Resources

A block of mass m1m_1 rests on a frictionless horizontal tabletop and is connected by a light cord over a frictionless pulley to a suspended mass m2m_2. Let aa denote the downward acceleration of mass m2m_2 and TT denote the tension in the cord. (a) Express the acceleration aa and tension TT in terms of m1m_1, m2m_2, and gg. (b) Evaluate the asymptotic limits of both aa and TT as the hanging mass becomes infinitely large compared to the table mass (m2→∞m_2 \to \infty with m1m_1 held fixed). (c) Evaluate the asymptotic limits of both aa and TT as the table mass becomes infinitely large compared to the hanging mass (m1→∞m_1 \to \infty with m2m_2 held fixed).

Answer and steps

Final answer

(a) a=m2m1+m2ga = \frac{m_2}{m_1 + m_2}g, T=m1m2m1+m2gT = \frac{m_1 m_2}{m_1 + m_2}g; (b) As m2→∞m_2 \to \infty: lim⁡a=g\lim a = g, lim⁡T=m1g\lim T = m_1 g; (c) As m1→∞m_1 \to \infty: lim⁡a=0\lim a = 0, lim⁡T=m2g\lim T = m_2 g

Steps

Part (a): Finding Acceleration and Tension

  1. Identify the forces acting on each mass:

    • For mass m1m_1 (on the horizontal table):

      • Vertically: Gravity m1gm_1 g acts downward, balanced by the normal force FNF_N from the frictionless table (FN=m1gF_N = m_1 g).
      • Horizontally: The only force acting along the line of motion is the cord tension TT directed toward the pulley.
      • Applying Newton's second law in the horizontal direction: T=m1aT = m_1 a
    • For mass m2m_2 (suspended vertically):

      • Vertically: The downward gravitational force is m2gm_2 g, and the upward force exerted by the cord is the tension TT.
      • Taking the downward direction as positive (since the block accelerates downward with magnitude aa): m2g−T=m2am_2 g - T = m_2 a
  2. Solve for the acceleration aa:

    • Substitute the expression for tension T=m1aT = m_1 a into the equation of motion for m2m_2: m2g−m1a=m2am_2 g - m_1 a = m_2 a
    • Group the terms involving acceleration aa: (m1+m2)a=m2g(m_1 + m_2) a = m_2 g a=m2m1+m2ga = \frac{m_2}{m_1 + m_2} g
  3. Solve for the tension TT:

    • Substitute aa back into T=m1aT = m_1 a: T=m1(m2m1+m2g)=m1m2m1+m2gT = m_1 \left(\frac{m_2}{m_1 + m_2} g\right) = \frac{m_1 m_2}{m_1 + m_2} g

Part (b): Asymptotic Limit as m2→∞m_2 \to \infty (Fixed m1m_1)

Rewrite the expressions by dividing numerator and denominator by m2m_2: a=1m1m2+1ga = \frac{1}{\frac{m_1}{m_2} + 1} g T=m11+m1m2gT = \frac{m_1}{1 + \frac{m_1}{m_2}} g

Taking the limit as m2→∞m_2 \to \infty (so m1m2→0\frac{m_1}{m_2} \to 0):

  • Acceleration: lim⁡m2→∞a=10+1g=g\lim_{m_2 \to \infty} a = \frac{1}{0 + 1} g = g
  • Tension: lim⁡m2→∞T=m11+0g=m1g\lim_{m_2 \to \infty} T = \frac{m_1}{1 + 0} g = m_1 g

Physical interpretation: When the hanging mass is enormously heavier than the table mass, it experiences essentially uninhibited free fall (a→ga \to g). To accelerate the small mass m1m_1 at rate gg, the cord must exert a force of T=m1gT = m_1 g.


Part (c): Asymptotic Limit as m1→∞m_1 \to \infty (Fixed m2m_2)

Rewrite the expressions by dividing numerator and denominator by m1m_1: a=m2m11+m2m1ga = \frac{\frac{m_2}{m_1}}{1 + \frac{m_2}{m_1}} g T=m21+m2m1gT = \frac{m_2}{1 + \frac{m_2}{m_1}} g

Taking the limit as m1→∞m_1 \to \infty (so m2m1→0\frac{m_2}{m_1} \to 0):

  • Acceleration: lim⁡m1→∞a=01+0g=0\lim_{m_1 \to \infty} a = \frac{0}{1 + 0} g = 0
  • Tension: lim⁡m1→∞T=m21+0g=m2g\lim_{m_1 \to \infty} T = \frac{m_2}{1 + 0} g = m_2 g

