Resources

A hydrophone positioned on the seabed detects a harmonic acoustic signal generated by an underwater seismic source. The wave has an observed wavelength of λ=5.80 m\lambda = 5.80\text{ m} and an oscillation period of T0=3.90×10−3 sT_0 = 3.90\times 10^{-3}\text{ s}. Assuming the bulk modulus of the seawater is B=2.34×109 PaB = 2.34\times 10^9\text{ Pa}, backward-calculate: (a) the speed of sound propagation vv in this seawater layer, and (b) the equilibrium mass density ρ\rho of the seawater.

Answer and steps

Final answer

(a) v=1.49×103 m/sv = 1.49\times 10^3\text{ m/s} (or 1487 m/s1487\text{ m/s}); (b) ρ=1.06×103 kg/m3\rho = 1.06\times 10^3\text{ kg/m}^3.

Steps

Part (a): Determine the Speed of Sound Propagation

A harmonic wave travels a distance of one wavelength λ\lambda during each oscillation period T0T_0. The fundamental kinematic relation connecting wave speed vv, wavelength λ\lambda, and period T0T_0 is:

v=λT0v = \frac{\lambda}{T_0}

Substitute the given values into the equation:

v=5.80 m3.90×10−3 s≈1487.18 m/sv = \frac{5.80\text{ m}}{3.90 \times 10^{-3}\text{ s}} \approx 1487.18\text{ m/s}

Rounded to three significant figures, the speed of sound propagation in this seawater layer is:

v≈1.49×103 m/s(or 1487 m/s)v \approx 1.49 \times 10^3\text{ m/s} \quad (\text{or } 1487\text{ m/s})


Part (b): Determine the Equilibrium Mass Density of Seawater

In a fluid medium, sound propagates as a longitudinal mechanical wave consisting of alternating compressions and rarefactions. The speed of a longitudinal wave is governed by the elastic property of the medium (bulk modulus BB) and its inertial property (equilibrium density ρ\rho):

v=Bρv = \sqrt{\frac{B}{\rho}}

To find the equilibrium density ρ\rho, square both sides of the equation and solve for ρ\rho:

v2=Bρ  ⟹  ρ=Bv2v^2 = \frac{B}{\rho} \implies \rho = \frac{B}{v^2}

Substitute the bulk modulus B=2.34×109 PaB = 2.34 \times 10^9\text{ Pa} and the unrounded propagation speed v≈1487.18 m/sv \approx 1487.18\text{ m/s}:

ρ=2.34×109 Pa(1487.18 m/s)2=2.34×1092.2117×106≈1058 kg/m3\rho = \frac{2.34 \times 10^9\text{ Pa}}{(1487.18\text{ m/s})^2} = \frac{2.34 \times 10^9}{2.2117 \times 10^6} \approx 1058\text{ kg/m}^3

Rounded to three significant figures:

ρ≈1.06×103 kg/m3\rho \approx 1.06 \times 10^3\text{ kg/m}^3

Pitfall to Avoid: Always keep intermediate precision when calculating ρ\rho using vv. Rounding vv prematurely to 1.5×103 m/s1.5 \times 10^3\text{ m/s} would yield ρ≈1.04×103 kg/m3\rho \approx 1.04 \times 10^3\text{ kg/m}^3, introducing an avoidable rounding error.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the velocity when rearranging the wave speed formula v = √(B / ρ), solving for density as ρ = B / v instead of ρ = B / v².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=λT0  ⟹  v=5.803.90×10−3v = \frac{\lambda}{T_0} \implies v = \frac{5.80}{3.90 \times 10^{-3}}

  2. Step 2

    v=1487 m/sv = 1487\text{ m/s}

  3. Step 3

    v=Bρ  ⟹  ρ=Bvv = \sqrt{\frac{B}{\rho}} \implies \rho = \frac{B}{v}

    Correct

    v=Bρ  ⟹  v2=Bρ  ⟹  ρ=Bv2v = \sqrt{\frac{B}{\rho}} \implies v^2 = \frac{B}{\rho} \implies \rho = \frac{B}{v^2}

    When eliminating the square root, you must square both sides of the equation. Squaring v=Bρv = \sqrt{\frac{B}{\rho}} gives v2=Bρv^2 = \frac{B}{\rho}, so ρ=Bv2\rho = \frac{B}{v^2}.

