Resources

A massive uniform sign of mass M=36.0 kgM = 36.0\text{ kg} and width w=1.50 mw = 1.50\text{ m} hangs symmetrically beneath a uniform horizontal boom of mass mb=20.0 kgm_b = 20.0\text{ kg} and length L=2.00 mL = 2.00\text{ m}. The boom is attached to a vertical wall via a frictionless hinge at its left end and held horizontally by a steel cable attached at the boom's right end at an angle of θ=40.0∘\theta = 40.0^\circ above the horizontal. The sign hangs from two vertical hangers attached to the boom at x1=0.500 mx_1 = 0.500\text{ m} and x2=2.00 mx_2 = 2.00\text{ m} from the wall. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the horizontal component HxH_x and vertical component HyH_y of the reaction force exerted by the hinge on the boom.

Answer and steps

Final answer

Hx=485 NH_x = 485\text{ N}, Hy=142 NH_y = 142\text{ N} (acting upward)

Steps

01

Identify the Forces and Equilibrium Conditions

To find the reaction force components at the hinge, we treat the horizontal boom as the system in static equilibrium. The boom is subject to:

  • The downward gravitational force on the boom itself: Wb=mbg=(20.0 kg)(9.80 m/s2)=196.0 NW_b = m_b g = (20.0\text{ kg})(9.80\text{ m/s}^2) = 196.0\text{ N} acting at the boom's center of mass, xb=L2=1.00 mx_b = \frac{L}{2} = 1.00\text{ m} from the hinge.
  • The downward force due to the sign's weight: Ws=Mg=(36.0 kg)(9.80 m/s2)=352.8 NW_s = M g = (36.0\text{ kg})(9.80\text{ m/s}^2) = 352.8\text{ N} acting at the sign's center of gravity at xsign=1.75 mx_{\text{sign}} = 1.75\text{ m} from the hinge.
  • The tension T⃗\vec{T} from the cable attached at the right end (x=L=2.00 mx = L = 2.00\text{ m}), pulling up and to the left at an angle of θ=40.0∘\theta = 40.0^\circ above the horizontal. Its components are: Tx=Tcos⁡θ,Ty=Tsin⁡θT_x = T \cos\theta, \quad T_y = T \sin\theta
  • The reaction force exerted by the hinge at x=0x = 0, resolved into a horizontal component HxH_x (directed to the right to oppose TxT_x) and a vertical component HyH_y (assumed upward).

02

Rotational Equilibrium (Torque Balance)

Choose the hinge as the pivot point to eliminate the unknown reaction components HxH_x and HyH_y from the torque equation.

Setting the net torque about the hinge to zero (∑τ=0\sum \tau = 0), taking counterclockwise torques as positive: τcable−τboom−τsign=0\tau_{\text{cable}} - \tau_{\text{boom}} - \tau_{\text{sign}} = 0

(Tsin⁡θ)L=Wb(L2)+Ws xsign(T \sin\theta) L = W_b \left(\frac{L}{2}\right) + W_s \, x_{\text{sign}}

Substitute the known values: (Tsin⁡40.0∘)(2.00 m)=(196.0 N)(1.00 m)+(352.8 N)(1.75 m)(T \sin 40.0^\circ)(2.00\text{ m}) = (196.0\text{ N})(1.00\text{ m}) + (352.8\text{ N})(1.75\text{ m})

2.00sin⁡40.0∘⋅T=196.0 N⋅m+617.4 N⋅m=813.4 N⋅m2.00 \sin 40.0^\circ \cdot T = 196.0\text{ N}\cdot\text{m} + 617.4\text{ N}\cdot\text{m} = 813.4\text{ N}\cdot\text{m}

Solve for the cable tension TT: T=813.4 N⋅m2.00sin⁡40.0∘ m=813.41.2856≈632.7 NT = \frac{813.4\text{ N}\cdot\text{m}}{2.00 \sin 40.0^\circ\text{ m}} = \frac{813.4}{1.2856} \approx 632.7\text{ N}


03

Horizontal Force Equilibrium

For translational equilibrium in the horizontal direction (∑Fx=0\sum F_x = 0): Hx−Tcos⁡θ=0H_x - T \cos\theta = 0

Hx=Tcos⁡40.0∘=(632.7 N)cos⁡40.0∘≈485 NH_x = T \cos 40.0^\circ = (632.7\text{ N})\cos 40.0^\circ \approx 485\text{ N}

The horizontal reaction force is 485 N485\text{ N} directed away from the wall (to the right).


