Resources

In a physics laboratory experiment, a low-friction dynamics cart equipped with an ultrasonic motion sensor moves along an inclined track. The sensor records a piecewise speed-time graph: the cart is launched up the incline with an initial speed of 1.80 m/s1.80\text{ m/s} at t=0 st = 0\text{ s}, slows down uniformly to 0 m/s0\text{ m/s} at the highest point at t=1.20 st = 1.20\text{ s}, remains instantaneously at rest, and immediately rolls back down, accelerating uniformly until its speed reaches 1.80 m/s1.80\text{ m/s} at t=2.40 st = 2.40\text{ s}. Using the speed-time graph, determine: (a) the magnitude of the cart's acceleration along the incline, and (b) the total round-trip distance traveled by the cart between t=0 st = 0\text{ s} and t=2.40 st = 2.40\text{ s}.

Answer and steps

Final answer

(a) 1.50 m/s21.50\text{ m/s}^2; (b) 2.16 m2.16\text{ m}

Steps

Part (a): Determining the Magnitude of Acceleration

  1. Relate acceleration to the speed-time graph:
    For motion in a straight line with uniform acceleration, the magnitude of acceleration aa corresponds to the absolute value of the slope of the line on a speed-time graph during each phase of motion: a=∣Δv∣Δta = \frac{|\Delta v|}{\Delta t}
  2. Calculate the slope for the upward motion (t=0 st = 0\text{ s} to t=1.20 st = 1.20\text{ s}):
    The cart's speed decreases from v0=1.80 m/sv_0 = 1.80\text{ m/s} to v1=0 m/sv_1 = 0\text{ m/s} in a time interval of Δt=1.20 s−0 s=1.20 s\Delta t = 1.20\text{ s} - 0\text{ s} = 1.20\text{ s}: a=∣0 m/s−1.80 m/s∣1.20 s=1.80 m/s1.20 s=1.50 m/s2a = \frac{|0\text{ m/s} - 1.80\text{ m/s}|}{1.20\text{ s}} = \frac{1.80\text{ m/s}}{1.20\text{ s}} = 1.50\text{ m/s}^2

    (Note: The downward phase from t=1.20 st = 1.20\text{ s} to t=2.40 st = 2.40\text{ s} yields the same magnitude: 1.80 m/s−0 m/s2.40 s−1.20 s=1.50 m/s2\frac{1.80\text{ m/s} - 0\text{ m/s}}{2.40\text{ s} - 1.20\text{ s}} = 1.50\text{ m/s}^2.)


Part (b): Determining the Total Distance Traveled

  1. Relate distance to the area under the speed-time curve:
    The total distance traveled dd is the total geometric area under the speed-time graph over the given time interval. Because speed is always non-negative, the areas of both segments add together to give the full round-trip distance.
  2. Calculate the distance traveled up the incline (dupd_{\text{up}}):
    The region between t=0 st = 0\text{ s} and t=1.20 st = 1.20\text{ s} forms a right-angled triangle with a base of 1.20 s1.20\text{ s} and a height of 1.80 m/s1.80\text{ m/s}: dup=12⋅base⋅height=12⋅(1.20 s)⋅(1.80 m/s)=1.08 md_{\text{up}} = \frac{1}{2} \cdot \text{base} \cdot \text{height} = \frac{1}{2} \cdot (1.20\text{ s}) \cdot (1.80\text{ m/s}) = 1.08\text{ m}
  3. Calculate the distance traveled down the incline (ddownd_{\text{down}}):
    The region between t=1.20 st = 1.20\text{ s} and t=2.40 st = 2.40\text{ s} forms an identical triangle: ddown=12⋅(2.40 s−1.20 s)⋅(1.80 m/s)=12⋅(1.20 s)⋅(1.80 m/s)=1.08 md_{\text{down}} = \frac{1}{2} \cdot (2.40\text{ s} - 1.20\text{ s}) \cdot (1.80\text{ m/s}) = \frac{1}{2} \cdot (1.20\text{ s}) \cdot (1.80\text{ m/s}) = 1.08\text{ m}
  4. Sum the two segments:
    dtotal=dup+ddown=1.08 m+1.08 m=2.16 md_{\text{total}} = d_{\text{up}} + d_{\text{down}} = 1.08\text{ m} + 1.08\text{ m} = 2.16\text{ m}

