Resources

Two harmonic oscillators PP and QQ have identical amplitudes A=0.100 mA = 0.100\text{ m} and identical frequencies f=2.00 Hzf = 2.00\text{ Hz}. At t=0 st = 0\text{ s}, oscillator PP passes through the equilibrium position moving in the positive direction (xP=0x_P = 0, vP>0v_P > 0), while oscillator QQ is at its maximum positive displacement (xQ=+Ax_Q = +A, vQ=0v_Q = 0). A student asserts that because oscillator QQ is at maximum displacement while PP is at zero, QQ must lead PP in phase by a full quarter cycle (+π2 rad+\frac{\pi}{2}\text{ rad}). Analyze the phase relationship to determine: (a) the phase angle of each oscillator at t=0 st = 0\text{ s} when written as x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0), and (b) whether oscillator PP actually leads or lags oscillator QQ, specifying the correct signed phase difference ϕP−ϕQ\phi_P - \phi_Q within [−π,π][-\pi, \pi].

Answer and steps

Final answer

(a) ϕP=−π2 rad\phi_P = -\frac{\pi}{2}\text{ rad}, ϕQ=0 rad\phi_Q = 0\text{ rad}; (b) ϕP−ϕQ=−π2 rad\phi_P - \phi_Q = -\frac{\pi}{2}\text{ rad}, meaning oscillator PP lags oscillator QQ by π2 rad\frac{\pi}{2}\text{ rad} (or equivalently, QQ leads PP by +π2 rad+\frac{\pi}{2}\text{ rad}, reaching corresponding states a quarter-period earlier).

Steps

01

General Equation and Velocity Function

A simple harmonic oscillator can be modeled by: x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0)

Differentiating with respect to time gives the velocity: v(t)=dxdt=−Aωsin⁡(ωt+ϕ0)v(t) = \frac{dx}{dt} = -A\omega\sin(\omega t + \phi_0)

Here, the angular frequency is ω=2πf=2π(2.00 Hz)=4π rad/s\omega = 2\pi f = 2\pi(2.00\text{ Hz}) = 4\pi\text{ rad/s}, and the amplitude is A=0.100 mA = 0.100\text{ m}.


02

Determine the Initial Phase Angle for Oscillator QQ

At t=0 st = 0\text{ s}, oscillator QQ is at maximum positive displacement: xQ(0)=Acos⁡(ϕQ)=+A  ⟹  cos⁡(ϕQ)=1x_Q(0) = A\cos(\phi_Q) = +A \implies \cos(\phi_Q) = 1

Within the standard principal range [−π,π][-\pi, \pi]: ϕQ=0 rad\phi_Q = 0\text{ rad}

Checking the velocity: vQ(0)=−Aωsin⁡(0)=0 m/sv_Q(0) = -A\omega\sin(0) = 0\text{ m/s} This matches the given condition that vQ=0v_Q = 0.


03

Determine the Initial Phase Angle for Oscillator PP

At t=0 st = 0\text{ s}, oscillator PP passes through the equilibrium position: xP(0)=Acos⁡(ϕP)=0  ⟹  ϕP=±π2 radx_P(0) = A\cos(\phi_P) = 0 \implies \phi_P = \pm\frac{\pi}{2}\text{ rad}

Oscillator PP moves in the positive direction at t=0 st = 0\text{ s} (vP(0)>0v_P(0) > 0): vP(0)=−Aωsin⁡(ϕP)>0  ⟹  sin⁡(ϕP)<0v_P(0) = -A\omega\sin(\phi_P) > 0 \implies \sin(\phi_P) < 0

Choosing the value where the sine is negative: ϕP=−π2 rad\phi_P = -\frac{\pi}{2}\text{ rad}

(Pitfall note: choosing +π2 rad+\frac{\pi}{2}\text{ rad} would yield vP(0)=−Aω<0v_P(0) = -A\omega < 0, which corresponds to moving in the negative direction through equilibrium).