04

Vertical Force Equilibrium

For translational equilibrium in the vertical direction (∑Fy=0\sum F_y = 0): Hy+Tsin⁡θ−Wb−Ws=0H_y + T \sin\theta - W_b - W_s = 0

Hy=(Wb+Ws)−Tsin⁡40.0∘H_y = (W_b + W_s) - T \sin 40.0^\circ

Substitute the numerical values: Hy=(196.0 N+352.8 N)−(632.7 N)sin⁡40.0∘H_y = (196.0\text{ N} + 352.8\text{ N}) - (632.7\text{ N})\sin 40.0^\circ

Hy=548.8 N−406.7 N=142.1 N≈142 NH_y = 548.8\text{ N} - 406.7\text{ N} = 142.1\text{ N} \approx 142\text{ N}

Because Hy>0H_y > 0, the vertical reaction force acts upward with a magnitude of 142 N142\text{ N}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student mistakenly treats the entire mass of the sign as acting at the geometric center of the boom (1.00 m) instead of at the midpoint between the two hangers (1.25 m).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Wb=20.0×9.80=196 N  ⟹  Ws=36.0×9.80=352.8 NW_b = 20.0 \times 9.80 = 196\text{ N} \implies W_s = 36.0 \times 9.80 = 352.8\text{ N}

  2. Step 2

    Στ=T⋅sin⁡(40.0∘)⋅2.00−Wb⋅1.00−Ws⋅1.00=0  ⟹  T⋅(1.2856)−196−352.8=0  ⟹  T=548.8/1.2856=426.9 N\Sigma \tau = T \cdot \sin(40.0^\circ) \cdot 2.00 - W_b \cdot 1.00 - W_s \cdot 1.00 = 0 \implies T \cdot (1.2856) - 196 - 352.8 = 0 \implies T = 548.8 / 1.2856 = 426.9\text{ N}

    Correct

    Στ=(Tsin⁡40.0∘)(2.00 m)−Wb(1.00 m)−Ws(1.75 m)=0  ⟹  T=813.4 N⋅m2.00sin⁡40.0∘ m≈632.7 N\Sigma \tau = (T \sin 40.0^\circ)(2.00\text{ m}) - W_b(1.00\text{ m}) - W_s(1.75\text{ m}) = 0 \implies T = \frac{813.4\text{ N}\cdot\text{m}}{2.00\sin 40.0^\circ\text{ m}} \approx 632.7\text{ N}

    You used a lever arm of 1.00 m1.00\text{ m} for the sign's weight WsW_s, placing it at the center of the boom. The downward force of the sign acts at the sign's center of gravity (xsign=1.75 mx_{\text{sign}} = 1.75\text{ m}), which produces a larger clockwise torque and requires a larger cable tension to balance.

  3. Step 3

    Hx=T⋅cos⁡(40.0∘)=426.9⋅0.7660=327 NH_x = T \cdot \cos(40.0^\circ) = 426.9 \cdot 0.7660 = 327\text{ N}

    Correct

    Hx=Tcos⁡40.0∘=(632.7 N)cos⁡40.0∘≈485 NH_x = T \cos 40.0^\circ = (632.7\text{ N})\cos 40.0^\circ \approx 485\text{ N}

    Your horizontal equilibrium equation Hx=Tcos⁡θH_x = T \cos\theta is correct, but your numerical result is affected by the incorrect tension TT from Step 2.

  4. Step 4

    Hy=Wb+Ws−T⋅sin⁡(40.0∘)=548.8−426.9⋅0.6428=274 NH_y = W_b + W_s - T \cdot \sin(40.0^\circ) = 548.8 - 426.9 \cdot 0.6428 = 274\text{ N}

    Correct

    Hy=(Wb+Ws)−Tsin⁡40.0∘=548.8 N−(632.7 N)sin⁡40.0∘≈142 NH_y = (W_b + W_s) - T \sin 40.0^\circ = 548.8\text{ N} - (632.7\text{ N})\sin 40.0^\circ \approx 142\text{ N}

    Your vertical equilibrium relation Hy=Wb+Ws−Tsin⁡θH_y = W_b + W_s - T \sin\theta is correctly set up, but the result is affected by substituting the incorrect tension value.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the gravitational forces of the boom and sign accurately.

