Resources

A 0.250 kg0.250\text{ kg} block is pressed against a horizontal spring (spring constant k=400 N/mk = 400\text{ N/m}), compressing it by 0.120 m0.120\text{ m} from its equilibrium length on a frictionless table. The block is released from rest, leaves the spring at equilibrium, and slides off the edge of the table, which is 1.10 m1.10\text{ m} above the floor. Take g=9.80 m/s2g = 9.80\text{ m/s}^2. Coupling elastic potential energy and projectile motion: (a) list the known quantities for both stages; (b) define the intermediate unknown variable bridging the two stages as well as the final unknown horizontal landing range; and (c) compute the final horizontal landing distance from the base of the table.

Answer and steps

Final answer

(a) Knowns: mass m=0.250 kgm = 0.250\text{ kg}, spring constant k=400 N/mk = 400\text{ N/m}, compression distance x=0.120 mx = 0.120\text{ m}, vertical launch height h=1.10 mh = 1.10\text{ m}, vertical acceleration ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2, initial vertical velocity v0y=0 m/sv_{0y} = 0\text{ m/s}; (b) Unknowns: horizontal launch speed v0xv_{0x} and horizontal range Δx\Delta x; (c) Intermediate v0x=4.80 m/sv_{0x} = 4.80\text{ m/s}, horizontal range Δx=2.27 m\Delta x = 2.27\text{ m}.

Steps

01

Intermediate Speed via Energy Conservation

Part (a): Identify Known Quantities

The scenario divides naturally into two physical stages: the horizontal release governed by conservation of mechanical energy, and the subsequent horizontal projectile motion under gravity.

  • Stage 1 (Spring Release):
    • Mass of the block: m=0.250 kgm = 0.250\text{ kg}
    • Spring stiffness constant: k=400 N/mk = 400\text{ N/m}
    • Initial spring compression: x=0.120 mx = 0.120\text{ m}
    • Initial velocity at maximum compression: vi=0 m/sv_i = 0\text{ m/s}
  • Stage 2 (Projectile Flight):
    • Table height (vertical displacement magnitude): h=1.10 mh = 1.10\text{ m} (or vertical displacement Δy=−1.10 m\Delta y = -1.10\text{ m})
    • Acceleration due to gravity: g=9.80 m/s2g = 9.80\text{ m/s}^2 (or ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2, ax=0 m/s2a_x = 0\text{ m/s}^2)
    • Initial vertical velocity: v0y=0 m/sv_{0y} = 0\text{ m/s}

Part (b): Identify Unknown Variables

  • Intermediate Bridge Variable:
    • Horizontal launch speed off the table: v0xv_{0x} (which equals the speed vv of the block when it detaches from the spring at its equilibrium position).
  • Final Target Variable:
    • Horizontal landing range from the base of the table: Δx\Delta x.

Part (c): Step-by-Step Calculation

Since the table is frictionless and the spring returns to its unstretched equilibrium position, all initial elastic potential energy converts into kinetic energy:

12kx2=12mv0x2\frac{1}{2}kx^2 = \frac{1}{2}mv_{0x}^2

Solving for the launch speed v0xv_{0x}:

v0x=xkm=0.120 m⋅400 N/m0.250 kg=0.120⋅1600=0.120⋅40=4.80 m/sv_{0x} = x\sqrt{\frac{k}{m}} = 0.120\text{ m} \cdot \sqrt{\frac{400\text{ N/m}}{0.250\text{ kg}}} = 0.120 \cdot \sqrt{1600} = 0.120 \cdot 40 = 4.80\text{ m/s}

02

Flight Time via Vertical Free Fall

The vertical motion is accelerated purely by gravity with zero initial vertical velocity (v0y=0 m/sv_{0y} = 0\text{ m/s}):

h=12gt2  ⟹  t=2hgh = \frac{1}{2}gt^2 \implies t = \sqrt{\frac{2h}{g}}

Substitute the known values:

t=2⋅1.10 m9.80 m/s2=2.209.80≈0.4738 st = \sqrt{\frac{2 \cdot 1.10\text{ m}}{9.80\text{ m/s}^2}} = \sqrt{\frac{2.20}{9.80}}\approx 0.4738\text{ s}

