Resources

A reconnaissance probe orbits an exoplanet in a stable circular path with an orbital speed of v=4.80×103 m/sv = 4.80 \times 10^3\text{ m/s}. The exoplanet has a mass of M=3.20×1024 kgM = 3.20 \times 10^{24}\text{ kg} and a radius of R=5.10×106 mR = 5.10 \times 10^6\text{ m}. Take G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2. Calculate (a) the altitude hh of the probe above the exoplanet's surface, and (b) the local gravitational field strength gg experienced by the probe at this orbital radius.

Answer and steps

Final answer

(a) h=4.17×106 mh = 4.17 \times 10^6\text{ m}; (b) g=2.48 m/s2g = 2.48\text{ m/s}^2

Steps

Part (a): Determining the Altitude hh

  1. Relate gravitational force to centripetal acceleration
    For a probe of mass mm in a stable circular orbit around an exoplanet of mass MM, the gravitational force provides the necessary centripetal force: GMmr2=mv2r\frac{G M m}{r^2} = \frac{m v^2}{r} where:

    • G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2 is the universal gravitational constant,
    • rr is the orbital radius measured from the center of the exoplanet,
    • v=4.80×103 m/sv = 4.80 \times 10^3\text{ m/s} is the probe's orbital speed.
  2. Solve for the orbital radius rr
    Canceling the probe's mass mm and one factor of rr yields: v2=GMr  ⟹  r=GMv2v^2 = \frac{GM}{r} \implies r = \frac{GM}{v^2}

    Substitute the given values: r=(6.674×10−11 N⋅m2/kg2)(3.20×1024 kg)(4.80×103 m/s)2r = \frac{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(3.20 \times 10^{24}\text{ kg})}{(4.80 \times 10^3\text{ m/s})^2} r=2.1357×1014 m3/s22.304×107 m2/s2≈9.27×106 mr = \frac{2.1357 \times 10^{14}\text{ m}^3/\text{s}^2}{2.304 \times 10^7\text{ m}^2/\text{s}^2} \approx 9.27 \times 10^6\text{ m}

  3. Calculate the altitude hh above the surface
    Common Pitfall: The calculated radius rr is the distance from the center of the planet, not from its surface. The altitude hh is found by subtracting the planet's radius RR: h=r−Rh = r - R h=9.27×106 m−5.10×106 m=4.17×106 mh = 9.27 \times 10^6\text{ m} - 5.10 \times 10^6\text{ m} = 4.17 \times 10^6\text{ m}

Part (b): Determining the Local Gravitational Field Strength gg

  1. Apply the definition of gravitational field strength
    The gravitational field strength at distance rr from the center of mass MM is: g=GMr2g = \frac{GM}{r^2} Alternatively, because the gravitational acceleration equals the centripetal acceleration in a circular orbit: g=v2rg = \frac{v^2}{r}
  2. Compute the numerical value
    Using the values v=4.80×103 m/sv = 4.80 \times 10^3\text{ m/s} and r≈9.27×106 mr \approx 9.27 \times 10^6\text{ m}: g=(4.80×103 m/s)29.27×106 m=2.304×107 m2/s29.27×106 m≈2.48 m/s2g = \frac{(4.80 \times 10^3\text{ m/s})^2}{9.27 \times 10^6\text{ m}} = \frac{2.304 \times 10^7\text{ m}^2/\text{s}^2}{9.27 \times 10^6\text{ m}} \approx 2.48\text{ m/s}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the orbital radius from the center of the planet but forgets to subtract the planet's radius to find altitude, reporting the orbital radius as the altitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    G⋅M/r=v2  ⟹  r=G⋅M/v2=6.674×10−11×3.20×1024(4.80×103)2=9.27×106 mG \cdot M / r = v^2 \implies r = G \cdot M / v^2 = \frac{6.674 \times 10^{-11} \times 3.20 \times 10^{24}}{(4.80 \times 10^3)^2} = 9.27 \times 10^6\text{ m}

  2. Step 2

    h=9.27×106 mh = 9.27 \times 10^6\text{ m}

    Correct

    h=r−R=9.27×106 m−5.10×106 m=4.17×106 mh = r - R = 9.27 \times 10^6\text{ m} - 5.10 \times 10^6\text{ m} = 4.17 \times 10^6\text{ m}

    You equated altitude hh directly to the orbital radius rr. Altitude is measured from the surface of the planet, so you must subtract the planetary radius RR from the orbital radius rr.

  3. Step 3

    g=G⋅M/r2=6.674×10−11×3.20×1024(9.27×106)2=2.49 N/kgg = G \cdot M / r^2 = \frac{6.674 \times 10^{-11} \times 3.20 \times 10^{24}}{(9.27 \times 10^6)^2} = 2.49\text{ N/kg}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the relationship between orbital speed and radius from Newton's law of universal gravitation.

