00 mx = 0.00\text{ m} to x=12.0 mx = 12.0\text{ m} and immediately reverses direction, traveling back to x=7.00 mx = 7.00\text{ m} in a total time of Δt=5.00 s\Delta t = 5.00\text{ s}. Compute the ratio s∣Δr⃗∣\frac{s}{|\Delta \vec{r}|} and the magnitude of the average velocity ∣v⃗avg∣|\vec{v}_{\text{avg}}| versus the average scalar speed vavgv_{\text{avg}}.

Answer and steps

Final answer

(a) s≥∣Δr⃗∣s \ge |\Delta \vec{r}|; (b) The particle must move along a strictly straight line without reversing direction (s=∣Δr⃗∣s = |\Delta \vec{r}| if and only if the direction of motion is constant throughout Δt\Delta t); (c) s∣Δr⃗∣=17.0 m7.00 m≈2.43\frac{s}{|\Delta \vec{r}|} = \frac{17.0\text{ m}}{7.00\text{ m}} \approx 2.43, ∣v⃗avg∣=1.40 m/s|\vec{v}_{\text{avg}}| = 1.40\text{ m/s}, and vavg=3.40 m/sv_{\text{avg}} = 3.40\text{ m/s}.

Steps

01

Total Distance Traveled (ss)

Part (a): Fundamental Geometric Inequality

The displacement vector Δr⃗\Delta \vec{r} represents the straight-line directed segment connecting the initial point P1P_1 to the final point P2P_2: Δr⃗=r⃗2−r⃗1\Delta \vec{r} = \vec{r}_2 - \vec{r}_1 Its magnitude ∣Δr⃗∣|\Delta \vec{r}| is the shortest straight-line Euclidean distance between these two endpoints. The path length (distance traveled) ss is the integral of the speed over time along the actual trajectory: s=∫t1t2∣v⃗(t)∣ dt=∫P1P2dls = \int_{t_1}^{t_2} |\vec{v}(t)|\, dt = \int_{P_1}^{P_2} dl Because the shortest path between any two points in Euclidean space is a straight line, the actual path length can never be shorter than the straight-line distance: s≥∣Δr⃗∣s \ge |\Delta \vec{r}|

Part (b): Condition for Equality

For the equality s=∣Δr⃗∣s = |\Delta \vec{r}| to hold:

  1. Straight-line path: Any curvature in the trajectory adds extra length relative to the direct straight line, which makes s>∣Δr⃗∣s > |\Delta \vec{r}|.
  2. No reversal of direction: If a particle moves along a straight line but turns around, the forward and backward segments add together in the scalar distance ss, but cancel each other out in the net displacement vector Δr⃗\Delta \vec{r}. Therefore, the equality s=∣Δr⃗∣s = |\Delta \vec{r}| holds if and only if the particle moves along a strictly straight path in a single, unchanging direction throughout the entire time interval Δt\Delta t.

Part (c): Calculations for One-Dimensional Motion

The particle undergoes two consecutive segments of motion:

  • Forward segment: from x1=0.00 mx_1 = 0.00\text{ m} to x2=12.0 mx_2 = 12.0\text{ m} s1=∣12.0 m−0.00 m∣=12.0 ms_1 = |12.0\text{ m} - 0.00\text{ m}| = 12.0\text{ m}
  • Return segment: from x2=12.0 mx_2 = 12.0\text{ m} to x3=7.00 mx_3 = 7.00\text{ m} s2=∣7.00 m−12.0 m∣=5.00 ms_2 = |7.00\text{ m} - 12.0\text{ m}| = 5.00\text{ m}

Total scalar distance: s=s1+s2=12.0 m+5.00 m=17.0 ms = s_1 + s_2 = 12.0\text{ m} + 5.00\text{ m} = 17.0\text{ m}

02

Net Displacement (Δr⃗\Delta \vec{r})

Displacement depends only on the initial and final positions, regardless of the intermediate path: Δx=xfinal−xinitial=7.00 m−0.00 m=+7.00 m\Delta x = x_{\text{final}} - x_{\text{initial}} = 7.00\text{ m} - 0.00\text{ m} = +7.00\text{ m} ∣Δr⃗∣=7.00 m|\Delta \vec{r}| = 7.00\text{ m}

03

Ratio of Distance to Displacement

s∣Δr⃗∣=17.0 m7.00 m≈2.43\frac{s}{|\Delta \vec{r}|} = \frac{17.0\text{ m}}{7.00\text{ m}} \approx 2.43

04

Magnitude of Average Velocity (∣v⃗avg∣|\vec{v}_{\text{avg}}|)

