Resources

A student investigating an electric DC motor claims: 'Since the motor operates on electrical energy to deliver mechanical output, attaching a larger external mechanical load to the motor shaft will force the motor to spin slower, which must reduce the electrical power consumed from the DC source.' Resolving the counter-intuitive interaction between rotation speed, back-EMF, and armature current for an ideal DC motor with constant supply voltage E\mathcal{E} and internal resistance RR, determine whether current and electrical power increase, decrease, or remain constant when an increased mechanical load slows the motor rotor.

Answer and steps

Final answer

Both the armature current and total electrical power drawn from the source increase when the motor slows down under increased mechanical load, because counter-electromotive force is directly proportional to rotational speed (Eback=kω\mathcal{E}_{\text{back}} = k\omega); thus, a decrease in speed ω\omega reduces Eback\mathcal{E}_{\text{back}}, drastically increasing armature current I=(E−Eback)/RI = (\mathcal{E} - \mathcal{E}_{\text{back}})/R and source power Pin=EIP_{\text{in}} = \mathcal{E} I.

Steps

01

Back-EMF and Rotational Speed

To evaluate how increasing the mechanical load affects the current and electrical power, we analyze the relationship between the motor's rotational speed, its counter-electromotive force (back-EMF), and Ohm's law applied to the armature circuit.

As the armature coil rotates inside the magnetic field, Faraday's law of induction dictates that a potential difference is induced across the winding. According to Lenz's law, this induced voltage opposes the applied terminal voltage E\mathcal{E} and is known as the counter-electromotive force or back-EMF (Eback\mathcal{E}_{\text{back}}).

The magnitude of the back-EMF is directly proportional to the rotor's angular velocity ω\omega: Eback=kω\mathcal{E}_{\text{back}} = k\omega where kk is a motor design constant depending on the magnetic field strength and the geometry of the coil.

02

Armature Current

Applying Kirchhoff's voltage law to the armature circuit with internal winding resistance RR: E−Eback=IR\mathcal{E} - \mathcal{E}_{\text{back}} = I R

Solving for the armature current II: I=E−EbackR=E−kωRI = \frac{\mathcal{E} - \mathcal{E}_{\text{back}}}{R} = \frac{\mathcal{E} - k\omega}{R}

When an increased external mechanical load is applied to the shaft:

  • The rotor slows down, causing ω\omega to decrease.
  • Because ω\omega decreases, the back-EMF Eback\mathcal{E}_{\text{back}} decreases.
  • The net voltage driving current through the winding, (E−Eback)(\mathcal{E} - \mathcal{E}_{\text{back}}), increases.
  • Consequently, the armature current II increases.
03

Electrical Power Drawn from the Source

The total electrical power PinP_{\text{in}} supplied by the constant DC voltage source is given by: Pin=EIP_{\text{in}} = \mathcal{E} I

Because the terminal voltage E\mathcal{E} is fixed and the armature current II increases, the electrical power drawn from the source increases.

Common Pitfall

A common intuitive misconception is assuming that a slower-spinning motor does "less work" per second and therefore draws less power. In reality, a DC motor relies on back-EMF to self-regulate current. When mechanical resistance slows the rotor, back-EMF drops, allowing far more current to flow. The extra electrical energy supplied goes into overcoming the heavier mechanical load and into higher resistive thermal losses (I2RI^2 R) within the winding. If a motor is mechanically stalled (ω=0\omega = 0), back-EMF drops to zero and I=E/RI = \mathcal{E}/R, causing maximum current draw and risk of overheating.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the back-EMF produced by the motor with the net voltage across the armature, concluding that a lower speed directly reduces the driving voltage and current.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Motor speed ω\omega decreases under larger load   ⟹  \implies Induced EMF Eb=k⋅ωE_b = k \cdot \omega decreases.

  2. Step 2

    Current drawn is I=EbR  ⟹  I = \frac{E_b}{R} \implies Since EbE_b decreases, current II decreases.

