Resources

Two identical positive charges +q+q are fixed along the xx-axis at x=−ax = -a and x=+ax = +a. A student predicts that moving away from the origin along the perpendicular bisector (+y+y-axis) will monotonically decrease the electric-field strength from its value at the origin. (a) State the net electric-field strength at the origin (0,0)(0, 0). (b) For q=2.50 μCq = 2.50\,\mu\mathrm{C} and a=0.120 ma = 0.120\text{ m}, calculate the peak electric-field strength EmaxE_{\text{max}} along the yy-axis, which occurs at the critical coordinate y=a2y = \frac{a}{\sqrt{2}}. Use k=8.99×109 N⋅m2/C2k = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2.

Answer and steps

Final answer

(a) E=0 N/CE = 0\text{ N/C}; (b) Emax=6.00×105 N/CE_{\text{max}} = 6.00 \times 10^5\text{ N/C}

Steps

Part (a): Net Electric Field at the Origin

  1. Field from Each Charge:

    • The charge at x=+ax = +a produces an electric field at the origin (0,0)(0, 0) directed in the −x-x-direction: E⃗+=−kqa2 i^\vec{E}_+ = -\frac{k q}{a^2}\,\hat{i}
    • The charge at x=−ax = -a produces an electric field at (0,0)(0, 0) directed in the +x+x-direction: E⃗−=+kqa2 i^\vec{E}_- = +\frac{k q}{a^2}\,\hat{i}
  2. Superposition: E⃗net(0,0)=E⃗++E⃗−=−kqa2 i^+kqa2 i^=0\vec{E}_{\text{net}}(0, 0) = \vec{E}_+ + \vec{E}_- = -\frac{k q}{a^2}\,\hat{i} + \frac{k q}{a^2}\,\hat{i} = \mathbf{0}

    Therefore, the net electric-field strength at the origin is: E=0 N/CE = 0\text{ N/C}

    (Note: This disproves the student's prediction. Since the field is 0 N/C0\text{ N/C} at the origin and strictly positive for y>0y > 0, the field strength must initially increase before decreasing toward zero at infinity.)


Part (b): Peak Electric Field Along the Perpendicular Bisector

  1. Field Expression Along the yy-Axis: At an arbitrary point (0,y)(0, y) along the positive yy-axis:

    • The distance from each charge to (0,y)(0, y) is r=a2+y2r = \sqrt{a^2 + y^2}.
    • By symmetry, the horizontal components along the xx-axis cancel completely.
    • The vertical components reinforce each other along the +y+y-direction.

    Evaluating the net field along the bisector as a function of yy: E(y)=kqy(a2+y2)3/2E(y) = \frac{k q y}{(a^2 + y^2)^{3/2}}

  2. Evaluating at the Critical Point y=a2y = \frac{a}{\sqrt{2}}: Substitute y=a2y = \frac{a}{\sqrt{2}} into the denominator term: a2+y2=a2+a22=32a2a^2 + y^2 = a^2 + \frac{a^2}{2} = \frac{3}{2}a^2 (a2+y2)3/2=(32a2)3/2=3322a3(a^2 + y^2)^{3/2} = \left(\frac{3}{2}a^2\right)^{3/2} = \frac{3\sqrt{3}}{2\sqrt{2}}a^3

    Substitute yy and (a2+y2)3/2(a^2 + y^2)^{3/2} back into E(y)E(y): Emax=kq(a2)3322a3=2kq33a2E_{\text{max}} = \frac{k q \left(\frac{a}{\sqrt{2}}\right)}{\frac{3\sqrt{3}}{2\sqrt{2}}a^3} = \frac{2 k q}{3\sqrt{3} a^2}

  3. Numerical Substitution: Given values:

    • k=8.99×109 N⋅m2/C2k = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2
    • q=2.50 μC=2.50×10−6 Cq = 2.50\text{ }\mu\text{C} = 2.50 \times 10^{-6}\text{ C}
    • a=0.120 ma = 0.120\text{ m}

    Compute a2a^2: a2=(0.120 m)2=0.0144 m2a^2 = (0.120\text{ m})^2 = 0.0144\text{ m}^2

    Compute EmaxE_{\text{max}}: Emax=2(8.99×109 N⋅m2/C2)(2.50×10−6 C)33(0.0144 m2)E_{\text{max}} = \frac{2(8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(2.50 \times 10^{-6}\text{ C})}{3\sqrt{3}(0.0144\text{ m}^2)} Emax=449503×1.73205×0.0144≈449500.074825≈6.007×105 N/CE_{\text{max}} = \frac{44950}{3 \times 1.73205 \times 0.0144} \approx \frac{44950}{0.074825} \approx 6.007 \times 10^5\text{ N/C}