04

Phase Difference and Lead/Lag Relationship

The signed phase difference of PP relative to QQ is: Δϕ=ϕP−ϕQ=−π2 rad−0 rad=−π2 rad\Delta\phi = \phi_P - \phi_Q = -\frac{\pi}{2}\text{ rad} - 0\text{ rad} = -\frac{\pi}{2}\text{ rad}

  • Because ϕP<ϕQ\phi_P < \phi_Q, oscillator PP lags oscillator QQ by π2 rad\frac{\pi}{2}\text{ rad} (or a quarter period, Δt=T4\Delta t = \frac{T}{4}).
  • Equivalently, oscillator QQ leads oscillator PP by +π2 rad+\frac{\pi}{2}\text{ rad}, meaning QQ reaches any given phase (such as maximum positive displacement) earlier in time than PP.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the velocity sign condition for oscillator P and chooses φ_P = +π/2 rad, concluding that P leads Q by +π/2 rad.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xP(0)=Acos⁡(ϕP)=0  ⟹  cos⁡(ϕP)=0  ⟹  ϕP=π2 radx_P(0) = A\cos(\phi_P) = 0 \implies \cos(\phi_P) = 0 \implies \phi_P = \frac{\pi}{2}\text{ rad}

    Correct

    xP(0)=Acos⁡(ϕP)=0 and vP(0)=−Aωsin⁡(ϕP)>0  ⟹  ϕP=−π2 radx_P(0) = A\cos(\phi_P) = 0 \text{ and } v_P(0) = -A\omega\sin(\phi_P) > 0 \implies \phi_P = -\frac{\pi}{2}\text{ rad}

    Setting xP(0)=Acos⁡(ϕP)=0x_P(0) = A\cos(\phi_P) = 0 yields two possible angles in [−π,π][-\pi, \pi]: ϕP=+π2 rad\phi_P = +\frac{\pi}{2}\text{ rad} or ϕP=−π2 rad\phi_P = -\frac{\pi}{2}\text{ rad}. Because the velocity is vP(t)=−Aωsin⁡(ωt+ϕP)v_P(t) = -A\omega\sin(\omega t + \phi_P), the condition vP(0)>0v_P(0) > 0 requires −Aωsin⁡(ϕP)>0-A\omega\sin(\phi_P) > 0, so sin⁡(ϕP)<0\sin(\phi_P) < 0. This selects ϕP=−π2 rad\phi_P = -\frac{\pi}{2}\text{ rad}.

  2. Step 2

    xQ(0)=Acos⁡(ϕQ)=A  ⟹  cos⁡(ϕQ)=1  ⟹  ϕQ=0 radx_Q(0) = A\cos(\phi_Q) = A \implies \cos(\phi_Q) = 1 \implies \phi_Q = 0\text{ rad}

  3. Step 3

    ϕP−ϕQ=π2−0=π2 rad  ⟹  Oscillator P leads oscillator Q by π2 rad\phi_P - \phi_Q = \frac{\pi}{2} - 0 = \frac{\pi}{2}\text{ rad} \implies \text{Oscillator } P \text{ leads oscillator } Q \text{ by } \frac{\pi}{2}\text{ rad}

    Correct

    ϕP−ϕQ=−π2−0=−π2 rad  ⟹  Oscillator P lags oscillator Q by π2 rad (or Q leads P)\phi_P - \phi_Q = -\frac{\pi}{2} - 0 = -\frac{\pi}{2}\text{ rad} \implies \text{Oscillator } P \text{ lags oscillator } Q \text{ by } \frac{\pi}{2}\text{ rad (or } Q \text{ leads } P)

    Your subtraction step and lead/lag deduction were mathematically consistent with your earlier value of ϕP\phi_P, but they inherited the incorrect sign from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed displacement in terms of the cosine function at t=0 st = 0\text{ s}.

You correctly solved for the initial phase angle of oscillator QQ as ϕQ=0 rad\phi_Q = 0\text{ rad}.