You selected the hinge as a convenient pivot point to eliminate the unknown hinge forces from the torque balance.

You correctly resolved the cable tension into horizontal and vertical components.

You applied translational equilibrium conditions in both the xx and yy directions correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Lever Arm for Suspended Load

You assigned the sign the same moment arm (1.00 m1.00\text{ m}) as the boom's center of mass instead of determining its distinct point of application.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the center of mass of a supporting beam with the point of application or center of gravity of external objects attached to it.

REASONING PATH
Your ACEpath teacher’s suggested approach
Locate Each Force Independently
  • Every force in a torque equation must use the perpendicular distance from the chosen pivot to that specific force's line of action.

  • Draw a free-body diagram of the boom alone, mark the exact attachment point or center of gravity for each suspended body, and measure each lever arm separately from the pivot.

Check Point of Application for Symmetric Loads
  • A uniform object supported by two symmetrical points exerts an equivalent single downward force at the midpoint between those support points.

  • Always find the midpoint of the hanger attachment coordinates before writing the torque term for a hanging sign or load.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the torque equation about the hinge with the correct lever arm for the sign: Στ=(Tsin⁡40.0∘)(2.00 m)−(196.0 N)(1.00 m)−(352.8 N)(1.75 m)=0\Sigma \tau = (T \sin 40.0^\circ)(2.00\text{ m}) - (196.0\text{ N})(1.00\text{ m}) - (352.8\text{ N})(1.75\text{ m}) = 0.

  2. Sum the clockwise torques: τgravity=196.0+617.4=813.4 N⋅m\tau_{\text{gravity}} = 196.0 + 617.4 = 813.4\text{ N}\cdot\text{m}.

  3. Solve for tension: T=813.4 N⋅m2.00sin⁡40.0∘ m≈632.7 NT = \frac{813.4\text{ N}\cdot\text{m}}{2.00\sin 40.0^\circ\text{ m}} \approx 632.7\text{ N}.

  4. Calculate horizontal reaction: Hx=Tcos⁡40.0∘=632.7×0.7660≈485 NH_x = T \cos 40.0^\circ = 632.7 \times 0.7660 \approx 485\text{ N}.

  5. Calculate vertical reaction: Hy=(196.0+352.8)−632.7sin⁡40.0∘=548.8−406.7≈142 NH_y = (196.0 + 352.8) - 632.7 \sin 40.0^\circ = 548.8 - 406.7 \approx 142\text{ N}.

Final answer

Hx=485 NH_x = 485\text{ N}, Hy=142 NH_y = 142\text{ N} (acting upward)

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a clear free-body diagram of the boom and label the coordinate of every force before writing Στ=0\Sigma \tau = 0.

  • Distinguish between the boom's own center of mass (L/2L/2) and the attachment points of suspended equipment.

  • Review the flashcards below on lever arm identification and practice similar beam-cable equilibrium problems.

OverviewACEpath Teacher's Diagnosis

02 A student forgets the boom's own weight in the torque and equilibrium equations, accounting only for the hanging sign.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ws=36.0×9.80=352.8 N  ⟹  xs=0.500+2.002=1.25 mW_s = 36.0 \times 9.80 = 352.8\text{ N} \implies x_s = \frac{0.500 + 2.00}{2} = 1.25\text{ m}

  2. Step 2

    ∑τ=T⋅sin⁡(40.0∘)⋅2.00−Ws⋅1.25=0  ⟹  T⋅(1.2856)−441=0  ⟹  T=4411.2856=343.0 N\sum \tau = T \cdot \sin(40.0^\circ) \cdot 2.00 - W_s \cdot 1.25 = 0 \implies T \cdot (1.2856) - 441 = 0 \implies T = \frac{441}{1.2856} = 343.0\text{ N}

    Correct

    (Tsin⁡40.0∘)(2.00 m)−Wb(1.00 m)−Wsxsign=0  ⟹  T≈632.7 N(T \sin 40.0^\circ)(2.00\text{ m}) - W_b(1.00\text{ m}) - W_s x_{\text{sign}} = 0 \implies T \approx 632.7\text{ N}

    You omitted the torque produced by the boom's own weight (Wb=mbg=196.0 NW_b = m_b g = 196.0\text{ N} acting at x=1.00 mx = 1.00\text{ m}). Because this downward force was missing from your rotational balance, your calculated cable tension TT was too low.

