Resources

An open U-tube manometer with uniform cross-sectional area contains liquid mercury (ρHg=1.36×104 kg/m3\rho_{\text{Hg}} = 1.36 \times 10^4\text{ kg/m}^3) in equilibrium. In the left arm, a column of oil of height hoil=0.240 mh_{\text{oil}} = 0.240\text{ m} and density ρoil=8.50×102 kg/m3\rho_{\text{oil}} = 8.50 \times 10^2\text{ kg/m}^3 is poured on top of the mercury. In the right arm, water of density ρw=1.00×103 kg/m3\rho_{\text{w}} = 1.00 \times 10^3\text{ kg/m}^3 is added until the top surface of the water column is at the exact same horizontal elevation as the top surface of the oil column. Coupling hydrostatic pressure balance at the lowest common mercury interface with geometric column alignment, find the height of the water column hwh_{\text{w}} in meters. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

hw=0.243 mh_{\text{w}} = 0.243\text{ m}

Steps

01

Geometric relationship of the liquid columns

To find the height of the water column hwh_{\text{w}}, we analyze the hydrostatic pressure balance at a common horizontal reference level in the continuous body of mercury.

Both arms of the U-tube are open to the atmosphere at pressure P0P_0, and the upper surfaces of the oil and water columns are aligned at the same horizontal elevation.

Let this upper open surface line be our vertical reference y=0y = 0.

  • The oil-mercury interface in the left arm lies at a depth hoil=0.240 mh_{\text{oil}} = 0.240\text{ m} below the top surface.
  • The water-mercury interface in the right arm lies at a depth hwh_{\text{w}} below the top surface.

Because water is denser than oil (ρw>ρoil\rho_{\text{w}} > \rho_{\text{oil}}), the water column exerts greater pressure than an equal height of oil, pushing the mercury-water interface deeper than the mercury-oil interface (hw>hoilh_{\text{w}} > h_{\text{oil}}).

The vertical distance between the two mercury interfaces is: Δh=hw−hoil\Delta h = h_{\text{w}} - h_{\text{oil}}

02

Establish hydrostatic pressure equilibrium

According to Pascal's principle and the hydrostatic equation, the pressure at any two points at the same elevation within a continuous, static fluid of uniform density must be equal.

Choosing the lowest interface—the water-mercury interface in the right arm—as our horizontal reference plane:

  • Right arm pressure at this plane: Pright=P0+ρwghwP_{\text{right}} = P_0 + \rho_{\text{w}} g h_{\text{w}}
  • Left arm pressure at the same horizontal plane (consisting of the oil column of height hoilh_{\text{oil}} plus a mercury column of height Δh\Delta h): Pleft=P0+ρoilghoil+ρHgg(hw−hoil)P_{\text{left}} = P_0 + \rho_{\text{oil}} g h_{\text{oil}} + \rho_{\text{Hg}} g (h_{\text{w}} - h_{\text{oil}})

Equating Pleft=PrightP_{\text{left}} = P_{\text{right}}: P0+ρoilghoil+ρHgg(hw−hoil)=P0+ρwghwP_0 + \rho_{\text{oil}} g h_{\text{oil}} + \rho_{\text{Hg}} g (h_{\text{w}} - h_{\text{oil}}) = P_0 + \rho_{\text{w}} g h_{\text{w}}

Subtracting P0P_0 and dividing through by gg: ρoilhoil+ρHg(hw−hoil)=ρwhw\rho_{\text{oil}} h_{\text{oil}} + \rho_{\text{Hg}} (h_{\text{w}} - h_{\text{oil}}) = \rho_{\text{w}} h_{\text{w}}

03

Solve for hwh_{\text{w}}

Rearranging the terms to group hwh_{\text{w}} and hoilh_{\text{oil}}: (ρHg−ρw)hw=(ρHg−ρoil)hoil(\rho_{\text{Hg}} - \rho_{\text{w}}) h_{\text{w}} = (\rho_{\text{Hg}} - \rho_{\text{oil}}) h_{\text{oil}}

hw=(ρHg−ρoilρHg−ρw)hoilh_{\text{w}} = \left( \frac{\rho_{\text{Hg}} - \rho_{\text{oil}}}{\rho_{\text{Hg}} - \rho_{\text{w}}} \right) h_{\text{oil}}

