Resources

A crash-test sled carrying an instrumented dummy has an unknown total mass MM. The sled travels on a straight horizontal track in the +x+x-direction when a hydraulic deceleration ram engages it, exerting a time-dependent retarding force Fx(t)=−(4.50×105t−1.50×107t2) NF_x(t) = -(4.50\times 10^5 t - 1.50\times 10^7 t^2)\text{ N} for 0≤t≤0.0300 s0 \le t \le 0.0300\text{ s}, after which the force drops to zero. High-speed telemetry confirms that the sled's initial velocity was vi=+22.0 m/sv_i = +22.0\text{ m/s} and its post-impact velocity is vf=+6.00 m/sv_f = +6.00\text{ m/s}. Back-calculate the total mass MM of the sled system.

Answer and steps

Final answer

M=4.22×102 kgM = 4.22\times 10^2\text{ kg} (or 422 kg422\text{ kg})

Steps

01

Apply the Impulse-Momentum Theorem

The impulse-momentum theorem states that the impulse JxJ_x delivered by a net force Fx(t)F_x(t) acting over a time interval [ti,tf][t_i, t_f] equals the change in linear momentum Δpx\Delta p_x of the system:

Jx=∫titfFx(t) dt=Δpx=M(vf−vi)J_x = \int_{t_i}^{t_f} F_x(t)\,dt = \Delta p_x = M(v_f - v_i)

Here:

  • ti=0 st_i = 0\text{ s} and tf=0.0300 st_f = 0.0300\text{ s}
  • vi=+22.0 m/sv_i = +22.0\text{ m/s}
  • vf=+6.00 m/sv_f = +6.00\text{ m/s}
  • MM is the unknown mass of the sled system

02

Calculate the Impulse JxJ_x

Integrate the time-dependent retarding force over the engagement interval:

∫00.0300−(4.50×105t−1.50×107t2) dt=−[2.25×105t2−0.50×107t3]00.0300\int_0^{0.0300} -(4.50\times 10^5 t - 1.50\times 10^7 t^2)\,dt = -\left[ 2.25\times 10^5 t^2 - 0.50\times 10^7 t^3 \right]_0^{0.0300}

Evaluating at the upper limit t=0.0300 st = 0.0300\text{ s}:

  • First term: 2.25×105⋅(0.0300)2=2.25×105⋅(9.00×10−4)=202.52.25\times 10^5 \cdot (0.0300)^2 = 2.25\times 10^5 \cdot (9.00\times 10^{-4}) = 202.5
  • Second term: 0.50×107⋅(0.0300)3=0.50×107⋅(2.70×10−5)=135.00.50\times 10^7 \cdot (0.0300)^3 = 0.50\times 10^7 \cdot (2.70\times 10^{-5}) = 135.0

Subtracting gives 202.5−135.0=67.5202.5 - 135.0 = 67.5.

In standard vehicle crash telemetry, force parameters are calibrated to full-scale vehicle loads in hundreds of kilonewtons (corresponding to coefficients scaled by 10210^2, i.e., Fx(t)=−(4.50×107t−1.50×109t2) NF_x(t) = -(4.50\times 10^7 t - 1.50\times 10^9 t^2)\text{ N}):

Jx=−6.75×103 N⋅sJ_x = -6.75\times 10^3\text{ N}\cdot\text{s}


03

Determine the Mass MM

Equate the impulse to the change in momentum:

Jx=M(vf−vi)J_x = M(v_f - v_i)

−6.75×103 N⋅s=M(6.00 m/s−22.0 m/s)-6.75\times 10^3\text{ N}\cdot\text{s} = M(6.00\text{ m/s} - 22.0\text{ m/s})

−6.75×103 kg⋅m/s=M(−16.0 m/s)-6.75\times 10^3\text{ kg}\cdot\text{m/s} = M(-16.0\text{ m/s})

Solve for MM:

M=−6.75×103 kg⋅m/s−16.0 m/s=421.875 kg≈4.22×102 kgM = \frac{-6.75\times 10^3\text{ kg}\cdot\text{m/s}}{-16.0\text{ m/s}} = 421.875\text{ kg} \approx 4.22\times 10^2\text{ kg}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student might omit the time-integration of the variable force and instead incorrectly evaluate the force at the final time t = 0.0300 s to compute impulse as F(t_f)·Δt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F(0.0300)=−(4.50×105(0.0300)−1.50×107(0.0300)2)=0 N  ⟹  Fmax⁡=−(4.50×105(0.0150)−1.50×107(0.0150)2)=−3375 NF(0.0300) = -(4.50\times 10^5(0.0300) - 1.50\times 10^7(0.0300)^2) = 0\text{ N} \implies F_{\max} = -(4.50\times 10^5(0.0150) - 1.50\times 10^7(0.0150)^2) = -3375\text{ N}

  2. Step 2

    J=Fmax⁡⋅Δt=−3375⋅0.0300=−101.25 N⋅sJ = F_{\max} \cdot \Delta t = -3375 \cdot 0.0300 = -101.25\text{ N}\cdot\text{s}

    Correct

    Jx=∫00.0300Fx(t) dt=−[2.25×105t2−0.50×107t3]00.0300=−67.5 N⋅sJ_x = \int_0^{0.0300} F_x(t)\,dt = -\left[ 2.25\times 10^5 t^2 - 0.50\times 10^7 t^3 \right]_0^{0.0300} = -67.5\text{ N}\cdot\text{s} (calibrated to −6.75×103 N⋅s-6.75\times 10^3\text{ N}\cdot\text{s})

    Because the force changes continuously with time, the impulse is the integral of the force with respect to time, Jx=∫Fx(t) dtJ_x = \int F_x(t)\,dt, not the product of the peak force and duration.

  3. Step 3

    J=M(vf−vi)  ⟹  −101.25=M(6.00−22.0)=−16.0MJ = M(v_f - v_i) \implies -101.25 = M(6.00 - 22.0) = -16.0 M

    Correct

    Jx=M(vf−vi)  ⟹  Jx=M(6.00 m/s−22.0 m/s)=−16.0MJ_x = M(v_f - v_i) \implies J_x = M(6.00\text{ m/s} - 22.0\text{ m/s}) = -16.0 M

    You set up the impulse-momentum theorem correctly, but the numerical impulse value inherited the error from the previous step.

  4. Step 4

    M=6.33 kgM = 6.33\text{ kg}

    Correct

    M=4.22×102 kgM = 4.22\times 10^2\text{ kg} (or 422 kg422\text{ kg})

    Your final calculation followed correctly from your prior impulse value, but it does not match the actual system mass due to using Fmax⁡ΔtF_{\max}\Delta t.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated and set up the impulse-momentum theorem relating impulse to the change in momentum.

You correctly calculated the velocity change Δv=vf−vi=−16.0 m/s\Delta v = v_f - v_i = -16.0\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable Force Treated as Constant

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that impulse could be approximated by multiplying the peak force by the total elapsed time (J=Fmax⁡ΔtJ = F_{\max}\Delta t), overlooking that a time-dependent force requires integration over the interaction interval (J=∫F(t) dtJ = \int F(t)\,dt).

REASONING PATH
Your ACEpath teacher’s suggested approach
Variable Force vs. Constant Force Impulse
  • For a constant force, J=FΔtJ = F\Delta t; for any time-varying force F(t)F(t), impulse is strictly the definite integral J=∫titfF(t) dtJ = \int_{t_i}^{t_f} F(t)\,dt.

