Resources
A meteorological drone hovering at a fixed altitude of above sea level releases a vertical probe with an initial downward speed of . As the probe descends under local gravity (, ignoring air drag), it must transmit a calibration ping after traveling a downward distance of . Expressing all non-standard initial quantities in standard SI units before applying kinematic relationships, calculate: (a) the elapsed time required to reach the ping altitude, and (b) the probe's instantaneous speed at the moment the ping is transmitted.
Answer and steps
Final answer
(a) ; (b)
Steps
Convert Given Quantities to Standard SI Units
The drone hovers at a fixed altitude, and the probe is launched vertically downward. Choosing the downward direction as positive:
- Initial downward velocity:
- Downward displacement to the ping altitude:
- Downward gravitational acceleration:
(a) Determine the Elapsed Time
Using the kinematic equation for displacement under constant acceleration:
Substitute the known values into the equation:
Solve this quadratic equation for using the quadratic formula :
Evaluating to three significant figures:
(A negative root also exists mathematically, but elapsed time must be positive, so it is discarded).
(b) Determine the Instantaneous Speed
With the elapsed time , the final downward velocity is obtained from:
Substitute the known parameters:
Alternative verification: Using Torricelli's equation , both methods confirm the speed to within rounding precision.
Typical errors
01 The student forgets to convert the initial velocity from km/h to m/s, directly substituting 54.0 into standard SI kinematic formulas.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly chose the constant-acceleration displacement equation, but you plugged in directly alongside and without converting speed into standard SI units ().
- Step 2Correct
Your application of the quadratic formula and your arithmetic evaluation were completely sound, but the numerical result was skewed by using instead of .
- Step 3Correct
You correctly selected Torricelli's equation to find the final speed, but re-substituting propagated the unit mismatch into your final velocity.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the standard kinematic equations for one-dimensional vertical motion under constant gravity.
You solved the resulting quadratic equation using the quadratic formula with accurate algebraic manipulation and arithmetic.
You chose an efficient formula () to determine the final instantaneous speed directly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the numerical value directly into equations containing parameters expressed in meters and seconds without first converting to .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to systematically perform dimensional analysis and convert all given quantities to base SI units prior to setting up kinematic formulas.
REASONING PATH
Your ACEpath teacher’s suggested approach- Base SI Unit Verification
In standard kinematic formulas, distance must be in meters (), time in seconds (), and speed in meters per second ().
Always list given quantities with explicit units and convert to by dividing by before writing your kinematic equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert initial velocity to SI units: .
Set up the displacement equation: .
Solve for the positive time root: .
Calculate the final speed: (or ).
(a) ; (b)
02 The student treats the release as starting from rest with zero initial downward speed, omitting the initial velocity term.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You assumed the probe was dropped from rest with an initial velocity of zero. Because the probe was released with an initial downward speed of , you must include the initial velocity term in the displacement equation.
- Step 2Correct
Your arithmetic evaluation of was accurate, but the resulting time of is incorrect because it was derived from an equation missing the initial velocity term.
- Step 3Correct
You used Torricelli's equation for an object released from rest (). With an initial downward speed , the kinematic relation must include the initial velocity squared: .
- Step 4Correct
You evaluated correctly, but the numerical result is lower than the actual speed because was omitted.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified downward vertical motion under constant gravitational acceleration .
You accurately substituted the displacement and gravitational acceleration into your chosen kinematic relationships.
You executed all intermediate arithmetic and square-root operations with high precision.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the word "releases" as synonymous with "dropped from rest," thereby setting despite the problem explicitly specifying .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing general vertical projectile motion (with non-zero initial speed) with simple free fall from rest, leading to the selection of specialized formulas and rather than the complete kinematic equations containing initial velocity terms.
REASONING PATH
Your ACEpath teacher’s suggested approach- Inventory Initial Conditions and Units
Every kinematic equation for constant acceleration requires explicit checking of . Never assume unless the problem explicitly states an object is "dropped from rest" or "released gently."
List all given quantities and convert them to base SI units first: .
- Use Complete Kinematic Equations
For vertical motion with non-zero initial velocity, use and .
Substitute into the quadratic equation to solve for .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert initial downward speed: .
Set up the displacement equation: .
Apply the quadratic formula: .
Find final speed: (or ).
(a) ; (b)
03 The student treats the motion as non-accelerated constant velocity using Δt = Δz / u₀, ignoring gravitational acceleration during the descent.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You applied the uniform speed formula , but the falling probe accelerates downward due to gravity (). You need to solve the quadratic kinematic displacement equation instead.
- Step 3Correct
Because you assumed the probe fell at a constant speed, you concluded that the final speed remained equal to the initial speed. With gravity acting on the probe, its downward speed continuously increases.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the non-standard initial speed into meters per second using the proper conversion factor.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected the constant-velocity formula instead of the accelerated kinematic equations, overlooking the continuous downward acceleration caused by gravity.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check for External Forces / Acceleration
An object moving freely near Earth's surface accelerates downward at unless another force balances gravity.
Always identify the acceleration before choosing kinematic formulas; if , use constant-acceleration formulas rather than constant-velocity relations.
- Selecting Accelerated Motion Equations
For constant acceleration: and .
Set up the quadratic equation in and solve for the positive root when finding descent time.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the vertical displacement equation under downward gravitational acceleration: .
Substitute the known values: , which rearranges to .
Apply the quadratic formula to find the positive root: .
Calculate the instantaneous final speed: (or use ).
(a) ; (b)
Lock it in
How do you convert a speed given in kilometers per hour () into meters per second ()?
Divide by (since ).
Similar question
A ball is thrown vertically downward from a cliff with an initial speed of . Neglecting air resistance and taking , what is its speed after falling a distance of ?
Answer
. First convert initial velocity: . Use , giving .
A skydiver releases a flare downward from a helicopter with an initial speed of . How long does it take for the flare to descend under gravity (, ignore drag)?
Answer
. Convert . Set up . Solving via the quadratic formula gives .
A test capsule is propelled vertically downward into an atmospheric test chamber at an initial speed of over an acceleration zone of depth where effective downward acceleration is . Calculate: (a) the time taken to traverse this depth, and (b) the capsule's final speed.
Answer
(a) ; (b) . Convert . Using , we find . Then from , .