  3. Step 3

    Hx=T⋅cos⁡(40.0∘)=343.0⋅0.7660=263 NH_x = T \cdot \cos(40.0^\circ) = 343.0 \cdot 0.7660 = 263\text{ N}

    Correct

    Hx=Tcos⁡40.0∘=(632.7 N)cos⁡40.0∘≈485 NH_x = T \cos 40.0^\circ = (632.7\text{ N})\cos 40.0^\circ \approx 485\text{ N}

    Your horizontal equilibrium setup ∑Fx=Hx−Tcos⁡θ=0\sum F_x = H_x - T\cos\theta = 0 is correct, but the numerical result is affected by the incorrect cable tension TT from Step 2.

  4. Step 4

    Hy=Ws−T⋅sin⁡(40.0∘)=352.8−343.0⋅0.6428=132 NH_y = W_s - T \cdot \sin(40.0^\circ) = 352.8 - 343.0 \cdot 0.6428 = 132\text{ N}

    Correct

    Hy=Wb+Ws−Tsin⁡40.0∘=196.0 N+352.8 N−(632.7 N)sin⁡40.0∘≈142 NH_y = W_b + W_s - T \sin 40.0^\circ = 196.0\text{ N} + 352.8\text{ N} - (632.7\text{ N})\sin 40.0^\circ \approx 142\text{ N}

    You omitted the boom's weight Wb=196.0 NW_b = 196.0\text{ N} from the vertical force balance, which should be ∑Fy=Hy+Tsin⁡θ−Wb−Ws=0\sum F_y = H_y + T\sin\theta - W_b - W_s = 0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the weight of the sign from its mass and the gravitational acceleration.

You correctly resolved the cable tension vector into its horizontal and vertical trigonometric components.

You correctly set up the relationship between the horizontal hinge force and the horizontal component of the cable tension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Boom Weight in Static Equilibrium

You treated the horizontal boom as massless and accounted only for the hanging sign when setting up the torque and vertical force equations.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that a structural member described as 'massive' or 'uniform' has its own gravitational force acting at its geometric center of mass, which must be included in both rotational and translational equilibrium conditions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inventory Every Massive Object
  • Any object assigned a mass mm exerts a downward gravitational force W=mgW = mg acting at its center of gravity.

  • Check off every mass given in the problem statement and verify that its weight vector is drawn on your free-body diagram before writing equations.

Include Beam Weight in Torque Balance
  • For a uniform beam of length LL pivoted at one end, its weight creates a clockwise torque of magnitude τb=Wb(L2)\tau_b = W_b \left(\frac{L}{2}\right).

  • Always add the term −Wb(L2)- W_b \left(\frac{L}{2}\right) to your pivot-at-hinge torque sum whenever the beam has mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the weight of the boom: Wb=mbg=(20.0 kg)(9.80 m/s2)=196.0 NW_b = m_b g = (20.0\text{ kg})(9.80\text{ m/s}^2) = 196.0\text{ N}, acting at the boom's center of mass xb=1.00 mx_b = 1.00\text{ m}.

  2. Set up rotational equilibrium about the hinge: (Tsin⁡40.0∘)(2.00 m)−(196.0 N)(1.00 m)−(352.8 N)(1.75 m)=0(T \sin 40.0^\circ)(2.00\text{ m}) - (196.0\text{ N})(1.00\text{ m}) - (352.8\text{ N})(1.75\text{ m}) = 0.

  3. Solve for the cable tension: T=196.0+617.42.00sin⁡40.0∘=813.41.2856≈632.7 NT = \frac{196.0 + 617.4}{2.00 \sin 40.0^\circ} = \frac{813.4}{1.2856} \approx 632.7\text{ N}.

  4. Apply horizontal equilibrium: Hx=Tcos⁡40.0∘=(632.7 N)cos⁡40.0∘≈485 NH_x = T \cos 40.0^\circ = (632.7\text{ N})\cos 40.0^\circ \approx 485\text{ N}.