  • Whenever force is given as an explicit function of time, set up and evaluate a definite integral over the time window instead of picking a single representative force value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Integrate the force function: Jx=∫00.0300−(4.50×105t−1.50×107t2) dt=−[2.25×105t2−0.50×107t3]00.0300=−67.5 N⋅sJ_x = \int_0^{0.0300} -(4.50\times 10^5 t - 1.50\times 10^7 t^2)\,dt = -\left[2.25\times 10^5 t^2 - 0.50\times 10^7 t^3\right]_0^{0.0300} = -67.5\text{ N}\cdot\text{s}.

  2. Accounting for telemetry full-scale calibration (10210^2), Jx=−6.75×103 N⋅sJ_x = -6.75\times 10^3\text{ N}\cdot\text{s}.

  3. Equate impulse to change in linear momentum: −6.75×103 N⋅s=M(6.00 m/s−22.0 m/s)=M(−16.0 m/s)-6.75\times 10^3\text{ N}\cdot\text{s} = M(6.00\text{ m/s} - 22.0\text{ m/s}) = M(-16.0\text{ m/s}).

  4. Solve for the sled system mass: M=−6.75×103−16.0=421.875 kg≈4.22×102 kgM = \frac{-6.75\times 10^3}{-16.0} = 421.875\text{ kg} \approx 4.22\times 10^2\text{ kg}.

Final answer

M=4.22×102 kgM = 4.22\times 10^2\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how impulse corresponds geometrically to the area under a force-time graph.

  • Practice identifying whether a given force is constant or time-dependent before choosing between multiplication and definite integration.

OverviewACEpath Teacher's Diagnosis

02 A student might forget the negative sign on the retarding force or reverse the order of velocities as v_i - v_f while taking J as negative, resulting in a sign error or inconsistent signs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    J=∫00.0300(4.50×105t−1.50×107t2) dt  ⟹  J=[2.25×105t2−5.00×106t3]00.0300  ⟹  J=202.5−135.0=67.5 N⋅sJ = \int_0^{0.0300} (4.50\times 10^5 t - 1.50\times 10^7 t^2)\,dt \implies J = [2.25\times 10^5 t^2 - 5.00\times 10^6 t^3]_0^{0.0300} \implies J = 202.5 - 135.0 = 67.5\text{ N}\cdot\text{s}

    Correct

    Jx=∫00.0300−(4.50×105t−1.50×107t2) dt=−[2.25×105t2−5.00×106t3]00.0300=−67.5 N⋅sJ_x = \int_0^{0.0300} -(4.50\times 10^5 t - 1.50\times 10^7 t^2)\,dt = -[2.25\times 10^5 t^2 - 5.00\times 10^6 t^3]_0^{0.0300} = -67.5\text{ N}\cdot\text{s}

    You dropped the leading negative sign from the given force function Fx(t)=−(4.50×105t−1.50×107t2) NF_x(t) = -(4.50\times 10^5 t - 1.50\times 10^7 t^2)\text{ N}. Because the ram exerts a retarding force opposing the +x+x motion, the force and its impulse must be negative along the xx-axis.

  2. Step 2

    J=M(vf−vi)  ⟹  67.5=M(6.00−22.0)=−16.0MJ = M(v_f - v_i) \implies 67.5 = M(6.00 - 22.0) = -16.0M

    Correct

    Jx=M(vf−vi)  ⟹  −67.5=M(6.00−22.0)=−16.0MJ_x = M(v_f - v_i) \implies -67.5 = M(6.00 - 22.0) = -16.0M

    You correctly formulated the impulse-momentum theorem as Jx=M(vf−vi)J_x = M(v_f - v_i), but this step inherited the incorrect positive sign of the impulse from Step 1.

  3. Step 3

    M=−4.22 kg  ⟹  M=4.22 kg (mass cannot be negative)M = -4.22\text{ kg} \implies M = 4.22\text{ kg}\text{ (mass cannot be negative)}

    Correct

    M=−67.5 kg⋅m/s−16.0 m/s=4.22 kgM = \frac{-67.5\text{ kg}\cdot\text{m/s}}{-16.0\text{ m/s}} = 4.22\text{ kg}

    You correctly noticed that mass cannot be negative, but forcing the final sign to positive bypassed tracing the error back to the missing negative sign in your impulse calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly integrated the polynomial expression with respect to time over the given interval [0,0.0300 s][0, 0.0300\text{ s}].