    Rounding to three significant figures: Emax=6.00×105 N/CE_{\text{max}} = 6.00 \times 10^5\text{ N/C}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats electric field as a scalar sum rather than resolving vector components, omitting the factor of y/r.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Eorigin=0 N/CE_{\text{origin}} = 0\text{ N/C}

  2. Step 2

    r2=a2+y2  ⟹  y=a2  ⟹  r2=a2+a22=1.5a2r^2 = a^2 + y^2 \implies y = \frac{a}{\sqrt{2}} \implies r^2 = a^2 + \frac{a^2}{2} = 1.5a^2

  3. Step 3

    E=2⋅k⋅qr2E = \frac{2 \cdot k \cdot q}{r^2}

    Correct

    Ey=2E1cos⁡θ=2(kqr2)(yr)=2kqy(a2+y2)3/2E_y = 2E_1\cos\theta = 2\left(\frac{kq}{r^2}\right)\left(\frac{y}{r}\right) = \frac{2kqy}{(a^2 + y^2)^{3/2}}

    You added the magnitudes of the two fields directly as scalars. Because electric field is a vector, you must resolve each field into components: the horizontal components cancel by symmetry, and only the vertical components add together, introducing a directional factor of cos⁡θ=yr\cos\theta = \frac{y}{r}.

  4. Step 4

    Emax=2⋅(8.99×109)⋅(2.50×10−6)(1.5⋅0.1202)  ⟹  Emax=2.08×106 N/CE_{\text{max}} = \frac{2 \cdot (8.99 \times 10^9) \cdot (2.50 \times 10^{-6})}{(1.5 \cdot 0.120^2)} \implies E_{\text{max}} = 2.08 \times 10^6\text{ N/C}

    Correct

    Emax=2kq(a2)(1.5a2)3/2=6.00×105 N/CE_{\text{max}} = \frac{2kq\left(\frac{a}{\sqrt{2}}\right)}{\left(1.5a^2\right)^{3/2}} = 6.00 \times 10^5\text{ N/C}

    Your arithmetic is consistent with your formula, but the result is affected by the missing projection factor yr\frac{y}{r}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined that the symmetric configuration yields a zero net electric field at the origin.

You correctly related the distance rr to the coordinates aa and yy and substituted y=a2y = \frac{a}{\sqrt{2}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar Addition of Vector Quantities

Your mistake was conceptual rather than a calculation slip: you summed the field magnitudes directly without resolving them into vector components along the line of symmetry.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating electric field as a scalar quantity (like electric potential) rather than a vector field whose oblique components must be projected onto the coordinate axes before summing.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector vs. Scalar Superposition
  • Electric potential VV adds algebraically as a scalar (Vnet=∑ViV_{\text{net}} = \sum V_i), but electric field E⃗\vec{E} adds as vectors (E⃗net=∑E⃗i\vec{E}_{\text{net}} = \sum \vec{E}_i).

  • Always draw the individual field vectors E⃗1\vec{E}_1 and E⃗2\vec{E}_2 at the observation point before writing down an equation.

Component Projection
  • When two symmetric fields make an angle θ\theta with the yy-axis, the net field along yy is Enet=2E1cos⁡θ=2(kqr2)(yr)E_{\text{net}} = 2E_1\cos\theta = 2\left(\frac{kq}{r^2}\right)\left(\frac{y}{r}\right).

  • Multiply the magnitude by the geometric ratio adjacenthypotenuse=yr\frac{\text{adjacent}}{\text{hypotenuse}} = \frac{y}{r} whenever summing components along the axis of symmetry.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve the field of each charge along the +y+y-direction: Ey=2(kqr2)cos⁡θ=2(kqr2)(yr)=2kqy(a2+y2)3/2E_y = 2 \left(\frac{kq}{r^2}\right) \cos\theta = 2 \left(\frac{kq}{r^2}\right) \left(\frac{y}{r}\right) = \frac{2kqy}{(a^2 + y^2)^{3/2}}.

  2. Substitute y=a2y = \frac{a}{\sqrt{2}}: the numerator is 2kq(a2)=2kqa2kq\left(\frac{a}{\sqrt{2}}\right) = \sqrt{2}kqa, and the denominator is (32a2)3/2=3322a3\left(\frac{3}{2}a^2\right)^{3/2} = \frac{3\sqrt{3}}{2\sqrt{2}}a^3.

  3. Simplify the symbolic expression: Emax=2kqa3322a3=2kq33a2E_{\text{max}} = \frac{\sqrt{2}kqa}{\frac{3\sqrt{3}}{2\sqrt{2}}a^3} = \frac{2kq}{3\sqrt{3}a^2}.

