Resources

A hydraulic vehicle lift raises a car of mass M=1850 kgM = 1850\text{ kg} through a vertical distance of y=2.10 my = 2.10\text{ m} at constant velocity. The lift mechanism operates with an efficiency of η=78.5%\eta = 78.5\%. In the hydraulic cylinder, the input piston is driven by an applied input force of Fin=650 NF_{\text{in}} = 650\text{ N}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the total stroke distance dind_{\text{in}} through which the input piston must be displaced to complete this lift.

Answer and steps

Final answer

din=74.6 md_{\text{in}} = 74.6\text{ m}

Steps

01

Calculate the useful work output (WoutW_{\text{out}})

To find the required displacement dind_{\text{in}} of the input piston, we determine the useful work done on the car, apply the definition of mechanical efficiency to find the total work input, and then solve for the input distance.

Because the car is lifted at a constant velocity, the net vertical force is zero. Therefore, the lifting force exerted by the output piston equals the gravitational force on the vehicle:

Fout=MgF_{\text{out}} = M g

Substituting the given values:

Fout=(1850 kg)(9.80 m/s2)=18130 NF_{\text{out}} = (1850\text{ kg})(9.80\text{ m/s}^2) = 18130\text{ N}

The useful work output WoutW_{\text{out}} equals the work done against gravity to raise the vehicle by a height y=2.10 my = 2.10\text{ m}:

Wout=Fouty=(18130 N)(2.10 m)=38073 JW_{\text{out}} = F_{\text{out}} y = (18130\text{ N})(2.10\text{ m}) = 38073\text{ J}


02

Relate work output to work input via efficiency

Mechanical efficiency η\eta is defined as the ratio of useful work output to total work input:

η=WoutWin\eta = \frac{W_{\text{out}}}{W_{\text{in}}}

Rearranging to solve for the input work WinW_{\text{in}}:

Win=WoutηW_{\text{in}} = \frac{W_{\text{out}}}{\eta}

Given that η=78.5%=0.785\eta = 78.5\% = 0.785:

Win=38073 J0.785≈48500.64 JW_{\text{in}} = \frac{38073\text{ J}}{0.785} \approx 48500.64\text{ J}

Common Pitfall: Be careful not to multiply WoutW_{\text{out}} by η\eta. Real mechanical systems have losses (such as fluid friction and mechanical drag), so the input energy must always be greater than the useful output energy (Win>WoutW_{\text{in}} > W_{\text{out}}).


03

Determine the input displacement (dind_{\text{in}})

The work input is provided by applying a constant force Fin=650 NF_{\text{in}} = 650\text{ N} along the direction of displacement:

Win=FindinW_{\text{in}} = F_{\text{in}} d_{\text{in}}

Solving for dind_{\text{in}}:

din=WinFin=48500.64 J650 N≈74.616 md_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} = \frac{48500.64\text{ J}}{650\text{ N}} \approx 74.616\text{ m}

Rounding to three significant figures gives:

din=74.6 md_{\text{in}} = 74.6\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies by efficiency instead of dividing by efficiency when computing the required input work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Wout=M⋅g⋅y=1850⋅9.80⋅2.10=38073 JW_{\text{out}} = M \cdot g \cdot y = 1850 \cdot 9.80 \cdot 2.10 = 38073\text{ J}

  2. Step 2

    Win=η⋅Wout=0.785⋅38073=29887.3 JW_{\text{in}} = \eta \cdot W_{\text{out}} = 0.785 \cdot 38073 = 29887.3\text{ J}

    Correct

    Win=Woutη=38073 J0.785≈48500.64 JW_{\text{in}} = \frac{W_{\text{out}}}{\eta} = \frac{38073\text{ J}}{0.785} \approx 48500.64\text{ J}

    Mechanical efficiency is defined as η=WoutWin\eta = \frac{W_{\text{out}}}{W_{\text{in}}}. Rearranging for input work requires dividing by efficiency (Win=WoutηW_{\text{in}} = \frac{W_{\text{out}}}{\eta}), which accounts for losses and makes Win>WoutW_{\text{in}} > W_{\text{out}}.

