Resources

Two identical small metal spheres AA and BB, each of mass m=2.50×10−3 kgm = 2.50 \times 10^{-3}\text{ kg}, are held fixed in vacuum separated by a center-to-center distance d=0.300 md = 0.300\text{ m}. Initially, sphere AA carries charge qA=+6.00 μCq_A = +6.00\,\mu\mathrm{C} and sphere BB carries charge qB=−2.00 μCq_B = -2.00\,\mu\mathrm{C}. While fixed, a thin, negligible-capacitance conducting wire briefly connects the two spheres and is then removed. Both spheres are then simultaneously released from rest and accelerate purely due to their mutual electrostatic repulsion. Using the conservation of electric charge and the work-energy theorem, determine the final speed vv of each sphere when their separation distance approaches infinity (d→∞d \to \infty). Use ke=8.988×109 N⋅m2/C2k_e = 8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2.

Answer and steps

Final answer

v=4.90 m/sv = 4.90\text{ m/s}

Steps

01

Determine the charge on each sphere after connection

By the principle of conservation of electric charge, the total charge of the isolated two-sphere system remains constant before and after they are connected:

Qtotal=qA+qB=(+6.00 μC)+(−2.00 μC)=+4.00 μCQ_{\text{total}} = q_A + q_B = (+6.00\text{ }\mu\text{C}) + (-2.00\text{ }\mu\text{C}) = +4.00\text{ }\mu\text{C}

Because the two metal spheres are identical, the total charge redistributes equally between them when connected by the conducting wire:

q=Qtotal2=+4.00 μC2=+2.00 μC=2.00×10−6 Cq = \frac{Q_{\text{total}}}{2} = \frac{+4.00\text{ }\mu\text{C}}{2} = +2.00\text{ }\mu\text{C} = 2.00 \times 10^{-6}\text{ C}

After the wire is removed, both spheres carry an identical positive charge q=+2.00 μCq = +2.00\text{ }\mu\text{C}, resulting in a mutual electrostatic repulsive force.


02

Apply the Work-Energy Theorem

When both spheres are released from rest, each accelerates outwards towards infinity purely under the mutual Coulomb repulsion.

By symmetry with respect to the system's center, the repulsive force acting on each sphere at position coordinate xx is:

F(x)=keq2(2x)2=keq24x2F(x) = \frac{k_e q^2}{(2x)^2} = \frac{k_e q^2}{4x^2}

The work WW done by this electrostatic force on each sphere as it moves from its initial position parameter x=dx = d to infinity (x→∞x \to \infty) is:

W=∫d∞F(x) dx=∫d∞keq24x2 dx=[−keq24x]d∞=keq24dW = \int_{d}^{\infty} F(x)\,dx = \int_{d}^{\infty} \frac{k_e q^2}{4x^2}\,dx = \left[ -\frac{k_e q^2}{4x} \right]_{d}^{\infty} = \frac{k_e q^2}{4d}

According to the work-energy theorem, the net work done on each sphere equals the change in its kinetic energy (ΔK=Kf−Ki\Delta K = K_f - K_i). Since each sphere starts from rest (Ki=0K_i = 0):

W=12mv2W = \frac{1}{2}mv^2

Equating the work to the kinetic energy yields:

12mv2=keq24d\frac{1}{2}mv^2 = \frac{k_e q^2}{4d}

Solving for the final speed vv:

v=keq22mdv = \sqrt{\frac{k_e q^2}{2md}}


03

Calculate the numerical value of vv

Substitute the given numerical quantities into the expression:

  • ke=8.988×109 N⋅m2/C2k_e = 8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2
  • q=2.00×10−6 Cq = 2.00 \times 10^{-6}\text{ C}
  • m=2.50×10−3 kgm = 2.50 \times 10^{-3}\text{ kg}
  • d=0.300 md = 0.300\text{ m}

v=(8.988×109)(2.00×10−6)22(2.50×10−3)(0.300)v = \sqrt{\frac{(8.988 \times 10^9)(2.00 \times 10^{-6})^2}{2(2.50 \times 10^{-3})(0.300)}}

v=0.0359521.50×10−3=23.968≈4.90 m/sv = \sqrt{\frac{0.035952}{1.50 \times 10^{-3}}} = \sqrt{23.968} \approx 4.90\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student attributes all the released potential energy to a single sphere instead of accounting for the kinetic energy of both moving spheres, resulting in a speed that is too large by a factor of √2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    q=qA+qB2=(+6.00×10−6−2.00×10−6)2=2.00×10−6 Cq = \frac{q_A + q_B}{2} = \frac{(+6.00 \times 10^{-6} - 2.00 \times 10^{-6})}{2} = 2.00 \times 10^{-6}\text{ C}

  2. Step 2

    U=keq2d=(8.988×109)(2.00×10−6)20.300=0.11984 JU = \frac{k_e q^2}{d} = \frac{(8.988 \times 10^9)(2.00 \times 10^{-6})^2}{0.300} = 0.11984\text{ J}

  3. Step 3

    12mv2=U  ⟹  v=2Um=2×0.119840.00250≈9.79 m/s\frac{1}{2}mv^2 = U \implies v = \sqrt{\frac{2U}{m}} = \sqrt{\frac{2 \times 0.11984}{0.00250}} \approx 9.79\text{ m/s}

    Correct

    Ktotal=KA+KB=2(12mv2)=mv2=U  ⟹  v=Um=0.11984 J2.50×10−3 kg≈6.92 m/sK_{\text{total}} = K_A + K_B = 2\left(\frac{1}{2}mv^2\right) = mv^2 = U \implies v = \sqrt{\frac{U}{m}} = \sqrt{\frac{0.11984\text{ J}}{2.50 \times 10^{-3}\text{ kg}}} \approx 6.92\text{ m/s}

    You set the kinetic energy of just one sphere equal to the total potential energy UU. Because both spheres are released from rest and move symmetrically away from each other, both spheres gain kinetic energy: Ktotal=12mv2+12mv2=mv2K_{\text{total}} = \frac{1}{2}mv^2 + \frac{1}{2}mv^2 = mv^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the principle of conservation of charge to find the post-contact charge on each identical sphere.

You correctly computed the initial electrostatic potential energy of the two-sphere system using Coulomb's law.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting kinetic energy of the second moving body

You equated the total potential energy of the system to the kinetic energy of one sphere rather than dividing it between both accelerating spheres.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In an isolated two-body system where both objects are free to move, the initial potential energy converts into the combined kinetic energy of both bodies (Ktotal=KA+KBK_{\text{total}} = K_A + K_B). Treating one sphere as absorbing the entire potential energy overestimates its final speed by a factor of 2\sqrt{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for all moving bodies in the energy budget
  • For an isolated system released from rest, conservation of mechanical energy requires ΔU+∑Ki=0\Delta U + \sum K_i = 0, meaning Uinitial=K1,f+K2,fU_{\text{initial}} = K_{1,f} + K_{2,f}.

  • Always check whether both objects move after release. If both accelerate symmetrically, write Ktotal=2×(12mv2)=mv2K_{\text{total}} = 2 \times \left(\frac{1}{2}mv^2\right) = mv^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State conservation of mechanical energy for the isolated two-sphere system: Ei=Ef  ⟹  U=KA+KBE_i = E_f \implies U = K_A + K_B.

  2. By symmetry and momentum conservation, both identical spheres move at the same speed vv in opposite directions, giving KA=KB=12mv2K_A = K_B = \frac{1}{2}mv^2.

  3. Express total kinetic energy as Ktotal=2(12mv2)=mv2K_{\text{total}} = 2\left(\frac{1}{2}mv^2\right) = mv^2.

  4. Equate kinetic energy to initial potential energy: mv2=U  ⟹  v=Ummv^2 = U \implies v = \sqrt{\frac{U}{m}}.

  5. Substitute the numerical values: v=0.11984 J2.50×10−3 kg=47.936≈6.92 m/sv = \sqrt{\frac{0.11984\text{ J}}{2.50 \times 10^{-3}\text{ kg}}} = \sqrt{47.936} \approx 6.92\text{ m/s}.