You understood how to compute the phase difference ϕP−ϕQ\phi_P - \phi_Q to interpret the lead/lag relationship.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of velocity direction when resolving initial phase ambiguity

false

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You solved cos⁡(ϕ)=0\cos(\phi) = 0 considering only displacement, overlooking that the cosine function is ambiguous between positive and negative angles within [−π,π][-\pi, \pi]. You need the sign of velocity, v(0)=−Aωsin⁡(ϕ0)v(0) = -A\omega\sin(\phi_0), to select the correct branch.

REASONING PATH
Your ACEpath teacher’s suggested approach
Displacement gives magnitude of phase, velocity gives direction
  • For x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0), the velocity is v(t)=−Aωsin⁡(ωt+ϕ0)v(t) = -A\omega\sin(\omega t + \phi_0). A single displacement value x(0)x(0) usually permits two phase angles with opposite signs of sin⁡(ϕ0)\sin(\phi_0).

  • Always evaluate both x(0)=Acos⁡(ϕ0)x(0) = A\cos(\phi_0) and the sign of v(0)=−Aωsin⁡(ϕ0)v(0) = -A\omega\sin(\phi_0) before choosing ϕ0\phi_0.

Interpreting lead vs. lag
  • If ϕP−ϕQ<0\phi_P - \phi_Q < 0, oscillator PP lags oscillator QQ. If ϕP−ϕQ>0\phi_P - \phi_Q > 0, oscillator PP leads oscillator QQ.

  • Check that the oscillator with the larger phase angle reaches each displacement state earlier in time.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the initial position condition: xP(0)=Acos⁡(ϕP)=0  ⟹  ϕP=±π2 radx_P(0) = A\cos(\phi_P) = 0 \implies \phi_P = \pm\frac{\pi}{2}\text{ rad}.

  2. Apply the initial velocity condition: vP(0)=−Aωsin⁡(ϕP)>0  ⟹  sin⁡(ϕP)<0v_P(0) = -A\omega\sin(\phi_P) > 0 \implies \sin(\phi_P) < 0.

  3. Select the angle with negative sine: ϕP=−π2 rad\phi_P = -\frac{\pi}{2}\text{ rad}.

  4. Combine with ϕQ=0 rad\phi_Q = 0\text{ rad} to find the signed phase difference: ϕP−ϕQ=−π2−0=−π2 rad\phi_P - \phi_Q = -\frac{\pi}{2} - 0 = -\frac{\pi}{2}\text{ rad}.

  5. Conclude that oscillator PP lags oscillator QQ by π2 rad\frac{\pi}{2}\text{ rad} (or equivalently, oscillator QQ leads oscillator PP by π2 rad\frac{\pi}{2}\text{ rad}).

Final answer

(a) ϕP=−π2 rad\phi_P = -\frac{\pi}{2}\text{ rad}, ϕQ=0 rad\phi_Q = 0\text{ rad}; (b) ϕP−ϕQ=−π2 rad\phi_P - \phi_Q = -\frac{\pi}{2}\text{ rad}, so oscillator PP lags oscillator QQ by π2 rad\frac{\pi}{2}\text{ rad}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out both x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0) and v(t)=−Aωsin⁡(ωt+ϕ0)v(t) = -A\omega\sin(\omega t + \phi_0) whenever you determine an initial phase constant.

  • Practice drawing reference circles (phasor diagrams) where moving in the +x+x direction corresponds to the lower half-circle (−π<ϕ<0-\pi < \phi < 0).

OverviewACEpath Teacher's Diagnosis

02 The student reverses the order of subtraction when computing the signed phase difference, evaluating φ_Q - φ_P instead of φ_P - φ_Q.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xP(0)=Acos⁡(ϕP)=0 and vP(0)>0  ⟹  ϕP=−π2 radx_P(0) = A\cos(\phi_P) = 0 \text{ and } v_P(0) > 0 \implies \phi_P = -\frac{\pi}{2}\text{ rad}

  2. Step 2

    xQ(0)=Acos⁡(ϕQ)=A and vQ(0)=0  ⟹  ϕQ=0 radx_Q(0) = A\cos(\phi_Q) = A \text{ and } v_Q(0) = 0 \implies \phi_Q = 0\text{ rad}