You performed the numerical substitution and calculation for orbital radius rr accurately.

You applied the correct distance rr from the planet's center to find the local gravitational field strength gg.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radius vs. Altitude Confusion

You equated the altitude hh to the orbital radius rr without subtracting the planet's radius RR.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating orbital radius (rr, measured from the center of mass) with altitude (hh, measured from the surface).

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish $r$ from $h$
  • r=R+hr = R + h, where rr is the orbital radius from the center, RR is the planet's radius, and hh is the altitude above the surface.

  • Whenever a question asks for altitude, write h=r−Rh = r - R before plugging in numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the geometric relationship between orbital radius rr, planetary radius RR, and altitude hh: r=R+hr = R + h.

  2. Rearrange for altitude: h=r−Rh = r - R.

  3. Substitute r=9.27×106 mr = 9.27 \times 10^6\text{ m} and R=5.10×106 mR = 5.10 \times 10^6\text{ m}: h=9.27×106 m−5.10×106 m=4.17×106 mh = 9.27 \times 10^6\text{ m} - 5.10 \times 10^6\text{ m} = 4.17 \times 10^6\text{ m}.

Final answer

(a) h=4.17×106 mh = 4.17 \times 10^6\text{ m}; (b) g=2.48 m/s2g = 2.48\text{ m/s}^2 (or 2.49 N/kg2.49\text{ N/kg})

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick diagram showing the planet's center, surface, and orbit whenever gravitation problems mention altitude.

  • Label RR (center to surface), hh (surface to orbit), and rr (center to orbit) to avoid confusing rr with hh.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the orbital speed when calculating the orbital radius from centripetal acceleration, leading to an incorrect radius, altitude, and gravitational field strength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    GMr2=vr  ⟹  r=GMv\frac{G M}{r^2} = \frac{v}{r} \implies r = \frac{G M}{v}

    Correct

    GMmr2=mv2r  ⟹  GMr2=v2r  ⟹  r=GMv2\frac{G M m}{r^2} = \frac{m v^2}{r} \implies \frac{G M}{r^2} = \frac{v^2}{r} \implies r = \frac{G M}{v^2}

    Centripetal acceleration for circular motion is ac=v2ra_c = \frac{v^2}{r}, not vr\frac{v}{r}. Forgetting to square the orbital speed vv results in an incorrect algebraic expression for the orbital radius rr.

  2. Step 2

    r=6.674×10−11×3.20×10244.80×103=4.45×1010 mr = \frac{6.674 \times 10^{-11} \times 3.20 \times 10^{24}}{4.80 \times 10^3} = 4.45 \times 10^{10}\text{ m}

    Correct

    r=6.674×10−11×3.20×1024(4.80×103)2≈9.27×106 mr = \frac{6.674 \times 10^{-11} \times 3.20 \times 10^{24}}{(4.80 \times 10^3)^2} \approx 9.27 \times 10^6\text{ m}

    Your arithmetic matches your formula from Step 1, but the value is incorrect because vv was not squared in the denominator.

  3. Step 3

    h=r−R=4.45×1010 m−5.10×106 m=4.45×1010 mh = r - R = 4.45 \times 10^{10}\text{ m} - 5.10 \times 10^6\text{ m} = 4.45 \times 10^{10}\text{ m}

    Correct

    h=r−R=9.27×106 m−5.10×106 m=4.17×106 mh = r - R = 9.27 \times 10^6\text{ m} - 5.10 \times 10^6\text{ m} = 4.17 \times 10^6\text{ m}

    You correctly recognized that altitude hh is found by subtracting the planet's radius RR from the orbital radius rr, but your result carries forward the incorrect radius from Step 2.

  4. Step 4

    g=GMr2=6.674×10−11×3.20×1024(4.45×1010)2=1.08×10−7 N/kgg = \frac{G M}{r^2} = \frac{6.674 \times 10^{-11} \times 3.20 \times 10^{24}}{(4.45 \times 10^{10})^2} = 1.08 \times 10^{-7}\text{ N/kg}

    Correct

    g=GMr2=v2r=(4.80×103)29.27×106≈2.48 m/s2g = \frac{G M}{r^2} = \frac{v^2}{r} = \frac{(4.80 \times 10^3)^2}{9.27 \times 10^6} \approx 2.48\text{ m/s}^2

    You correctly applied the definition of gravitational field strength g=GMr2g = \frac{GM}{r^2}, but substituting the incorrect orbital radius led to an erroneous final field strength.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that gravity provides the necessary centripetal force for circular orbital motion.

