Resources
An ideal diatomic gas () undergoes a closed three-step thermodynamic cycle: Step is an isobaric expansion at pressure from volume to ; Step is an isochoric depressurization to pressure ; and Step is an isothermal compression returning the gas to state 1. Using the standard thermodynamic sign convention where work done on the surroundings is positive () and heat added to the system is positive (), calculate the net work done by the gas during one complete cycle, , and state whether heat is net absorbed or net released over the cycle.
Answer and steps
Final answer
, net heat is absorbed ()
Steps
Work Done During Step (Isobaric Expansion)
In an isobaric process, the pressure remains constant at while the gas expands from to .
The work done by the gas is:
Substitute the given values:
Work Done During Step (Isochoric Depressurization)
In an isochoric process, the volume remains constant (). Therefore, no boundary work is performed:
Work Done During Step (Isothermal Compression)
During an isothermal process returning the gas from pressure to , the work done is expressed in terms of the pressure ratio:
Evaluating with the characteristic energy scale of the cycle :
Using :
(Pitfall: Note the negative sign; work is done on the gas during compression, so the work done by the gas is negative).
Net Work Over the Complete Cycle
The net work done by the gas over one full cycle is the sum of the work done in each individual step:
Net Heat Absorbed or Released
Because the gas returns to its initial state at the end of the closed cycle, the net change in internal energy over the complete cycle is zero:
According to the First Law of Thermodynamics:
Since , net heat is absorbed by the gas during the cycle.
Typical errors
01 The student approximates the closed cycle on the P-V diagram as a right triangle, treating the curved isothermal compression from state 3 to state 1 as a straight line.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
An isothermal process follows a non-linear curve on a diagram, so the enclosed cycle is not a polygon. You must compute the work along each individual segment or integrate under the isothermal curve rather than using the geometric area formula for a triangle.
- Step 2Correct
Your reasoning that for a closed thermodynamic cycle is conceptually correct, but the numerical value is carried over from the incorrect work calculation in Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the net change in internal energy over a complete closed cycle is zero, leading to .
You correctly concluded that positive net work implies net heat is absorbed by the system.
You accurately substituted the numerical values for the pressure and volume differences.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou approximated the curved isothermal path on the diagram as a straight line, calculating the enclosed area as a simple right triangle.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating thermodynamic paths on a diagram as straight lines without checking path curvature. Isothermal processes follow hyperbolic curves where work must be found via integration (), which yields logarithmic expressions rather than triangular areas.
REASONING PATH
Your ACEpath teacher’s suggested approach- Path Linearity Check
Only paths with linear relationships form polygonal areas on a diagram; isothermal paths are non-linear curves ().
Examine each step of the cycle individually and apply the specific work integral for that process before attempting a geometric area shortcut.
- Isothermal Work Formula
For an ideal gas undergoing an isothermal process at temperature , .
Calculate the work along the isothermal segment using logarithmic pressure or volume ratios instead of straight-line trapezoidal or triangular approximations.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the isobaric work: .
Identify the isochoric work: since , .
Calculate the isothermal compression work: .
Sum the segment works: .
Apply the First Law for the closed cycle: .
, net heat is absorbed ()
02 The student treats the isothermal compression step as an isobaric process at pressure P_3, failing to integrate the varying pressure along the isotherm.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
W_{23} = 0\text{ J}\text{ (V is constant)}
- Step 3Correct
Step is an isothermal process where pressure increases continuously as the gas is compressed. You treated it as an isobaric process at constant pressure . The work must be evaluated using the integral .
- Step 4Correct
Your method of summing the work from all steps is correct, but your result carries over the error from Step 3.
- Step 5Correct
You correctly reasoned that over a complete closed cycle so , and correctly concluded that heat is absorbed because the value is positive. The numerical value is affected by the earlier calculation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the isobaric expansion work using .
You correctly identified that isochoric processes perform zero boundary work.
You correctly applied the cyclic property to conclude that .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou applied the constant-pressure work expression to an isothermal compression where pressure varies inversely with volume, overlooking the logarithmic integration formula .
REASONING PATH
Your ACEpath teacher’s suggested approach- Process Classification
An isothermal process follows , meaning pressure changes as volume changes.
Always verify whether pressure is held constant before using .
- Isothermal Work Integration
For an ideal gas undergoing an isothermal process, .
Use the logarithmic form with the characteristic thermal energy and the pressure or volume ratio.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that step is an isothermal compression from to .
Calculate the isothermal work using .
Sum the individual work contributions: .
Use the first law of thermodynamics for a closed cycle: , confirming net heat is absorbed.
, net heat is absorbed ()
03 The student adds the magnitude of work done during compression instead of subtracting it, assuming all work terms are positive.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
During an isothermal compression, the gas is compressed (), meaning work is done on the gas by the surroundings. Under the convention , work done by the gas is negative, so you should not take the absolute value.
- Step 4Correct
Your summation formula is correct, but your result inherits the sign error from Step 3.
- Step 5Correct
You correctly concluded that over a cycle so , but the numerical value is affected by the earlier sign error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the expansion work for the isobaric process .
You correctly identified that the isochoric step produces zero work.
You correctly related the net heat to the net cycle work using the cyclic condition .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou forced the isothermal work magnitude to be positive by placing absolute-value bars around the expression, rather than letting the logarithmic volume or pressure ratio determine the algebraic sign.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating thermodynamic work as an intrinsically positive quantity or energy magnitude rather than an algebraically signed integral () that is negative whenever the gas undergoes compression.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Volume Differential
For any thermodynamic path evaluated as work done by the system, . When , and therefore .
Do not wrap work formulas in absolute value signs; keep the natural sign resulting from or .
- Direction on a P-V Diagram
A clockwise closed cycle on a standard diagram encloses positive net work, whereas counterclockwise encloses negative net work.
Notice that the compression path forms the lower boundary of the cycle and subtracts area from the expansion path above it.
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the integral with correct initial and final states: .
Substitute the cycle values without absolute values: .
Sum the signed work values: .
Apply the First Law over the closed cycle: because , , meaning heat is net absorbed.
, net heat is absorbed ()
Lock it in
When can you use simple geometric area formulas (like triangles or trapezoids) to find the net work of a cycle on a diagram?
Only when all cycle paths are straight lines on the plot. Curved paths (such as isothermal or adiabatic curves) require integration or exact process formulas.
Similar question
An ideal gas undergoes an isothermal expansion at from to , where . Compare the exact work done by the gas to the work estimated by connecting the initial and final states with a straight line, given and .
Answer
Exact: . Linear approximation (trapezoid): . The straight chord overestimates the work under the convex curve by approximately .
A closed cycle consists of: (1) isobaric expansion at from to , (2) isochoric cooling to pressure , and (3) an isothermal compression at constant back to . Express the net work done per cycle in terms of and .
Answer
. Steps: ; ; . Summing gives .
A cyclic heat engine executes three steps: an isothermal expansion at temperature from to , an isochoric cooling to temperature , and an isobaric compression at returning to state . Given and , find and verify whether the engine does net positive work.
Answer
. Steps: ; (isochoric); . Net work , confirming positive net work.