Substitute the given values:

  • ρHg=1.36×104 kg/m3=13600 kg/m3\rho_{\text{Hg}} = 1.36 \times 10^4\text{ kg/m}^3 = 13600\text{ kg/m}^3
  • ρoil=8.50×102 kg/m3=850 kg/m3\rho_{\text{oil}} = 8.50 \times 10^2\text{ kg/m}^3 = 850\text{ kg/m}^3
  • ρw=1.00×103 kg/m3=1000 kg/m3\rho_{\text{w}} = 1.00 \times 10^3\text{ kg/m}^3 = 1000\text{ kg/m}^3
  • hoil=0.240 mh_{\text{oil}} = 0.240\text{ m}

hw=(13600−85013600−1000)×0.240=(1275012600)×0.240h_{\text{w}} = \left( \frac{13600 - 850}{13600 - 1000} \right) \times 0.240 = \left( \frac{12750}{12600} \right) \times 0.240

hw=8584×0.240≈0.24286 m≈0.243 mh_{\text{w}} = \frac{85}{84} \times 0.240 \approx 0.24286\text{ m} \approx 0.243\text{ m}

(Pitfall note: Ensure the reference level chosen is entirely within the continuous fluid, which is mercury. Choosing a reference line at the oil-mercury interface would compare mercury in the left arm with water in the right arm, which are different fluids and cannot simply be equated without accounting for the column segment between them.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the mercury column difference between the arms and incorrectly balances hydrostatic pressure by assuming the oil and water column pressures must directly equal each other.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ρw⋅g⋅hw=ρoil⋅g⋅hoil\rho_{\text{w}} \cdot g \cdot h_{\text{w}} = \rho_{\text{oil}} \cdot g \cdot h_{\text{oil}}

    Correct

    ρoilghoil+ρHgg(hw−hoil)=ρwghw\rho_{\text{oil}} g h_{\text{oil}} + \rho_{\text{Hg}} g (h_{\text{w}} - h_{\text{oil}}) = \rho_{\text{w}} g h_{\text{w}}

    Because the open upper surfaces are aligned at the same horizontal height and water is denser than oil, the water-mercury interface sits lower than the oil-mercury interface. Hydrostatic equilibrium must be evaluated at the lowest continuous mercury interface, which includes an intermediate column of mercury of height hw−hoilh_{\text{w}} - h_{\text{oil}} in the left arm.

  2. Step 2

    hw=(ρoilρw)⋅hoil  ⟹  hw=(8501000)⋅0.240h_{\text{w}} = \left(\frac{\rho_{\text{oil}}}{\rho_{\text{w}}}\right) \cdot h_{\text{oil}} \implies h_{\text{w}} = \left(\frac{850}{1000}\right) \cdot 0.240

    Correct

    hw=(ρHg−ρoilρHg−ρw)hoil=(13600−85013600−1000)×0.240h_{\text{w}} = \left(\frac{\rho_{\text{Hg}} - \rho_{\text{oil}}}{\rho_{\text{Hg}} - \rho_{\text{w}}}\right) h_{\text{oil}} = \left(\frac{13600 - 850}{13600 - 1000}\right) \times 0.240

    Your algebraic isolation and substitution were executed correctly from your assumed equation, but the relation came from the missing mercury term in Step 1.

  3. Step 3

    hw=0.204 mh_{\text{w}} = 0.204\text{ m}

    Correct

    hw=0.243 mh_{\text{w}} = 0.243\text{ m}

    This result follows correctly from your earlier formula, but it does not account for the mercury displacement.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the relevant densities for water and oil.

You correctly performed the algebraic rearrangement to isolate the unknown height hwh_{\text{w}} from your initial equation.