03

Horizontal Range

Because there is no horizontal acceleration during flight (ax=0a_x = 0), the horizontal distance Δx\Delta x is:

Δx=v0x⋅t=4.80 m/s⋅0.4738 s≈2.27 m\Delta x = v_{0x} \cdot t = 4.80\text{ m/s} \cdot 0.4738\text{ s} \approx 2.27\text{ m}

Pitfall to avoid: Do not confuse the horizontal spring compression distance x=0.120 mx = 0.120\text{ m} with the final projectile range Δx=2.27 m\Delta x = 2.27\text{ m}. Using distinct subscripting or symbols prevents substituting the wrong value into projectile kinematics.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the compression distance x when writing the elastic potential energy formula, leading to an incorrect launch velocity and landing distance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Stage 1: m=0.250 kgm = 0.250\text{ kg}, k=400 N/mk = 400\text{ N/m}, x=0.120 mx = 0.120\text{ m}   ⟹  \implies Stage 2: h=1.10 mh = 1.10\text{ m}, g=9.80 m/s2g = 9.80\text{ m/s}^2

  2. Step 2

    Bridging variable: launch velocity vv   ⟹  \implies Target variable: horizontal range RR

  3. Step 3

    12kx=12mv2  ⟹  v2=kxm=400×0.1200.250=192  ⟹  v=192≈13.86 m/s\frac{1}{2}kx = \frac{1}{2}mv^2 \implies v^2 = \frac{kx}{m} = \frac{400 \times 0.120}{0.250} = 192 \implies v = \sqrt{192} \approx 13.86\text{ m/s}

    Correct

    12kx2=12mv2  ⟹  v=xkm=0.1204000.250=4.80 m/s\frac{1}{2}kx^2 = \frac{1}{2}mv^2 \implies v = x\sqrt{\frac{k}{m}} = 0.120\sqrt{\frac{400}{0.250}} = 4.80\text{ m/s}

    You omitted the exponent in the elastic potential energy formula, writing 12kx\frac{1}{2}kx instead of Us=12kx2U_s = \frac{1}{2}kx^2. Because spring force is F=kxF = kx, integrating force over displacement gives work and potential energy proportional to x2x^2.

  4. Step 4

    t=2hg=2×1.109.80=0.474 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2 \times 1.10}{9.80}} = 0.474\text{ s}

  5. Step 5

    R=v×t=13.86×0.474≈6.57 mR = v \times t = 13.86 \times 0.474 \approx 6.57\text{ m}

    Correct

    R=v×t=4.80 m/s×0.4738 s≈2.27 mR = v \times t = 4.80\text{ m/s} \times 0.4738\text{ s} \approx 2.27\text{ m}

    Your horizontal range method was mathematically correct, but the numeric value was affected by the earlier velocity error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly decomposed a multi-stage physics scenario into energy conservation and projectile motion.

You accurately identified the bridging variable and target variable.

You correctly computed the vertical free-fall time using kinematics.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted exponent in elastic potential energy formula

You wrote the elastic potential energy as 12kx\frac{1}{2}kx rather than 12kx2\frac{1}{2}kx^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating Hooke's law for restoring force (F=kxF = kx) with the quadratic expression for stored elastic potential energy (Us=12kx2U_s = \frac{1}{2}kx^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Energy Dimensions
  • Energy has units of Joules (N⋅m=kg⋅m2/s2\text{N}\cdot\text{m} = \text{kg}\cdot\text{m}^2/\text{s}^2). Multiplying k (N/m)k\,(\text{N/m}) by x (m)x\,(\text{m}) produces units of Force (N\text{N}), not Energy.

  • Always verify that your potential energy formula contains x2x^2, giving [N/m]⋅[m2]=N⋅m[\text{N/m}] \cdot [\text{m}^2] = \text{N}\cdot\text{m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set elastic potential energy equal to kinetic energy: 12kx2=12mv2\frac{1}{2}kx^2 = \frac{1}{2}mv^2.