  4. Step 4

    ρ=2.34×1091487  ⟹  ρ=1.57×106 kg/m3\rho = \frac{2.34 \times 10^9}{1487} \implies \rho = 1.57 \times 10^6\text{ kg/m}^3

    Correct

    ρ=2.34×109 Pa(1487.18 m/s)2≈1.06×103 kg/m3\rho = \frac{2.34 \times 10^9\text{ Pa}}{(1487.18\text{ m/s})^2} \approx 1.06 \times 10^3\text{ kg/m}^3

    Because of the missing square on vv in your rearrangement, the calculated density is orders of magnitude too large.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the relationship v=λT0v = \frac{\lambda}{T_0} to determine the speed of sound in part (a).

You identified the correct physical formula v=Bρv = \sqrt{\frac{B}{\rho}} relating wave speed, bulk modulus, and mass density.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
radical rearrangement error

You dropped the square power on vv when solving v=Bρv = \sqrt{\frac{B}{\rho}} for ρ\rho.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You removed the radical sign without applying the inverse operation (squaring) to the other side of the equation, leading to ρ=Bv\rho = \frac{B}{v} instead of ρ=Bv2\rho = \frac{B}{v^2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate Variables under Radicals
  • To eliminate a square root on one side of an equation, you must square the entire opposite side: X=Y  ⟹  X=Y2\sqrt{X} = Y \implies X = Y^2.

  • Write out the intermediate squared line v2=Bρv^2 = \frac{B}{\rho} explicitly before cross-multiplying or solving for ρ\rho.

Order of Magnitude Sanity Check
  • Typical liquid densities are on the order of 103 kg/m310^3\text{ kg/m}^3; a density of 106 kg/m310^6\text{ kg/m}^3 is physically unreasonable for water.

  • Check whether your calculated density matches realistic fluid densities to catch missing exponents immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Square both sides of the wave speed relation: v2=Bρv^2 = \frac{B}{\rho}.

  2. Multiply both sides by ρ\rho and divide by v2v^2: ρ=Bv2\rho = \frac{B}{v^2}.

  3. Substitute B=2.34×109 PaB = 2.34 \times 10^9\text{ Pa} and v≈1487.18 m/sv \approx 1487.18\text{ m/s}: ρ=2.34×109(1487.18)2≈1.06×103 kg/m3\rho = \frac{2.34 \times 10^9}{(1487.18)^2} \approx 1.06 \times 10^3\text{ kg/m}^3.

Final answer

(a) v=1.49×103 m/sv = 1.49 \times 10^3\text{ m/s} (or 1487 m/s1487\text{ m/s}); (b) ρ=1.06×103 kg/m3\rho = 1.06 \times 10^3\text{ kg/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice rearranging equations containing square roots by writing out the squaring step explicitly.

  • Perform dimensional or order-of-magnitude checks on final values to ensure physical realism.

OverviewACEpath Teacher's Diagnosis

02 The student confuses wave period with frequency and multiplies wavelength by period (v = λ · T₀) instead of dividing.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=λ⋅T0  ⟹  v=5.80⋅(3.90×10−3)  ⟹  v=0.0226 m/sv = \lambda \cdot T_0 \implies v = 5.80 \cdot (3.90 \times 10^{-3}) \implies v = 0.0226\text{ m/s}

    Correct

    v=λT0=5.80 m3.90×10−3 s≈1.49×103 m/sv = \frac{\lambda}{T_0} = \frac{5.80\text{ m}}{3.90 \times 10^{-3}\text{ s}} \approx 1.49 \times 10^3\text{ m/s}

    You multiplied the wavelength λ\lambda by the period T0T_0. Because wave speed is distance divided by time, the relationship is v=λT0=λfv = \frac{\lambda}{T_0} = \lambda f.

  2. Step 2

    v=Bρ  ⟹  ρ=Bv2v = \sqrt{\frac{B}{\rho}} \implies \rho = \frac{B}{v^2}

  3. Step 3

    ρ=2.34×109(0.0226)2  ⟹  ρ=4.58×1012 kg/m3\rho = \frac{2.34 \times 10^9}{(0.0226)^2} \implies \rho = 4.58 \times 10^{12}\text{ kg/m}^3

    Correct

    ρ=2.34×109 Pa(1487.18 m/s)2≈1.06×103 kg/m3\rho = \frac{2.34 \times 10^9\text{ Pa}}{(1487.18\text{ m/s})^2} \approx 1.06 \times 10^3\text{ kg/m}^3

    You executed the arithmetic consistently with your earlier speed value, but the calculation inherits the error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that sound wave speed in a fluid depends on bulk modulus and mass density via v=Bρv = \sqrt{\frac{B}{\rho}}.

