Resources
A rigid planar bracket lies in the -plane and is free to rotate about a fixed axle perpendicular to the plane at the origin . A force is applied to the bracket at the position . Using the standard vector cross-product definition , calculate the vector torque acting on the bracket about the origin.
Answer and steps
Final answer
Steps
State the Torque Formula
The torque vector about the origin produced by a force applied at position is defined by the cross product:
For two-dimensional vectors lying entirely in the -plane, and . The resulting torque points along the perpendicular -axis ( direction):
Substitute the Given Vector Components
From the problem statement:
Calculate the individual cross-product terms:
Compute the Net Vector Torque
Subtract the two terms to find the -component:
Therefore:
Physical Insight and Pitfall Check
- Geometric Meaning: Notice that . Because is directly antiparallel to , the angle between them is . Since , the line of action passes directly through the origin (the axis of rotation). With zero moment arm, the applied force produces no rotational tendency.
- Common Pitfall: Watch signs carefully when evaluating . Multiplying two negative components, , yields positive , which correctly subtracts from the from . An error in tracking double negatives often leads to an incorrect value of .
Typical errors
01 The student reverses the cross product order by computing F × r instead of r × F and makes a sign error on the subtracted term, concluding τ = 24.0k N·m.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Torque is defined by the cross product taken in the specific order . Because vector cross products are anticommutative (), reversing the order inverts the sign of the resulting torque vector.
- Step 2Correct
You correctly applied the determinant structure for your chosen order, but the components are swapped due to the reversed vector order in Step 1.
- Step 3Correct
You changed the subtraction of into addition, writing instead of . Even with your reversed setup, evaluates to .
WHAT YOU DID WELL
Compliments from Your TeacherYou identified that the cross product of two vectors in the -plane produces a torque oriented entirely along the axis.
You calculated the product pairs and accurately before combining them.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally replaced the minus sign in with a plus sign, summing the two terms instead of subtracting them.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated torque as an unordered product rather than the strictly ordered , and you overlooked that the determinant cross-product formula requires subtracting the second component product.
REASONING PATH
Your ACEpath teacher’s suggested approach- Cross-Product Order
Vector cross products are anticommutative: . Torque is always position crossed into force: .
Always write the position vector first and the force vector second in both symbolic notation and component determinants.
- Preserve Determinant Subtraction
For planar vectors, . The minus sign between the terms is built into the formula.
Evaluate and independently in parentheses, keeping the operational minus sign between them intact before simplifying signs.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the standard torque definition with position first: .
Substitute the components: .
Expand the determinant: .
Compute the products: .
02 The student confuses the formula for the z-component of the cross product by adding the product of components instead of subtracting them.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The -component of a 2D cross product is defined by the determinant expansion as , not .
- Step 2Correct
You correctly substituted the coordinates and evaluated the component products and , but the step is affected by adding the two terms instead of subtracting them.
- Step 3Correct
Evaluating yields zero net torque because the position vector and applied force vector are collinear.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly extracted the coordinates , , , and .
You accurately computed the numerical products and tracked the double-negative sign in .
You included the correct unit and unit vector in your final expression.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote a plus sign between the two diagonal products and instead of subtracting them.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisremembering the determinant expansion for the cross product , possibly conflating it with the scalar dot product formula .
REASONING PATH
Your ACEpath teacher’s suggested approach- 2D Cross Product Determinant
For vectors in the -plane, .
Always write out the subtraction sign between the main diagonal product and the off-diagonal product before substituting numerical values.
- Collinearity Check
If for some scalar , the vectors are parallel or antiparallel, meaning the line of action passes through the pivot and net torque must be zero.
Check whether the ratio equals ; here, , confirming .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the standard determinant definition for the cross product: .
Substitute the values with careful sign tracking: .
Simplify the products inside the brackets: .
03 The student misidentifies the terms in the cross product formula as x*Fx - y*Fy, multiplying like components together.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The cross product of vectors in the -plane requires pairing perpendicular unit vectors (since and , while and ). Therefore, the -component must be , not .
- Step 2Correct
Your arithmetic evaluation was correct for the formula you wrote down, but the substituted terms inherited the paired-component error from Step 1.
- Step 3Correct
Evaluating the correct expression gives .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly extracted the numerical components and signs for both the position vector and the force vector.
You handled the double-negative arithmetic carefully in your expanded calculation.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou paired like components ( with , with ) instead of cross components ( with , with ), confusing the cross-product expansion with an altered dot-product structure.
REASONING PATH
Your ACEpath teacher’s suggested approach- Cross Product Determinant Expansion
For 2D vectors and , the cross product is given by the determinant .
Always pair each position component with the perpendicular force component: multiplies , and multiplies .
- Parallel/Antiparallel Vectors Geometric Check
If is a scalar multiple of (here ), the force points directly toward or away from the pivot, yielding .
Check whether the force points through the origin before computing: collinear vectors always produce zero torque.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the standard cross-product component formula: .
Substitute the given coordinates and force components: , , , .
Compute the product terms: and .
Subtract the terms: .
Lock it in
What is the correct vector definition of torque in terms of position and force , and can you reverse the order of the vectors?
. You cannot reverse the order because the cross product is anticommutative: .
Similar question
A force is applied at position . Using , find the vector torque about the origin.
Answer
. Key step: .
A force acts at position . Calculate the vector torque acting on the object about the origin.
Answer
. Key steps: , so .
A force acts at . Determine the torque vector about the origin and explain the physical reason for the numerical outcome.
Answer
. Key steps: . Physically, , so the force is antiparallel to and its line of action passes directly through the pivot, producing zero lever arm.