Common Pitfall: Do not confuse distance with displacement. While the total round-trip displacement is 0 m0\text{ m} (since the cart returns to its starting point), total distance is a scalar measure of the entire path traversed and is found by summing the areas under the speed-time graph.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the distance for only the upward motion and forgets to double it or account for the return trip.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a=ΔvΔt=1.801.20=1.50 m/s2  ⟹  a=1.50 m/s2a = \frac{\Delta v}{\Delta t} = \frac{1.80}{1.20} = 1.50\text{ m/s}^2 \implies a = 1.50\text{ m/s}^2

  2. Step 2

    d=12×1.80×1.20  ⟹  d=1.08 md = \frac{1}{2} \times 1.80 \times 1.20 \implies d = 1.08\text{ m}

    Correct

    dtotal=dup+ddown=12(1.20)(1.80)+12(1.20)(1.80)=1.08 m+1.08 m=2.16 md_{\text{total}} = d_{\text{up}} + d_{\text{down}} = \frac{1}{2}(1.20)(1.80) + \frac{1}{2}(1.20)(1.80) = 1.08\text{ m} + 1.08\text{ m} = 2.16\text{ m}

    Your calculation gives only the area under the curve from t=0 st = 0\text{ s} to t=1.20 st = 1.20\text{ s} (the upward motion). Because the question asks for the total round-trip distance between t=0 st = 0\text{ s} and t=2.40 st = 2.40\text{ s}, you need to add the area of the second triangle for the return trip.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the slope of a speed-time graph represents the magnitude of acceleration.

You correctly used the area of a triangle under the speed-time graph to compute distance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incomplete Interval Integration

You stopped calculating distance at t=1.20 st = 1.20\text{ s} instead of covering the full time interval up to t=2.40 st = 2.40\text{ s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the two-phase nature of a round trip by calculating the area under only the first segment of the piecewise speed-time graph.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify the Time Interval
  • Total distance traveled is the total area under the speed-time graph over the entire stated interval [t1,t2][t_1, t_2].

  • Check the given end time in the problem (t=2.40 st = 2.40\text{ s}) and confirm that your area calculation spans both the upward and downward legs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that the upward distance is dup=1.08 md_{\text{up}} = 1.08\text{ m}.

  2. Calculate the downward distance from t=1.20 st = 1.20\text{ s} to t=2.40 st = 2.40\text{ s}: ddown=12(2.40−1.20)(1.80)=1.08 md_{\text{down}} = \frac{1}{2}(2.40 - 1.20)(1.80) = 1.08\text{ m}.

  3. Sum the two segments for the full round trip: dtotal=1.08 m+1.08 m=2.16 md_{\text{total}} = 1.08\text{ m} + 1.08\text{ m} = 2.16\text{ m}.

Final answer

(a) 1.50 m/s21.50\text{ m/s}^2; (b) 2.16 m2.16\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Mark the entire requested time interval on the horizontal axis before calculating geometric areas.

  • Label each segment of a multi-phase trip (such as 'up' and 'down') separately so no phase is missed before writing your final sum.

OverviewACEpath Teacher's Diagnosis

02 The student divides the total change in speed from start to finish across the entire time interval, mistakenly getting an acceleration of 0.75 m/s².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a=1.802.40  ⟹  a=0.75 m/s2a = \frac{1.80}{2.40} \implies a = 0.75\text{ m/s}^2

    Correct

    a=∣Δv∣Δt=1.80 m/s−0 m/s1.20 s=1.50 m/s2a = \frac{|\Delta v|}{\Delta t} = \frac{1.80\text{ m/s} - 0\text{ m/s}}{1.20\text{ s}} = 1.50\text{ m/s}^2

    You calculated acceleration by dividing the initial speed of 1.80 m/s1.80\text{ m/s} by the total duration of 2.40 s2.40\text{ s}. However, the speed drops from 1.80 m/s1.80\text{ m/s} to 0 m/s0\text{ m/s} over Δt=1.20 s\Delta t = 1.20\text{ s}, giving an acceleration magnitude of 1.80 m/s1.20 s=1.50 m/s2\frac{1.80\text{ m/s}}{1.20\text{ s}} = 1.50\text{ m/s}^2.