You correctly solved the equation algebraically for ρ\rho to get ρ=Bv2\rho = \frac{B}{v^2}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between period and frequency

You substituted period T0T_0 into the formula position of frequency ff, multiplying λT0\lambda T_0 rather than dividing λT0\frac{\lambda}{T_0}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the time period of oscillation T0T_0 (measured in seconds) with frequency f=1T0f = \frac{1}{T_0} (measured in s−1\text{s}^{-1} or Hz\text{Hz}) leads to treating v=λfv = \lambda f as v=λT0v = \lambda T_0. A quick dimensional check ([m]⋅[s]=m⋅s≠m/s[\text{m}] \cdot [\text{s}] = \text{m}\cdot\text{s} \neq \text{m/s}) immediately exposes this mismatch.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional consistency check
  • Speed must have dimensions of lengthtime\frac{\text{length}}{\text{time}} (m/s\text{m/s}).

  • Always verify that λT0=ms=m/s\frac{\lambda}{T_0} = \frac{\text{m}}{\text{s}} = \text{m/s}, whereas λ⋅T0=m⋅s\lambda \cdot T_0 = \text{m}\cdot\text{s}.

Physical reasonableness check
  • Sound propagation in water is typically on the order of 1500 m/s1500\text{ m/s}, and water density is on the order of 1000 kg/m31000\text{ kg/m}^3.

  • Check whether intermediate and final numerical values match real physical orders of magnitude.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the wave propagation speed: v=λT0=5.80 m3.90×10−3 s≈1487.18 m/s≈1.49×103 m/sv = \frac{\lambda}{T_0} = \frac{5.80\text{ m}}{3.90 \times 10^{-3}\text{ s}} \approx 1487.18\text{ m/s} \approx 1.49 \times 10^3\text{ m/s}.

  2. Substitute the accurate unrounded speed into your density equation: ρ=Bv2=2.34×109 Pa(1487.18 m/s)2≈1058 kg/m3\rho = \frac{B}{v^2} = \frac{2.34 \times 10^9\text{ Pa}}{(1487.18\text{ m/s})^2} \approx 1058\text{ kg/m}^3.

Final answer

(a) v≈1.49×103 m/sv \approx 1.49 \times 10^3\text{ m/s}; (b) ρ≈1.06×103 kg/m3\rho \approx 1.06 \times 10^3\text{ kg/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing period TT from frequency ff by writing units next to each symbol during setup.

  • Always perform a unit check on derived formulas before substituting numbers.

  • Compare final answers to everyday baseline scales (such as liquid water density ≈103 kg/m3\approx 10^3\text{ kg/m}^3).

OverviewACEpath Teacher's Diagnosis

03 The student inverts the relationship between wave speed, bulk modulus, and density, writing v = √(ρ / B) and concluding ρ = B · v².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=λT0  ⟹  v=5.803.90×10−3  ⟹  v=1487 m/sv = \frac{\lambda}{T_0} \implies v = \frac{5.80}{3.90 \times 10^{-3}} \implies v = 1487\text{ m/s}

  2. Step 2

    v=ρB  ⟹  ρ=B⋅v2v = \sqrt{\frac{\rho}{B}} \implies \rho = B \cdot v^2

    Correct

    v=Bρ  ⟹  ρ=Bv2v = \sqrt{\frac{B}{\rho}} \implies \rho = \frac{B}{v^2}

    You inverted the fraction inside the square root. The speed of a mechanical wave is the square root of an elastic property divided by an inertial property: v=Bρv = \sqrt{\frac{B}{\rho}}, so ρ=Bv2\rho = \frac{B}{v^2}.

  3. Step 3

    ρ=(2.34×109)⋅(1487)2  ⟹  ρ=5.17×1015 kg/m3\rho = (2.34 \times 10^9) \cdot (1487)^2 \implies \rho = 5.17 \times 10^{15}\text{ kg/m}^3

    Correct

    ρ=2.34×109 Pa(1487 m/s)2≈1.06×103 kg/m3\rho = \frac{2.34 \times 10^9\text{ Pa}}{(1487\text{ m/s})^2} \approx 1.06 \times 10^3\text{ kg/m}^3

    Your arithmetic followed directly from your inverted formula, but it produced an impossible mass density on the order of 1015 kg/m310^{15}\text{ kg/m}^3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the kinematic wave relation v=λT0v = \frac{\lambda}{T_0} to determine the propagation speed.