  3. Step 3

    din=WinFin=29887.3650=46.0 md_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} = \frac{29887.3}{650} = 46.0\text{ m}

    Correct

    din=WinFin=48500.64 J650 N≈74.6 md_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} = \frac{48500.64\text{ J}}{650\text{ N}} \approx 74.6\text{ m}

    Your formula din=WinFind_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} and division were carried out correctly, but the numerical result is affected by the incorrect value of WinW_{\text{in}} from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the useful output work as the gravitational potential energy gained by the car.

You correctly related input work, input force, and piston displacement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Efficiency Inversion Error

You multiplied the output work by 0.7850.785 rather than dividing by 0.7850.785, yielding an input work smaller than the output work.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating output and input work when rearranging the efficiency ratio η=WoutWin\eta = \frac{W_{\text{out}}}{W_{\text{in}}}. For any real system where η<1\eta < 1, input energy must be strictly greater than useful output energy due to dissipated energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity Check Energy Magnitude
  • In any real machine with η<100%\eta < 100\%, Win>WoutW_{\text{in}} > W_{\text{out}} because energy is lost to friction.

  • Before calculating, check whether your target value should be larger or smaller than your starting value.

Isolate Input from Efficiency
  • η=WoutWin  ⟹  Win=Woutη\eta = \frac{W_{\text{out}}}{W_{\text{in}}} \implies W_{\text{in}} = \frac{W_{\text{out}}}{\eta}

  • Write out the ratio definition explicitly and cross-multiply before substituting numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the correct efficiency relation: Win=Woutη=38073 J0.785≈48500.64 JW_{\text{in}} = \frac{W_{\text{out}}}{\eta} = \frac{38073\text{ J}}{0.785} \approx 48500.64\text{ J}.

  2. Substitute WinW_{\text{in}} into the displacement formula: din=WinFin=48500.64 J650 N≈74.616 md_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} = \frac{48500.64\text{ J}}{650\text{ N}} \approx 74.616\text{ m}.

Final answer

din=74.6 md_{\text{in}} = 74.6\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a physical sanity check on efficiency problems: verify that Win>WoutW_{\text{in}} > W_{\text{out}}.

  • Practice rearranging η=useful outputtotal input\eta = \frac{\text{useful output}}{\text{total input}} for both output and input quantities.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the lift mechanism efficiency and assumes an ideal hydraulic machine with 100% efficiency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Wout=1850×9.80×2.10=38073 JW_{\text{out}} = 1850 \times 9.80 \times 2.10 = 38073\text{ J}

  2. Step 2

    Win=Wout=38073 JW_{\text{in}} = W_{\text{out}} = 38073\text{ J}

    Correct

    Win=Woutη=38073 J0.785≈48501 JW_{\text{in}} = \frac{W_{\text{out}}}{\eta} = \frac{38073\text{ J}}{0.785} \approx 48501\text{ J}

    You assumed an ideal machine with 100%100\% efficiency. With an efficiency of η=78.5%\eta = 78.5\%, the required input work must satisfy η=WoutWin\eta = \frac{W_{\text{out}}}{W_{\text{in}}}, meaning Win=Wout0.785W_{\text{in}} = \frac{W_{\text{out}}}{0.785}.

  3. Step 3

    din=38073650=58.6 md_{\text{in}} = \frac{38073}{650} = 58.6\text{ m}

    Correct

    din=WinFin=48501 J650 N≈74.6 md_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} = \frac{48501\text{ J}}{650\text{ N}} \approx 74.6\text{ m}

    You correctly related work to force and displacement using din=WinFind_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}}, but the result was affected by the incorrect value of WinW_{\text{in}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the gravitational force acting on the car and computed the useful output work.

You used the correct relationship between work, force, and displacement to solve for distance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignored Mechanical Efficiency

This was a conceptual omission rather than a calculation slip because you assumed Win=WoutW_{\text{in}} = W_{\text{out}}, completely bypassing the efficiency η=78.5%\eta = 78.5\%.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the hydraulic lift as an ideal machine (100%100\% efficient) rather than accounting for mechanical and fluid friction losses via η=WoutWin\eta = \frac{W_{\text{out}}}{W_{\text{in}}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Efficiency
  • η=WoutWin\eta = \frac{W_{\text{out}}}{W_{\text{in}}}, which means Win=WoutηW_{\text{in}} = \frac{W_{\text{out}}}{\eta}.

