Resources
A solid cube of balsa wood of side length and density is held completely submerged at the bottom of a water tank of depth containing fresh water (). A light spring of force constant is attached between the bottom of the tank and the center of the bottom face of the cube. The cube is in static equilibrium while fully submerged. Calculate (a) the equilibrium extension of the spring, and (b) if the spring is suddenly cut, the initial upward acceleration of the cube at the instant of release. Neglect water drag at the initial instant and take .
Answer and steps
Final answer
(a) ; (b)
Steps
Determine the Volume and Mass of the Cube
The volume of the solid cube of side length is:
The mass of the balsa cube is:
The downward gravitational force (weight) acting on the cube is:
Calculate the Buoyant Force
By Archimedes' principle, the buoyant force equals the weight of the fluid displaced by the submerged object. Since the cube is completely submerged:
Find the Equilibrium Extension of the Spring (Part a)
Because the wood is less dense than water (), the upward buoyant force exceeds the downward gravitational force (). To maintain static equilibrium, the spring attached to the bottom must exert a downward restoring force:
Setting the net vertical force to zero:
Substitute the known values:
Calculate the Initial Acceleration upon Release (Part b)
At the instant the spring is cut, the spring force drops immediately to zero (), while velocity is still zero, so drag forces are negligible. The net upward force acting on the cube is:
Applying Newton's second law:
Substitute the numerical values:
Typical errors
01 The student forgets to subtract the gravitational force of the wood when setting up the spring equilibrium, equating the spring force directly to the buoyant force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You balanced the spring force solely against the buoyant force, forgetting that gravity also pulls the balsa cube downward. The downward forces must sum to equal the upward buoyant force: .
- Step 3
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the volume and buoyant force acting on the fully submerged cube.
You correctly determined the mass and gravitational force acting on the cube in part (b).
You applied Newton's second law accurately to find the initial acceleration once the spring was cut.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeIn part (a), you equated instead of including the cube's weight in the equilibrium balance.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisSetting up the equilibrium equation without drawing or verifying a complete free-body diagram for the submerged object led to omitting gravity when calculating the spring's restoring force.
REASONING PATH
Your ACEpath teacher’s suggested approach- Free-Body Diagram for Submerged Objects
Any submerged object in static equilibrium must satisfy , accounting for buoyant force, gravity, and any contact or tension forces.
Always draw all vertical vectors: upward buoyant force , downward weight , and any downward spring/tether force , giving .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the vertical equilibrium condition: .
Express the spring force: .
Substitute the numerical values: .
Solve for extension: .
(a) ; (b)
02 The student divides the net force by the mass of the displaced water rather than the mass of the accelerating wooden cube when calculating acceleration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Newton's second law () requires the mass of the accelerating body itself (the wooden cube, ), not the mass of the displaced fluid ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the volume, mass, gravitational force, and buoyant force on the cube.
You set up the static equilibrium force balance and found the correct spring extension for part (a).
You correctly found the net upward force acting on the cube at the moment the spring is cut.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeDividing the net force by fluid mass instead of object mass
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn fluid mechanics problems involving Archimedes' principle, students often confuse the mass of the displaced fluid () used to find buoyant force with the mass of the accelerating object () required in Newton's second law ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Identifying Accelerating Mass
Newton's second law states . The fluid mass only determines the buoyant force; it does not constitute the inertia of the body.
Always circle or explicitly label the mass of the object that is moving before applying .
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the mass of the wooden cube: .
Apply Newton's second law to the cube: .
Calculate the result: .
(a) ; (b)
03 The student squares the side length instead of cubing it when finding the volume of the cube, resulting in incorrect forces and downstream values.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You squared the side length rather than cubing it. The volume of a three-dimensional cube of side length is given by .
- Step 2Correct
Your formulas for buoyant force, mass, and gravitational force are correct, but substituting the incorrect volume makes each value 10 times too large.
- Step 3Correct
You correctly balanced the upward buoyant force against weight and spring tension, but using the inflated net force resulted in instead of .
- Step 4Correct
Your application of Newton's second law is conceptually sound. Because both and are directly proportional to volume , the factor-of-10 error canceled out in the ratio, giving the correct numerical acceleration.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified all three vertical forces acting on the submerged cube in static equilibrium.
You applied Archimedes' principle and Newton's second law accurately.
You solved for the initial acceleration by recognizing that spring force and drag vanish at release.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of , treating a 3D cube as a 2D square.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing geometric dimensionality led you to use an area formula () rather than a volume formula () when calculating fluid displacement and mass.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Dimensional Consistency
Volume must have units of (e.g., ). Squaring a side length yields an area in .
Verify that is an area, whereas volume requires .
- Physical Reasonableness of Spring Stretch
The tank depth is , so a spring stretch of would exceed the entire water depth.
Always compare calculated lengths with given container dimensions as an order-of-magnitude sanity check.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the cube volume: .
Recalculate mass and forces: , , and .
Solve for spring extension: .
(a) ; (b)
Lock it in
When a submerged object less dense than water is held from below by a spring in equilibrium, what are all the vertical forces acting on it?
Upward buoyant force , downward weight , and downward spring force . Equilibrium requires .
Similar question
A small wooden cylinder of mass is fully submerged in water, where it experiences a buoyant force of . It is anchored to the bottom of the container by a vertical cord. Find the tension in the cord. (Take .)
Answer
. Key steps:
- Weight: .
- Equilibrium: .
- Solve: .
A solid plastic sphere of volume and density is completely submerged in oil of density . A vertical spring with connects the sphere to the floor of the tank. Find (a) the equilibrium extension of the spring, and (b) the sphere's acceleration the instant the spring snaps. (Take .)
Answer
(a) ; (b) . Key steps:
- Mass: , weight .
- Buoyant force: .
- Spring force: .
- Acceleration upon release: .
A hollow metal buoy of mass is held submerged in seawater () by a spring () anchored to the seabed. The spring is stretched by . Calculate (a) the buoyant force acting on the buoy, and (b) the volume of the buoy. (Take .)
Answer
(a) ; (b) . Key steps:
- Forces acting downward: weight and spring force .
- Vertical equilibrium: .
- Volume from Archimedes' principle: .