You carried forward your calculated wave speed and correctly rearranged your written formula algebraically.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Wave Speed Formula

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the elastic term (bulk modulus BB) and the inertial term (density ρ\rho) in the Newton-Laplace wave speed formula, remembering v=ρ/Bv = \sqrt{\rho / B} instead of v=B/ρv = \sqrt{B / \rho}.

REASONING PATH
Your ACEpath teacher’s suggested approach
General Wave Speed Structure
  • v=Elastic PropertyInertial Propertyv = \sqrt{\frac{\text{Elastic Property}}{\text{Inertial Property}}}

  • Check that stiffness or elasticity (BB or EE) is in the numerator, while mass density ρ\rho or linear density μ\mu is in the denominator.

Physical Reality Check
  • Liquid water has a mass density close to 1000 kg/m31000\text{ kg/m}^3.

  • Always evaluate whether your final numerical order of magnitude makes physical sense; a density of 1015 kg/m310^{15}\text{ kg/m}^3 indicates an inverted ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard fluid sound speed formula: v=Bρv = \sqrt{\frac{B}{\rho}}.

  2. Square both sides to solve for density: v2=Bρ  ⟹  ρ=Bv2v^2 = \frac{B}{\rho} \implies \rho = \frac{B}{v^2}.

  3. Substitute B=2.34×109 PaB = 2.34 \times 10^9\text{ Pa} and v≈1487.18 m/sv \approx 1487.18\text{ m/s}: ρ=2.34×109(1487.18)2≈1058 kg/m3\rho = \frac{2.34 \times 10^9}{(1487.18)^2} \approx 1058\text{ kg/m}^3.

Final answer

ρ≈1.06×103 kg/m3\rho \approx 1.06 \times 10^3\text{ kg/m}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mechanical wave speed pattern: waves travel faster in stiffer media (higher BB) and slower in heavier media (higher ρ\rho).

  • Perform a quick dimensional analysis or physical sanity check on calculated densities to catch inverted powers of ten immediately.

Lock it in

Similar question

01

A sound wave propagates through fresh water at a speed of v=1480 m/sv = 1480\text{ m/s}. If the bulk modulus of the water is B=2.19×109 PaB = 2.19 \times 10^9\text{ Pa}, calculate the mass density ρ\rho of the water.

Answer

Using v=B/ρv = \sqrt{B/\rho}, square both sides: ρ=Bv2=2.19×109 Pa(1480 m/s)2≈1.00×103 kg/m3\rho = \frac{B}{v^2} = \frac{2.19 \times 10^9\text{ Pa}}{(1480\text{ m/s})^2} \approx 1.00 \times 10^3\text{ kg/m}^3.

02

In a liquid column, an ultrasound pulse has a frequency of f=2.50 MHzf = 2.50\text{ MHz} and a wavelength of λ=0.600 mm\lambda = 0.600\text{ mm}. If the measured density of the liquid is ρ=920 kg/m3\rho = 920\text{ kg/m}^3, determine its bulk modulus BB.

Answer

First find the wave speed: v=fλ=(2.50×106 s−1)(6.00×10−4 m)=1500 m/sv = f\lambda = (2.50 \times 10^6\text{ s}^{-1})(6.00 \times 10^{-4}\text{ m}) = 1500\text{ m/s}. Then use v=B/ρ  ⟹  B=ρv2=(920 kg/m3)(1500 m/s)2=2.07×109 Pav = \sqrt{B/\rho} \implies B = \rho v^2 = (920\text{ kg/m}^3)(1500\text{ m/s})^2 = 2.07 \times 10^9\text{ Pa}.

03

Two immiscible fluid layers have the same bulk modulus BB, but the sound speed in Layer 1 is 1.251.25 times the sound speed in Layer 2 (v1=1.25v2v_1 = 1.25 v_2). Find the ratio of their densities, ρ1ρ2\frac{\rho_1}{\rho_2}.

Answer

Since ρ=Bv2\rho = \frac{B}{v^2}, the density is inversely proportional to v2v^2: ρ1ρ2=B/v12B/v22=(v2v1)2=(11.25)2=11.5625=0.640\frac{\rho_1}{\rho_2} = \frac{B/v_1^2}{B/v_2^2} = \left(\frac{v_2}{v_1}\right)^2 = \left(\frac{1}{1.25}\right)^2 = \frac{1}{1.5625} = 0.640.

Loading workspace…