  2. Solve for launch speed: v=xkm=0.1204000.250=0.120×40=4.80 m/sv = x\sqrt{\frac{k}{m}} = 0.120\sqrt{\frac{400}{0.250}} = 0.120 \times 40 = 4.80\text{ m/s}.

  3. Multiply the correct horizontal speed by the flight time: R=v×t=4.80 m/s×0.4738 s≈2.27 mR = v \times t = 4.80\text{ m/s} \times 0.4738\text{ s} \approx 2.27\text{ m}.

Final answer

(a) Stage 1 knowns: m=0.250 kgm = 0.250\text{ kg}, k=400 N/mk = 400\text{ N/m}, x=0.120 mx = 0.120\text{ m}; Stage 2 knowns: h=1.10 mh = 1.10\text{ m}, g=9.80 m/s2g = 9.80\text{ m/s}^2. (b) Bridging variable: horizontal launch speed vv; target variable: horizontal range RR. (c) Launch speed v=4.80 m/sv = 4.80\text{ m/s}, horizontal range R≈2.27 mR \approx 2.27\text{ m}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform dimensional checks whenever writing energy terms to ensure displacements are squared when multiplied by stiffness constants.

  • Re-solve the final range calculation using the corrected launch speed v=4.80 m/sv = 4.80\text{ m/s}.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the factor of 2 in the projectile fall time formula, solving t = √(h/g) instead of t = √(2h/g).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Stage 1: m=0.250 kgm = 0.250\text{ kg}, k=400 N/mk = 400\text{ N/m}, x=0.120 mx = 0.120\text{ m}; Stage 2: h=1.10 mh = 1.10\text{ m}, g=9.80 m/s2g = 9.80\text{ m/s}^2

  2. Step 2

    Intermediate variable: horizontal launch speed vv; Final variable: horizontal distance RR

  3. Step 3

    (12)\left(\frac{1}{2}\right)kx^2 = (12)\left(\frac{1}{2}\right)mv^2   ⟹  \implies v = xkm\sqrt{\frac{k}{m}} = 0.120 ×\times 4000.250\sqrt{\frac{400}{0.250}} = 4.80 m/s\text{ m/s}

  4. Step 4

    t = hg\sqrt{\frac{h}{g}} = 1.109.80\sqrt{\frac{1.10}{9.80}} ≈\approx 0.335 s\text{ s}

    Correct

    t = 2hg\sqrt{\frac{2h}{g}} = 2(1.10)9.80\sqrt{\frac{2(1.10)}{9.80}} ≈\approx 0.474 s\text{ s}

    You solved for fall time using t=h/gt = \sqrt{h/g} instead of t=2h/gt = \sqrt{2h/g}. Because vertical displacement from rest satisfies h=12gt2h = \frac{1}{2}gt^2, multiplying both sides by 22 gives gt2=2hgt^2 = 2h, so t=2hgt = \sqrt{\frac{2h}{g}}.

  5. Step 5

    R = v ×\times t = 4.80 ×\times 0.335 ≈\approx 1.61 m\text{ m}

    Correct

    R = v ×\times t = 4.80 ×\times 0.4738 ≈\approx 2.27 m\text{ m}

    Your range formula R=v×tR = v \times t is conceptually correct, but substituting your underestimated time value produced an incorrect final distance.

WHAT YOU DID WELL
Compliments from Your Teacher

You systematically cataloged the known quantities for both physical stages.

You clearly identified the bridging variable and the target variable.

You correctly equated elastic potential energy to kinetic energy to solve for the launch speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Kinematic Factor

You dropped the factor of 22 when inverting h=12gt2h = \frac{1}{2}gt^2 to find time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the position equation for constant acceleration (h=12at2h = \frac{1}{2}at^2) requires clearing the fraction by multiplying by 22 before taking the square root: 2h=gt2  ⟹  t=2hg2h = gt^2 \implies t = \sqrt{\frac{2h}{g}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinematics Inversion
  • For free fall from rest through height hh, Δy=12gt2\Delta y = \frac{1}{2}gt^2, so t=2hgt = \sqrt{\frac{2h}{g}}.