Physical interpretation: When the mass on the table is extraordinarily massive, it behaves like an immovable wall. The system remains virtually stationary (a→0a \to 0), and the hanging mass is held in static equilibrium, resulting in a cord tension equal to its full weight (T=m2gT = m_2 g).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes tension equals the weight of the hanging mass, ignoring that the accelerating hanging mass is not in static equilibrium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T=m2gT = m_2 g

    Correct

    m2g−T=m2am_2 g - T = m_2 a

    The hanging mass accelerates downward with acceleration aa, so the net vertical force is not zero. Applying Newton's second law downward gives m2g−T=m2am_2 g - T = m_2 a, meaning T=m2(g−a)<m2gT = m_2(g - a) < m_2 g.

  2. Step 2

    T=m1aT = m_1 a

  3. Step 3

    m2g=m1a  ⟹  a=m2gm1,T=m2gm_2 g = m_1 a \implies a = \frac{m_2 g}{m_1}, \quad T = m_2 g

    Correct

    m2g−m1a=m2a  ⟹  a=m2m1+m2g,T=m1m2m1+m2gm_2 g - m_1 a = m_2 a \implies a = \frac{m_2}{m_1 + m_2}g, \quad T = \frac{m_1 m_2}{m_1 + m_2}g

    Substituting T=m2gT = m_2 g into T=m1aT = m_1 a omitted the inertia of the hanging mass from the total accelerating mass, producing an incorrect formula for aa.

  4. Step 4

    As m2→∞,a→∞,T→∞\text{As } m_2 \to \infty, \quad a \to \infty, \quad T \to \infty

    Correct

    lim⁡m2→∞a=g,lim⁡m2→∞T=m1g\lim_{m_2 \to \infty} a = g, \quad \lim_{m_2 \to \infty} T = m_1 g

    Because of the incorrect formula for aa, you concluded that acceleration approaches infinity. In reality, the hanging mass cannot accelerate faster than free-fall gravity gg.

  5. Step 5

    As m1→∞,a→0,T=m2g\text{As } m_1 \to \infty, \quad a \to 0, \quad T = m_2 g

    Correct

    lim⁡m1→∞a=0,lim⁡m1→∞T=m2g\lim_{m_1 \to \infty} a = 0, \quad \lim_{m_1 \to \infty} T = m_2 g

    These limits match the true values, but they were evaluated from the flawed premise that tension is constantly m2gm_2 g rather than taking the limit of T=m1m2m1+m2gT = \frac{m_1 m_2}{m_1 + m_2}g.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up Newton's second law for the block on the frictionless table (T=m1aT = m_1 a).

You understood how to take asymptotic limits as masses approach infinity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Static Equilibrium Assumption for Accelerating Body

Assuming T=m2gT = m_2 g for the suspended mass

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating an accelerating connected object as if it were in static equilibrium. When a hanging mass accelerates downward, gravity must exceed the upward cord tension (m2g>Tm_2 g > T), so tension only equals full weight when acceleration is zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Newton's Second Law for Accelerating Objects
  • ∑F=ma\sum F = ma along the direction of motion. Only set ∑F=0\sum F = 0 if the acceleration is zero.

  • Draw a free-body diagram showing both m2gm_2 g downward and TT upward, and write m2g−T=m2am_2 g - T = m_2 a.

Physical Sanity Check on Limits
  • In a gravity-driven system without external driving forces, acceleration can never exceed gg.

  • If a limit yields a→∞a \to \infty, re-check your equations to ensure total mass was included in Fnet=mtotalaF_{\text{net}} = m_{\text{total}} a.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up Newton's second law for the hanging mass: m2g−T=m2am_2 g - T = m_2 a.

  2. Substitute T=m1aT = m_1 a into this equation: m2g−m1a=m2am_2 g - m_1 a = m_2 a.

  3. Factor out aa: (m1+m2)a=m2g  ⟹  a=m2m1+m2g(m_1 + m_2)a = m_2 g \implies a = \frac{m_2}{m_1 + m_2}g.

  4. Substitute aa back to find tension: T=m1a=m1m2m1+m2gT = m_1 a = \frac{m_1 m_2}{m_1 + m_2}g.

  5. Take the limit as m2→∞m_2 \to \infty: a=1m1m2+1g→ga = \frac{1}{\frac{m_1}{m_2} + 1}g \to g, and T=m11+m1m2g→m1gT = \frac{m_1}{1 + \frac{m_1}{m_2}}g \to m_1 g.