  3. Step 3

    ϕP−ϕQ=0−(−π2)=π2 rad\phi_P - \phi_Q = 0 - \left(-\frac{\pi}{2}\right) = \frac{\pi}{2}\text{ rad}

    Correct

    ϕP−ϕQ=−π2−0=−π2 rad\phi_P - \phi_Q = -\frac{\pi}{2} - 0 = -\frac{\pi}{2}\text{ rad}

    You swapped the values of ϕP\phi_P and ϕQ\phi_Q during substitution, calculating ϕQ−ϕP\phi_Q - \phi_P instead of ϕP−ϕQ\phi_P - \phi_Q.

  4. Step 4

    Oscillator P leads oscillator Q by π2 rad\text{Oscillator } P \text{ leads oscillator } Q \text{ by } \frac{\pi}{2}\text{ rad}

    Correct

    Oscillator P lags oscillator Q by π2 rad (or Q leads P by π2 rad)\text{Oscillator } P \text{ lags oscillator } Q \text{ by } \frac{\pi}{2}\text{ rad (or } Q \text{ leads } P \text{ by } \frac{\pi}{2}\text{ rad)}

    Because your signed phase difference had the incorrect positive sign, you concluded that PP leads QQ rather than lagging QQ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the cosine displacement relation for both oscillators at t=0 st = 0\text{ s}.

You applied the velocity sign test accurately to pick ϕP=−π2 rad\phi_P = -\frac{\pi}{2}\text{ rad} rather than +π2 rad+\frac{\pi}{2}\text{ rad}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Order of Subtraction in Relative Phase

You accidentally reversed the positions of ϕP\phi_P and ϕQ\phi_Q when substituting into ϕP−ϕQ\phi_P - \phi_Q.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A mechanical variable-substitution reversal led you to compute ϕQ−ϕP\phi_Q - \phi_P instead of ϕP−ϕQ\phi_P - \phi_Q, flipping the algebraic sign and inverting the physical lead/lag interpretation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Variable Alignment Check
  • For any relative difference Δϕ=ϕA−ϕB\Delta \phi = \phi_A - \phi_B, place the value of ϕA\phi_A first and ϕB\phi_B second.

  • Write out the labeled substitution explicitly: ϕP−ϕQ=(−π/2)−(0)=−π/2 rad\phi_P - \phi_Q = (-\pi/2) - (0) = -\pi/2\text{ rad}.

Physical Reality Check
  • An oscillator at +A+A has already peaked, while an oscillator at x=0x = 0 moving positive will not reach +A+A until a quarter-cycle later.

  • Verify that the oscillator that reaches the positive peak earlier in time is the one that leads.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the established values directly in the required order: ϕP=−π2 rad\phi_P = -\frac{\pi}{2}\text{ rad} and ϕQ=0 rad\phi_Q = 0\text{ rad}.

  2. Compute ϕP−ϕQ=−π2−0=−π2 rad\phi_P - \phi_Q = -\frac{\pi}{2} - 0 = -\frac{\pi}{2}\text{ rad}.

  3. Since ϕP−ϕQ<0\phi_P - \phi_Q < 0, conclude that oscillator PP lags oscillator QQ by π2 rad\frac{\pi}{2}\text{ rad} (or oscillator QQ leads oscillator PP by π2 rad\frac{\pi}{2}\text{ rad}).

Final answer

(a) ϕP=−π2 rad\phi_P = -\frac{\pi}{2}\text{ rad}, ϕQ=0 rad\phi_Q = 0\text{ rad}; (b) ϕP−ϕQ=−π2 rad\phi_P - \phi_Q = -\frac{\pi}{2}\text{ rad}, so oscillator PP lags oscillator QQ by π2 rad\frac{\pi}{2}\text{ rad}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the minuend and subtrahend match your written formula labels before computing.

  • Compare the mathematical sign of Δϕ\Delta \phi against a mental timeline of which oscillator peaks first.