  • Always write the full kinematic relation Δy=v0yt+12ayt2\Delta y = v_{0y}t + \frac{1}{2}a_y t^2 first before isolating tt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the vertical motion equation with v0y=0v_{0y} = 0: h=12gt2h = \frac{1}{2}gt^2

  2. Multiply by 22 and divide by gg: t=2hg=2(1.10 m)9.80 m/s2≈0.4738 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2(1.10\text{ m})}{9.80\text{ m/s}^2}} \approx 0.4738\text{ s}

  3. Multiply horizontal speed by flight time: R=vt=(4.80 m/s)(0.4738 s)≈2.27 mR = v t = (4.80\text{ m/s})(0.4738\text{ s}) \approx 2.27\text{ m}

Final answer

2.27 m\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review derivations of standard kinematic expressions to ensure numerical coefficients like 1/21/2 are not omitted during algebraic manipulation.

  • Practice checking intermediate units and orders of magnitude, such as verifying that an object takes about 0.45 s0.45\text{ s} to fall 1 m1\text{ m} on Earth.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by mass rather than dividing by mass when solving for launch velocity from energy conservation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Stage 1: m=0.250 kgm = 0.250\text{ kg}, k=400 N/mk = 400\text{ N/m}, x=0.120 mx = 0.120\text{ m}; Stage 2: h=1.10 mh = 1.10\text{ m}, g=9.80 m/s2g = 9.80\text{ m/s}^2

  2. Step 2

    Bridging variable: exit velocity vv; Target variable: landing range RR

  3. Step 3

    12kx2=12mv2  ⟹  v2=kx2m=400×0.1202×0.250=1.44  ⟹  v=1.44=1.20 m/s\frac{1}{2}kx^2 = \frac{1}{2}mv^2 \implies v^2 = kx^2m = 400 \times 0.120^2 \times 0.250 = 1.44 \implies v = \sqrt{1.44} = 1.20\text{ m/s}

    Correct

    12kx2=12mv2  ⟹  v2=kx2m=400×0.12020.250=23.04  ⟹  v=23.04=4.80 m/s\frac{1}{2}kx^2 = \frac{1}{2}mv^2 \implies v^2 = \frac{kx^2}{m} = \frac{400 \times 0.120^2}{0.250} = 23.04 \implies v = \sqrt{23.04} = 4.80\text{ m/s}

    When isolating v2v^2 from 12kx2=12mv2\frac{1}{2}kx^2 = \frac{1}{2}mv^2, you multiplied by mm instead of dividing both sides by mm.

  4. Step 4

    t=2hg=2×1.109.80≈0.474 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2 \times 1.10}{9.80}} \approx 0.474\text{ s}

  5. Step 5

    R=v×t=1.20×0.474≈0.569 mR = v \times t = 1.20 \times 0.474 \approx 0.569\text{ m}

    Correct

    R=v0x×t=4.80 m/s×0.4738 s≈2.27 mR = v_{0x} \times t = 4.80\text{ m/s} \times 0.4738\text{ s} \approx 2.27\text{ m}

    Your kinematic range formula R=vtR = v t is correct, but the numerical result is affected by the earlier calculation of vv.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly divided the problem into distinct physical stages and labeled all knowns.

You accurately identified the bridging variable connecting energy conservation to projectile kinematics.

You set up the vertical time-of-flight equation correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic isolation error in energy conservation

Multiplying by the mass factor mm instead of dividing by it when isolating the velocity variable.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the algebraic inverse operation: to isolate a variable multiplied by a coefficient (m⋅v2m \cdot v^2), both sides of the equation must be divided by that coefficient rather than multiplied.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Variables with Coefficients
  • If A=mBA = m B, then B=AmB = \frac{A}{m}, not A⋅mA \cdot m.

  • Check the operation applied to both sides before evaluating numerical products.