  6. Take the limit as m1→∞m_1 \to \infty: a=m2m11+m2m1g→0a = \frac{\frac{m_2}{m_1}}{1 + \frac{m_2}{m_1}}g \to 0, and T=m21+m2m1g→m2gT = \frac{m_2}{1 + \frac{m_2}{m_1}}g \to m_2 g.

Final answer

(a) a=m2m1+m2ga = \frac{m_2}{m_1 + m_2}g, T=m1m2m1+m2gT = \frac{m_1 m_2}{m_1 + m_2}g; (b) As m2→∞m_2 \to \infty: a→ga \to g, T→m1gT \to m_1 g; (c) As m1→∞m_1 \to \infty: a→0a \to 0, T→m2gT \to m_2 g

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write ∑F=ma\sum F = ma separately for each connected body before substituting tension.

  • Check whether the accelerating mass has a downward acceleration, which requires tension T=m(g−a)<mgT = m(g - a) < mg.

  • Verify your final algebraic formula against extreme limits: acceleration should stay within 0≤a≤g0 \le a \le g.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to include the mass on the table in the total accelerated inertia of the system, setting the net force m₂g equal to m₂a instead of (m₁ + m₂)a.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fnet=m2g  ⟹  m2g=m2a  ⟹  a=gF_{\text{net}} = m_2 g \implies m_2 g = m_2 a \implies a = g

    Correct

    Fnet=(m1+m2)a  ⟹  m2g=(m1+m2)a  ⟹  a=m2m1+m2gF_{\text{net}} = (m_1 + m_2)a \implies m_2 g = (m_1 + m_2)a \implies a = \frac{m_2}{m_1 + m_2}g

    You set the net force m2gm_2 g equal to only m2am_2 a, omitting the mass of the block on the table (m1m_1). Because both masses are tied together and accelerate at the same rate, the net force must accelerate the combined mass (m1+m2)(m_1 + m_2).

  2. Step 2

    T=m1a=m1gT = m_1 a = m_1 g

    Correct

    T=m1a=m1m2m1+m2gT = m_1 a = \frac{m_1 m_2}{m_1 + m_2}g

    Your relation T=m1aT = m_1 a is correct, but substituting your earlier result a=ga = g propagated the error to the tension expression.

  3. Step 3

    As m2→∞,  a=g,  T=m1g\text{As } m_2 \to \infty,\; a = g,\; T = m_1 g

    Correct

    lim⁡m2→∞a=g,  lim⁡m2→∞T=m1g\lim_{m_2 \to \infty} a = g,\; \lim_{m_2 \to \infty} T = m_1 g

    These numerical limits happen to match the true asymptotic values, but they were evaluated directly from your uncoupled equations where a=ga = g identically rather than from taking limits of the true rational expressions.

  4. Step 4

    As m1→∞,  a=g,  T→∞\text{As } m_1 \to \infty,\; a = g,\; T \to \infty

    Correct

    lim⁡m1→∞a=0,  lim⁡m1→∞T=m2g\lim_{m_1 \to \infty} a = 0,\; \lim_{m_1 \to \infty} T = m_2 g

    Because your acceleration formula omitted m1m_1, your limit kept a=ga = g and gave an infinite tension. With the correct expressions, an infinitely heavy table mass acts like an anchor: the acceleration drops to 00 and the tension equals the hanging weight m2gm_2 g.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the net external driving force pulling the entire system is the gravitational force on the hanging mass, Fnet=m2gF_{\text{net}} = m_2 g.

You correctly applied Newton's second law to the horizontal mass by writing T=m1aT = m_1 a.

You understood how to evaluate limits as a parameter approaches infinity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted system inertia in connected-body Newton's second law

You wrote m2g=m2am_2 g = m_2 a instead of setting Fnet=mtotala=(m1+m2)aF_{\text{net}} = m_{\text{total}} a = (m_1 + m_2)a.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the hanging block as if it were in free fall alone rather than coupled to the mass on the table. When two or more objects are connected by an inextensible cord, the external driving force must accelerate the entire system's total inertia, mtotal=m1+m2m_{\text{total}} = m_1 + m_2.