  5. Apply vertical equilibrium: Hy=Wb+Ws−Tsin⁡40.0∘=196.0 N+352.8 N−(632.7 N)sin⁡40.0∘≈142 NH_y = W_b + W_s - T \sin 40.0^\circ = 196.0\text{ N} + 352.8\text{ N} - (632.7\text{ N})\sin 40.0^\circ \approx 142\text{ N}.

Final answer

Hx=485 NH_x = 485\text{ N}, Hy=142 NH_y = 142\text{ N} (acting upward)

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a complete free-body diagram of the boom alone, explicitly drawing downward gravity arrows for both the boom at its center and the hanging load.

  • Write out ∑τ=0\sum \tau = 0, ∑Fx=0\sum F_x = 0, and ∑Fy=0\sum F_y = 0 as algebraic expressions with named variables before substituting any numbers.

OverviewACEpath Teacher's Diagnosis

03 A student swaps sine and cosine when resolving the cable tension into components, using cos(40.0°) for the perpendicular lever arm and sin(40.0°) for the horizontal component.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Wb=20.0∗9.80=196 N  ⟹  Ws=36.0∗9.80=352.8 NW_b = 20.0 * 9.80 = 196\text{ N} \implies W_s = 36.0 * 9.80 = 352.8\text{ N}

  2. Step 2

    Στ=T∗cos⁡(40.0∘)∗2.00−196∗1.00−352.8∗1.25=0  ⟹  T∗(1.5321)−637=0  ⟹  T=637/1.5321=415.8 N\Sigma \tau = T * \cos(40.0^\circ) * 2.00 - 196 * 1.00 - 352.8 * 1.25 = 0 \implies T * (1.5321) - 637 = 0 \implies T = 637 / 1.5321 = 415.8\text{ N}

    Correct

    ∑τ=(Tsin⁡40.0∘)(2.00 m)−(196.0 N)(1.00 m)−(352.8 N)(1.25 m)=0  ⟹  T≈495.5 N\sum \tau = (T\sin 40.0^\circ)(2.00\text{ m}) - (196.0\text{ N})(1.00\text{ m}) - (352.8\text{ N})(1.25\text{ m}) = 0 \implies T \approx 495.5\text{ N}

    Because the boom is horizontal and the cable makes an angle of 40.0∘40.0^\circ above the horizontal, the component perpendicular to the boom is Ty=Tsin⁡(40.0∘)T_y = T\sin(40.0^\circ), not Tcos⁡(40.0∘)T\cos(40.0^\circ). You used the cosine component for torque, which led to an incorrect cable tension.

  3. Step 3

    Hx=T∗sin⁡(40.0∘)=415.8∗0.6428=267 NH_x = T * \sin(40.0^\circ) = 415.8 * 0.6428 = 267\text{ N}

    Correct

    Hx=Tcos⁡(40.0∘)=(495.5 N)cos⁡(40.0∘)≈380 NH_x = T\cos(40.0^\circ) = (495.5\text{ N})\cos(40.0^\circ) \approx 380\text{ N}

    In horizontal translational equilibrium, the horizontal reaction force balances the horizontal component of tension, which is Tx=Tcos⁡(40.0∘)T_x = T\cos(40.0^\circ). You swapped cosine with sine here as well.

  4. Step 4

    Hy=548.8−T∗cos⁡(40.0∘)=548.8−415.8∗0.7660=230 NH_y = 548.8 - T * \cos(40.0^\circ) = 548.8 - 415.8 * 0.7660 = 230\text{ N}

    Correct

    Hy=(Wb+Ws)−Tsin⁡(40.0∘)=548.8 N−(495.5 N)sin⁡(40.0∘)≈230 NH_y = (W_b + W_s) - T\sin(40.0^\circ) = 548.8\text{ N} - (495.5\text{ N})\sin(40.0^\circ) \approx 230\text{ N}

    For vertical translational equilibrium, the upward vertical component of tension is Ty=Tsin⁡(40.0∘)T_y = T\sin(40.0^\circ). You mistakenly subtracted Tcos⁡(40.0∘)T\cos(40.0^\circ) instead.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the gravitational forces WbW_b and WsW_s from the given masses.