Final answer

v≈6.92 m/sv \approx 6.92\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review two-body energy conservation problems to ensure kinetic energy terms for all moving particles are included.

  • Check each particle's equation of motion using the work-energy theorem (Won single sphere=12mv2=12UW_{\text{on single sphere}} = \frac{1}{2}mv^2 = \frac{1}{2}U) to cross-check system energy conservation.

OverviewACEpath Teacher's Diagnosis

02 The student adds the magnitudes of the initial charges rather than taking their algebraic sum when the spheres are connected, resulting in an incorrect redistributed charge of 4.00 μC per sphere.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q=∣qA∣+∣qB∣2=6.00×10−6+2.00×10−62=4.00×10−6 Cq = \frac{|q_A| + |q_B|}{2} = \frac{6.00 \times 10^{-6} + 2.00 \times 10^{-6}}{2} = 4.00 \times 10^{-6}\text{ C}

    Correct

    q=qA+qB2=(+6.00 μC)+(−2.00 μC)2=+2.00 μC=2.00×10−6 Cq = \frac{q_A + q_B}{2} = \frac{(+6.00\text{ }\mu\text{C}) + (-2.00\text{ }\mu\text{C})}{2} = +2.00\text{ }\mu\text{C} = 2.00 \times 10^{-6}\text{ C}

    Electric charge is an algebraic, signed scalar quantity. When two identical conductors make electrical contact, opposite charges neutralize each other, so the net charge is qA+qBq_A + q_B, not ∣qA∣+∣qB∣|q_A| + |q_B|.

  2. Step 2

    U=keq2d=(8.988×109)(4.00×10−6)20.300=0.47936 JU = \frac{k_e q^2}{d} = \frac{(8.988 \times 10^9)(4.00 \times 10^{-6})^2}{0.300} = 0.47936\text{ J}

    Correct

    U=keq2d=(8.988×109)(2.00×10−6)20.300≈0.1198 JU = \frac{k_e q^2}{d} = \frac{(8.988 \times 10^9)(2.00 \times 10^{-6})^2}{0.300} \approx 0.1198\text{ J}

    You correctly formulated the electrostatic potential energy expression, but this calculation was affected by substituting the incorrect charge from Step 1.

  3. Step 3

    mv2=U  ⟹  v=Um=0.479360.00250≈13.8 m/sm v^2 = U \implies v = \sqrt{\frac{U}{m}} = \sqrt{\frac{0.47936}{0.00250}} \approx 13.8\text{ m/s}

    Correct

    v=keq22md=(8.988×109)(2.00×10−6)22(2.50×10−3)(0.300)≈4.90 m/sv = \sqrt{\frac{k_e q^2}{2md}} = \sqrt{\frac{(8.988 \times 10^9)(2.00 \times 10^{-6})^2}{2(2.50 \times 10^{-3})(0.300)}} \approx 4.90\text{ m/s}

    Your algebraic manipulation and arithmetic were executed properly, but the resulting numerical speed is affected by using the incorrect charge and potential energy from previous steps.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that identical conducting spheres share the total available charge equally.

You correctly related the electrostatic potential energy to the kinetic energy of the accelerating spheres.

You carried out the algebraic substitution and square root calculations accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Adding charge magnitudes instead of algebraic sum

You took the absolute values of the two charges before averaging them, writing ∣qA∣+∣qB∣2\frac{|q_A| + |q_B|}{2} instead of summing their signed values.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated electric charge as an unsigned magnitude rather than a signed scalar quantity, missing the fact that opposite charges partially cancel when conducting bodies touch.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conservation of Charge as an Algebraic Sum
  • The total charge of an isolated system is Qtotal=∑qi=qA+qBQ_{\text{total}} = \sum q_i = q_A + q_B, strictly respecting the positive and negative signs.

  • Keep the negative sign when writing down qB=−2.00 μCq_B = -2.00\text{ }\mu\text{C}.

Charge Redistribution on Identical Conductors
  • When two identical conducting spheres touch, each carries half of the net charge: q=qA+qB2q = \frac{q_A + q_B}{2}.