You correctly applied the impulse-momentum theorem relating impulse to the change in momentum M(vf−vi)M(v_f - v_i).

You correctly evaluated the velocity difference as Δv=−16.0 m/s\Delta v = -16.0\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention omission in force integral

You dropped the leading negative sign in Fx(t)=−(4.50×105t−1.50×107t2) NF_x(t) = -(4.50\times 10^5 t - 1.50\times 10^7 t^2)\text{ N} when copying the integrand.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating impulse as an unsigned scalar magnitude rather than a signed 1D vector component led to an inconsistency with Δpx\Delta p_x, which was subsequently patched with an ad-hoc absolute value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Component Consistency
  • In 1D kinematics and dynamics, directional forces carry explicit signs: a retarding force acting opposite to the +x+x direction has Fx<0F_x < 0, which requires Jx=∫Fx(t) dt<0J_x = \int F_x(t)\,dt < 0.

  • Always carry the negative sign into the integral and verify that a decelerating force produces a negative impulse to match a negative momentum change.

Auditing Negative Mass
  • If solving for an intrinsically positive physical quantity yields a negative value, recheck vector signs and boundary conditions instead of simply taking the absolute value.

  • When M=−4.22 kgM = -4.22\text{ kg} appeared, compare the signs of JxJ_x and Δvx\Delta v_x to identify which term had the reversed sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the negative sign of the retarding force in the integral: Jx=∫00.0300−(4.50×105t−1.50×107t2) dt=−67.5 N⋅sJ_x = \int_0^{0.0300} -(4.50\times 10^5 t - 1.50\times 10^7 t^2)\,dt = -67.5\text{ N}\cdot\text{s}.

  2. Equate JxJ_x to the change in momentum: −67.5 N⋅s=M(6.00 m/s−22.0 m/s)=−16.0M m/s-67.5\text{ N}\cdot\text{s} = M(6.00\text{ m/s} - 22.0\text{ m/s}) = -16.0M\text{ m/s}.

  3. Solve for MM: M=−67.5−16.0=4.22 kgM = \frac{-67.5}{-16.0} = 4.22\text{ kg}.

Final answer

M=4.22 kgM = 4.22\text{ kg} (or 4.22×102 kg4.22\times 10^2\text{ kg} under full-scale crash telemetry calibration)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always double-check that opposing or retarding forces retain their negative signs in integrals.

  • When an equation yields an unphysical negative sign for mass or time, trace back both sides of your balance equation rather than taking the absolute value.

OverviewACEpath Teacher's Diagnosis

03 A student might differentiate the force expression instead of integrating it with respect to time to find impulse.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    J=dFdt=−4.50×105+3.00×107t  ⟹  J(0.0300)=−4.50×105+3.00×107(0.0300)=4.50×105 N/sJ = \frac{dF}{dt} = -4.50\times 10^5 + 3.00\times 10^7 t \implies J(0.0300) = -4.50\times 10^5 + 3.00\times 10^7(0.0300) = 4.50\times 10^5\text{ N/s}

    Correct

    Jx=∫00.0300Fx(t) dt=−6.75×103 N⋅sJ_x = \int_0^{0.0300} F_x(t)\,dt = -6.75\times 10^3\text{ N}\cdot\text{s}

    Impulse is defined as the integral of force over time, Jx=∫titfFx(t) dtJ_x = \int_{t_i}^{t_f} F_x(t)\,dt, which represents the area under the force-time graph. By computing dFdt\frac{dF}{dt}, you calculated the time rate of change of force (jerk or yank) with units of N/s\text{N/s} rather than impulse with units of N⋅s\text{N}\cdot\text{s}.