  2. Step 2

    d=(12)×1.80×1.20+(12)×1.80×1.20  ⟹  d=1.08+1.08=2.16 md = \left(\frac{1}{2}\right) \times 1.80 \times 1.20 + \left(\frac{1}{2}\right) \times 1.80 \times 1.20 \implies d = 1.08 + 1.08 = 2.16\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the area under a speed-time graph represents distance traveled.

You successfully partitioned the motion into upward and downward segments of 1.20 s1.20\text{ s} each to compute the total distance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect time interval for piecewise acceleration

You accidentally substituted the total time of 2.40 s2.40\text{ s} instead of the single-leg duration of 1.20 s1.20\text{ s} when computing the slope.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total elapsed time of a multi-stage or turnaround motion with the time interval Δt\Delta t of a single uniform-acceleration segment on a speed-time graph.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Segment Boundaries
  • Acceleration is the slope of a specific linear segment on a speed-time or velocity-time graph.

  • Find the start and end coordinates (t1,v1)(t_1, v_1) and (t2,v2)(t_2, v_2) of one straight-line segment before calculating a=∣v2−v1∣t2−t1a = \frac{|v_2 - v_1|}{t_2 - t_1}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the time interval for the cart slowing down up the incline: t=0 st = 0\text{ s} to t=1.20 st = 1.20\text{ s}, so Δt=1.20 s\Delta t = 1.20\text{ s}.

  2. Calculate the slope magnitude: a=∣0 m/s−1.80 m/s∣1.20 s=1.80 m/s1.20 s=1.50 m/s2a = \frac{|0\text{ m/s} - 1.80\text{ m/s}|}{1.20\text{ s}} = \frac{1.80\text{ m/s}}{1.20\text{ s}} = 1.50\text{ m/s}^2.

Final answer

(a) 1.50 m/s21.50\text{ m/s}^2; (b) 2.16 m2.16\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Mark the vertex or turnaround point on the time axis whenever a graph has a 'V' shape or changes direction.

  • Verify that your Δt\Delta t corresponds strictly to the interval over which Δv\Delta v occurs.

OverviewACEpath Teacher's Diagnosis

03 The student confuses distance with displacement and treats the return trip as negative area, concluding the total distance is 0 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a=1.80−01.20  ⟹  a=1.50 m/s2a = \frac{1.80 - 0}{1.20} \implies a = 1.50\text{ m/s}^2

  2. Step 2

    d=(12)(1.20)(1.80)−(12)(1.20)(1.80)  ⟹  d=1.08−1.08=0 md = \left(\frac{1}{2}\right)(1.20)(1.80) - \left(\frac{1}{2}\right)(1.20)(1.80) \implies d = 1.08 - 1.08 = 0\text{ m}

    Correct

    d=dup+ddown=(12)(1.20)(1.80)+(12)(1.20)(1.80)=1.08 m+1.08 m=2.16 md = d_{\text{up}} + d_{\text{down}} = \left(\frac{1}{2}\right)(1.20)(1.80) + \left(\frac{1}{2}\right)(1.20)(1.80) = 1.08\text{ m} + 1.08\text{ m} = 2.16\text{ m}

    You correctly found the area of each triangular segment as 1.08 m1.08\text{ m}, but you subtracted the return trip instead of adding it. Total distance is a scalar representing total ground covered, so areas under a speed-time curve always add together.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the slope formula to find the acceleration magnitude as 1.50 m/s21.50\text{ m/s}^2.

You correctly applied the triangle area formula 12bh\frac{1}{2}bh to find the distance traveled in each leg of the motion (1.08 m1.08\text{ m}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distance vs. Displacement Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the second half of the journey as negative area, calculating the net displacement (0 m0\text{ m}) instead of the total scalar distance traveled (2.16 m2.16\text{ m}). On a speed-time graph, speed is strictly non-negative, and distance is always the sum of all areas under the curve.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distance vs. Displacement
  • Displacement is a vector and can be positive or negative (net position change), whereas distance is a scalar and is strictly non-negative (total path length).

