Resources
An insulated copper block of mass initially at temperature () is dropped into a thermally insulated container holding of liquid water at (). The specific heat capacity of copper is and that of water is . Assuming no heat is exchanged with the container walls or the external environment, calculate: (a) the final thermal equilibrium temperature of the mixture in Kelvin, and (b) the total entropy change of this irreversible thermal equilibration process in .
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Determining the Final Equilibrium Temperature
When the hot copper block is placed into the colder water inside a thermally insulated system, no heat is exchanged with the surroundings:
Equivalently, the heat released by the cooling copper equals the heat absorbed by the warming water:
-
Calculate the heat capacities of each component:
- Copper:
- Water:
-
Solve for the equilibrium temperature :
Substitute the initial absolute temperatures ( and ):
(Note: This corresponds to approximately .)
Part (b): Calculating the Total Entropy Change
Because thermal equilibration occurs via irreversible heat transfer across a finite temperature difference, the total entropy change of the isolated universe is the sum of the entropy changes of the copper and the water:
For a substance of constant specific heat capacity changing temperature from to , the entropy change is:
- Entropy change of the copper block (): The copper loses heat, so its entropy decreases.
- Entropy change of the water (): The water gains heat at a lower temperature, so its entropy increases.
- Total entropy change ():
Key Takeaway & Pitfall
- Second Law of Thermodynamics: Heat flows spontaneously from a higher temperature to a lower temperature. Because heat is transferred into the cooler body at a lower temperature than that from which it left (), the positive entropy change of the colder body exceeds the magnitude of the negative entropy change of the hotter body: .
- Common Pitfall: Never use Celsius temperatures in the logarithmic entropy formula or write with a single constant temperature. The temperatures must always be in Kelvin (), and because temperature varies continuously during heat exchange, integration yields the logarithmic ratio .
Typical errors
01 The student calculates entropy change using ΔS = Q / T with an initial or final temperature instead of integrating dQ / T as temperature varies.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The formula applies only to isothermal processes where temperature is constant (such as phase changes or ideal thermal reservoirs). Because the temperature of both the copper block and the water varies continuously during thermal equilibration, you must integrate to obtain .
- Step 3Correct
Your method of summing the two entropy changes was logically sound, but the final numerical value was affected by using the constant-temperature approximation in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the heat balance equation to find the final equilibrium temperature.
You correctly recognized that the total entropy change of the universe equals the sum of the entropy changes of the copper block and the water.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou evaluated using the initial temperature in the denominator instead of accounting for continuous temperature variation.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing an isothermal heat transfer process (where holds because is constant) with a thermal equilibration process where the temperature of a finite body changes continuously as heat is transferred.
REASONING PATH
Your ACEpath teacher’s suggested approach- Constant $T$ vs. Varying $T$
For an isothermal process or ideal reservoir at constant temperature , . For a substance with heat capacity undergoing a temperature change from to , .
Check whether the system changes temperature during heat exchange. If changes, always use the logarithmic integration formula.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the entropy change of the cooling copper: .
Calculate the entropy change of the warming water: .
Sum the entropy changes: .
(a) ; (b)
02 The student misapplies the temperature ratio in the logarithmic entropy formula by using temperatures in Celsius instead of absolute temperatures in Kelvin.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Thermodynamic entropy is defined via , where must be an absolute thermodynamic temperature in Kelvin. Taking the ratio of temperatures in degrees Celsius yields an incorrect ratio because the Celsius scale has an arbitrary non-zero zero point.
- Step 3Correct
You repeated the same error here by using Celsius temperatures in the logarithmic ratio instead of Kelvin values ( and ).
- Step 4Correct
Your addition method is conceptually sound, but the final sum is incorrect because it uses the erroneous component values from the previous steps.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly established the thermal energy balance equation between the two substances.
You accurately solved for the final equilibrium temperature in Kelvin.
You recognized that total entropy change is the sum of the entropy changes of the two components.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou deliberately converted your correct Kelvin temperature into Celsius before substituting it into .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing temperature differences () with temperature ratios (). While a change of equals a change of when subtracting, ratios and logarithmic arguments are not invariant under scale shifts and require absolute temperatures in Kelvin.
REASONING PATH
Your ACEpath teacher’s suggested approach- Absolute Temperature Requirement
Thermodynamic formulas involving absolute temperature or temperature ratios strictly require temperatures in Kelvin.
Always keep temperatures in Kelvin when evaluating , , or ideal gas laws.
- Difference vs. Ratio Invariance
is identical in Celsius and Kelvin, but is never equal in Celsius and Kelvin.
Only substitute Celsius directly when an expression contains solely a raw linear difference .
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the entropy change of copper using Kelvin: .
Evaluate the entropy change of water using Kelvin: .
Sum the component entropy changes: .
(a) ; (b)
03 The student uses a simple arithmetic mean of the initial temperatures rather than weighting by heat capacities.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You calculated as the simple unweighted mean of and . Because the total heat capacity of the water () is nearly twenty times that of the copper (), the equilibrium temperature must be determined by heat conservation, , which pulls much closer to the initial water temperature.
- Step 2Correct
You selected the correct thermodynamic relation for the entropy change of a cooling substance with constant heat capacity, and your arithmetic was accurate for your value of . However, this result is numerically affected by the incorrect value of from Step 1.
- Step 3Correct
Your formula and calculation method for the entropy change of the warming water were completely correct, but the numerical answer is carried over from the incorrect from Step 1.
- Step 4Correct
You correctly added the individual entropy changes to determine the total entropy change of the universe, but the value is incorrect due to the propagated error from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the integral form to account for continuous temperature changes during heat exchange.
You correctly identified absolute temperatures in Kelvin for evaluating the entropy ratios.
You recognized that the total entropy change of an isolated system is the algebraic sum of the entropy changes of its components.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the final temperature as the simple midpoint instead of weighting the temperatures by heat capacities.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the first law of thermodynamics () in thermal mixing, assuming that thermal equilibrium corresponds to the geometric or arithmetic midpoint of temperatures rather than a heat-capacity-weighted average.
REASONING PATH
Your ACEpath teacher’s suggested approach- Thermal Equilibrium via First Law
For an insulated system, total heat exchanged is zero: .
Always compute the heat capacities first and solve .
- Reality Check on Equilibrium Temperature
A body with a much larger heat capacity () resists temperature changes more strongly.
Check whether lies much closer to the initial temperature of the object with the larger heat capacity.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the total heat capacities of each substance: and .
Apply energy conservation : .
Recalculate copper entropy change: .
Recalculate water entropy change: .
Find total entropy change: .
(a) ; (b)
Lock it in
When can you calculate entropy change using , and when must you use ?
Use only when temperature remains strictly constant (e.g., phase change or large reservoir). Use whenever a substance warms or cools over a temperature range.
Similar question
A piece of iron with specific heat capacity cools from to . Calculate its change in entropy .
Answer
.
An ideal heat reservoir at a constant temperature of transfers of heat to a second reservoir at a constant temperature of . Calculate the total entropy change of the universe .
Answer
Since both reservoirs maintain constant temperatures: .
A block of aluminum () at is dropped into an enormous lake whose temperature remains constant at . Calculate: (a) the heat transferred from the aluminum to the lake, (b) the entropy change of the aluminum, (c) the entropy change of the lake, and (d) .
Answer
(a) . (b) Aluminum cools with varying : . (c) Lake is a constant-temperature reservoir: . (d) .