  • Compute (+6.00 μC)+(−2.00 μC)=+4.00 μC(+6.00\text{ }\mu\text{C}) + (-2.00\text{ }\mu\text{C}) = +4.00\text{ }\mu\text{C}, yielding q=+2.00 μCq = +2.00\text{ }\mu\text{C} per sphere.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the net charge using the algebraic sum: Qtotal=(+6.00 μC)+(−2.00 μC)=+4.00 μCQ_{\text{total}} = (+6.00\text{ }\mu\text{C}) + (-2.00\text{ }\mu\text{C}) = +4.00\text{ }\mu\text{C}.

  2. Divide by 2 for identical spheres: q=+4.00 μC2=+2.00 μC=2.00×10−6 Cq = \frac{+4.00\text{ }\mu\text{C}}{2} = +2.00\text{ }\mu\text{C} = 2.00 \times 10^{-6}\text{ C}.

  3. Calculate the work done on each sphere: W=keq24d=(8.988×109)(2.00×10−6)24(0.300)≈0.02996 JW = \frac{k_e q^2}{4d} = \frac{(8.988 \times 10^9)(2.00 \times 10^{-6})^2}{4(0.300)} \approx 0.02996\text{ J}.

  4. Equate work to kinetic energy 12mv2=W\frac{1}{2}mv^2 = W and solve for vv: v=keq22md=0.0359521.50×10−3≈4.90 m/sv = \sqrt{\frac{k_e q^2}{2md}} = \sqrt{\frac{0.035952}{1.50 \times 10^{-3}}} \approx 4.90\text{ m/s}.

Final answer

v≈4.90 m/sv \approx 4.90\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out charges with their explicit signs (++ and −-) before summing them.

  • Remember that touching a positively charged object with a negatively charged object causes neutralization, which decreases the total charge magnitude.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to take the square root of v² when solving the kinetic energy relation, reporting v² directly as the final speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    q=(+6.00×10−6−2.00×10−6)2=2.00×10−6 Cq = \frac{(+6.00 \times 10^{-6} - 2.00 \times 10^{-6})}{2} = 2.00 \times 10^{-6}\text{ C}

  2. Step 2

    U=(8.988×109)(2.00×10−6)20.300=0.11984 JU = \frac{(8.988 \times 10^9)(2.00 \times 10^{-6})^2}{0.300} = 0.11984\text{ J}

  3. Step 3

    mv2=Um v^2 = U

  4. Step 4

    v=Um=0.119840.00250=47.9 m/sv = \frac{U}{m} = \frac{0.11984}{0.00250} = 47.9\text{ m/s}

    Correct

    v=Um=0.11984 J2.50×10−3 kg≈4.90 m/sv = \sqrt{\frac{U}{m}} = \sqrt{\frac{0.11984\text{ J}}{2.50 \times 10^{-3}\text{ kg}}} \approx 4.90\text{ m/s}

    When solving mv2=Um v^2 = U, dividing both sides by mm gives v2=Umv^2 = \frac{U}{m}. You forgot to take the square root to solve for vv, which gave the numerical value of v2v^2 instead of vv.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used charge conservation to find the final charge on each identical sphere.

You calculated the total electric potential energy accurately.

You correctly accounted for both spheres moving to formulate mv2=Um v^2 = U.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root in kinetic energy

You dropped the exponent on v2v^2 in the algebraic rearrangement, computing v=Umv = \frac{U}{m} instead of v=Umv = \sqrt{\frac{U}{m}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the quadratic power in kinetic energy (K=12mv2K = \frac{1}{2}m v^2) when performing algebraic inversion, resulting in solving for v2v^2 rather than taking the final square root.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Powers During Inversion
  • If an equation has v2v^2, dividing by the coefficient yields v2v^2, requiring a square root: mv2=U  ⟹  v2=Um  ⟹  v=Umm v^2 = U \implies v^2 = \frac{U}{m} \implies v = \sqrt{\frac{U}{m}}.

  • Always write the intermediate step v2=…v^2 = \dots before taking the square root to prevent dropping the exponent.