Dimensional Analysis Sanity Check
  • Velocity squared has units of m2/s2\text{m}^2/\text{s}^2, and km=N/mkg=1s2\frac{k}{m} = \frac{\text{N/m}}{\text{kg}} = \frac{1}{\text{s}^2}, so kx2m\frac{k x^2}{m} yields m2/s2\text{m}^2/\text{s}^2.

  • Verify units before taking a square root: kx2mk x^2 m yields kg2⋅m2/s2\text{kg}^2\cdot\text{m}^2/\text{s}^2, which does not equal velocity squared.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both sides of 12kx2=12mv2\frac{1}{2}kx^2 = \frac{1}{2}mv^2 by 12m\frac{1}{2}m to get v2=kx2mv^2 = \frac{kx^2}{m}.

  2. Substitute the given numbers: v2=400×(0.120)20.250=5.760.250=23.04 m2/s2v^2 = \frac{400 \times (0.120)^2}{0.250} = \frac{5.76}{0.250} = 23.04\text{ m}^2/\text{s}^2.

  3. Take the square root to find v=23.04=4.80 m/sv = \sqrt{23.04} = 4.80\text{ m/s}.

  4. Multiply this launch speed by your flight time t≈0.4738 st \approx 0.4738\text{ s}: R=4.80×0.4738≈2.27 mR = 4.80 \times 0.4738 \approx 2.27\text{ m}.

Final answer

Horizontal launch speed v0x=4.80 m/sv_{0x} = 4.80\text{ m/s}, horizontal landing range Δx=2.27 m\Delta x = 2.27\text{ m}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating squared terms in kinetic and potential energy formulas before plugging in numbers.

  • Use quick unit checks on your isolated algebraic formula before numerical evaluation.

Lock it in

Similar question

01

A 0.100 kg0.100\text{ kg} toy dart is loaded into a spring launcher by compressing a spring (k=250 N/mk = 250\text{ N/m}) by 0.080 m0.080\text{ m}. Assuming all elastic potential energy converts to kinetic energy horizontally, calculate the launch speed of the dart.

Answer

v=4.0 m/sv = 4.0\text{ m/s}. Conservation of energy gives 12kx2=12mv2  ⟹  v=xk/m=0.080250/0.100=0.080×50=4.0 m/s\frac{1}{2}kx^2 = \frac{1}{2}mv^2 \implies v = x\sqrt{k/m} = 0.080\sqrt{250/0.100} = 0.080 \times 50 = 4.0\text{ m/s}.

02

A small 0.50 kg0.50\text{ kg} cart is held against a spring with k=800 N/mk = 800\text{ N/m} compressed by 0.15 m0.15\text{ m} on a frictionless horizontal tabletop 1.25 m1.25\text{ m} high. When released, the cart launches horizontally off the table. Taking g=10.0 m/s2g = 10.0\text{ m/s}^2, find its horizontal landing distance from the edge of the table.

Answer

3.0 m3.0\text{ m}. Intermediate speed: 12kx2=12mv2  ⟹  v=0.15800/0.50=0.15×40=6.0 m/s\frac{1}{2}kx^2 = \frac{1}{2}mv^2 \implies v = 0.15\sqrt{800/0.50} = 0.15 \times 40 = 6.0\text{ m/s}. Flight time: t=2h/g=2(1.25)/10.0=0.25=0.50 st = \sqrt{2h/g} = \sqrt{2(1.25)/10.0} = \sqrt{0.25} = 0.50\text{ s}. Range: R=vt=6.0×0.50=3.0 mR = vt = 6.0 \times 0.50 = 3.0\text{ m}.

03

A spring launcher is compressed by distance xx and propels a ball to a landing range RR from a fixed table height. If the spring compression is doubled to 2x2x while all other parameters remain unchanged, by what factor does the landing range change?

Answer

The range doubles (factor of 22). Since v=xk/mv = x\sqrt{k/m}, horizontal speed is strictly linear with respect to spring compression xx. Because the table height is unchanged, the flight time tt is constant, so R=vt∝xR = vt \propto x.

Loading workspace…