  • Always add the absolute values of the areas for each segment when asked for total distance: dtotal=∑∣Area∣=∫∣v(t)∣ dtd_{\text{total}} = \sum |\text{Area}| = \int |v(t)|\,dt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the distance traveled up the incline: dup=12(1.20 s)(1.80 m/s)=1.08 md_{\text{up}} = \frac{1}{2}(1.20\text{ s})(1.80\text{ m/s}) = 1.08\text{ m}.

  2. Calculate the distance traveled down the incline: ddown=12(1.20 s)(1.80 m/s)=1.08 md_{\text{down}} = \frac{1}{2}(1.20\text{ s})(1.80\text{ m/s}) = 1.08\text{ m}.

  3. Sum both segments to find total distance: dtotal=dup+ddown=1.08 m+1.08 m=2.16 md_{\text{total}} = d_{\text{up}} + d_{\text{down}} = 1.08\text{ m} + 1.08\text{ m} = 2.16\text{ m}.

Final answer

(a) 1.50 m/s21.50\text{ m/s}^2; (b) 2.16 m2.16\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • When working with motion graphs, explicitly note whether the vertical axis represents speed or velocity before calculating areas.

  • Practice distinguishing between scalar quantities (speed, distance) and vector quantities (velocity, displacement) in multi-stage problems.

Lock it in

Similar question

01

A toy car travels along a track. Its speed-time graph shows speed decreasing linearly from 2.0 m/s2.0\text{ m/s} to 0 m/s0\text{ m/s} over 1.5 s1.5\text{ s}, then increasing linearly back to 2.0 m/s2.0\text{ m/s} over the next 1.5 s1.5\text{ s}. Find the total distance traveled over the entire 3.0 s3.0\text{ s}.

Answer

3.0 m3.0\text{ m}. The first triangular area is d1=12(1.5 s)(2.0 m/s)=1.5 md_1 = \frac{1}{2}(1.5\text{ s})(2.0\text{ m/s}) = 1.5\text{ m}, and the second triangular area is d2=12(1.5 s)(2.0 m/s)=1.5 md_2 = \frac{1}{2}(1.5\text{ s})(2.0\text{ m/s}) = 1.5\text{ m}. Total distance d=d1+d2=3.0 md = d_1 + d_2 = 3.0\text{ m}.

02

A runner accelerates from rest to 4.0 m/s4.0\text{ m/s} in 2.0 s2.0\text{ s}, maintains a constant speed of 4.0 m/s4.0\text{ m/s} for 3.0 s3.0\text{ s}, and then decelerates to rest in 1.0 s1.0\text{ s}. Using the speed-time graph, determine the total distance covered.

Answer

18.0 m18.0\text{ m}. The area is divided into three sections: acceleration triangle d1=12(2.0)(4.0)=4.0 md_1 = \frac{1}{2}(2.0)(4.0) = 4.0\text{ m}, constant-speed rectangle d2=(3.0)(4.0)=12.0 md_2 = (3.0)(4.0) = 12.0\text{ m}, and deceleration triangle d3=12(1.0)(4.0)=2.0 md_3 = \frac{1}{2}(1.0)(4.0) = 2.0\text{ m}. Total distance d=4.0+12.0+2.0=18.0 md = 4.0 + 12.0 + 2.0 = 18.0\text{ m}.

03

A ball is thrown straight up with an initial speed of 9.8 m/s9.8\text{ m/s}, reaches its peak at t=1.0 st = 1.0\text{ s}, and is caught at the same height at t=2.0 st = 2.0\text{ s} moving downward at 9.8 m/s9.8\text{ m/s}. Compare: (a) its total displacement over the 2.0 s2.0\text{ s}, and (b) its total distance traveled over the 2.0 s2.0\text{ s}.

Answer

(a) 0 m0\text{ m}; (b) 9.8 m9.8\text{ m}. Displacement is a vector and accounts for direction: Δx=(+4.9 m)+(−4.9 m)=0 m\Delta x = (+4.9\text{ m}) + (-4.9\text{ m}) = 0\text{ m}. Distance is a scalar obtained by summing the magnitudes of both paths: d=4.9 m+4.9 m=9.8 md = 4.9\text{ m} + 4.9\text{ m} = 9.8\text{ m}.

Loading workspace…