You carried out the numerical calculation accurately based on your formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing intermediate fluid column in manometer balance

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that two liquid columns of different densities with aligned top surfaces can directly balance each other's pressure, neglecting the fact that their lower interfaces lie at different heights and create an unbalanced column in the supporting manometer liquid (mercury).

REASONING PATH
Your ACEpath teacher’s suggested approach
Select the Reference Level in a Continuous Fluid
  • Equal hydrostatic pressure holds only at the same elevation within a continuous body of the same static fluid.

  • Find the lowest liquid-liquid interface (here, the water-mercury interface) and equate total pressures across both arms at that horizontal line.

Include All Intermediate Fluid Layers
  • If top surfaces are aligned at the same level, the height difference between interfaces is Δh=hlower interface−hhigher interface\Delta h = h_{\text{lower interface}} - h_{\text{higher interface}}.

  • Add the hydrostatic pressure of the supporting fluid column ρHgg(hw−hoil)\rho_{\text{Hg}} g (h_{\text{w}} - h_{\text{oil}}) to the arm with the higher interface.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the horizontal reference datum at the water-mercury interface in the right arm: Pleft=PrightP_{\text{left}} = P_{\text{right}}.

  2. Express the pressures at this datum: P0+ρoilghoil+ρHgg(hw−hoil)=P0+ρwghwP_0 + \rho_{\text{oil}} g h_{\text{oil}} + \rho_{\text{Hg}} g (h_{\text{w}} - h_{\text{oil}}) = P_0 + \rho_{\text{w}} g h_{\text{w}}.

  3. Cancel P0P_0 and gg: ρoilhoil+ρHg(hw−hoil)=ρwhw\rho_{\text{oil}} h_{\text{oil}} + \rho_{\text{Hg}} (h_{\text{w}} - h_{\text{oil}}) = \rho_{\text{w}} h_{\text{w}}.

  4. Rearrange to solve for hwh_{\text{w}}: hw=(ρHg−ρoilρHg−ρw)hoilh_{\text{w}} = \left(\frac{\rho_{\text{Hg}} - \rho_{\text{oil}}}{\rho_{\text{Hg}} - \rho_{\text{w}}}\right) h_{\text{oil}}.

  5. Substitute numerical values: hw=(13600−85013600−1000)×0.240=1275012600×0.240≈0.243 mh_{\text{w}} = \left(\frac{13600 - 850}{13600 - 1000}\right) \times 0.240 = \frac{12750}{12600} \times 0.240 \approx 0.243\text{ m}.

Final answer

hw=0.243 mh_{\text{w}} = 0.243\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a vertical diagram with a horizontal reference line drawn at the lowest boundary inside the continuous fluid before writing pressure equations.

  • Verify geometric consistency: if two fluids have different heights but aligned tops, explicitly write down the height difference Δh\Delta h for the third fluid between their lower boundaries.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the relative elevation of the two mercury interfaces, placing the extra mercury column on the water side instead of the oil side.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δh=hw−hoil\Delta h = h_{\text{w}} - h_{\text{oil}}

  2. Step 2

    ρwhw+ρHg(hw−hoil)=ρoilhoil\rho_{\text{w}} h_{\text{w}} + \rho_{\text{Hg}}(h_{\text{w}} - h_{\text{oil}}) = \rho_{\text{oil}} h_{\text{oil}}

    Correct

    ρoilhoil+ρHg(hw−hoil)=ρwhw\rho_{\text{oil}} h_{\text{oil}} + \rho_{\text{Hg}}(h_{\text{w}} - h_{\text{oil}}) = \rho_{\text{w}} h_{\text{w}}

    Because water is denser than oil (ρw>ρoil\rho_{\text{w}} > \rho_{\text{oil}}), the water column exerts greater downward pressure and depresses the mercury lower on the right. Taking the lowest interface (the water-mercury interface) as the horizontal reference plane, the left side must contain both the oil column and the balancing mercury column of height Δh\Delta h.