Lock it in

Similar question

01

A simple harmonic oscillator has position x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0). At t=0 st = 0\text{ s}, it passes through equilibrium moving in the negative direction (x=0x = 0, v<0v < 0). Determine its initial phase ϕ0∈[−π,π]\phi_0 \in [-\pi, \pi].

Answer

ϕ0=+π2 rad\phi_0 = +\frac{\pi}{2}\text{ rad}. Steps: x(0)=Acos⁡(ϕ0)=0  ⟹  ϕ0=±π2 radx(0) = A\cos(\phi_0) = 0 \implies \phi_0 = \pm\frac{\pi}{2}\text{ rad}. The velocity is v(0)=−Aωsin⁡(ϕ0)<0v(0) = -A\omega\sin(\phi_0) < 0, which requires sin⁡(ϕ0)>0\sin(\phi_0) > 0. Therefore, ϕ0=+π2 rad\phi_0 = +\frac{\pi}{2}\text{ rad}.

02

An oscillator described by x(t)=Acos⁡(ωt+ϕ0)x(t) = A\cos(\omega t + \phi_0) starts at x(0)=−22Ax(0) = -\frac{\sqrt{2}}{2}A with positive velocity v(0)>0v(0) > 0. Find ϕ0∈[−π,π]\phi_0 \in [-\pi, \pi].

Answer

ϕ0=−3π4 rad\phi_0 = -\frac{3\pi}{4}\text{ rad}. Steps: cos⁡(ϕ0)=−22  ⟹  ϕ0=±3π4 rad\cos(\phi_0) = -\frac{\sqrt{2}}{2} \implies \phi_0 = \pm\frac{3\pi}{4}\text{ rad}. The velocity condition v(0)=−Aωsin⁡(ϕ0)>0v(0) = -A\omega\sin(\phi_0) > 0 requires sin⁡(ϕ0)<0\sin(\phi_0) < 0. Choosing the negative sine yields ϕ0=−3π4 rad\phi_0 = -\frac{3\pi}{4}\text{ rad}.

03

Two oscillators 11 and 22 have identical frequencies. At t=0t = 0, oscillator 11 is at x1(0)=+12Ax_1(0) = +\frac{1}{2}A moving in the negative direction (v1<0v_1 < 0), while oscillator 22 is at x2(0)=+12Ax_2(0) = +\frac{1}{2}A moving in the positive direction (v2>0v_2 > 0). Find ϕ1\phi_1, ϕ2\phi_2, and the phase difference ϕ1−ϕ2∈[−π,π]\phi_1 - \phi_2 \in [-\pi, \pi]. Which oscillator leads?

Answer

ϕ1=+π3 rad\phi_1 = +\frac{\pi}{3}\text{ rad}, ϕ2=−π3 rad\phi_2 = -\frac{\pi}{3}\text{ rad}, and ϕ1−ϕ2=+2π3 rad\phi_1 - \phi_2 = +\frac{2\pi}{3}\text{ rad}; oscillator 11 leads oscillator 22. Steps:

  1. cos⁡(ϕ)=12  ⟹  ϕ=±π3 rad\cos(\phi) = \frac{1}{2} \implies \phi = \pm\frac{\pi}{3}\text{ rad}.
  2. For oscillator 11, v1<0  ⟹  sin⁡(ϕ1)>0  ⟹  ϕ1=+π3 radv_1 < 0 \implies \sin(\phi_1) > 0 \implies \phi_1 = +\frac{\pi}{3}\text{ rad}.
  3. For oscillator 22, v2>0  ⟹  sin⁡(ϕ2)<0  ⟹  ϕ2=−π3 radv_2 > 0 \implies \sin(\phi_2) < 0 \implies \phi_2 = -\frac{\pi}{3}\text{ rad}.
  4. ϕ1−ϕ2=π3−(−π3)=+2π3 rad>0\phi_1 - \phi_2 = \frac{\pi}{3} - (-\frac{\pi}{3}) = +\frac{2\pi}{3}\text{ rad} > 0, so oscillator 11 leads oscillator 22 by 2π3 rad\frac{2\pi}{3}\text{ rad}.
Loading workspace…