  4. Substitute the numerical values: Emax=2(8.99×109 N⋅m2/C2)(2.50×10−6 C)33(0.120 m)2≈6.00×105 N/CE_{\text{max}} = \frac{2(8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(2.50 \times 10^{-6}\text{ C})}{3\sqrt{3}(0.120\text{ m})^2} \approx 6.00 \times 10^5\text{ N/C}.

Final answer

(a) E=0 N/CE = 0\text{ N/C}; (b) Emax=6.00×105 N/CE_{\text{max}} = 6.00 \times 10^5\text{ N/C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching vector arrows at the evaluation point to identify which components cancel and which reinforce.

  • Contrast electric field calculations with electric potential calculations on the same charge geometry to reinforce the distinction between vector and scalar superposition.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the field from only one charge at the given point, forgetting to multiply by 2 for the contribution of both charges.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Enet=kqa2−kqa2=0 N/CE_{\text{net}} = \frac{k q}{a^2} - \frac{k q}{a^2} = 0\text{ N/C}

  2. Step 2

    y=0.1202=0.0849 m  ⟹  r=0.1202+0.08492=0.147 my = \frac{0.120}{\sqrt{2}} = 0.0849\text{ m} \implies r = \sqrt{0.120^2 + 0.0849^2} = 0.147\text{ m}

  3. Step 3

    Ey=(kqr2)(yr)E_y = \left(\frac{k q}{r^2}\right) \left(\frac{y}{r}\right)

    Correct

    Ey,net=2(kqr2)(yr)=2kqyr3E_{y,\text{net}} = 2\left(\frac{k q}{r^2}\right)\left(\frac{y}{r}\right) = \frac{2 k q y}{r^3}

    You wrote the vertical component for only a single charge. Because both identical charges +q+q sit symmetrically on either side of the origin, each contributes an identical vertical component in the +y+y-direction, requiring a factor of 22.

  4. Step 4

    Emax=(8.99×109×2.50×10−60.1472)(0.08490.147)  ⟹  Emax=6.01×105 N/CE_{\text{max}} = \left(\frac{8.99 \times 10^9 \times 2.50 \times 10^{-6}}{0.147^2}\right)\left(\frac{0.0849}{0.147}\right) \implies E_{\text{max}} = 6.01 \times 10^5\text{ N/C}

    Correct

    Emax=2×6.01×105 N/C≈1.20×106 N/CE_{\text{max}} = 2 \times 6.01 \times 10^5\text{ N/C} \approx 1.20 \times 10^6\text{ N/C}

    Your numerical substitution and arithmetic correctly followed your Step 3 formula, but because the factor of 22 was omitted earlier, your final value is exactly half of the true net field.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used vector superposition to find that the net field at the origin is zero.

You accurately evaluated the critical coordinate y=a2y = \frac{a}{\sqrt{2}} and the distance r=a2+y2r = \sqrt{a^2 + y^2}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Superposition Factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You set up the electric-field component for a single point charge rather than summing over all source charges, forgetting to multiply the symmetric vertical component by 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Superposition of Symmetric Charges
  • The net electric field is the vector sum over all sources: E⃗net=∑iE⃗i\vec{E}_{\text{net}} = \sum_i \vec{E}_i.

  • When horizontal components cancel by symmetry, write Ey,net=2E1yE_{y,\text{net}} = 2 E_{1y} before plugging in algebraic or numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include both charges in the net vertical field: Ey,net=2(kqr2)(yr)=2kqyr3E_{y,\text{net}} = 2\left(\frac{k q}{r^2}\right)\left(\frac{y}{r}\right) = \frac{2 k q y}{r^3}.

  2. Substitute k=8.99×109 N⋅m2/C2k = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2, q=2.50×10−6 Cq = 2.50 \times 10^{-6}\text{ C}, y=0.0849 my = 0.0849\text{ m}, and r=0.147 mr = 0.147\text{ m}: Emax=2×(8.99×109)(2.50×10−6)(0.0849)(0.147)3E_{\text{max}} = 2 \times \frac{(8.99 \times 10^9)(2.50 \times 10^{-6})(0.0849)}{(0.147)^3}.

  3. Evaluate the product: Emax=2×(6.01×105 N/C)=1.20×106 N/CE_{\text{max}} = 2 \times (6.01 \times 10^5\text{ N/C}) = 1.20 \times 10^6\text{ N/C}.