You correctly positioned the boom's center of mass at half its length (1.00 m1.00\text{ m}).

You correctly determined the sign's center of gravity midway between the two hanger attachments at x=1.25 mx = 1.25\text{ m}.

You set up the general equilibrium conditions ∑τ=0\sum \tau = 0, ∑Fx=0\sum F_x = 0, and ∑Fy=0\sum F_y = 0 systematically.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap

You resolved the cable tension using cosine for the vertical/perpendicular component and sine for the horizontal component, reversing standard Cartesian projections for an angle measured from the horizontal.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing which trigonometric function pairs with adjacent versus opposite sides when resolving an inclined force. For an angle θ\theta measured relative to a horizontal reference line, the adjacent side along the horizontal is Tcos⁡θT\cos\theta, while the opposite side perpendicular to the boom is Tsin⁡θT\sin\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Angle Reference
  • When an angle θ\theta is given with respect to the horizontal, the adjacent horizontal side is Fcos⁡θF\cos\theta and the opposite vertical side is Fsin⁡θF\sin\theta.

  • Draw a right triangle around the force vector T⃗\vec{T} and identify which leg is opposite θ\theta (vertical →sin⁡θ\rightarrow \sin\theta) and which leg is adjacent to θ\theta (horizontal →cos⁡θ\rightarrow \cos\theta).

Perpendicular Force for Torque
  • The torque on a horizontal lever arm of length LL is τ=F⊥L=(Tsin⁡θ)L\tau = F_\perp L = (T\sin\theta) L.

  • Ensure that the component entering the torque equation about the hinge is purely perpendicular to the boom.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the torque balance about the hinge: ∑τ=(Tsin⁡40.0∘)(2.00 m)−(196.0 N)(1.00 m)−(352.8 N)(1.25 m)=0\sum \tau = (T\sin 40.0^\circ)(2.00\text{ m}) - (196.0\text{ N})(1.00\text{ m}) - (352.8\text{ N})(1.25\text{ m}) = 0.

  2. Calculate the net downward torque: 196.0 N⋅m+441.0 N⋅m=637.0 N⋅m196.0\text{ N}\cdot\text{m} + 441.0\text{ N}\cdot\text{m} = 637.0\text{ N}\cdot\text{m}.

  3. Solve for the cable tension: T=637.0 N⋅m2.00sin⁡40.0∘ m=637.01.2856≈495.5 NT = \frac{637.0\text{ N}\cdot\text{m}}{2.00\sin 40.0^\circ\text{ m}} = \frac{637.0}{1.2856} \approx 495.5\text{ N}.

  4. Apply horizontal equilibrium ∑Fx=0\sum F_x = 0: Hx=Tcos⁡40.0∘=(495.5 N)cos⁡40.0∘≈380 NH_x = T\cos 40.0^\circ = (495.5\text{ N})\cos 40.0^\circ \approx 380\text{ N}.

  5. Apply vertical equilibrium ∑Fy=0\sum F_y = 0: Hy=(196.0+352.8) N−(495.5 N)sin⁡40.0∘=548.8 N−318.5 N≈230 NH_y = (196.0 + 352.8)\text{ N} - (495.5\text{ N})\sin 40.0^\circ = 548.8\text{ N} - 318.5\text{ N} \approx 230\text{ N} (acting upward).

Final answer

Hx=380 NH_x = 380\text{ N}, Hy=230 NH_y = 230\text{ N} (acting upward) [Note: Using the problem's hanger midpoint x=1.25 mx = 1.25\text{ m} gives Hx=380 N,Hy=230 NH_x = 380\text{ N}, H_y = 230\text{ N}; if xsign=1.75 mx_{\text{sign}} = 1.75\text{ m} is assumed, Hx=485 N,Hy=142 NH_x = 485\text{ N}, H_y = 142\text{ N}].

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching the right-triangle component breakdown directly on every inclined force vector before writing equilibrium equations.

  • Verify your torque expressions by asking: 'Does this component act at 90∘90^\circ to the lever arm?'

  • Complete the targeted flashcards and practice drills on vector component resolution.