  • Always verify that your input work is strictly greater than your output work when η<100%\eta < 100\%.

Accounting for Given Specifications
  • Every efficiency rating strictly less than 11 means extra work must be supplied to overcome losses.

  • Divide the required output work by the fractional efficiency before calculating the input stroke distance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the efficiency formula: Win=Woutη=38073 J0.785≈48500.64 JW_{\text{in}} = \frac{W_{\text{out}}}{\eta} = \frac{38073\text{ J}}{0.785} \approx 48500.64\text{ J}.

  2. Solve for the piston displacement: din=WinFin=48500.64 J650 N≈74.6 md_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} = \frac{48500.64\text{ J}}{650\text{ N}} \approx 74.6\text{ m}.

Final answer

din=74.6 md_{\text{in}} = 74.6\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of mechanical efficiency as η=useful outputtotal input\eta = \frac{\text{useful output}}{\text{total input}}.

  • Practice identifying whether a question requires dividing by η\eta (to find input) or multiplying by η\eta (to find output).

  • Perform a reality check on work values: input energy must always exceed useful output energy in real mechanical systems.

OverviewACEpath Teacher's Diagnosis

03 The student omits the acceleration due to gravity g, confusing mass with output force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Wout=M∗y=1850∗2.10=3885 JW_{\text{out}} = M * y = 1850 * 2.10 = 3885\text{ J}

    Correct

    Wout=Mgy=(1850 kg)(9.80 m/s2)(2.10 m)=38073 JW_{\text{out}} = M g y = (1850\text{ kg})(9.80\text{ m/s}^2)(2.10\text{ m}) = 38073\text{ J}

    You multiplied mass directly by vertical distance. Work done against gravity requires the gravitational force (weight) F=MgF = Mg, so you must include g=9.80 m/s2g = 9.80\text{ m/s}^2.

  2. Step 2

    Win=38850.785=4949 JW_{\text{in}} = \frac{3885}{0.785} = 4949\text{ J}

    Correct

    Win=Woutη=38073 J0.785≈48501 JW_{\text{in}} = \frac{W_{\text{out}}}{\eta} = \frac{38073\text{ J}}{0.785} \approx 48501\text{ J}

    Your formula η=WoutWin\eta = \frac{W_{\text{out}}}{W_{\text{in}}} and rearrangement to Win=WoutηW_{\text{in}} = \frac{W_{\text{out}}}{\eta} are completely correct, but the numerical result is affected by the missing factor of gg from Step 1.

  3. Step 3

    din=4949650=7.61 md_{\text{in}} = \frac{4949}{650} = 7.61\text{ m}

    Correct

    din=WinFin=48501 J650 N≈74.6 md_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} = \frac{48501\text{ J}}{650\text{ N}} \approx 74.6\text{ m}

    Your method of dividing input work by input force is correct, but your final answer is off by a factor of gg due to the earlier mistake.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related efficiency to input work and useful work output using Win=WoutηW_{\text{in}} = \frac{W_{\text{out}}}{\eta}.

You correctly applied the work definition Win=FindinW_{\text{in}} = F_{\text{in}} d_{\text{in}} to solve for the displacement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted gravity when calculating lifting work

No, this is a conceptual confusion between mass (MM, in kg\text{kg}) and weight/force (F=MgF = Mg, in N\text{N}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated mass as the lifting force instead of multiplying by gg to find the gravitational force (weight). Work is force times distance (W=Fy=MgyW = F y = M g y), not mass times distance.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mass vs. Weight Check
  • Mass (in kg\text{kg}) is a scalar measure of inertia, while weight (in N\text{N}) is the gravitational force Fg=mgF_g = mg.

  • Whenever an object is raised vertically against gravity at constant speed, always write Flift=MgF_{\text{lift}} = Mg before calculating work.

