Resources
A warehouse worker pushes a crate of mass along a horizontal concrete floor by applying a constant pulling force of magnitude via a light rope. The rope makes an angle of above the horizontal. The coefficient of kinetic friction between the crate and the floor is . The crate moves a horizontal distance of . Taking the acceleration due to gravity as , calculate: (a) the work done by the applied tension force , (b) the work done by the kinetic friction force , and (c) the net work done on the crate .
Answer and steps
Final answer
(a) ; (b) ; (c) .
Steps
Part (a): Work Done by the Applied Force
The work done by a constant force over a straight-line displacement is defined as: where is the angle between the direction of the force and the direction of displacement.
Given:
- Force magnitude:
- Angle above the horizontal:
- Horizontal displacement:
Substitute the values:
Part (b): Work Done by Kinetic Friction
Kinetic friction depends on the normal force . Because the pulling force has an upward vertical component, it partially relieves the crate's weight on the floor.
-
Determine the Normal Force : Since there is no vertical acceleration (), the vertical forces must balance:
Calculate the weight and the upward vertical component :
Therefore:
Common Pitfall: Do not assume . When a pulling force has an upward angle, it reduces the normal force, which in turn reduces the friction force.
- Calculate the Kinetic Friction Force :
- Calculate the Work Done by Friction : Kinetic friction acts opposite to the direction of motion (, so ):
Part (c): Net Work Done on the Crate
The normal force and gravity act perpendicular to the horizontal displacement (), so they do zero work (, ).
The total (net) work is the algebraic sum of the work done by all individual forces:
Typical errors
01 The student forgets that the upward component of the tension reduces the normal force, setting N = mg instead.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You set , but the tension pulls upward at an angle . The vertical component helps support the crate, reducing the normal force exerted by the floor.
- Step 3Correct
Your formulas for friction force and work done by friction are correct, but your calculation carries over the incorrect normal force from Step 2.
- Step 4Correct
You correctly summed the work done by all acting forces, but the result is affected by the incorrect value of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used to find the work done by the pulling force.
You recognized that kinetic friction acts opposite to displacement, giving negative work.
You correctly combined the individual work quantities to calculate the net work.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that the normal force on a horizontal surface is always equal to , failing to set up a vertical equilibrium equation () when an applied force has a non-zero vertical component.
REASONING PATH
Your ACEpath teacher’s suggested approach- Vertical Force Balance
Whenever external forces act at an angle, always write out to solve for the normal force .
Draw a quick free-body diagram and check whether any applied force has an upward () or downward () component before computing .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up vertical equilibrium:
Substitute values:
Compute friction force:
Compute work by friction:
Calculate net work:
(a) ; (b) ; (c)
02 The student omits the negative sign for work done by friction, treating friction work as positive.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Kinetic friction points opposite to the crate's forward motion, making the angle between friction and displacement . Since , the work done by friction must be negative.
- Step 4Correct
Your formula for net work is conceptually sound as a sum of work terms, but substituting the positive value for rather than led to an incorrect total.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the work done by the applied tension force.
You recognized that the upward angle of the tension force reduces the normal force and accurately computed .
You correctly determined the magnitude of the kinetic friction force using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the work done by kinetic friction as a positive quantity by using instead of accounting for the angle between friction and displacement.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating force magnitude with the directional definition of work, overlooking that forces opposing displacement remove mechanical energy from the object and do negative work ( with ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Direction of Friction vs. Displacement
The work done by a constant force is , where is the angle between the force vector and the displacement vector.
Whenever a force acts directly opposite the motion, set , giving and .
- Energy Sanity Check on Net Work
Net work equals the change in kinetic energy: .
Check whether friction should slow the object down or resist acceleration; resistive forces must subtract from, not add to, the energy supplied by the pulling force.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b) ; (c)
03 The student adds the vertical component of the tension to gravity instead of subtracting it when determining the normal force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the pulling force points above the horizontal, its vertical component pulls upward along with the normal force. In equilibrium, , which means , reducing the normal force rather than increasing it.
- Step 3Correct
Your formulas for friction and work of friction were applied correctly, but the numerical result is shifted due to the incorrect normal force from Step 2.
- Step 4Correct
Your method of summing the individual work contributions was correct, but the total reflects the propagated error in .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the work done by the applied tension force using .
You recognized that friction does negative work on the crate.
You used the work-energy relation correctly by summing the individual work values to find the net work.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou added the upward vertical component of tension to gravity instead of subtracting it from gravity.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the normal force as the sum of all other vertical forces rather than drawing a free-body diagram where the two upward forces ( and ) balance the downward force of gravity ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Set Up Vertical Equilibrium
For an object on a horizontal surface with no vertical acceleration, . Forces pointing up take a positive sign, and forces pointing down take a negative sign: .
Always list forces by direction first before isolating . If a rope pulls upward and forward, .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the vertical force balance: .
Solve for the normal force: .
Calculate kinetic friction: .
Compute the work done by friction: .
Sum the works to find net work: .
(a) ; (b) ; (c) .
Lock it in
When a force pulls an object upward at an angle above the horizontal on a flat floor, what is the normal force ?
. The upward vertical component of the pull reduces how hard the floor must support the object.
Similar question
A block of mass is pulled along a rough horizontal floor by a force of angled at above the horizontal. If and , find the magnitude of the kinetic friction force .
Answer
.
- Find normal force: .
- Compute friction: .
A lawnmower of mass is pushed across a level lawn with a force of directed downward at an angle of below the horizontal. If the coefficient of kinetic friction is and , calculate the work done by friction when pushing the mower a distance of .
Answer
.
- Normal force accounts for downward push: .
- Friction force: .
- Work: .
A box is pulled a distance of across a horizontal surface by a rope with tension at an angle of above the horizontal. The surface has . Using , find the net work done on the box .
Answer
.
- Work by tension: .
- Normal force: .
- Friction work: .
- Net work: .