    Correct

    I=E−EbR  ⟹  I = \frac{\mathcal{E} - E_b}{R} \implies as EbE_b decreases, the net driving voltage (E−Eb)(\mathcal{E} - E_b) increases, so armature current II increases.

    You used the back-EMF alone in Ohm's law instead of applying Kirchhoff's loop rule. The back-EMF opposes the applied battery voltage E\mathcal{E}, so the net voltage driving current across the winding resistance RR is E−Eb\mathcal{E} - E_b. When EbE_b drops, the net voltage and armature current both increase.

  3. Step 3

    Power drawn is P=E⋅I  ⟹  P = \mathcal{E} \cdot I \implies Therefore, both current and electrical power decrease.

    Correct

    P=E⋅I  ⟹  P = \mathcal{E} \cdot I \implies because E\mathcal{E} is constant and II increases, total electrical power drawn from the source increases.

    Your formula for source electrical power is correct, but your conclusion was affected by the incorrect current trend from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that an increased mechanical load reduces the rotor's angular speed.

You correctly applied the relationship that back-EMF is directly proportional to rotational speed.

You used the correct relationship between terminal voltage, current, and electrical power drawn from the source.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted opposing voltage term in motor loop equation

You set the armature current to I=EbRI = \frac{E_b}{R} as if the induced back-EMF were driving the circuit alone.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated back-EMF as the net potential difference across the armature resistance instead of an opposing counter-voltage that acts against the external DC supply voltage according to Lenz's law.

REASONING PATH
Your ACEpath teacher’s suggested approach
Apply Kirchhoff's Voltage Law to the Armature Loop
  • For a DC motor, the source voltage E\mathcal{E} and induced back-EMF EbE_b oppose each other: E−Eb=IR\mathcal{E} - E_b = IR.

  • Always write the net voltage driving current through the internal resistance as Vnet=E−EbV_{\text{net}} = \mathcal{E} - E_b, never as EbE_b alone.

Evaluate Current Response to Rotor Loading
  • When mechanical load slows rotation (ω↓\omega \downarrow), back-EMF drops (Eb↓E_b \downarrow), which widens the net voltage gap (E−Eb↑)(\mathcal{E} - E_b \uparrow).

  • Deduce that slowing down a motor under load always increases armature current I=E−EbRI = \frac{\mathcal{E} - E_b}{R}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Kirchhoff's loop rule to the motor circuit: E−Eb=IR\mathcal{E} - E_b = I R.

  2. Solve for the armature current: I=E−EbR=E−kωRI = \frac{\mathcal{E} - E_b}{R} = \frac{\mathcal{E} - k\omega}{R}.

  3. Because ω\omega decreases under the heavier mechanical load, EbE_b decreases, making the net driving voltage (E−Eb)(\mathcal{E} - E_b) larger, which causes current II to increase.

  4. Calculate the electrical power drawn from the DC source: Pin=EIP_{\text{in}} = \mathcal{E} I. Because E\mathcal{E} is fixed and II increases, PinP_{\text{in}} increases.

Final answer

Both the armature current and the electrical power drawn from the DC source increase.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how Lenz's law dictates that back-EMF opposes the applied battery voltage in a running motor.

  • Practice setting up Kirchhoff's voltage loop for motors under stalled (ω=0\omega = 0), no-load (maximum ω\omega), and loaded conditions.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the DC motor behaves as a fixed resistive load whose effective resistance increases or whose current is directly proportional to rotational speed, concluding current and power decrease.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Larger load slows the motor rotation.

  2. Step 2

    Slower rotation means less charge passes through the coils per second. ⟹ Current II is proportional to rotation speed ω\omega, so II decreases.

    Correct

    Eback=kω  ⟹  I=E−EbackR=E−kωR\mathcal{E}_{\text{back}} = k\omega \implies I = \frac{\mathcal{E} - \mathcal{E}_{\text{back}}}{R} = \frac{\mathcal{E} - k\omega}{R}, so as ω\omega decreases, II increases.