Average velocity is defined by the net displacement divided by elapsed time: v⃗avg=Δr⃗Δt=+7.00 m5.00 s i^=+1.40 i^ m/s\vec{v}_{\text{avg}} = \frac{\Delta \vec{r}}{\Delta t} = \frac{+7.00\text{ m}}{5.00\text{ s}}\,\hat{i} = +1.40\,\hat{i}\text{ m/s} ∣v⃗avg∣=∣Δr⃗∣Δt=7.00 m5.00 s=1.40 m/s|\vec{v}_{\text{avg}}| = \frac{|\Delta \vec{r}|}{\Delta t} = \frac{7.00\text{ m}}{5.00\text{ s}} = 1.40\text{ m/s}

05

Average Scalar Speed (vavgv_{\text{avg}})

Average speed is defined as the total distance divided by elapsed time: vavg=sΔt=17.0 m5.00 s=3.40 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{17.0\text{ m}}{5.00\text{ s}} = 3.40\text{ m/s}

Pitfall Note: Average speed is generally not equal to the magnitude of average velocity (vavg≥∣v⃗avg∣v_{\text{avg}} \ge |\vec{v}_{\text{avg}}|), because average speed tracks total path length rather than net displacement.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses total distance with net displacement, calculating distance as the final position minus initial position.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    s≥∣Δr∣s \ge |\Delta r|

  2. Step 2

    The particle moves along a straight line without reversing direction.

  3. Step 3

    s=7.00 m−0.00 m=7.00 ms = 7.00\text{ m} - 0.00\text{ m} = 7.00\text{ m}

    Correct

    s=∣12.0 m−0.00 m∣+∣7.00 m−12.0 m∣=12.0 m+5.00 m=17.0 ms = |12.0\text{ m} - 0.00\text{ m}| + |7.00\text{ m} - 12.0\text{ m}| = 12.0\text{ m} + 5.00\text{ m} = 17.0\text{ m}

    You treated scalar distance as if it were displacement by subtracting the initial position from the final position. Distance is the total cumulative path length, so you must add the absolute lengths of the forward segment (12.0 m12.0\text{ m}) and the return segment (5.00 m5.00\text{ m}).

  4. Step 4

    ∣Δr∣=7.00 m−0.00 m=7.00 m|\Delta r| = 7.00\text{ m} - 0.00\text{ m} = 7.00\text{ m}

  5. Step 5

    s∣Δr∣=7.00 m7.00 m=1.00\frac{s}{|\Delta r|} = \frac{7.00\text{ m}}{7.00\text{ m}} = 1.00

    Correct

    s∣Δr⃗∣=17.0 m7.00 m≈2.43\frac{s}{|\Delta \vec{r}|} = \frac{17.0\text{ m}}{7.00\text{ m}} \approx 2.43

    Your division step was carried out correctly, but your result was affected by the incorrect value of ss from Step 3.

  6. Step 6

    ∣vavg∣=7.00 m5.00 s=1.40 m/s|v_{\text{avg}}| = \frac{7.00\text{ m}}{5.00\text{ s}} = 1.40\text{ m/s}

  7. Step 7

    vavg=7.00 m5.00 s=1.40 m/sv_{\text{avg}} = \frac{7.00\text{ m}}{5.00\text{ s}} = 1.40\text{ m/s}

    Correct

    vavg=sΔt=17.0 m5.00 s=3.40 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{17.0\text{ m}}{5.00\text{ s}} = 3.40\text{ m/s}

    You correctly applied the formula vavg=sΔtv_{\text{avg}} = \frac{s}{\Delta t}, but your final value was affected by your earlier calculation of ss.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the relationship s≥∣Δr⃗∣s \ge |\Delta \vec{r}|.

You accurately identified that unidirectional, straight-line motion is required for distance to equal displacement magnitude.

You correctly determined the net displacement and the magnitude of the average velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distance vs. Displacement Confusion

You used the displacement formula xfinal−xinitialx_{\text{final}} - x_{\text{initial}} to compute the scalar distance ss, missing the extra distance accumulated during the turnaround.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the state-function nature of displacement (which depends only on endpoints) with the path-dependent nature of distance (which accumulates the magnitude of every segment along the journey).

REASONING PATH
Your ACEpath teacher’s suggested approach
Displacement is Endpoint-Based
  • Δr⃗=r⃗final−r⃗initial\Delta \vec{r} = \vec{r}_{\text{final}} - \vec{r}_{\text{initial}} depends strictly on where you start and where you finish.