You correctly related altitude to orbital radius and planetary radius using h=r−Rh = r - R.

You correctly applied the formula for local gravitational field strength, g=GMr2g = \frac{GM}{r^2}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted exponent in centripetal acceleration

Writing ac=vra_c = \frac{v}{r} instead of ac=v2ra_c = \frac{v^2}{r} when setting up Newton's second law for uniform circular motion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating centripetal acceleration (ac=v2r=ω2r=vωa_c = \frac{v^2}{r} = \omega^2 r = v\omega) with angular velocity expressions or dimensional ratios, leaving vv unsquared.

REASONING PATH
Your ACEpath teacher’s suggested approach
Centripetal Acceleration Formula
  • Centripetal acceleration is ac=v2ra_c = \frac{v^2}{r}, with units of m/s2\text{m/s}^2.

  • Always verify units: vr\frac{v}{r} has units of 1/s1/\text{s} (angular frequency), whereas v2r\frac{v^2}{r} has units of m/s2\text{m/s}^2 (acceleration).

Solving for Orbital Radius
  • Equating GMr2=v2r\frac{GM}{r^2} = \frac{v^2}{r} yields r=GMv2r = \frac{GM}{v^2}.

  • Double-check that the speed term in the denominator is squared whenever solving for orbital radius from orbital speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set gravitational acceleration equal to centripetal acceleration: GMr2=v2r\frac{GM}{r^2} = \frac{v^2}{r}.

  2. Solve for rr: r=GMv2=(6.674×10−11)(3.20×1024)(4.80×103)2≈9.27×106 mr = \frac{GM}{v^2} = \frac{(6.674 \times 10^{-11})(3.20 \times 10^{24})}{(4.80 \times 10^3)^2} \approx 9.27 \times 10^6\text{ m}.

  3. Calculate the altitude: h=r−R=9.27×106 m−5.10×106 m=4.17×106 mh = r - R = 9.27 \times 10^6\text{ m} - 5.10 \times 10^6\text{ m} = 4.17 \times 10^6\text{ m}.

  4. Calculate the local field strength: g=v2r=(4.80×103)29.27×106≈2.48 m/s2g = \frac{v^2}{r} = \frac{(4.80 \times 10^3)^2}{9.27 \times 10^6} \approx 2.48\text{ m/s}^2.

Final answer

(a) h=4.17×106 mh = 4.17 \times 10^6\text{ m}; (b) g=2.48 m/s2g = 2.48\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the key formulas for uniform circular motion: ac=v2r=ω2ra_c = \frac{v^2}{r} = \omega^2 r.

  • Perform a quick dimensional check whenever deriving equations to catch missing powers of vv or rr.

  • Solve follow-up orbital mechanics problems involving circular speed, radius, and gravitational acceleration.

OverviewACEpath Teacher's Diagnosis

03 The student correctly finds the orbital radius and altitude in the first part, but uses the surface radius R instead of the orbital radius r when calculating the local gravitational field strength experienced by the probe.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r=G∗M/v2  ⟹  r=(6.674×10−11×3.20×1024)/(4.80×103)2=9.27×106 mr = G * M / v^2 \implies r = (6.674 \times 10^{-11} \times 3.20 \times 10^{24}) / (4.80 \times 10^3)^2 = 9.27 \times 10^6\text{ m}

  2. Step 2

    h=r−R  ⟹  h=9.27×106−5.10×106=4.17×106 mh = r - R \implies h = 9.27 \times 10^6 - 5.10 \times 10^6 = 4.17 \times 10^6\text{ m}

  3. Step 3

    g=G∗M/R2  ⟹  g=(6.674×10−11×3.20×1024)/(5.10×106)2=8.21 N/kgg = G * M / R^2 \implies g = (6.674 \times 10^{-11} \times 3.20 \times 10^{24}) / (5.10 \times 10^6)^2 = 8.21\text{ N/kg}

    Correct

    g=GMr2=(6.674×10−11 N⋅m2/kg2)(3.20×1024 kg)(9.27×106 m)2≈2.48 m/s2g = \frac{GM}{r^2} = \frac{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(3.20 \times 10^{24}\text{ kg})}{(9.27 \times 10^6\text{ m})^2} \approx 2.48\text{ m/s}^2

    You substituted the planet's surface radius R=5.10×106 mR = 5.10 \times 10^6\text{ m} into the formula instead of the probe's distance from the center, which is the orbital radius r=9.27×106 mr = 9.27 \times 10^6\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the orbital speed to the gravitational constant and planetary mass to find the total orbital radius.