    Current is not determined by the physical rotation speed of the wire carrying charge. Instead, current is driven by the net voltage across the coil resistance: I=(E−Eback)/RI = (\mathcal{E} - \mathcal{E}_{\text{back}})/R. Because back-EMF Eback=kω\mathcal{E}_{\text{back}} = k\omega drops when the motor slows down, the opposing voltage drops and armature current increases.

  3. Step 3

    Electrical power consumed is P=E⋅IP = \mathcal{E} \cdot I. ⟹ Since II decreases and E\mathcal{E} is constant, power decreases.

    Correct

    Pin=EIP_{\text{in}} = \mathcal{E} I; because E\mathcal{E} is constant and II increases, PinP_{\text{in}} increases.

    You correctly identified the input power formula P=EIP = \mathcal{E} I. However, because your conclusion that current decreases was incorrect, your deduction that power decreases is also reversed.

  4. Step 4

    Therefore, both current and electrical power decrease.

    Correct

    Both armature current and total electrical power drawn from the source increase.

    Because slower rotation reduces the opposing back-EMF, the motor draws more current, and the power drawn from the source increases.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that an increased mechanical load slows down the motor's rotational speed.

You correctly recalled the electrical power relationship P=EIP = \mathcal{E} I for a constant DC voltage source.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglect of back-EMF self-regulation in DC motors

You treated current as a mechanical conveyor of charge linked to rotation speed rather than using Kirchhoff's voltage law with induced counter-electromotive force.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked electromagnetic induction (Faraday's and Lenz's laws) in rotating armature coils. A spinning motor acts simultaneously as a generator producing a counter-electromotive force Eback=kω\mathcal{E}_{\text{back}} = k\omega that opposes the external voltage E\mathcal{E}. When the motor slows down, this opposing voltage decreases, allowing more current to flow through the armature windings.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for Back-EMF
  • An operating motor generates a counter-voltage proportional to its angular velocity: Eback=kω\mathcal{E}_{\text{back}} = k\omega.

  • Always write the net loop equation E−Eback=IR\mathcal{E} - \mathcal{E}_{\text{back}} = I R rather than assuming current is proportional to mechanical speed.

Trace the Feedback Loop
  • Load increases   ⟹  ω\implies \omega decreases   ⟹  Eback\implies \mathcal{E}_{\text{back}} decreases   ⟹  (E−Eback)\implies (\mathcal{E} - \mathcal{E}_{\text{back}}) increases   ⟹  I\implies I increases.

  • Check whether speed changes increase or decrease the opposing EMF before deciding the direction of current change.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the induced back-EMF as Eback=kω\mathcal{E}_{\text{back}} = k\omega. When the external load slows the rotor, ω\omega decreases, so Eback\mathcal{E}_{\text{back}} decreases.

  2. Apply Ohm's law to the armature circuit: I=E−EbackRI = \frac{\mathcal{E} - \mathcal{E}_{\text{back}}}{R}. Since E\mathcal{E} and RR are constant while Eback\mathcal{E}_{\text{back}} decreases, the net driving voltage (E−Eback)(\mathcal{E} - \mathcal{E}_{\text{back}}) increases, so II increases.

  3. Calculate total electrical power drawn from the source: Pin=EIP_{\text{in}} = \mathcal{E} I. Because E\mathcal{E} is fixed and II increases, PinP_{\text{in}} increases.

Final answer

Both the armature current and total electrical power increase.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how Faraday's law and Lenz's law produce back-EMF in a spinning armature.

  • Practice drawing the equivalent circuit of a DC motor (a DC voltage source E\mathcal{E}, internal resistance RR, and an opposing voltage source Eback\mathcal{E}_{\text{back}}).

  • Consider the extreme case of a stalled motor (ω=0\omega = 0) to verify that current reaches its maximum value.