Dimensional and Magnitude Check
  • Units of Um=Jkg=m2/s2\frac{U}{m} = \frac{\text{J}}{\text{kg}} = \text{m}^2/\text{s}^2, not m/s\text{m}/\text{s}.

  • Verify that your expression matches velocity units before substituting numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both sides by mm: v2=Umv^2 = \frac{U}{m}

  2. Take the square root of both sides: v=Umv = \sqrt{\frac{U}{m}}

  3. Substitute U=0.11984 JU = 0.11984\text{ J} and m=2.50×10−3 kgm = 2.50 \times 10^{-3}\text{ kg}: v=0.119842.50×10−3=47.936≈4.90 m/sv = \sqrt{\frac{0.11984}{2.50 \times 10^{-3}}} = \sqrt{47.936} \approx 4.90\text{ m/s}

Final answer

v≈4.90 m/sv \approx 4.90\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include an explicit v2=…v^2 = \dots line in your scratch work whenever solving kinetic energy relations.

  • Check units for intermediate quantities: J/kg\text{J}/\text{kg} corresponds to speed squared (m2/s2)(\text{m}^2/\text{s}^2), which signals the need for a square root.

Lock it in

Similar question

01

Two identical beads, each of mass m=0.010 kgm = 0.010\text{ kg}, are released from rest in deep space when their mutual electrostatic potential energy is 0.18 J0.18\text{ J}. Find the final speed of each bead when they are far apart.

Answer

v≈4.24 m/sv \approx 4.24\text{ m/s}. Both beads move symmetrically, so total kinetic energy is Ktotal=2(12mv2)=mv2K_{\text{total}} = 2\left(\frac{1}{2}mv^2\right) = mv^2. By conservation of energy, mv2=U=0.18 Jmv^2 = U = 0.18\text{ J}, giving v=0.18/0.010=18≈4.24 m/sv = \sqrt{0.18 / 0.010} = \sqrt{18} \approx 4.24\text{ m/s}.

02

Two charged particles with masses mm and 3m3m are released from rest from a separation distance dd. Their initial mutual potential energy is U0U_0. In terms of U0U_0 and mm, find the final speed of the lighter particle mm at infinite separation.

Answer

v1=3U02mv_1 = \sqrt{\frac{3U_0}{2m}}. By conservation of momentum, mv1=3mv2  ⟹  v2=13v1m v_1 = 3m v_2 \implies v_2 = \frac{1}{3}v_1. Total kinetic energy is K=12mv12+12(3m)(v13)2=23mv12K = \frac{1}{2}m v_1^2 + \frac{1}{2}(3m)\left(\frac{v_1}{3}\right)^2 = \frac{2}{3}m v_1^2. Setting 23mv12=U0\frac{2}{3}m v_1^2 = U_0 gives v1=3U02mv_1 = \sqrt{\frac{3U_0}{2m}}.

03

Two identical conducting spheres, each of mass m=4.00×10−3 kgm = 4.00 \times 10^{-3}\text{ kg}, initially carry charges +8.00 μC+8.00\text{ }\mu\text{C} and −4.00 μC-4.00\text{ }\mu\text{C} at a center-to-center separation d=0.200 md = 0.200\text{ m}. They are briefly connected by a thin wire and then released simultaneously from rest. Calculate the speed of each sphere at infinite separation. (ke=8.988×109 N⋅m2/C2k_e = 8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2).

Answer

v≈3.19 m/sv \approx 3.19\text{ m/s}. After connection, each sphere carries charge q=+8.00−4.002=+2.00 μCq = \frac{+8.00 - 4.00}{2} = +2.00\text{ }\mu\text{C}. Initial potential energy is U=keq2d=(8.988×109)(2.00×10−6)20.200=0.040746 JU = \frac{k_e q^2}{d} = \frac{(8.988 \times 10^9)(2.00 \times 10^{-6})^2}{0.200} = 0.040746\text{ J}. Since both spheres accelerate symmetrically, Ktotal=mv2=UK_{\text{total}} = mv^2 = U. Thus v=0.0407464.00×10−3≈3.19 m/sv = \sqrt{\frac{0.040746}{4.00 \times 10^{-3}}} \approx 3.19\text{ m/s}.

Loading workspace…