REASONING PATH
Your ACEpath teacher’s suggested approach
System vs. Component Newton's Second Law
  • For a system of connected objects accelerating together: Fnet, external=mtotala=(∑mi)aF_{\text{net, external}} = m_{\text{total}} a = (\sum m_i) a.

  • Always sum all moving masses into mtotalm_{\text{total}} when writing the single-system equation of motion, or write separate free-body equations for each body (T=m1aT = m_1 a and m2g−T=m2am_2 g - T = m_2 a) and add them.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law for the connected two-mass system: Fnet, ext=(m1+m2)aF_{\text{net, ext}} = (m_1 + m_2)a.

  2. Substitute the unbalanced external force: m2g=(m1+m2)a  ⟹  a=m2m1+m2gm_2 g = (m_1 + m_2)a \implies a = \frac{m_2}{m_1 + m_2}g.

  3. Substitute this acceleration into T=m1aT = m_1 a: T=m1m2m1+m2gT = \frac{m_1 m_2}{m_1 + m_2}g.

  4. Evaluate part (b) by dividing numerator and denominator by m2m_2: as m2→∞m_2 \to \infty, m1m2→0\frac{m_1}{m_2} \to 0, so a→ga \to g and T→m1gT \to m_1 g.

  5. Evaluate part (c) by dividing numerator and denominator by m1m_1: as m1→∞m_1 \to \infty, m2m1→0\frac{m_2}{m_1} \to 0, so a→0a \to 0 and T→m2gT \to m_2 g.

Final answer

(a) a=m2m1+m2ga = \frac{m_2}{m_1 + m_2}g, T=m1m2m1+m2gT = \frac{m_1 m_2}{m_1 + m_2}g; (b) lim⁡a=g\lim a = g, lim⁡T=m1g\lim T = m_1 g; (c) lim⁡a=0\lim a = 0, lim⁡T=m2g\lim T = m_2 g

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice setting up coupled systems both ways: as a single unified system with mtotalm_{\text{total}}, and by drawing two separate free-body diagrams to verify that internal tension cancels.

  • Test your resulting formulas using physical intuition on limiting cases: an immovable block (m1→∞m_1 \to \infty) must hold the system stationary (a→0a \to 0).

OverviewACEpath Teacher's Diagnosis

03 The student intuitively concludes that cord tension drops to zero as the hanging mass becomes infinitely heavy and accelerates at g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=m1a  ⟹  m2g−T=m2a  ⟹  m2g=(m1+m2)a  ⟹  a=m2gm1+m2T = m_1 a \implies m_2 g - T = m_2 a \implies m_2 g = (m_1 + m_2)a \implies a = \frac{m_2 g}{m_1 + m_2}

  2. Step 2

    T=m1m2gm1+m2T = \frac{m_1 m_2 g}{m_1 + m_2}

  3. Step 3

    As m2→∞m_2 \to \infty, a=ga = g. Since the mass is in free fall, T=0T = 0.

    Correct

    lim⁡m2→∞a=g\lim_{m_2 \to \infty} a = g and lim⁡m2→∞T=m1g\lim_{m_2 \to \infty} T = m_1 g

    While a→ga \to g is correct, T→0T \to 0 is incorrect. Taking the algebraic limit yields lim⁡m2→∞m1g1+m1/m2=m1g\lim_{m_2 \to \infty} \frac{m_1 g}{1 + m_1/m_2} = m_1 g. Physically, because mass m1m_1 accelerates horizontally at rate gg, the cord must exert a horizontal force of T=m1a=m1gT = m_1 a = m_1 g on it.

  4. Step 4

    As m1→∞m_1 \to \infty, a=0a = 0 and T=m2gT = m_2 g

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Newton's second law to both objects and solved the system of linear equations for aa and TT.

You correctly evaluated the limit of acceleration as m2→∞m_2 \to \infty.

You correctly evaluated both asymptotic limits as m1→∞m_1 \to \infty.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
intuitive free-fall fallacy in connected systems

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on an intuitive shortcut—assuming that an acceleration of gg implies an unconstrained free fall with zero tension—rather than evaluating the mathematical limit of the tension formula or checking Newton's second law on mass m1m_1 (T=m1aT = m_1 a).

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate the Algebraic Limit Directly
  • For a rational expression in m2m_2, divide the numerator and denominator by the highest power of m2m_2 before evaluating the limit.