You clearly distinguished between the orbital radius from the center and the altitude above the surface in part (a).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radius substitution error in field formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the surface radius RR with the distance rr from the planet's center to the probe when evaluating the gravitational field strength.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate location for field strength
  • The gravitational field strength at any point at distance rr from the center of a spherically symmetric mass MM is g(r)=GMr2g(r) = \frac{GM}{r^2}.

  • Always verify whether the problem asks for the field strength on the surface (r=Rr = R) or at the position of the orbiting object (r=R+hr = R + h).

Use centripetal acceleration shortcut
  • For a circular orbit, the gravitational field strength provides the entire centripetal acceleration: g=ac=v2rg = a_c = \frac{v^2}{r}.

  • Use g=v2rg = \frac{v^2}{r} directly with the given orbital velocity to avoid recalculating with GG and MM.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the formula for gravitational field strength at distance rr: g=GMr2g = \frac{GM}{r^2} (or equivalently, g=v2rg = \frac{v^2}{r}).

  2. Substitute r=9.27×106 mr = 9.27 \times 10^6\text{ m}: g=(4.80×103 m/s)29.27×106 m=2.304×1079.27×106≈2.48 m/s2g = \frac{(4.80 \times 10^3\text{ m/s})^2}{9.27 \times 10^6\text{ m}} = \frac{2.304 \times 10^7}{9.27 \times 10^6} \approx 2.48\text{ m/s}^2.

Final answer

g=2.48 m/s2g = 2.48\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between planet radius RR, altitude hh, and orbital radius r=R+hr = R + h.

  • Practice using g=v2rg = \frac{v^2}{r} for circular orbits as a quick calculation and sanity check.

Lock it in

Similar question

01

A weather satellite orbits Earth (M=5.97×1024 kgM = 5.97 \times 10^{24}\text{ kg}, R=6.37×106 mR = 6.37 \times 10^6\text{ m}) at an orbital radius of r=7.17×106 mr = 7.17 \times 10^6\text{ m}. Calculate its altitude hh above Earth's surface.

Answer

h=8.00×105 mh = 8.00 \times 10^5\text{ m} (800 km800\text{ km}). Subtract the radius of Earth from the orbital radius: h=r−R=7.17×106 m−6.37×106 m=8.00×105 mh = r - R = 7.17 \times 10^6\text{ m} - 6.37 \times 10^6\text{ m} = 8.00 \times 10^5\text{ m}.

02

A communications satellite orbits a planet of mass M=4.00×1023 kgM = 4.00 \times 10^{23}\text{ kg} and radius R=2.40×106 mR = 2.40 \times 10^6\text{ m} at a constant speed of v=2.00×103 m/sv = 2.00 \times 10^3\text{ m/s}. Find its altitude hh above the planet's surface. Take G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2.

Answer

h=4.27×106 mh = 4.27 \times 10^6\text{ m}. First find the orbital radius: r=GMv2=(6.674×10−11)(4.00×1023)(2.00×103)2=6.674×106 mr = \frac{GM}{v^2} = \frac{(6.674 \times 10^{-11})(4.00 \times 10^{23})}{(2.00 \times 10^3)^2} = 6.674 \times 10^6\text{ m}. Then subtract the planet's radius: h=r−R=6.674×106 m−2.40×106 m≈4.27×106 mh = r - R = 6.674 \times 10^6\text{ m} - 2.40 \times 10^6\text{ m} \approx 4.27 \times 10^6\text{ m}.

03

A probe moves in a circular orbit around a spherical moon where the gravitational field strength at orbital height is g=0.80 m/s2g = 0.80\text{ m/s}^2. The moon has mass M=7.20×1022 kgM = 7.20 \times 10^{22}\text{ kg} and radius R=1.74×106 mR = 1.74 \times 10^6\text{ m}. Determine both the probe's altitude hh and its orbital speed vv. Take G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2.

Answer

h=7.1×105 mh = 7.1 \times 10^5\text{ m}, v=1.40×103 m/sv = 1.40 \times 10^3\text{ m/s}. Since g=GMr2g = \frac{GM}{r^2}, orbital radius is r=GMg=(6.674×10−11)(7.20×1022)0.80≈2.451×106 mr = \sqrt{\frac{GM}{g}} = \sqrt{\frac{(6.674 \times 10^{-11})(7.20 \times 10^{22})}{0.80}} \approx 2.451 \times 10^6\text{ m}. Altitude is h=r−R=2.451×106−1.74×106≈7.1×105 mh = r - R = 2.451 \times 10^6 - 1.74 \times 10^6 \approx 7.1 \times 10^5\text{ m}. Orbital speed is v=gr=0.80×2.451×106≈1.40×103 m/sv = \sqrt{g r} = \sqrt{0.80 \times 2.451 \times 10^6} \approx 1.40 \times 10^3\text{ m/s}.

Loading workspace…