  • Find endpoints first: Δx=7.00 m−0.00 m=+7.00 m\Delta x = 7.00\text{ m} - 0.00\text{ m} = +7.00\text{ m}.

Distance is Cumulative
  • s=∑∣Δxi∣s = \sum |\Delta x_i| is always non-negative and adds up every segment traveled, regardless of direction.

  • Split the journey at every turnaround point: s=∣12.0−0.00∣+∣7.00−12.0∣=12.0+5.00=17.0 ms = |12.0 - 0.00| + |7.00 - 12.0| = 12.0 + 5.00 = 17.0\text{ m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sum the distances of all individual motion segments: s=∣12.0 m−0.00 m∣+∣7.00 m−12.0 m∣=12.0 m+5.00 m=17.0 ms = |12.0\text{ m} - 0.00\text{ m}| + |7.00\text{ m} - 12.0\text{ m}| = 12.0\text{ m} + 5.00\text{ m} = 17.0\text{ m}.

  2. Compute the ratio: s∣Δr⃗∣=17.0 m7.00 m≈2.43\frac{s}{|\Delta \vec{r}|} = \frac{17.0\text{ m}}{7.00\text{ m}} \approx 2.43.

  3. Compute average speed: vavg=sΔt=17.0 m5.00 s=3.40 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{17.0\text{ m}}{5.00\text{ s}} = 3.40\text{ m/s}.

Final answer

s∣Δr⃗∣≈2.43\frac{s}{|\Delta \vec{r}|} \approx 2.43, ∣v⃗avg∣=1.40 m/s|\vec{v}_{\text{avg}}| = 1.40\text{ m/s}, vavg=3.40 m/sv_{\text{avg}} = 3.40\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Whenever a particle changes direction, mark all turnaround points on a simple number line.

  • Calculate scalar distance ss by taking the absolute value of each leg's displacement and adding them together.

  • Remember that average speed uses total distance (vavg=s/Δtv_{\text{avg}} = s / \Delta t), while average velocity uses net displacement (v⃗avg=Δr⃗/Δt\vec{v}_{\text{avg}} = \Delta \vec{r} / \Delta t).

OverviewACEpath Teacher's Diagnosis

02 The student assumes average speed is the magnitude of average velocity rather than scalar distance divided by total time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    s≥∣Δr∣s \ge |\Delta r|; The motion must follow a straight line with no direction reversal.

  2. Step 2

    s=12.0 m+5.00 m=17.0 m  ⟹  ∣Δr∣=7.00 m−0.00 m=7.00 m  ⟹  s∣Δr∣=17.07.00=2.43s = 12.0\text{ m} + 5.00\text{ m} = 17.0\text{ m} \implies |\Delta r| = 7.00\text{ m} - 0.00\text{ m} = 7.00\text{ m} \implies \frac{s}{|\Delta r|} = \frac{17.0}{7.00} = 2.43

  3. Step 3

    |v_{avg\text{avg}}| = 7.00 m5.00 s\frac{7.00\text{ m}}{5.00\text{ s}} = 1.40 m/s\text{ m/s}_

  4. Step 4

    v_{avg\text{avg}} = |v_{avg\text{avg}}| = 1.40 m/s\text{ m/s}

    Correct

    v_{avg\text{avg}} = sΔt\frac{s}{\Delta t} = 17.0 m5.00 s\frac{17.0\text{ m}}{5.00\text{ s}} = 3.40 m/s\text{ m/s}_

    You assumed that average speed equals the magnitude of average velocity. While instantaneous speed equals instantaneous velocity magnitude (v(t)=∣v⃗(t)∣v(t) = |\vec{v}(t)|), average speed is defined as total scalar distance divided by total elapsed time: vavg=sΔtv_{\text{avg}} = \frac{s}{\Delta t}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the fundamental geometric inequality s≥∣Δr⃗∣s \ge |\Delta \vec{r}|.

You accurately specified that straight-line motion with no reversal is required for s=∣Δr⃗∣s = |\Delta \vec{r}|.

You computed the total distance s=17.0 ms = 17.0\text{ m}, the net displacement ∣Δr⃗∣=7.00 m|\Delta \vec{r}| = 7.00\text{ m}, and their ratio accurately.

You correctly computed the magnitude of average velocity as ∣v⃗avg∣=1.40 m/s|\vec{v}_{\text{avg}}| = 1.40\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Average Speed with Average Velocity Magnitude

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the instantaneous kinematic property (where instantaneous speed equals the magnitude of instantaneous velocity, v(t)=∣v⃗(t)∣v(t) = |\vec{v}(t)|) with the average kinematic definitions, where average speed depends on scalar path length (s/Δts/\Delta t) while average velocity depends on net vector displacement (Δr⃗/Δt\Delta \vec{r}/\Delta t).