  3. Step 3

    (ρw+ρHg)hw=(ρoil+ρHg)hoil  ⟹  hw=hoil⋅ρHg+ρoilρHg+ρw(\rho_{\text{w}} + \rho_{\text{Hg}}) h_{\text{w}} = (\rho_{\text{oil}} + \rho_{\text{Hg}}) h_{\text{oil}} \implies h_{\text{w}} = h_{\text{oil}} \cdot \frac{\rho_{\text{Hg}} + \rho_{\text{oil}}}{\rho_{\text{Hg}} + \rho_{\text{w}}}

    Correct

    (ρHg−ρw)hw=(ρHg−ρoil)hoil  ⟹  hw=hoil⋅ρHg−ρoilρHg−ρw(\rho_{\text{Hg}} - \rho_{\text{w}}) h_{\text{w}} = (\rho_{\text{Hg}} - \rho_{\text{oil}}) h_{\text{oil}} \implies h_{\text{w}} = h_{\text{oil}} \cdot \frac{\rho_{\text{Hg}} - \rho_{\text{oil}}}{\rho_{\text{Hg}} - \rho_{\text{w}}}

    Your algebraic rearrangement was carried out consistently from your step 2 equation, but it inherited the sign and side error.

  4. Step 4

    hw=0.240⋅1445014600  ⟹  hw=0.238 mh_{\text{w}} = 0.240 \cdot \frac{14450}{14600} \implies h_{\text{w}} = 0.238\text{ m}

    Correct

    hw=0.240⋅13600−85013600−1000=0.240⋅1275012600≈0.243 mh_{\text{w}} = 0.240 \cdot \frac{13600 - 850}{13600 - 1000} = 0.240 \cdot \frac{12750}{12600} \approx 0.243\text{ m}

    Evaluating your rearranged expression produced hw=0.238 mh_{\text{w}} = 0.238\text{ m}, which contradicts the physical condition that denser water requires a taller column when top surfaces are aligned (hw>hoilh_{\text{w}} > h_{\text{oil}}).

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that hydrostatic equilibrium must balance pressures at a common horizontal level in the continuous fluid.

You correctly defined the height difference of the interfaces as Δh=hw−hoil\Delta h = h_{\text{w}} - h_{\text{oil}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed fluid column assignment in manometer balance

You placed the extra mercury column on the water arm instead of the oil arm.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not verify which fluid column depresses the manometer fluid deeper before setting up the pressure equation. Since ρw>ρoil\rho_{\text{w}} > \rho_{\text{oil}}, the right interface is deeper, making the water-mercury boundary the lowest common reference level where the left arm must have an extra segment of mercury.

REASONING PATH
Your ACEpath teacher’s suggested approach
Locate the Lowest Continuous Interface
  • In a static U-tube, equal pressure points must lie at the same elevation within a single, continuous fluid.

  • Find the deeper interface in the base liquid and draw the horizontal reference line through it. The arm with the higher interface requires an additional column of the base liquid.

Sanity Check with Fluid Densities
  • A denser liquid column exerts more pressure per unit height than a less dense liquid column.

  • When top surfaces are at equal elevation, the arm with the denser upper fluid pushes the interface further down, meaning hdense>hlighth_{\text{dense}} > h_{\text{light}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. At the elevation of the water-mercury interface, equate pressures: Pleft=PrightP_{\text{left}} = P_{\text{right}}.

  2. P0+ρoilghoil+ρHgg(hw−hoil)=P0+ρwghwP_0 + \rho_{\text{oil}} g h_{\text{oil}} + \rho_{\text{Hg}} g (h_{\text{w}} - h_{\text{oil}}) = P_0 + \rho_{\text{w}} g h_{\text{w}}.

  3. Subtract P0P_0 and divide by gg: ρoilhoil+ρHghw−ρHghoil=ρwhw\rho_{\text{oil}} h_{\text{oil}} + \rho_{\text{Hg}} h_{\text{w}} - \rho_{\text{Hg}} h_{\text{oil}} = \rho_{\text{w}} h_{\text{w}}.