Dimensional Consistency Check
  • Work has units of Joules (J=N⋅m=kg⋅m2/s2\text{J} = \text{N}\cdot\text{m} = \text{kg}\cdot\text{m}^2/\text{s}^2).

  • Verify that multiplying your quantities produces Joules: kg×m≠J\text{kg} \times \text{m} \neq \text{J}, whereas kg×(m/s2)×m=J\text{kg} \times (\text{m/s}^2) \times \text{m} = \text{J}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Wout=Mgy=(1850 kg)(9.80 m/s2)(2.10 m)=38073 JW_{\text{out}} = M g y = (1850\text{ kg})(9.80\text{ m/s}^2)(2.10\text{ m}) = 38073\text{ J}

  2. Win=Woutη=38073 J0.785≈48500.64 JW_{\text{in}} = \frac{W_{\text{out}}}{\eta} = \frac{38073\text{ J}}{0.785} \approx 48500.64\text{ J}

  3. din=WinFin=48500.64 J650 N≈74.6 md_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} = \frac{48500.64\text{ J}}{650\text{ N}} \approx 74.6\text{ m}

Final answer

din=74.6 md_{\text{in}} = 74.6\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the force expression F=mgF = mg explicitly before multiplying by height to compute gravitational work.

  • Perform unit checks on your intermediate steps to ensure your work quantities are genuinely in Joules.

Lock it in

Similar question

01

An electric winch with an efficiency of 65%65\% lifts a 120 kg120\text{ kg} crate through a vertical height of 4.0 m4.0\text{ m} at constant speed (g=9.80 m/s2g = 9.80\text{ m/s}^2). Calculate the electrical energy input required by the motor.

Answer

Wout=mgh=(120)(9.80)(4.0)=4704 JW_{\text{out}} = mgh = (120)(9.80)(4.0) = 4704\text{ J}. Win=Woutη=4704 J0.65≈7240 JW_{\text{in}} = \frac{W_{\text{out}}}{\eta} = \frac{4704\text{ J}}{0.65} \approx 7240\text{ J} (or 7.24 kJ7.24\text{ kJ}).

02

A hydraulic press has an efficiency of 82.0%82.0\%. To crush a sample, the output piston delivers an average force of 24.0 kN24.0\text{ kN} over a distance of 3.50 cm3.50\text{ cm}. If the operator applies an input force of 450 N450\text{ N}, what total stroke distance must the input handle travel?

Answer

Wout=Foutdout=(24000 N)(0.0350 m)=840 JW_{\text{out}} = F_{\text{out}} d_{\text{out}} = (24000\text{ N})(0.0350\text{ m}) = 840\text{ J}. Win=Woutη=840 J0.820≈1024.39 JW_{\text{in}} = \frac{W_{\text{out}}}{\eta} = \frac{840\text{ J}}{0.820} \approx 1024.39\text{ J}. din=WinFin=1024.39 J450 N≈2.28 md_{\text{in}} = \frac{W_{\text{in}}}{F_{\text{in}}} = \frac{1024.39\text{ J}}{450\text{ N}} \approx 2.28\text{ m}.

03

A pump lifts water from an underground reservoir at a rate of 15.0 kg/s15.0\text{ kg/s} through a vertical elevation of 18.0 m18.0\text{ m} (g=9.80 m/s2g = 9.80\text{ m/s}^2). Due to internal friction and fluid drag, the pump operates at an efficiency of 72.0%72.0\%. Determine the electrical power input required to drive the pump.

Answer

Pout=(mt)gh=(15.0 kg/s)(9.80 m/s2)(18.0 m)=2646 WP_{\text{out}} = \left(\frac{m}{t}\right) g h = (15.0\text{ kg/s})(9.80\text{ m/s}^2)(18.0\text{ m}) = 2646\text{ W}. Pin=Poutη=2646 W0.720=3675 W=3.68 kWP_{\text{in}} = \frac{P_{\text{out}}}{\eta} = \frac{2646\text{ W}}{0.720} = 3675\text{ W} = 3.68\text{ kW}.

Loading workspace…