Final answer

Emax=1.20×106 N/CE_{\text{max}} = 1.20 \times 10^6\text{ N/C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw individual field vectors E⃗1\vec{E}_1 and E⃗2\vec{E}_2 at the field point before writing scalar formulas.

  • Check that your algebraic formula contains a term or prefactor for every charge present in the configuration.

OverviewACEpath Teacher's Diagnosis

03 The student assumes the field strength at the origin is the simple algebraic sum of the magnitudes of the two individual charges instead of recognizing vector cancellation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E=k⋅q/a2+k⋅q/a2=2k⋅q/a2  ⟹  E=2⋅(8.99×109)(2.50×10−6)/(0.1202)  ⟹  Eorigin=3.12×106 N/CE = k \cdot q/a^2 + k \cdot q/a^2 = 2k \cdot q/a^2 \implies E = 2 \cdot (8.99 \times 10^9)(2.50 \times 10^{-6}) / (0.120^2) \implies E_{\text{origin}} = 3.12 \times 10^6\text{ N/C}

    Correct

    E⃗net(0,0)=E⃗++E⃗−=−kqa2 i^+kqa2 i^=0  ⟹  E=0 N/C\vec{E}_{\text{net}}(0, 0) = \vec{E}_+ + \vec{E}_- = -\frac{k q}{a^2}\,\hat{i} + \frac{k q}{a^2}\,\hat{i} = \mathbf{0} \implies E = 0\text{ N/C}

    You treated the electric field as a scalar by adding the magnitudes directly. Because both charges are positive and symmetrically placed at x=−ax = -a and x=+ax = +a, their electric fields at (0,0)(0, 0) point in opposite directions (+i^+\hat{i} and −i^-\hat{i}) and cancel out completely.

  2. Step 2

    E(y)=2⋅k⋅q⋅y/(a2+y2)3/2  ⟹  At y=a/2:Emax=4⋅k⋅q/(33⋅a2)  ⟹  Emax=4(8.99×109)(2.50×10−6)/(33⋅0.1202)  ⟹  Emax=1.20×106 N/CE(y) = 2 \cdot k \cdot q \cdot y / (a^2 + y^2)^{3/2} \implies \text{At } y = a/\sqrt{2}: E_{\text{max}} = 4 \cdot k \cdot q / (3\sqrt{3} \cdot a^2) \implies E_{\text{max}} = 4(8.99 \times 10^9)(2.50 \times 10^{-6}) / (3\sqrt{3} \cdot 0.120^2) \implies E_{\text{max}} = 1.20 \times 10^6\text{ N/C}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the distance and geometric components needed for field superposition along the perpendicular bisector.

You correctly substituted the critical coordinate y=a2y = \frac{a}{\sqrt{2}} into the field function and simplified the algebraic expression.

You performed accurate numerical calculations with correct scientific notation and physical units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar addition of vector fields

You summed the field magnitudes directly at the origin rather than writing vector components.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated electric field strength as a scalar quantity like electric potential, overlooking that collinear electric fields pointing in opposite directions subtract.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Nature of Electric Fields
  • The net electric field is the vector sum E⃗net=∑E⃗i\vec{E}_{\text{net}} = \sum \vec{E}_i, never the scalar sum of magnitudes ∑∣E⃗i∣\sum |\vec{E}_i|.

  • Always draw unit vectors or arrow directions at the point of interest before writing algebraic equations.

Symmetry and Cancellation
  • Equal positive charges placed symmetrically on opposite sides of a midpoint produce equal and oppositely directed electric fields at that midpoint.

  • Check whether symmetry causes opposing field vectors to cancel to 0\mathbf{0} before computing numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the field from the charge at x=+ax = +a: E⃗+=−kqa2 i^\vec{E}_+ = -\frac{k q}{a^2}\,\hat{i}.

  2. Identify the field from the charge at x=−ax = -a: E⃗−=+kqa2 i^\vec{E}_- = +\frac{k q}{a^2}\,\hat{i}.

  3. Add the two vectors: E⃗net(0,0)=(−kqa2+kqa2)i^=0\vec{E}_{\text{net}}(0, 0) = \left(-\frac{k q}{a^2} + \frac{k q}{a^2}\right)\hat{i} = \mathbf{0}.

Final answer

(a) E=0 N/CE = 0\text{ N/C}; (b) Emax=1.20×106 N/CE_{\text{max}} = 1.20 \times 10^6\text{ N/C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing field vectors at observation points before writing algebraic formulas.

  • Contrast electric potential VV (a scalar, where identical charges add: V=2kq/aV = 2kq/a) with electric field E⃗\vec{E} (a vector, where opposing fields cancel: E⃗=0\vec{E} = \mathbf{0}).

  • Complete the follow-up drills to solidify vector superposition.