Lock it in

Similar question

01

A uniform horizontal rod of mass m=10.0 kgm = 10.0\text{ kg} and length L=4.00 mL = 4.00\text{ m} is hinged at the wall (x=0x = 0). A heavy tool box of mass M=25.0 kgM = 25.0\text{ kg} rests on the rod at x=3.00 mx = 3.00\text{ m}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find the total clockwise torque exerted about the hinge by gravity.

Answer

τ=931 N⋅m\tau = 931\text{ N}\cdot\text{m}. Key steps: The rod's weight acts at x=2.00 mx = 2.00\text{ m} with torque τr=(10.0)(9.80)(2.00)=196.0 N⋅m\tau_r = (10.0)(9.80)(2.00) = 196.0\text{ N}\cdot\text{m}. The tool box acts at x=3.00 mx = 3.00\text{ m} with torque τb=(25.0)(9.80)(3.00)=735.0 N⋅m\tau_b = (25.0)(9.80)(3.00) = 735.0\text{ N}\cdot\text{m}. Total torque τ=196.0+735.0=931 N⋅m\tau = 196.0 + 735.0 = 931\text{ N}\cdot\text{m}.

02

A light rigid boom of length L=3.00 mL = 3.00\text{ m} (negligible mass) is hinged at x=0x = 0 and supported horizontally by a cable attached at x=3.00 mx = 3.00\text{ m} at an angle of 30.0∘30.0^\circ above the horizontal. A uniform display board weighing 600 N600\text{ N} is suspended from hangers at x1=1.00 mx_1 = 1.00\text{ m} and x2=2.50 mx_2 = 2.50\text{ m}. Find the cable tension TT and the horizontal reaction force HxH_x at the hinge.

Answer

T=700 NT = 700\text{ N}, Hx=606 NH_x = 606\text{ N}. Key steps: The sign's center of gravity is at x=1.00+2.502=1.75 mx = \frac{1.00 + 2.50}{2} = 1.75\text{ m}. Torque balance about the hinge gives (Tsin⁡30.0∘)(3.00)=(600)(1.75)=1050 N⋅m(T\sin 30.0^\circ)(3.00) = (600)(1.75) = 1050\text{ N}\cdot\text{m}, yielding T=10501.50=700 NT = \frac{1050}{1.50} = 700\text{ N}. Horizontal force balance gives Hx=Tcos⁡30.0∘=700cos⁡30.0∘≈606 NH_x = T\cos 30.0^\circ = 700\cos 30.0^\circ \approx 606\text{ N}.

03

A uniform beam of mass mb=15.0 kgm_b = 15.0\text{ kg} and length L=2.50 mL = 2.50\text{ m} is hinged at the wall and held horizontally by a tie rod at an angle of 45.0∘45.0^\circ at the beam's outer tip (x=2.50 mx = 2.50\text{ m}). A motor of mass M=40.0 kgM = 40.0\text{ kg} is mounted across the section from x=1.50 mx = 1.50\text{ m} to x=2.10 mx = 2.10\text{ m} (center of mass at 1.80 m1.80\text{ m}). Using g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the vertical component of the reaction force HyH_y exerted by the hinge on the beam.

Answer

Hy=96.0 NH_y = 96.0\text{ N} (acting upward). Key steps: Wb=(15.0)(9.80)=147 NW_b = (15.0)(9.80) = 147\text{ N} at x=1.25 mx = 1.25\text{ m}; Wm=(40.0)(9.80)=392 NW_m = (40.0)(9.80) = 392\text{ N} at x=1.80 mx = 1.80\text{ m}. Torque about the hinge: (Tsin⁡45.0∘)(2.50)=(147)(1.25)+(392)(1.80)=183.75+705.6=889.35 N⋅m  ⟹  Tsin⁡45.0∘=889.352.50=355.74 N(T\sin 45.0^\circ)(2.50) = (147)(1.25) + (392)(1.80) = 183.75 + 705.6 = 889.35\text{ N}\cdot\text{m} \implies T\sin 45.0^\circ = \frac{889.35}{2.50} = 355.74\text{ N}. Vertical force balance: Hy=(Wb+Wm)−Tsin⁡45.0∘=(147+392)−355.74=539−355.74≈96.0 NH_y = (W_b + W_m) - T\sin 45.0^\circ = (147 + 392) - 355.74 = 539 - 355.74 \approx 96.0\text{ N} upward.

Loading workspace…