OverviewACEpath Teacher's Diagnosis

03 The student treats mechanical power output and electrical power input as identical with constant efficiency, reasoning that slower speed reduces power output and thus input current.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Mechanical output power is Pout=τ⋅ωP_{\text{out}} = \tau \cdot \omega. As the rotor slows down, rotational speed ω\omega decreases.

  2. Step 2

    Assuming motor efficiency is constant, electrical power Pin=PoutηP_{\text{in}} = \frac{P_{\text{out}}}{\eta}, decreases.

    Correct

    Eback=kω  ⟹  I=E−EbackR\mathcal{E}_{\text{back}} = k\omega \implies I = \frac{\mathcal{E} - \mathcal{E}_{\text{back}}}{R}

    You assumed motor efficiency η\eta remains constant, but efficiency changes significantly under changing mechanical load. An electric motor circuit is self-regulated by back-EMF: Eback=kω\mathcal{E}_{\text{back}} = k\omega. When speed ω\omega decreases, back-EMF decreases, which increases the net potential difference (E−Eback)(\mathcal{E} - \mathcal{E}_{\text{back}}) across the winding and causes current II to increase.

  3. Step 3

    Since Pin=E⋅IP_{\text{in}} = \mathcal{E} \cdot I and E\mathcal{E} is constant, current I=PinEI = \frac{P_{\text{in}}}{\mathcal{E}}.

    Correct

    Pin=EIP_{\text{in}} = \mathcal{E} I

    You correctly stated the definition Pin=EIP_{\text{in}} = \mathcal{E} I, but because your evaluation of PinP_{\text{in}} relied on the constant-efficiency assumption from the previous step, your deduction about II was inverted.

  4. Step 4

    Therefore, both current and electrical power decrease.

    Correct

    Therefore, both current and electrical power increase.

    You reached the conclusion that both current and power decrease as a downstream result of ignoring the back-EMF mechanism.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that adding an external mechanical load reduces the angular speed ω\omega of the rotor.

You correctly related input electrical power, supply voltage, and current using Pin=EIP_{\text{in}} = \mathcal{E} I.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Assumed constant motor efficiency instead of circuit back-EMF regulation

You assumed efficiency η\eta is constant and used Pin=Pout/ηP_{\text{in}} = P_{\text{out}}/\eta to infer electrical behavior from mechanical speed alone.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the electrodynamic feedback mechanism of the DC motor. The rotor coils rotating in a magnetic field generate a back-EMF Eback=kω\mathcal{E}_{\text{back}} = k\omega that opposes terminal voltage. When the rotor is slowed down by a load, Eback\mathcal{E}_{\text{back}} drops, which increases the net driving voltage (E−Eback)(\mathcal{E} - \mathcal{E}_{\text{back}}) across the internal winding resistance RR, drawing a larger armature current II and higher electrical power Pin=EIP_{\text{in}} = \mathcal{E} I.

REASONING PATH
Your ACEpath teacher’s suggested approach
Back-EMF Dependence
  • Eback=kω\mathcal{E}_{\text{back}} = k\omega

  • Always link changes in motor rotational speed directly to counter-electromotive force before analyzing current.

Armature Circuit Law
  • I=E−EbackRI = \frac{\mathcal{E} - \mathcal{E}_{\text{back}}}{R}

  • Use Kirchhoff's voltage law on the armature circuit to determine how changes in back-EMF affect current.

Electrical Input Power
  • Pin=EIP_{\text{in}} = \mathcal{E} I

  • Compute electrical power from source voltage and current rather than assuming constant mechanical-to-electrical conversion efficiency.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express counter-electromotive force in terms of rotor speed: Eback=kω\mathcal{E}_{\text{back}} = k\omega. When the rotor slows down, ω\omega decreases, so Eback\mathcal{E}_{\text{back}} decreases.

  2. Apply Kirchhoff's loop rule to the armature: E−Eback=IR  ⟹  I=E−EbackR\mathcal{E} - \mathcal{E}_{\text{back}} = I R \implies I = \frac{\mathcal{E} - \mathcal{E}_{\text{back}}}{R}. Since Eback\mathcal{E}_{\text{back}} drops, the net voltage increases and current II increases.