REASONING PATH
Your ACEpath teacher’s suggested approach
Average Speed Definition
  • vavg=sΔtv_{\text{avg}} = \frac{s}{\Delta t}, where ss is the total scalar path length.

  • Always divide total distance by total time to find average speed; do not equate it to ∣v⃗avg∣|\vec{v}_{\text{avg}}| whenever direction changes.

Average Velocity Magnitude Definition
  • ∣v⃗avg∣=∣Δr⃗∣Δt|\vec{v}_{\text{avg}}| = \frac{|\Delta \vec{r}|}{\Delta t}, where ∣Δr⃗∣|\Delta \vec{r}| is the magnitude of net displacement.

  • Use net straight-line displacement between endpoints only when computing average velocity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. vavg=sΔt=17.0 m5.00 s=3.40 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{17.0\text{ m}}{5.00\text{ s}} = 3.40\text{ m/s}

Final answer

(a) s≥∣Δr⃗∣s \ge |\Delta \vec{r}|; (b) The particle must move along a strictly straight line without reversing direction; (c) s∣Δr⃗∣≈2.43\frac{s}{|\Delta \vec{r}|} \approx 2.43, ∣v⃗avg∣=1.40 m/s|\vec{v}_{\text{avg}}| = 1.40\text{ m/s}, and vavg=3.40 m/sv_{\text{avg}} = 3.40\text{ m/s}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinct definitions: average speed is a scalar quantity tracking total odometer distance over time, whereas average velocity is a vector tracking net position change over time.

  • Whenever motion involves a turn-around or curved path, remember that vavg>∣v⃗avg∣v_{\text{avg}} > |\vec{v}_{\text{avg}}| because s>∣Δr⃗∣s > |\Delta \vec{r}|.

OverviewACEpath Teacher's Diagnosis

03 The student states only that the path must be a straight line, omitting the necessary condition that motion cannot reverse direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    s≥∣Δr∣s \ge |\Delta r|

  2. Step 2

    The particle must move along a straight-line trajectory.

    Correct

    The particle must move along a strictly straight line in a single, unchanging direction without reversing.

    A straight-line trajectory is necessary, but not sufficient on its own. If an object moves back and forth along a straight line, the distance ss continues to accumulate while the displacement ∣Δr⃗∣|\Delta \vec{r}| decreases due to cancellation.

  3. Step 3

    s=12.0 m+5.00 m=17.0 m  ⟹  ∣Δr∣=7.00 m  ⟹  s∣Δr∣=17.07.00=2.43s = 12.0\text{ m} + 5.00\text{ m} = 17.0\text{ m} \implies |\Delta r| = 7.00\text{ m} \implies \frac{s}{|\Delta r|} = \frac{17.0}{7.00} = 2.43

  4. Step 4

    ∣vavg∣=7.00 m5.00 s=1.40 m/s  ⟹  vavg=17.0 m5.00 s=3.40 m/s|v_{\text{avg}}| = \frac{7.00\text{ m}}{5.00\text{ s}} = 1.40\text{ m/s} \implies v_{\text{avg}} = \frac{17.0\text{ m}}{5.00\text{ s}} = 3.40\text{ m/s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the fundamental geometric inequality s≥∣Δr⃗∣s \ge |\Delta \vec{r}|.

You accurately calculated both the total path length and the net displacement magnitude for the one-dimensional motion.

You correctly used the proper definitions and units to compute the average velocity magnitude and the average speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incomplete condition for equality of distance and displacement

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You focused solely on spatial path curvature (straight line vs. curved line) and overlooked that motion along a single straight line can still turn around, causing distance and displacement magnitude to diverge.

REASONING PATH
Your ACEpath teacher’s suggested approach
Straight Path vs. Unidirectional Motion
  • For s=∣Δr⃗∣s = |\Delta \vec{r}|, the velocity vector must not change direction: v^(t)=constant\hat{v}(t) = \text{constant} for all t∈[t1,t2]t \in [t_1, t_2].

  • Whenever stating conditions for s=∣Δr⃗∣s = |\Delta \vec{r}|, check both path geometry (straight line) and kinematics (no direction reversal).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State that the trajectory must be a straight line.

  2. State that the particle must travel in a single, unchanging direction along that line throughout Δt\Delta t.

Final answer

The particle must move along a strictly straight line without reversing direction (s=∣Δr⃗∣s = |\Delta \vec{r}| if and only if the velocity vector points in a constant direction throughout Δt\Delta t).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how direction reversals in 1D motion cause path length s=∫∣v∣ dts = \int |v|\,dt to exceed displacement ∣Δx∣=∣∫v dt∣|\Delta x| = |\int v\,dt|.