  • Write T=m1g1+m1m2T = \frac{m_1 g}{1 + \frac{m_1}{m_2}}, then let m1m2→0\frac{m_1}{m_2} \to 0 to get T→m1gT \to m_1 g.

Verify with Newton's Second Law for the Connected Mass
  • Because the cord is inextensible, both blocks have the same acceleration magnitude aa. Mass m1m_1 experiences a net horizontal force of T=m1aT = m_1 a.

  • If a→ga \to g, then the tension required to accelerate m1m_1 must approach T=m1gT = m_1 g, not zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide numerator and denominator of TT by m2m_2: T=m1g1+m1m2T = \frac{m_1 g}{1 + \frac{m_1}{m_2}}.

  2. Evaluate the limit as m2→∞m_2 \to \infty: since m1m2→0\frac{m_1}{m_2} \to 0, we find lim⁡m2→∞T=m1g1+0=m1g\lim_{m_2 \to \infty} T = \frac{m_1 g}{1 + 0} = m_1 g.

Final answer

(a) a=m2m1+m2ga = \frac{m_2}{m_1 + m_2}g, T=m1m2m1+m2gT = \frac{m_1 m_2}{m_1 + m_2}g; (b) As m2→∞m_2 \to \infty: lim⁡a=g\lim a = g, lim⁡T=m1g\lim T = m_1 g; (c) As m1→∞m_1 \to \infty: lim⁡a=0\lim a = 0, lim⁡T=m2g\lim T = m_2 g

NEXT STEPS
Final Takeaways from Your Teacher
  • Always evaluate the algebraic limit directly instead of relying on the physical intuition of isolated free fall.

  • Cross-check cord tension by applying T=m1aT = m_1 a to the horizontal block after determining the limit of acceleration.

Lock it in

Similar question

01

A block of mass M=3 kgM = 3\text{ kg} sits on a frictionless horizontal table and is connected via a light cord over a frictionless pulley to a hanging mass m=2 kgm = 2\text{ kg}. Find the acceleration aa of the system and the tension TT in the cord. (Use g=10 m/s2g = 10\text{ m/s}^2).

Answer

a=4 m/s2a = 4\text{ m/s}^2, T=12 NT = 12\text{ N}. Key steps: mg−T=mam g - T = m a and T=Ma  ⟹  (M+m)a=mg  ⟹  a=23+2(10)=4 m/s2T = M a \implies (M + m)a = m g \implies a = \frac{2}{3+2}(10) = 4\text{ m/s}^2. Then T=3(4)=12 NT = 3(4) = 12\text{ N} (notice 12 N<20 N=mg12\text{ N} < 20\text{ N} = mg).

02

Two masses mA=4 kgm_A = 4\text{ kg} and mB=1 kgm_B = 1\text{ kg} are connected as a standard vertical Atwood machine over a frictionless pulley (mA>mBm_A > m_B). Express the cord tension TT in terms of gg, and explain why mBg<T<mAgm_B g < T < m_A g.

Answer

T=2mAmBmA+mBg=85g=1.6gT = \frac{2 m_A m_B}{m_A + m_B}g = \frac{8}{5}g = 1.6 g. Key steps: mAg−T=mAam_A g - T = m_A a and T−mBg=mBaT - m_B g = m_B a. Since mAm_A accelerates downward, T<mAg=4gT < m_A g = 4g. Since mBm_B accelerates upward, T>mBg=1gT > m_B g = 1g.

03

A block of mass m1m_1 on a horizontal table with coefficient of kinetic friction μk\mu_k is pulled by a hanging mass m2m_2. Find the tension TT in the cord while the system is accelerating. Evaluate TT in the limit as m1→0m_1 \to 0.

Answer

T=m1m2(1+μk)m1+m2gT = \frac{m_1 m_2 (1 + \mu_k)}{m_1 + m_2}g. As m1→0m_1 \to 0, T→0T \to 0. Key steps: T−μkm1g=m1aT - \mu_k m_1 g = m_1 a and m2g−T=m2am_2 g - T = m_2 a. Solving gives a=m2−μkm1m1+m2ga = \frac{m_2 - \mu_k m_1}{m_1 + m_2}g. Substituting back gives T=m1(a+μkg)=m1m2(1+μk)m1+m2gT = m_1(a + \mu_k g) = \frac{m_1 m_2 (1 + \mu_k)}{m_1 + m_2}g. When m1→0m_1 \to 0, the cord does not need to pull any mass, so tension vanishes.

Loading workspace…