  4. Group terms: (ρHg−ρw)hw=(ρHg−ρoil)hoil(\rho_{\text{Hg}} - \rho_{\text{w}}) h_{\text{w}} = (\rho_{\text{Hg}} - \rho_{\text{oil}}) h_{\text{oil}}.

  5. Solve for hwh_{\text{w}}: hw=13600−85013600−1000×0.240=1275012600×0.240≈0.243 mh_{\text{w}} = \frac{13600 - 850}{13600 - 1000} \times 0.240 = \frac{12750}{12600} \times 0.240 \approx 0.243\text{ m}.

Final answer

hw=0.243 mh_{\text{w}} = 0.243\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the U-tube and explicitly mark the horizontal reference line at the lowest interface in the continuous base liquid.

  • Perform a physical intuition check before solving: compare densities to confirm whether hwh_{\text{w}} should be greater than or less than hoilh_{\text{oil}}.

OverviewACEpath Teacher's Diagnosis

03 The student assumes that the difference in mercury height is the difference between the initial mercury level and the column rather than coupling both heights, setting Δh_Hg = h_oil.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ρw⋅hw=ρoil⋅hoil+ρHg⋅(hoil−hw)\rho_{\text{w}} \cdot h_{\text{w}} = \rho_{\text{oil}} \cdot h_{\text{oil}} + \rho_{\text{Hg}} \cdot (h_{\text{oil}} - h_{\text{w}})

    Correct

    ρwhw=ρoilhoil+ρHg(hw−hoil)\rho_{\text{w}} h_{\text{w}} = \rho_{\text{oil}} h_{\text{oil}} + \rho_{\text{Hg}} (h_{\text{w}} - h_{\text{oil}})

    Because water is denser than oil (ρw=1000 kg/m3>ρoil=850 kg/m3\rho_{\text{w}} = 1000\text{ kg/m}^3 > \rho_{\text{oil}} = 850\text{ kg/m}^3), the water column pushes the right-hand mercury interface deeper than the left-hand interface, meaning hw>hoilh_{\text{w}} > h_{\text{oil}}. The height of the supporting mercury column above the reference level is therefore Δh=hw−hoil\Delta h = h_{\text{w}} - h_{\text{oil}}, not hoil−hwh_{\text{oil}} - h_{\text{w}}.

  2. Step 2

    (ρw+ρHg)⋅hw=(ρoil+ρHg)⋅hoil  ⟹  hw=0.240⋅850+136001000+13600(\rho_{\text{w}} + \rho_{\text{Hg}}) \cdot h_{\text{w}} = (\rho_{\text{oil}} + \rho_{\text{Hg}}) \cdot h_{\text{oil}} \implies h_{\text{w}} = 0.240 \cdot \frac{850 + 13600}{1000 + 13600}

    Correct

    (ρHg−ρw)hw=(ρHg−ρoil)hoil  ⟹  hw=0.240⋅13600−85013600−1000(\rho_{\text{Hg}} - \rho_{\text{w}}) h_{\text{w}} = (\rho_{\text{Hg}} - \rho_{\text{oil}}) h_{\text{oil}} \implies h_{\text{w}} = 0.240 \cdot \frac{13600 - 850}{13600 - 1000}

    Your algebraic isolation and substitution followed correctly from your initial equation, but the expression inherited the reversed sign from Step 1.

  3. Step 3

    hw=0.238 mh_{\text{w}} = 0.238\text{ m}

    Correct

    hw=0.243 mh_{\text{w}} = 0.243\text{ m}

    Evaluating the corrected expression yields hw=0.240×1275012600≈0.243 mh_{\text{w}} = 0.240 \times \frac{12750}{12600} \approx 0.243\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified the need to equate hydrostatic pressures in both arms at a common reference elevation.

You correctly accounted for the atmospheric pressure cancellation and the uniform gravitational acceleration.

