Resources
A light horizontal spring of spring constant is attached to a block of mass resting on a frictionless table. A small pellet of mass traveling horizontally at along the axis of the spring impacts and instantly embeds into the block while the spring is at its uncompressed equilibrium length. (a) Derive an expression for the resulting oscillation amplitude as a function of , , , and . (b) Evaluate the asymptotic limit of the amplitude . (c) Calculate the exact amplitude in meters when , and compute the percentage error in amplitude if an analyst uses the extreme perturbation approximation in the kinetic energy step immediately following collision.
Answer and steps
Final answer
(a) ; (b) ; (c) (exact), percentage error =
Steps
Part (a): Deriving the Oscillation Amplitude
The process occurs in two distinct physical stages: a completely inelastic collision, followed by simple harmonic motion (SHM).
-
Stage 1: Completely Inelastic Collision Because the collision is nearly instantaneous, external horizontal forces (such as the spring force) exert negligible impulse during the impact. Thus, linear momentum is conserved along the horizontal axis: where is the common speed of the block and embedded pellet immediately after impact:
Common Pitfall: Mechanical energy is not conserved during the impact due to internal deformation and heat generation. Do not equate directly to spring potential energy.
-
Stage 2: Simple Harmonic Motion After the collision, the combined mass begins to compress the spring from its uncompressed equilibrium position. The surface is frictionless, so mechanical energy is conserved from the moment of impact until the system reaches its maximum compression (amplitude , where the velocity is momentarily zero):
Solving for :
Substitute the expression for :
Part (b): Asymptotic Limit as
Taking the limit as the mass of the pellet approaches zero:
Physical interpretation: A pellet of negligible mass carries zero momentum into the stationary block, resulting in zero initial kinetic energy and therefore zero oscillation amplitude.
Part (c): Exact Amplitude and Approximation Error
-
Exact Amplitude Calculation Given:
Compute the total mass and initial momentum:
Substitute these into the amplitude formula:
- Approximation with If an analyst neglects relative to in the denominator:
- Percentage Error
Typical errors
01 The student assumes mechanical energy is conserved during the collision rather than using conservation of linear momentum.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
; then
You equated the initial kinetic energy of the incoming pellet directly to the maximum elastic potential energy of the spring. Because the pellet embeds permanently into the block, this is a completely inelastic collision. Kinetic energy is not conserved during the impact; you must conserve linear momentum during the collision to find the initial speed of the combined mass, and then apply conservation of mechanical energy to the spring compression.
- Step 2Correct
Your mathematical limit operation is correct for your derived formula, but the expression itself was missing the target block mass from Step 1.
- Step 3Correct
Your arithmetic evaluation followed your formula accurately, but the numerical result is inflated because energy loss during the collision was omitted.
- Step 4Correct
Because your amplitude expression did not contain the block mass , the approximation had no effect in your working.
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that the system achieves maximum compression at amplitude where kinetic energy transforms into spring potential energy.
You evaluated the limit as correctly based on your algebraic formula.
You performed clean, organized numerical calculations with appropriate units.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated an embedding impact as an elastic process by equating initial and final mechanical energy across the collision, overlooking that macroscopic kinetic energy is dissipated into internal thermal energy and deformation during a completely inelastic collision.
REASONING PATH
Your ACEpath teacher’s suggested approach- Separate Impact from Oscillation
During an instant collision, external spring forces exert negligible impulse, so linear momentum is conserved: . Mechanical energy is not conserved when objects deform or stick together.
Always find the post-collision speed using momentum conservation first, then use mechanical energy conservation for the subsequent motion.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply conservation of linear momentum during the instant impact: .
Apply conservation of mechanical energy after the impact: .
Evaluate the limit: .
Calculate exact : with , .
Calculate approximate : with , .
Compute percentage error: .
(a) ; (b) ; (c) , percentage error =
02 The student forgets to include the mass of the embedded pellet in the total mass during the post-collision oscillation phase.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
In a completely inelastic collision where the projectile embeds into the target, the mass of the moving system immediately after impact is the combined mass .
- Step 2Correct
The mass oscillating on the spring after impact includes both the block and the embedded pellet, so the initial kinetic energy is .
- Step 3Correct
You correctly evaluated the limit of your expression as , which yields the correct physical limit of , though it was based on your uncorrected formula.
- Step 4Correct
Your calculation evaluated the approximation rather than the exact amplitude because was missing from the total mass.
- Step 5Correct
Because you used the approximation from the beginning, your exact and approximate expressions coincided, obscuring the true discrepancy.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that horizontal linear momentum is conserved during the instantaneous collision.
You correctly set up mechanical energy conservation between the post-impact kinetic energy and the maximum spring potential energy.
You evaluated the asymptotic limit as accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou neglected the mass of the embedded projectile when defining the total system mass after an inelastic collision, treating the post-impact mass as rather than .
REASONING PATH
Your ACEpath teacher’s suggested approach- Post-Collision System Mass
Whenever an object embeds into another, the new total inertia is .
Write down explicitly before setting up both the momentum and kinetic energy equations.
- Exact vs. Perturbation Check
An approximation such as should only be introduced when explicitly requested, never in the foundational derivation.
Keep all mass terms exact throughout the derivation so you can compare exact and approximate values.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply momentum conservation with the combined mass: .
Apply energy conservation with the combined mass: .
Evaluate the exact amplitude: .
Compare with : .
(a) ; (b) ; (c) , percentage error =
03 The student computes the percentage error relative to the approximate value rather than the exact reference value.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You placed the approximate value in the denominator. Percentage error must always be normalized by the true reference value ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the two physical stages: momentum conservation during collision and energy conservation during oscillation.
You accurately carried out the limit as the pellet mass approaches zero.
You calculated both the exact amplitude and the perturbed approximation with high arithmetic precision.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally placed the approximate amplitude in the denominator of the percentage error expression rather than the exact value .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the reference base in relative error definitions: relative error is defined with respect to the true or exact accepted baseline, not the newly estimated or approximate value.
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Base in Relative Error
Always verify that the true or exact value is in the denominator before multiplying by .
CORRECTED PATH
ACEpath Teacher's Demonstration, percentage error =
Lock it in
An object collides with and sticks to another object attached to a spring. Which conservation law applies during the instant of impact?
Conservation of linear momentum (). Mechanical energy is never conserved during a completely inelastic impact.
Similar question
A dart of mass moving horizontally at embeds into a stationary wooden block of mass resting on a frictionless surface and attached to a horizontal spring (). Find the resulting amplitude of oscillation.
Answer
. Key steps: Momentum conservation gives . Energy conservation after collision gives .
In the same setup (, , ), how much mechanical energy was converted into thermal energy/deformation during the impact?
Answer
. Key steps: Initial kinetic energy . Kinetic energy right after collision . Energy lost (a loss).
A block of mass connected to a horizontal spring with constant is struck by a bullet of mass at speed . If the collision were perfectly elastic (the bullet bounces back with speed ) instead of inelastic, how would you determine the post-collision speed of the block needed to find the amplitude?
Answer
Solve the system of two simultaneous conservation equations: (1) Momentum: ; (2) Mechanical energy during collision: . This yields , after which determines .