Lock it in

Similar question

01

Two identical positive point charges +q=4.00 \muC+q = 4.00\text{ \mu C} are located on the xx-axis at x=−0.300 mx = -0.300\text{ m} and x=+0.300 mx = +0.300\text{ m}. Find the net electric-field strength at the point (0,0.400 m)(0, 0.400\text{ m}) on the yy-axis. Use k=8.99×109 N⋅m2/C2k = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2.

Answer

Enet=1.84×105 N/CE_{\text{net}} = 1.84 \times 10^5\text{ N/C}. Key steps: r=0.3002+0.4002=0.500 mr = \sqrt{0.300^2 + 0.400^2} = 0.500\text{ m}. Horizontal components cancel; vertical components reinforce with cos⁡θ=yr=0.4000.500=0.800\cos\theta = \frac{y}{r} = \frac{0.400}{0.500} = 0.800. Thus, Enet=2(kqr2)cos⁡θ=2(8.99×109×4.00×10−60.250)(0.800)≈1.84×105 N/CE_{\text{net}} = 2\left(\frac{kq}{r^2}\right)\cos\theta = 2\left(\frac{8.99 \times 10^9 \times 4.00 \times 10^{-6}}{0.250}\right)(0.800) \approx 1.84 \times 10^5\text{ N/C} directed along +y+y.

02

An electric dipole consists of charge +q+q at (0,+d)(0, +d) and charge −q-q at (0,−d)(0, -d) along the yy-axis. Derive the net electric field E⃗\vec{E} at a point (x,0)(x, 0) on the perpendicular bisector (x>0x > 0), expressing the answer in terms of kk, qq, dd, and xx.

Answer

E⃗=−2kqd(x2+d2)3/2 j^\vec{E} = -\frac{2kqd}{(x^2 + d^2)^{3/2}}\,\hat{j}. Key steps: Distance to (x,0)(x, 0) from each charge is r=x2+d2r = \sqrt{x^2 + d^2}. The xx-components of the fields cancel because one charge is positive and the other is negative. The yy-components both point in the −j^-\hat{j} direction, each with magnitude E1y=(kqr2)sin⁡θ=(kqr2)(dr)=kqd(x2+d2)3/2E_{1y} = \left(\frac{kq}{r^2}\right)\sin\theta = \left(\frac{kq}{r^2}\right)\left(\frac{d}{r}\right) = \frac{kqd}{(x^2 + d^2)^{3/2}}. Summing both gives −2kqd(x2+d2)3/2 j^-\frac{2kqd}{(x^2 + d^2)^{3/2}}\,\hat{j}.

03

Two identical positive charges +q+q are placed at x=−ax = -a and x=+ax = +a. Using calculus on the on-axis field E(y)=2kqy(a2+y2)3/2E(y) = \frac{2kqy}{(a^2 + y^2)^{3/2}}, show that the peak electric-field strength occurs at y=a2y = \frac{a}{\sqrt{2}} and determine the ratio of this peak field to the field at y=ay = a.

Answer

Critical point is y=a2y = \frac{a}{\sqrt{2}} and the ratio is EmaxE(a)=4233≈1.089\frac{E_{\text{max}}}{E(a)} = \frac{4\sqrt{2}}{3\sqrt{3}} \approx 1.089. Key steps: Set dEdy=2kq(a2+y2)3/2−y⋅32(a2+y2)1/2(2y)(a2+y2)3=0  ⟹  a2+y2−3y2=0  ⟹  y=a2\frac{dE}{dy} = 2kq \frac{(a^2+y^2)^{3/2} - y\cdot \frac{3}{2}(a^2+y^2)^{1/2}(2y)}{(a^2+y^2)^3} = 0 \implies a^2 + y^2 - 3y^2 = 0 \implies y = \frac{a}{\sqrt{2}}. Evaluating at y=a2y = \frac{a}{\sqrt{2}} gives Emax=2kq33a2E_{\text{max}} = \frac{2kq}{3\sqrt{3}a^2}. Evaluating at y=ay = a gives E(a)=2kqa(2a2)3/2=kq2a2E(a) = \frac{2kqa}{(2a^2)^{3/2}} = \frac{kq}{\sqrt{2}a^2}. Taking the ratio yields EmaxE(a)=2/(33)1/2=2233×2=4233≈1.089\frac{E_{\text{max}}}{E(a)} = \frac{2/(3\sqrt{3})}{1/\sqrt{2}} = \frac{2\sqrt{2}}{3\sqrt{3}} \times 2 = \frac{4\sqrt{2}}{3\sqrt{3}} \approx 1.089.

Loading workspace…