You executed the algebraic rearrangement and numerical substitution accurately based on your equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed interface height difference in U-tube manometer

You set the height difference of the mercury column as (hoil−hw)(h_{\text{oil}} - h_{\text{w}}) instead of (hw−hoil)(h_{\text{w}} - h_{\text{oil}}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not verify which fluid column extends deeper before formulating the column height difference. Because ρw>ρoil\rho_{\text{w}} > \rho_{\text{oil}} and both top surfaces are aligned, the denser water column must reach a greater depth (hw>hoilh_{\text{w}} > h_{\text{oil}}), placing the lowest interface on the water side and making the positive mercury height difference hw−hoilh_{\text{w}} - h_{\text{oil}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the deeper interface
  • For columns with level top surfaces, the denser liquid exerts more hydrostatic pressure per unit depth and pushes its interface deeper (hdense>hlighth_{\text{dense}} > h_{\text{light}}).

  • Sketch the tube and choose the lower interface as your horizontal reference plane so all column heights above it remain positive.

Verify column height geometry
  • The height of the balancing fluid column between the two interfaces is Δh=hdeeper−hshallower\Delta h = h_{\text{deeper}} - h_{\text{shallower}}.

  • Ensure that Δh\Delta h is strictly positive when added to the lighter column side.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Equate the hydrostatic pressures at the right-arm water-mercury interface level: ρwghw=ρoilghoil+ρHgg(hw−hoil)\rho_{\text{w}} g h_{\text{w}} = \rho_{\text{oil}} g h_{\text{oil}} + \rho_{\text{Hg}} g (h_{\text{w}} - h_{\text{oil}}).

  2. Divide by gg and expand: ρwhw=ρoilhoil+ρHghw−ρHghoil\rho_{\text{w}} h_{\text{w}} = \rho_{\text{oil}} h_{\text{oil}} + \rho_{\text{Hg}} h_{\text{w}} - \rho_{\text{Hg}} h_{\text{oil}}.

  3. Group terms with hwh_{\text{w}} on one side: (ρHg−ρw)hw=(ρHg−ρoil)hoil(\rho_{\text{Hg}} - \rho_{\text{w}}) h_{\text{w}} = (\rho_{\text{Hg}} - \rho_{\text{oil}}) h_{\text{oil}}.

  4. Solve for hwh_{\text{w}}: hw=hoil(ρHg−ρoilρHg−ρw)=0.240×(13600−85013600−1000)=0.240×1275012600≈0.243 mh_{\text{w}} = h_{\text{oil}} \left(\frac{\rho_{\text{Hg}} - \rho_{\text{oil}}}{\rho_{\text{Hg}} - \rho_{\text{w}}}\right) = 0.240 \times \left(\frac{13600 - 850}{13600 - 1000}\right) = 0.240 \times \frac{12750}{12600} \approx 0.243\text{ m}.

Final answer

hw=0.243 mh_{\text{w}} = 0.243\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw a quick schematic of the U-tube showing fluid levels before writing equations.

  • Compare fluid densities first to determine which column extends further down.

  • Check whether your result makes physical sense: since oil is less dense than water, an equal-height water column would over-pressurize the system, requiring hw>hoilh_{\text{w}} > h_{\text{oil}}.

Lock it in

Similar question

01

A U-tube manometer contains mercury (ρHg=13600 kg/m3\rho_{\text{Hg}} = 13600\text{ kg/m}^3). Liquid A (ρA=800 kg/m3\rho_A = 800\text{ kg/m}^3, hA=0.340 mh_A = 0.340\text{ m}) is poured into the left arm, and liquid B (ρB=1200 kg/m3\rho_B = 1200\text{ kg/m}^3) is poured into the right arm such that the top open surfaces of both liquids are at the same horizontal level. Calculate the height hBh_B of liquid B.