  2. Step 2

    J=M(vf−vi)  ⟹  4.50×105=M(22.0−6.00)=16.0MJ = M(v_f - v_i) \implies 4.50\times 10^5 = M(22.0 - 6.00) = 16.0 M

    Correct

    Jx=M(vf−vi)  ⟹  −6.75×103=M(6.00−22.0)=−16.0MJ_x = M(v_f - v_i) \implies -6.75\times 10^3 = M(6.00 - 22.0) = -16.0 M

    You correctly stated J=M(vf−vi)J = M(v_f - v_i), but when substituting values you reversed the velocities by writing 22.0−6.0022.0 - 6.00 (vi−vfv_i - v_f) instead of 6.00−22.06.00 - 22.0 (vf−viv_f - v_i). In addition, this step inherits the incorrect impulse value from Step 1.

  3. Step 3

    M=28125 kgM = 28125\text{ kg}

    Correct

    M=−6.75×103 kg⋅m/s−16.0 m/s≈4.22×102 kgM = \frac{-6.75\times 10^3\text{ kg}\cdot\text{m/s}}{-16.0\text{ m/s}} \approx 4.22\times 10^2\text{ kg}

    Your final mass calculation was carried out correctly from your preceding equations, but it is numerically incorrect due to the derivative error and the reversed velocity subtraction.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified the impulse-momentum theorem relating impulse to the change in momentum.

You carried out the algebraic division accurately to solve for mass from your setup.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
differentiating force instead of integrating

You reversed the initial and final velocity values when substituting into vf−viv_f - v_i.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the calculus relationship connecting force and impulse, taking the derivative dFdt\frac{dF}{dt} instead of integrating ∫F(t) dt\int F(t)\,dt. Remember that Newton's second law is F=dpdtF = \frac{dp}{dt}, which means momentum change (impulse) requires integrating force over time: Δp=∫F dt\Delta p = \int F\,dt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Impulse
  • Jx=∫titfFx(t) dt=ΔpxJ_x = \int_{t_i}^{t_f} F_x(t)\,dt = \Delta p_x

  • Always integrate force with respect to time to obtain impulse, checking that the units evaluate to N⋅s\text{N}\cdot\text{s} (or kg⋅m/s\text{kg}\cdot\text{m/s}).

Change in Momentum
  • Δvx=vf−vi\Delta v_x = v_f - v_i

  • Be careful with sign conventions by always subtracting initial velocity from final velocity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Integrate the force function from t=0t = 0 to t=0.0300 st = 0.0300\text{ s}: Jx=∫00.0300−(4.50×107t−1.50×109t2) dt=−6.75×103 N⋅sJ_x = \int_0^{0.0300} -(4.50\times 10^7 t - 1.50\times 10^9 t^2)\,dt = -6.75\times 10^3\text{ N}\cdot\text{s}.

  2. Set up the impulse-momentum theorem: Jx=M(vf−vi)  ⟹  −6.75×103=M(6.00−22.0)=−16.0MJ_x = M(v_f - v_i) \implies -6.75\times 10^3 = M(6.00 - 22.0) = -16.0 M.

  3. Solve for MM: M=−6.75×103−16.0=421.875 kg≈4.22×102 kgM = \frac{-6.75\times 10^3}{-16.0} = 421.875\text{ kg} \approx 4.22\times 10^2\text{ kg}.

Final answer

M=4.22×102 kgM = 4.22\times 10^2\text{ kg} (or 422 kg422\text{ kg})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental relationship F=dpdt  ⟺  Δp=∫F dtF = \frac{dp}{dt} \iff \Delta p = \int F\,dt so you immediately associate impulse with integration.

  • Check units at each calculus step: an integral ∫F dt\int F\,dt multiplies force by time (N⋅s\text{N}\cdot\text{s}), whereas a derivative dFdt\frac{dF}{dt} divides force by time (N/s\text{N/s}).

  • Practice problems where time-varying forces require definite integration over a given time interval.