  3. Calculate electrical input power: Pin=EIP_{\text{in}} = \mathcal{E} I. Because E\mathcal{E} is fixed and II increases, PinP_{\text{in}} increases.

Final answer

Both the armature current and total electrical power drawn from the source increase when the motor slows down under increased mechanical load.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how Faraday's law of induction produces a counter-electromotive force in a rotating armature.

  • Practice setting up the armature loop equation E−Eback=IR\mathcal{E} - \mathcal{E}_{\text{back}} = IR for different operating states (free spin, rated load, stalled).

  • Avoid treating motor efficiency η\eta as constant when operating conditions like speed and load torque vary.

Lock it in

Similar question

01

A DC motor has an internal resistance of 2.0 Ω2.0\,\Omega and is powered by a constant 24 V24\text{ V} battery. When spinning at normal operating speed, its back-EMF is 20 V20\text{ V}. Find the current drawn by the motor (a) at normal speed and (b) if a sudden mechanical jam stalls the rotor completely.

Answer

(a) 2.0 A2.0\text{ A}, (b) 12 A12\text{ A}. Key steps: I=E−EbackRI = \frac{\mathcal{E} - \mathcal{E}_{\text{back}}}{R}. At normal speed, I=24−202.0=2.0 AI = \frac{24 - 20}{2.0} = 2.0\text{ A}. When stalled, Eback=0\mathcal{E}_{\text{back}} = 0, so I=24−02.0=12 AI = \frac{24 - 0}{2.0} = 12\text{ A}.

02

An ideal DC motor with coil resistance R=1.5 ΩR = 1.5\,\Omega operates on a 60 V60\text{ V} supply. Under light load, the motor draws 4.0 A4.0\text{ A}. A heavier load is attached, causing the rotor speed to decrease by 25%25\%. Assuming back-EMF is strictly proportional to speed, calculate the new armature current and the new electrical power drawn from the supply.

Answer

New current: 13 A13\text{ A}; new power: 780 W780\text{ W}. Key steps: Initial back-EMF is Eback1=E−I1R=60−(4.0)(1.5)=54 V\mathcal{E}_{\text{back1}} = \mathcal{E} - I_1 R = 60 - (4.0)(1.5) = 54\text{ V}. A 25%25\% drop in speed gives Eback2=0.75×54 V=40.5 V\mathcal{E}_{\text{back2}} = 0.75 \times 54\text{ V} = 40.5\text{ V}. New current I2=60−40.51.5=13 AI_2 = \frac{60 - 40.5}{1.5} = 13\text{ A}. New electrical power P2=EI2=60×13=780 WP_2 = \mathcal{E} I_2 = 60 \times 13 = 780\text{ W} (compared to 240 W240\text{ W} initially).

03

The total electrical power supplied to a DC motor is Pin=EIP_{\text{in}} = \mathcal{E} I. Show algebraically that this power splits into internal thermal dissipation and mechanical output power. Using this result, explain why a motor running at near-zero speed under extreme load has very low efficiency despite drawing peak electrical power.

Answer

Multiplying the loop equation E=Eback+IR\mathcal{E} = \mathcal{E}_{\text{back}} + IR by II yields EI=EbackI+I2R\mathcal{E}I = \mathcal{E}_{\text{back}}I + I^2R, where Pmech=EbackIP_{\text{mech}} = \mathcal{E}_{\text{back}}I is mechanical power and I2RI^2R is ohmic loss. When ω→0\omega \to 0, Eback→0\mathcal{E}_{\text{back}} \to 0, so Pmech→0P_{\text{mech}} \to 0 while I=E/RI = \mathcal{E}/R reaches a maximum; thus virtually all peak electrical power is wasted as internal heat (I2RI^2R), giving near-zero efficiency.

Loading workspace…