  • Practice identifying conditions where scalar rates equal vector magnitudes.

Lock it in

Similar question

01

A particle moves along the yy-axis from y=2.0 my = 2.0\text{ m} to y=10.0 my = 10.0\text{ m}, then turns around and moves to y=−4.0 my = -4.0\text{ m} in 6.0 s6.0\text{ s}. Calculate (a) the net displacement Δy\Delta y, (b) the total distance traveled ss, and (c) the average speed vavgv_{\text{avg}}.

Answer

(a) Δy=yf−yi=−4.0 m−2.0 m=−6.0 m\Delta y = y_f - y_i = -4.0\text{ m} - 2.0\text{ m} = -6.0\text{ m}. (b) Segment 1: ∣10.0−2.0∣=8.0 m|10.0 - 2.0| = 8.0\text{ m}; Segment 2: ∣−4.0−10.0∣=14.0 m|-4.0 - 10.0| = 14.0\text{ m}; Total distance s=8.0+14.0=22.0 ms = 8.0 + 14.0 = 22.0\text{ m}. (c) vavg=sΔt=22.0 m6.0 s≈3.67 m/sv_{\text{avg}} = \frac{s}{\Delta t} = \frac{22.0\text{ m}}{6.0\text{ s}} \approx 3.67\text{ m/s}.

02

A drone flies 30.0 m30.0\text{ m} East, then 40.0 m40.0\text{ m} North over a time interval of 10.0 s10.0\text{ s}. Compute (a) the total scalar distance ss, (b) the magnitude of the displacement vector ∣Δr⃗∣|\Delta \vec{r}|, and (c) the ratio of average speed to the magnitude of average velocity vavg∣v⃗avg∣\frac{v_{\text{avg}}}{|\vec{v}_{\text{avg}}|}.

Answer

(a) s=30.0 m+40.0 m=70.0 ms = 30.0\text{ m} + 40.0\text{ m} = 70.0\text{ m}. (b) ∣Δr⃗∣=(30.0)2+(40.0)2=50.0 m|\Delta \vec{r}| = \sqrt{(30.0)^2 + (40.0)^2} = 50.0\text{ m}. (c) vavg∣v⃗avg∣=s/Δt∣Δr⃗∣/Δt=s∣Δr⃗∣=70.0 m50.0 m=1.40\frac{v_{\text{avg}}}{|\vec{v}_{\text{avg}}|} = \frac{s / \Delta t}{|\Delta \vec{r}| / \Delta t} = \frac{s}{|\Delta \vec{r}|} = \frac{70.0\text{ m}}{50.0\text{ m}} = 1.40.

03

A particle oscillates along the xx-axis according to x(t)=4.00cos⁡(πt)x(t) = 4.00\cos(\pi t) (with xx in meters and tt in seconds). Over the interval from t=0.00 st = 0.00\text{ s} to t=1.50 st = 1.50\text{ s}, determine the net displacement Δx\Delta x, the total distance traveled ss, and compare ∣v⃗avg∣|\vec{v}_{\text{avg}}| with vavgv_{\text{avg}}.

Answer

At t=0t = 0, x(0)=4.00 mx(0) = 4.00\text{ m}. At t=1.00 st = 1.00\text{ s}, x(1)=−4.00 mx(1) = -4.00\text{ m} (turnaround point). At t=1.50 st = 1.50\text{ s}, x(1.5)=0.00 mx(1.5) = 0.00\text{ m}. Thus, Δx=0.00−4.00=−4.00 m\Delta x = 0.00 - 4.00 = -4.00\text{ m} (∣Δx∣=4.00 m|\Delta x| = 4.00\text{ m}). The distance is s=∣−4.00−4.00∣+∣0.00−(−4.00)∣=8.00 m+4.00 m=12.0 ms = | -4.00 - 4.00 | + | 0.00 - (-4.00) | = 8.00\text{ m} + 4.00\text{ m} = 12.0\text{ m}. Therefore, ∣v⃗avg∣=4.00 m1.50 s≈2.67 m/s|\vec{v}_{\text{avg}}| = \frac{4.00\text{ m}}{1.50\text{ s}} \approx 2.67\text{ m/s}, while vavg=12.0 m1.50 s=8.00 m/sv_{\text{avg}} = \frac{12.0\text{ m}}{1.50\text{ s}} = 8.00\text{ m/s} (a ratio of 3.003.00).

Loading workspace…