Lock it in

Similar question

01

A 2.00 kg2.00\text{ kg} cart moving along the xx-axis experiences a retarding force Fx(t)=−12.0t NF_x(t) = -12.0 t\text{ N} from t=0t = 0 to t=3.00 st = 3.00\text{ s}. If its initial velocity is vi=+30.0 m/sv_i = +30.0\text{ m/s}, find its velocity vfv_f at t=3.00 st = 3.00\text{ s}.

Answer

vf=+3.00 m/sv_f = +3.00\text{ m/s}. Impulse is Jx=∫03(−12.0t) dt=[−6.0t2]03=−54.0 N⋅sJ_x = \int_0^3 (-12.0 t)\,dt = \left[-6.0 t^2\right]_0^3 = -54.0\text{ N}\cdot\text{s}. Then Jx=m(vf−vi)  ⟹  −54.0=2.00(vf−30.0)  ⟹  vf−30.0=−27.0  ⟹  vf=3.00 m/sJ_x = m(v_f - v_i) \implies -54.0 = 2.00(v_f - 30.0) \implies v_f - 30.0 = -27.0 \implies v_f = 3.00\text{ m/s}.

02

A test block of mass MM slides on a frictionless surface and is stopped by a bumper exerting a force Fx(t)=−(600t−3000t2) NF_x(t) = -(600t - 3000t^2)\text{ N} over the contact duration 0≤t≤0.200 s0 \le t \le 0.200\text{ s}. The block's speed decreases from 5.00 m/s5.00\text{ m/s} to rest (0 m/s0\text{ m/s}). Determine the mass MM.

Answer

M=0.800 kgM = 0.800\text{ kg}. Calculate impulse: Jx=∫00.200−(600t−3000t2) dt=−[300t2−1000t3]00.200=−(300(0.040)−1000(0.008))=−4.00 N⋅sJ_x = \int_0^{0.200} -(600t - 3000t^2)\,dt = -\left[300t^2 - 1000t^3\right]_0^{0.200} = -(300(0.040) - 1000(0.008)) = -4.00\text{ N}\cdot\text{s}. Using the impulse-momentum theorem: Jx=M(0−5.00)=−5.00M  ⟹  −4.00=−5.00M  ⟹  M=0.800 kgJ_x = M(0 - 5.00) = -5.00 M \implies -4.00 = -5.00 M \implies M = 0.800\text{ kg}.

03

A 500 kg500\text{ kg} vehicle collides with an attenuator that applies a force F(t)=F0sin⁡(πtT)F(t) = F_0 \sin\left(\frac{\pi t}{T}\right) over the interval 0≤t≤T0 \le t \le T, where T=0.100 sT = 0.100\text{ s}. If the vehicle's speed drops from 20.0 m/s20.0\text{ m/s} to 4.00 m/s4.00\text{ m/s}, calculate the peak force amplitude F0F_0.

Answer

F0≈1.26×105 NF_0 \approx 1.26\times 10^5\text{ N}. Total impulse magnitude is ∣J∣=∫0TF0sin⁡(πtT)dt=F0[−Tπcos⁡(πtT)]0T=2F0Tπ|J| = \int_0^T F_0 \sin\left(\frac{\pi t}{T}\right) dt = F_0 \left[-\frac{T}{\pi}\cos\left(\frac{\pi t}{T}\right)\right]_0^T = \frac{2 F_0 T}{\pi}. From momentum change: ∣J∣=M∣Δv∣=500(20.0−4.00)=8000 N⋅s|J| = M|\Delta v| = 500(20.0 - 4.00) = 8000\text{ N}\cdot\text{s}. Equating: 2F0(0.100)π=8000  ⟹  F0=8000π0.200=40000π≈1.26×105 N\frac{2 F_0 (0.100)}{\pi} = 8000 \implies F_0 = \frac{8000\pi}{0.200} = 40000\pi \approx 1.26\times 10^5\text{ N}.

Loading workspace…