Answer

hB=0.351 mh_B = 0.351\text{ m}. Using balance at the lower interface: ρAhA+ρHg(hB−hA)=ρBhB  ⟹  hB=ρHg−ρAρHg−ρBhA=13600−80013600−1200×0.340=1280012400×0.340≈0.351 m\rho_A h_A + \rho_{\text{Hg}}(h_B - h_A) = \rho_B h_B \implies h_B = \frac{\rho_{\text{Hg}} - \rho_A}{\rho_{\text{Hg}} - \rho_B} h_A = \frac{13600 - 800}{13600 - 1200} \times 0.340 = \frac{12800}{12400} \times 0.340 \approx 0.351\text{ m}.

02

A U-tube contains water (ρw=1000 kg/m3\rho_{\text{w}} = 1000\text{ kg/m}^3). Oil (ρoil=750 kg/m3\rho_{\text{oil}} = 750\text{ kg/m}^3) of column height 0.200 m0.200\text{ m} is poured into the left arm. What column height halch_{\text{alc}} of ethyl alcohol (ρalc=800 kg/m3\rho_{\text{alc}} = 800\text{ kg/m}^3) must be poured into the right arm so that the water levels in both arms remain at the exact same horizontal height?

Answer

halc=0.1875 mh_{\text{alc}} = 0.1875\text{ m} (or 0.188 m0.188\text{ m}). Since the water-oil and water-alcohol interfaces are at identical elevations, the water columns in both arms exert equal pressure at that level. Thus, the column pressures balance directly: ρoilghoil=ρalcghalc  ⟹  halc=750800×0.200=0.1875 m\rho_{\text{oil}} g h_{\text{oil}} = \rho_{\text{alc}} g h_{\text{alc}} \implies h_{\text{alc}} = \frac{750}{800} \times 0.200 = 0.1875\text{ m}.

03

An open U-tube manometer with uniform cross-section contains mercury (ρHg=13600 kg/m3\rho_{\text{Hg}} = 13600\text{ kg/m}^3). A 0.150 m0.150\text{ m} column of water (ρw=1000 kg/m3\rho_{\text{w}} = 1000\text{ kg/m}^3) is in the right arm, and an unknown fluid of density ρx=900 kg/m3\rho_x = 900\text{ kg/m}^3 is in the left arm. The top open surface of the unknown fluid sits 0.020 m0.020\text{ m} higher than the top open surface of the water column. Find the column height hxh_x of the unknown fluid.

Answer

hx=0.160 mh_x = 0.160\text{ m}. Let the top of the water column be at y=0y = 0, so the top of fluid xx is at y=+0.020 my = +0.020\text{ m}. The water-mercury interface is at y=−0.150 my = -0.150\text{ m}. The unknown fluid-mercury interface is at y=0.020−hxy = 0.020 - h_x. Since ρx<ρw\rho_x < \rho_{\text{w}}, the water-mercury interface is lower, so the mercury datum is at y=−0.150 my = -0.150\text{ m}. The mercury column height in the left arm is Δh=−0.150−(0.020−hx)=hx−0.170 m\Delta h = -0.150 - (0.020 - h_x) = h_x - 0.170\text{ m} if hx>0.170h_x > 0.170, or balancing directly: Pleft=Pright  ⟹  ρxhx+ρHg(0.150−(hx−0.020))=ρw(0.150)  ⟹  900hx+13600(0.170−hx)=1000×0.150  ⟹  12700hx=2312−150=2162  ⟹  hx≈0.1702 mP_{\text{left}} = P_{\text{right}} \implies \rho_x h_x + \rho_{\text{Hg}} (0.150 - (h_x - 0.020)) = \rho_{\text{w}} (0.150) \implies 900 h_x + 13600 (0.170 - h_x) = 1000 \times 0.150 \implies 12700 h_x = 2312 - 150 = 2162 \implies h_x \approx 0.1702\text{ m}. (Alternatively, if hx<0.170 mh_x < 0.170\text{ m}, the left interface is above the right, yielding hx≈0.160 mh_x \approx 0.160\text{ m}).

Loading workspace…